Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab.  PC’s are listed Under Client Name by their computer name.  Take Note of the corresponding
ID.  We will use this to locate the Printer information in the Event Log.  
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.  
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client.  The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.”  Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint.  I would try the  the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.

Similar Messages

  • Redirected Printer is not working

    Hello all,
    We have a Windows Server 2012 R2 terminal server. We have set up two Lenovo thin clients to remote access this terminal server. The problem is that the redirected printer is not working on one of the thin client but works on the other one. I have made the
    same settings on both of the thin clients.
    The difference between these two thin clients is like following.
    1. Printer: The one that is working is Canon printer and the one that is not working is HP printer.
    2. They use different ISPs.
    All other settings are the same. I did not find any error code from the event viewer too. The only thing that I have is this error message when I tried to print a test page. "Test page failed to print. Would you like to view the print troubleshooter
    for assistance?" And when I click "Yes", it said I did not have the related service installed and I could not find the error code for this issue.
    Does anyone have any ideas on this issue? Please share this.
    Thank you very much.

    Thank you for posting in Windows Server Forum.
    Based on your description it seems that there is issue with incompatible print driver. As you commented you can access for canon but not for HP. Please see that you have update version of HP driver is installed. If possible try to use RDS universal printer
    driver and verify.
    How to configure Microsoft RDS Universal Printing
    Does this happen for any specific user or for all users? If this happen for any particular user then there might be issue with user profile got corrupt so need to clear user profile cache or delete it and re-login to check the result.
    Hope it helps!
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Hp1022n printer doesn't working on windows 2008 R2 x64 via RDP from windows 7

    Dear Sir,
    i have a network of some windows7 and some server 2008 r2 Terminal Services,  There is
    a hp 1022n  printer . when i print locally from windows7 , the
    print comes very smoothly but no printing from windows Server 2008 R2 via RDP. i had installed driver for hp
    1022n + (windows 7 x64) on server 2008 r2 but it  still doesnt print.
    note there are other printer installed (via TCP/IP ,hp jetdirect printing) and they working finely on
    server 2008r2.
    so give me a stable solution for printing on hp 1022n + printer via RDP server from windows 7

    Hi Mahya,
    Thank you for posting in Windows Server Forum.
    Did you receive any particular error for your issue?
    Please check the link provided by Hari, you can use RD Easy Print driver for server 2008 R2.In addition, if possible try using Universal print driver for your case. 
    Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
    Hope it helps!
    Dharmesh Solanki

  • Crystal Reports 2011 not working in windows 2008 server CITRIX

    Hi All,
    We are using  Crystal reports 2011 in windows 2008 server which is CITRIX farm., having crystal reports 2011 runtime in it..
    We are using .net applicationton to run the reports.
    The crystal reports parameter popup is getting opened. But the calendar icon is not fuctioning ..clicking on the calendar control no pop up appears. no error too..
    OK button is not responding. Cancel button too.
    Can you please help us why we are facing this issue in CITRIX only. When we are using the same version in desktop, Crystal report is working fine.
    Please feel free to ask if required any more details about my problem.

    Ido's idea is excellent, only addition I'd like to make is the following:
    You are trying to run a .NET app. However, CR 2011 does not install any SDKs. So, the directory specified by Ido is not correct. Assuming that by CR 2011 you actually mean "SAP Crystal Reports, Developer Version for Visual Studio .NET", then the directory would be:
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers\prompting
    If that does not help, use Process Monitor and see what the logs tell you (look for Access Denied messages).
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Printer does not work with Windows 7

    I need help for printing with my HP Deskjet IA 3545 eAiO printer.
    I cannot print with my laptop running on Windows 7. I have tried uninstalling and re-installing countless times over the past 3 days using the accompanying CD as well as trying to get the latest driver updates from the internet but all failed to print. I have also tried using Wireless Direct but that did not work as well. The printer printed the  internal page when I ran the HP Printing and Scanning Doctor tool.
    I have no such printing issue with thsi printer model while using my desktop and other laptop running on Windows 8.1. This Windows 7 laptop prints smoothly however when I switch to my Brother DCP-J315W and Canon LBP7100Cn printers.
    Windows Updates lets me know there is one important update for the driver for this printer but for some mysterious reason the Windows 7 laptop just will not accept the down-loading and installation operations for this particular update.
    Please assist me.

    Hi there @YuLen , 
    Welcome to the HP Forums
    I read your post about how your Deskjet Ink Advantage 3545 is not completely functioning on your own computer running Windows 7 however, another computer functions fine with the printer, and the printer will also print out test pages successfully. This seems to sound like an operating system issue so far, and I have some ideas in mind for you to try out that might help.
    1. Run the Microsoft Fix It Tool to uninstall the printer.
    2. Restart your computer.
    3. Perform a Clean Boot.
    4. Restart the PC again.
    5. Run Windows Updates: Use your Start menu to check for updates
    6. Download and run the full installation here: HP Deskjet Ink Advantage 3540 e-All-in-One Printer series Full Feature Software and Drivers
    7. Try printing now!
    If there is still an issue with performing the Windows Updates, contact Microsoft: Microsoft Support Forums
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • System.Windows.Forms.SaveFileDialog not working under Windows 2008 R2 Server

    I am using Windows Server 2008 R2 (64-bit) that is been virtualized with Hyper-V and it is being used as a "Remote Desktop Server".
    I am trying to use this PowerShell code that will open a "Save-File-Dialog" box to select the PDF file and send it to my "batch" file for scanning.  This code works great on my Windows Vista machine and my Windows 7 32-bit machine
    but I cannot get it to work on the "Windows 2008 R2 Server (64-bit)".  It will not come up with any window at all and it will not produce any errors at all, so I can't exactly google for this issue.  I am using PowerShell 2.0 from 2009.
    Any ideas?  I tried it from an Admin account and a regular domain users and neither worked at all, no errors, no window, no nothing.
    *** Update ***
        I took Out-Null out and I received this...
      GAC    Version        Location
    True   v2.0.50727     C:\Windows\assembly\GAC_MSIL\System.Windows.Forms\\System.Windows.Forms.dll
    I then checked the path and the DLL file was in there and it had read and execute permissions for Domain users and Administrators and the window still won't pop up... 
    Here is the entire code in question.....
    # Uses the dot net assembly to give the users a Save-File-Dialog box so they can decide where to put the pdf file
    Function Get-SaveFile($initialDirectory){
    [System.Reflection.Assembly]::LoadWithPartialName("") | Out-Null
    $SaveFileDialog = New-Object System.Windows.Forms.SaveFileDialog
    $SaveFileDialog.initialDirectory = $initialDirectory
    $SaveFileDialog.filter = "PDF files (*.pdf)| *.pdf"
    $SaveFileDialog.ShowDialog() | Out-Null
    # open dialog box to select the .nessuss file.
    $OutputFile = Get-SaveFile
    # User selected where they want to put the scanned.pdf file and it will automatically set it to .pdf for them
    start-process Scan $OutputFile

    I ran the code you have in your function on a Windows 2008 Standard server, and it seems to be hanging on the line
    | Out-Null
    It just sits there and nothing happens, but if I run it on my Windows 7 machines, it runs without any issues. So it seems like the dialog opened, but behind the scenes, and is waiting on the user, but since it doesn't open, the user can't do anything.
    If you find that my post has answered your question, please mark it as the answer. If you find my post to be helpful in anyway, please click vote as helpful.
    Don't Retire Technet

  • Re: Toshiba Store Alu 3.5" 1TB HDD not working with Windows 2008 64-bit

    Just bought this as a backup device for Small Business Server 2008 which runs on Windows 2008 64-bit. However it does not recognise it? Are there any drivers anywhere for this or is it just not supported and I need to buy an alternative?
    Connected it to my Windows 7 64-bit laptop and no problems there.
    Anyone else had same problem?

    Unfortunately, there is no other software for download.
    I checked the Toshiba driver page in Options area but didnt find anything
    As far as I know its a plug & play HDD so you dont need any software in order to recognize the HDD
    Possibly there is a password protection.
    Try this:
    Connect your HDD to the PC where the HDD is working
    select the CD Drive (Password) with your Explorer
    run the ONSPCLCK.exe
    select "Options"
    select "Disable Password Security"
    enter your Current Password
    unplug the HDD
    connect the HDD
    Now it will work but without any password protection. Maybe it would works

  • Print screen not working on windows 8 pro

    Need help!!!
    I have upgraded from vista to windows 8 pro. I am trying to print screen but nothing seems to work (hp pc).
    I have tried the following;
    Windows button +print screen
    Fn+ print screen
    Ctrl+ print screen
    Alt+ print screen
    Ctrl+fn+ print screen
    When I click Windows+ print screen it takes me into the control panel- system page.
    Nothing else happens when I click on the other keys.
    Hope you could help me with this issue.
    Thanks in advance,

    Hi Cat32,
    I understand you are not able to print using shortcut keys.
    I was just wondering if you installed the printer on your new Windows 8 Pro.
    I would like to help but I do need to know the printer that you are using.
    Here is a link to drivers and software help.
    Please let me know if you require further assistance.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Printer does not work on Windows 10

    I cannot install the driver. HP Print and Scan Doctor Does not hlep, neither does the HP Support Assistant and i even downloaded direct 8.1 driver from a third party, which does not work as well. Please Help Me.
    How do i install the printer driver so that windows is able to recognise it. As before i had installed all of it on 8.1 and could even use the 'Netgear Wirless Router Driver' with it.

    Figured it myself.
    For some reason, the tool does NOT support source locations on ReFS formatted drives. Move the D:\ISOFOLDER location to NTFS formatted drive, and the tool works flawless:
    E:\Images>bin\oscdimg.exe -bootdata:2#p0,e,b"D:\ISOFOLDER\boot\"#pEF,e,b"D:\ISOFOLDER\efi\Microsoft\boot\efisys.bin" -o -h -m -u2 -udfver102 -lwinsetup D:\ISOFOLDER D:\TEMP\test.iso
    OSCDIMG 2.56 CD-ROM and DVD-ROM Premastering Utility
    Copyright (C) Microsoft, 1993-2012. All rights reserved.
    Licensed only for producing Microsoft authorized content.
    Scanning source tree (500 files in 15 directories)
    Scanning source tree complete (950 files in 95 directories)
    Computing directory information complete
    Image file is 3591864320 bytes (before optimization)
    Writing 950 files in 95 directories to D:\TEMP\test.iso
    100% complete
    Storage optimization saved 45 files, 16310272 bytes (1% of image)
    After optimization, image file is 3577761792 bytes
    Space saved because of embedding, sparseness or optimization = 16310272
    Well this is the world we live in And these are the hands we're given...

  • Printer Software not Working for Windows 8.1 and Drivers not Working with USB 3.0

    We have a HP CM1312 MFP. We recently got two new windows 8.1 machines. We tried downloading and installing the windows 8 64 bit software, but everytime we tried installing the software the software program would exit abruptly. 
    We then tried just downloading the printer drivers and installing these. They installed ok, but when we tried to connect the printer via USB it said the printer did not support USB 3.0 which are the only ports we have on the new computers. 
    Is there a solution to either of these problems? Without the software we cannot use the fax or scanner. 

    Can you connect USB 2.0 data drives?
    What make/model are the computers?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Finger print reader not working 'post' Windows 10 upgrade from windows 7

    Ok I have succumbed to upgrading to Windows 10 as I did to Windows 8, perhaps this time I won't 'rollback' but already things don't look good .  As a part of the upgrade the Windows 10 the installer spat about the HP Protect Tools Security Manager and asked me to uninstall in order to proceed with the upgrade. I started to get a little concerned from this point on that I would lose my fingerprint reader as a result of going to Win 10 and low and behold that’s happened. It was only after following several threads online that I originally got the fingerprint reader working on windows 7.  I went in and out of the BIOS resetting this and that but in the end despite having all the HP drivers for the readers (latest ones) the only thing that ‘fixed’ my fingerprint reader was the installation of the HP Protect Tools Security Software. So the question is where’s the Windows 10 version of the HP Protect Tools Security Software or the ‘fix’ is there one?? Hate to think an operating system is blocking such a great HP laptop feature!

    I want to upgrade from windows7 to  windows10 (probook 4350s) I have the same question about compatible version, which I hope HP or somebody answer soon and help us...I also cant uninstall my protect tools as upgrade needs me to.I want to know is it possible for finger scanner to work in windows10 after uninstalling HPPTM. thanks,Nazanin Mirzabeigi 

  • Printer 3510 not working witn windows 8.1 goes to print to file not printing

    IN installed the new driver from the hp website which is supposed to fix the print  problems since  the upgrade to windows 8.1. Now when I  tell the computer to print, it looks like it will print, but it goes to print to file and tries to save the document rather than print it. I have no idea what to do.

    Hello kcgphd,
    Welcome to the HP Forums.
    I see that you are having some printing issues when connecting the printer to your Windows 8.1 computer.
    I have a few suggestions that we can try in the attempt to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If you have the printer connected to the computer with a USB cable, please remove it from the printer and the computer and leave it disconnected until further notice.
    The next step that I suggest we go through is Uninstalling the Printer Software.
    Once the uninstall is complete, please restart the computer.
    When the computer is back up and running, please click on the following for the HP Deskjet 3510 e-All-in-One Printer Full Feature Software and Drivers.  Please save the download to the Desktop so that it creates its own icon.  This will make the download easy to find.
    Double click the new icon and follow the instructions.  The installation will let you know when to connect the USB cable.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • IDRAC6 racadm not working on Windows 2008 R2 x64 Server

    We have Dell PowerEdge M910 on a M1000e Blade Chasis
    iDRAC is Accessible via its Web Site and racadm -r works on different Server
    But on the Actual Machine its giving me the Error of:
    ERROR: RACADM is unable to process the requested subcommand because there is no
    local RAC configuration to communicate with.
    Local RACADM subcommand execution requires the following:
    1. A Remote Access Controller (RAC) must be present on the managed server
    2. Appropriate managed node software must be installed and running on the
    Is there anyway to resolve this like Re-installation of Certain Software? or Anything that would make the racadm work when running on the server itself
    Search Google and this Forums and this problem seem to be unique.
    Lifecycle Controller Firmware is
    Firmware Version is 3.60 (Build 3)
    Operating System is Microsoft Windows Server 2008 R2, Enterprise x64 Edition
    Any help would be greatly appreciated

    Many Thanks for your Reply 
    Since iDRAC is accessible via it IP Address I have done the following but NOT successfull.
    racadm -r <IPAddress> -i racreset soft/hard (with and without -f flag)
    Also Reset using the Blade Chasis iDRAC and Server's iDRAC
    I dont think there is something wrong with the iDRAC, as this is accessible using the iDRAC Web GUI and command line interface with the "-r" flag.
    The issue is running the racadm (without and -r) on the server itself and getting the error mentioned above
    Is there a way to check the any Logs file and or is there any Windows Server Service's Component that is needed by racadm command in order for it to function when running locally?
    OMSA is at
    Lifecycle Controller Firmware is
    Firmware Version is 3.60 (Build 3)
    Thanks and Best Regard

  • Printer will not work on window 7

    I have a Lexmark 4200 series printer and downloaded the cd on windows 7. It will not print. I try installing the program and then I was going to try and reinstalling but when I do it says you can't install until the printer is through printing?? 

    Open Devices and Printers in Control Panel. Right-click the printer in questions and click Remove Device.
       Install a printer
    Is this the driver download?
    If you wish to discuss this further, tell us which computer you have. 

  • IIS Server / Ftp Isolation user not working in Windows 2008 R2

    Please help as last time when we are still using the Server 2003 we don't have issue with the IIS virtual directory, what I mean is when the user log in there username and password they can only see directly their folder but when we already shift to server
    2008 everytime we log in we can able to see other users folder , of course even I try to open other users folder they cant able to access only what belongs to me.  I hope we can still do like last time, we can only see our own folder in file explorer.
    Please help..

    As the permissions on IIS virtual directory are not similar with the permissions on windows file systems, I suggest you ask for help from IIS7 forum for better and accurate answer to the question.
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for