Redistribute draw input to multiple selected bitmaps in a layer/layers?

Hi all
I am very new here but have one really important question for me...
First off: I am painter/scatcher/ilustrator (or how to name it..sorry guys, my english is really bad) and came to a point where I need to have two bitmaps one above other with almost the same content EXCEPT the one on top is just stroke with no fill and the bottom one is stroke with fill - this way I am able to have my strokes still clearly intact independently from possible fill mismatch that may occur during such drawing (for example: if you ever tried to fill any drawing you have to play with its atributes and there are several times when you need to hange the color as the project grows...but then after many re-fillings you notice that the stroke line becomes more and more thinner, blury etc. (I know about "Preserve transparency" radiobutton but it is no help if one sets Tolerance value too high and let's say he was not aware of...), simply put> you need to redraw those lines again and so on and on...pretty unnoying as hell; ...or ju just simply want to have the stroke intact by filling which may pretty often happen depending on tolerance value one set when filling color may cut a bit from actual stroke etc.).
I know I can easily do this by duplicating my first drawing (scatch/stroke only) and let the first one be filled with colours etc and the second left alone as it is (just the stroke intself) BUT all the time I face the fact that as being in process of creation such drawing I almost all the time need to RESTROKE/RE-SCATCH some parts of the image, so the way mentioned before do not work here cos it would be almost imposible to draw two identical changes on those two separate bitmaps in a layer/s.
So my final question/suggestion: do FW CS5 support any kind of "redistributed input" to all selected bitmaps/layers?
That way I would be able to redraw both bitmaps at the same time at once so the chages would be 1:1 in both!!! Let's say It could be in a form of another small icon in layers pane at the end of every bitmap line so one could interactively decide which one - and when - he wants to send input to, so one could make it on/off independently anytime (I want to make changes in both bitmaps at the same time but let all the others intact? OK, no problem: one would set "on" only those 2 bitmaps, make his changes, and then set them "off" again to edit them separately as before).
Please, help...!
regards
Eriq

Hi Rick,
I am working on the same topic. I am strongly interessted in solutions to your open questions, that you pulled forward in the past.
Did you make any progress?
Thanks in advance and regards
Marcus

Similar Messages

Ranges input using multiple selection in select-options

Hello,
I have declared a single selection field with multiple selection as follows:
SELECT-OPTIONS:
S_PONUM FOR EKKO-EBELN NO INTERVALS,
If a range is entered using multiple selection, no value appears in the selection field on screen, however, the ranges tab in multiple selection shows the range. Is there a way to programatically test if a range has been entered using multiple selection? Help is appreciated.
Regards

Hi,
If you not displaying the intervals then user can enter only one value then option field will be with 'EQ' sign.
LOOP AT S_PONUM.
IF S_PONUM-OPTION NE 'EQ'
" Then Values are entered using the multple selections
ENDIF.
ENDLOOP.

Multiple select options for an input field

Hi All,
We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
Please do let me know how to solve this.
Thanks & Regards,
Lavanya .

Hi,
The requirement is : Suppose there is a input field PLANT.
If we give input for plant it gives related output.
Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
(Like we implement in ABAP)
Please do let me know how can this be implemented in BSP.
Thanks & Regards,
Lavanya.

I want to draw multiple selection for some field on Type M program.

Hi. everyone.
I'm programing on Type M program but I don't know how do I draw multiple selection on Type M.
Is it possible?
If you know some related website or on-line document, please let me know that.

It means Online program. it is not report progeam.
I want to design a multiple selection on screen.

Input Field with multiple selection

I am planning to add an input field to my BSP application.
I have already implemented a self-made F4 help for it.
But now my customer wants a multiple-selection for it (as in the workbench, when you display the content of a database table).
Is there anything I get for free, or do I have to implement this all on my own?

Hi Daniel,
Are you looking for implementation of select-options within BSP? For this you have a beautiful article by Thomas Jung... You look for it....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cd465292-0801-0010-e19f-e67172032668
Thanks...
Regards,
Ravikiran

RE: Getting multiple values from more than one multiple select popup window

I have a button on a JSP of mine that when clicked creates a popup window (right now it is called popup.html) with a multiple select menu.
My question is how do I get all the values selected from the menu into my JSP (sample.jsp) so that I can set each of the values for my bean.
The other problem is that I have more than one select multiple menu.
Please help if you can. Any advice or suggestions here would be greatly appreciated!
Thank you!

I realize that I can use request.getParameterValues to get the values selected from my html because I am passing them to the hidden inputs I have and then using the request.getParameterValues to get each of the values.
MY PROBLEM IS WHAT IF I HAVE 4 MULTIPLE SELECTS??? How can I use the same html popup menu to get the values from the 4 different multiple selects????
I look forward to your response.
This code is from my JSP:
<INPUT TYPE="TEXT" NAME="Field1" SIZE="15">
<INPUT TYPE="hidden" name="F1Rad1">
<INPUT TYPE="hidden" name="Permission">
<input type=button name=choice onClick="window.open('optionPicker.html','popuppage','width=250,height=100');" value="Options"></TD>
Here is my optionPicker.html code for the pop up menu:
<html>
<head>
<script language="JavaScript">
function sendValue(s)
var boxSize= s.options[0].value;
var restrict = s.options[1].value;
window.opener.document.addNewForm.F1Rad1.value = boxSize;
window.opener.document.addNewForm.Permission.value = restrict;
window.close();
</script>
</head>
<body>
<center>
<form name=selectform>
<select multiple name=selectmenu size="2">
<option value="large">Large Text Input Area
<option value="restrict">Restricted Access
</select>
<p></p>
<input type=button value="Select Option(s) For Field" onClick="sendValue(this.form.selectmenu);">
</form>
</center>
</body>
</html>

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

Use a multiple selection parameter in the data model

Hi
i have created a parameter with the property multiple selection.
This parameter i use in the Data Model where area,
if i just mark one value the report works well if i mark more the one
the report run into a error.
WHERE PSNR IN :ma
the xdo looks like
<?xml version = '1.0' encoding = 'utf-8'?>
<report version="1.1" xmlns="http://xmlns.oracle.com/oxp/xmlp" defaultDataSourceRef="tisoware">
<title>BDE Nettozeit</title>
<properties>
<property name="showControls" value="true"/>
<property name="online" value="true"/>
<property name="parameterColumns" value="2"/>
<property name="openLinkInNewWindow" value="true"/>
</properties>
<dataModel defaultDataSet="BDERUECK">
<dataSet id="BDERUECK">
<sql dataSourceRef="tisoware">
<![CDATA[SELECT (SUBSTR(DATUM,1,6)) AS DATUM, SUM(NTTOZEIT) AS ZEIT,
TRUNC(SUM(NTTOZEIT)/60) AS STUNDE
FROM BDERUECK
WHERE (DATUM >= :datev) AND (DATUM <= :dateb) AND (KZDELETE = 'N') AND FIRMA = '1' AND ((PSNR IN :ma))
GROUP BY (SUBSTR(DATUM,1,6))]]>
</sql>
<input id="datev" value="${datev}" dataType="xsd:string"/>
<input id="dateb" value="${dateb}" dataType="xsd:string"/>
<input id="ma" value="${ma}" dataType="xsd:string"/>
</dataSet>
</dataModel>
<valueSets>
<valueSet id="date">
<sql dataSourceRef="tisoware">
<![CDATA[SELECT DISTINCT DATUM
FROM BDERUECK]]>
</sql>
</valueSet>
<valueSet id="employee">
<sql dataSourceRef="tisoware">
<![CDATA[select      PERSTAMM.PSPERSNR as PSPERSNR,
      PERSTAMM.PSNR as PSNR
from      TISOWARE.PERSTAMM PERSTAMM
where    PERSTAMM.FIRMA = '1'
order by PERSTAMM.PSPERSNR]]>
</sql>
</valueSet>
</valueSets>
<parameters>
<parameter id="datev" defaultValue="20050103">
<select label="Datum von : " valueSet="date" multiple="false" all="false" refreshParameters="false"/>
</parameter>
<parameter id="dateb" defaultValue="20060930">
<select label="Datum bis : " valueSet="date" multiple="false" all="false"/>
</parameter>
<parameter id="ma" defaultValue="152">
<select label="Mitarbeiter : " valueSet="employee" multiple="true" all="false"/>
</parameter>
</parameters>
<templates default="BDE Nettozeit">
<template label="BDE Nettozeit" type="rtf" url="BDE Nettozeit.rtf"/>
</templates>
</report>

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

Multiple Select boxes in one form

Does anyone know if it is possible to have multiple select
boxes inside one form? I have six different select boxes that are
generated by six separate queries. The action page for all six
select boxes is the same so I just want one submit button so users
don't get confuse. I don't want to cluster up the page with submit
buttons but I may resort to that option.
My problem is the select boxes generate a number and when
that number is submitted I want to pass two other variables with it
to the action page. I tried putting a "Form" tag around the 6
select boxes. Inside each select box I tried to add an "Input
type="hidden"" and give thte name and values that I needed. That
worked for the first select box but when I tried the second select
box it used the hidden values for the first select box.
If anyone can help, I would greatly appreciate it. Or if you
have any other suggestions I am open to any.
Thanks

Paross1,
I wasn't thinking about that and you gave me a great idea.
Here is how I changed my select boxes.
<cfform
action="Resolution_History.cfm?year=#year#&sessiontype=#sessiontype#&btype=res"
name="form">
<select name="SRINPUT">
<option value="">SR
<CFOUTPUT Query="findSR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HRINPUT">
<option value="">HR
<CFOUTPUT Query="findHR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SCRINPUT">
<option value="">SCR
<CFOUTPUT Query="findSCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<br>
<select name="HCRINPUT">
<option value="">HCR
<CFOUTPUT Query="findHCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SJRINPUT">
<option value="">SJR
<CFOUTPUT Query="findSJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HJRINPUT">
<option value="">HJR
<CFOUTPUT Query="findHJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<INPUT TYPE="Submit" VALUE="Submit" alt="submit
button">
</cfform>
On the action page I need the below IF statement to work so
it will set the variables. It isn't working at this time. Its not
bringing the values of billnumber, houseorig or the billtype.
Do you have any thoughts? I know it is close. I need to set
all of the inputs to input4 to generate my queries.
<cfif form.srinput gt 0>
<cfset houseorig eq "s">
<cfset billtype eq "r">
<cfset srinput eq input4>
<cfelseif form.hrinput gt 0>
<cfset houseorig eq "h">
<cfset billtype eq "r">
<cfset hrinput eq input4>
<cfelseif form.scrinput gt 0>
<cfset houseorig eq "sc">
<cfset billtype eq "r">
<cfset scrinput eq input4>
<cfelseif form.hcrinput gt 0>
<cfset houseorig eq "hc">
<cfset billtype eq "r">
<cfset hcrinput eq input4>
<cfelseif form.sjrinput gt 0>
<cfset houseorig eq "sj">
<cfset billtype eq "r">
<cfset sjrinput eq input4>
<cfelse>
<cfset houseorig eq "hj">
<cfset billtype eq "r">
<cfset hjrinput eq input4>
</cfif>

List/Menu (multiple selected) insert into MySQL

I have been building a feedback form and I am running into a
issue that when I place a list/menu that allows multiple selections
when I submit my form in my MySQL database it collected the
information but only on the last multiple selection.
For example, this is what my list/menu looks like.
<select name="occasion" size="5" multiple="MULTIPLE"
id="occasion">
<option value="Spur of the moment,">Spur of the
moment</option>
<option value="Family dinner">Family
dinner</option>
<option value="Special occasion (i.e.
birthday)">Special occasion (i.e. birthday)</option>
<option value="Office get together">Office get
together</option>
<option value="Romantic dinner">Romantic
dinner</option>
<option value="Night out with friends">Night out with
friends</option>
<option value="Business meeting">Business
meeting</option>
<option value="Other">Other</option>
</select>
And my MySQL database I have it set up as...
Field Type
occasion mediumtext
I do not know why I cannot have more than one selection
inputed into my field, what must I do to correct this? Everything
works perfectly expect the multi selected list/menu. I want to
place all that is selected in the list/menu in that one database
field called occasion.

.oO(MikeL7)
>>You should also test with isset() and is_array() if
$_POST['occasion']
>>is available at all and of the expected type. The
code above will also
>>throw a notice if $insert_string is not initialized
before the loop.
>
> I use both isset and is_array in my code, When you say
notice, you dont mean
>a script stoppiong error?
Nope. An E_NOTICE error won't terminate the script, but
shouldn't happen
nevertheless. While developing, the error_reporting directive
should be
set to E_ALL|E_STRICT and _all_ reported problems should be
solved. It's
not only better coding style, but also helps to prevent real
errors. In
this particular case it was just a guess, because it was only
a part of
the code. But using an uninitialized variable with a '.='
operator for
example would lead to a notice, which should be fixed.
>>But of course this is a really bad DB design, as it
already violates the
>> first normal form (1NF). Just some ideas for queries
that might come to
>> mind, but would be really hard to do with such a
comma-separated list:
>
> A better table design would be to have column for |
list_ID | user_ID |
>song_ID | and do a insert for each song selected.
Yes, something like that.
>Thanks for the input, i like escaping the variables from
a string as they
>stand out more in code view, is the single quote method
faster? And which one
>will be or is already deprecated?
All are correct and won't be deprecated. IMHO it's more or
less just
personal preference. It also depends on the used editor and
its syntax
highlighting capabilities. For example I use Eclipse/PDT for
all my PHP
scripts, which can also highlight variables inside a string.
But if the
above is your preferred way, there's nothing really wrong
with it.
Just some additional thoughts:
Personally I prefer as less escaping and concatenating as
possible,
because such a mixture of single quotes, double quotes, dots
and
sometimes even escaped quote signs (for example when printing
HTML)
_really_ confuses me. I like to keep my code clean and
readable.
Something like this:
print "<img src=\"".$someVar."\" ...>\n";
not only hurts my eye, it is also quite error-prone. It's
easy to miss a
quote or a backslash and get a parse error back, especially
in editors
with limited syntax highlighting (or none at all). So I would
prefer
print "<img src='$someVar' ...>\n";
or even
printf("<img src='%s' ...>\n", $someVar);
When it comes to performance issues, of course there's a
difference
between the various methods. But for me they don't really
matter. In
practice you usually won't notice any difference between an
echo, a
print or a printf() call for example, as long as you don't
call them
a million times in a loop.
So I always just use the method that leads to the most
readable code.
In many cases, especially when a lot of variables or
expressions are
involved, (s)printf() wins. Not for performance, but for
readability.
But as said - personal preference. YMMV.
Micha

File Dialog (Details View and Multiple Selections for View File Type)

I would like to use the generic windows dialog box found in the toolbar under:
File I/O/Advanced File Functions/File Dialog
What I would like to do is have multiple selections for the file type, for example one menu selection is *.txt, another is *.rtf, another is *.csv, etc. Listing a single type is straightforward.
Also does anyone know if there is a way to have the dialog open in the DETAILS view automatically?
Thanks for any help!
Carlton

Hi,
You can do it in following ways:
1. Write in pattern input the string "*.txt; *.csv; *.rtf". This will show to the user only files with this extensions in the dialog.
2. Another way is to create ring or menu where user could specify the extension. Depending on this extension you could wire the appropriate string to the pattern input of "File Dialog.vi"
I have made an example.
Good luck.
Oleg Chutko.
Attachments:
fileopen.vi ‏42 KB

Affect multiple selected files in Filmstrip

I get so aggravated when I'm in the Develop module and want to copy (ctrl-shift-C) and paste (ctrl-shift-V) develop settings from one image to multiple other images and realize (yet again) that the Paste is only applied to the "most" selected image. Who's idea was "most selected" image?? Why should I have to change to the Library module (Grid view) in order to paste DEVELOP settings to multiple files.
PLEASE change this so that I can copy and then paste the settings (e.g., white balance) to a multiple selection of files in the Filmstrip without having to go to a different module.
Thanks,
Shane

Hi,
Doc.Caliban wrote:
I have a simple service that opens a file in an app that renames the file. (the app was created with A Better Finder Rename) It works when a single file is selected, but if I select multiple files it only renames the last file that was selected and ignores the rest.
How can I get it to open all of the selected files in one go?
Remove the "Open Finder Items" action
Add the "Run AppleScript" action
Clear all the text in this action, and put this script in the action :
on run {input}
    try
        tell application "Movie Files" to open input
    end try
end run

Struts multiple selection

hi all
i have a stwo select list in my jsp page. with the help of a javascript it's possible to move items from one select list to the other and vice versa. Now i would like to allow multiple selection, in order to move more than one element from one list to the other.
I tried it with <html:select multiple="true" > but this doesn't work.
<table>
     <tr>
     <td>
          <html:select style="width: 130px;" multiple="true" size="5" name="invUserForm" property="groupsEntry" onchange="enableDisable(this.form.groupsEntry, this.form.Add);">
     <html:options collection="groupsEntries" property="id" labelProperty="name"/>
     </html:select>
     </td>
     <td>
     <input type="button" name="Add" value="    Add -> " style="width: 100px;" disabled onClick="MoveOption(this.form.groupsEntry, this.form.addGroupsEntry, this.form.Remove, this.form.Add);javascript:this.form.Remove.disabled=true;this.form.Add.disabled=true"><br>
     <br>
     <input type="button" name="Remove" value=" <- Remove    " style="width: 100px;" disabled onClick="MoveOption(this.form.addGroupsEntry, this.form.groupsEntry, this.form.Add, this.form.Remove);javascript:this.form.Add.disabled=true;this.form.Remove.disabled=true"><br>
     </td>
     <td>
          <html:select size="5" style="width: 130px;" multiple="true" name="invUserForm" property="addGroupsEntry" onchange="enableDisable(this.form.addGroupsEntry, this.form.Remove);">
               <html:options collection="addGroupsEntries" property="id" labelProperty="name"/>
          </html:select>
</td>
     </tr>
     </table>
Any help appreaciated.
Thanks, Angela

what doesn't work... picking multiple options (you need to shift- or control-click), or the moving? The moving appears to be handled by Javascript, so you need to look at the MoveOption function, cuz maybe it only supports one value.

RAR5.3 not able to cut and paste list of users to Multiple Selection screen

CC V4.0 on ABAP system has a feature where you can cut and paste a list of many users from the clipboard to Single Values column in the Multiple Selection screen, so you can run SOD Analysis Report for all those users. The Multiply Selection screen is a standard SAP supplied pop up screen.
With RAR 5.3 the Multiply Selection screen design is different. There is no longer feature to cut and paste from clipboard. We have to input each user one at a time. So if you have many users (20, 30, etc.) it is a time consuming task. It is not acceptable to our business power users.
We can import the list of users to a Custom User Group (in the Configuration Tab). First of all, there is no mass delete on Custom User Group. You have to delete each user one at a time which is time consuming. The alternative is to create a new Custom User Group each time, then it becomes a maintenance nightmare. Secondly, it is in the Configuration Tab which is only available to Administrators (fear of users changing configuation data), so the Administrator (or whomever has access to the Configuration Tab) has to maintain the Custom User Groups which is a lot of work for him or her or them.
We talk to SAP every week. But they are looking at this as a long time project. Does any one of you (or your company) has the same requirements? How do you get around it? Did you setup some other procedures so users can cut and paste the users list and run the Risk Analysis report themselves?
Thanks,
John.

This is probably a JVM issue. Are you using JInitiator or the IE native JVM?
I suggest you turn on the JVM console, set the trace level to maximum, and then watch what happens when you attempt the copy.
Also, check the key mapping (usually ctrl-k) that the forms applet is implementing. Perhaps ctrl-c means something else...

Add multiple selection screen

Hi!
I've set up an initial screen (selection screen) in my dynpro-program, with company code (BUKRS) as input field. This screen has been developed using the Screen Painter and is of the screen type 'Normal'.
I have managed to add a search help to the input field, but how can I <b>add a multiple selection screen</b> to it?
Thank you for all your help!
- Mari Virik

HI,
Create button beside BUKRS field.
and use FM <b>K_CMPERS_MULTIPLE_SELECTION</b> when the button is pressed.
this FM provides u a multiple selection screen. Use 'R' for Fieldtype.
data: parm like cmpersdata occurs 0.
call screen 300.
*&      Module USER_COMMAND_0300 INPUT
      text
module USER_COMMAND_0300 input.
case sy-ucomm.
when 'MULT'.
CALL FUNCTION 'K_CMPERS_MULTIPLE_SELECTION'
EXPORTING
    p_fieldtype         = 'R'
    p_fieldname         = 'MATNR'
    p_tablename         = 'MARA'
tables
    pt_parm             = parm
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.
endmodule.                 " USER_COMMAND_0300 INPUT
Regards
CNU

Redistribute draw input to multiple selected bitmaps in a layer/layers?

Similar Messages

Maybe you are looking for