Redoing the Intial load of Material Master data

Hi,
The requirement is to flow the data between R3 and CRM.Business partners, Material and Sales documents.
I have created Customer and Material in R3 and in CRM r3ac1 i set filter conditions for material and customer .
Data successfully flowed from R3 to CRM this is confirmed in CRM (SMQ2) when i activated it showed a green light.
I used tcode COMMPR01 in SD tab it is not showing particular sales org 5030.
For BP it shows sysfail in SMQ2 when i tried to check it shows message BP number already exists.
           Iam doing the Intiaload of Material Master data second time .so what precautions i have to take before starting the Intial Load .
Plz Clarify.
Thanx's in Advance.
Regards,
Jack.

HI Jack,
Regarding the customers:
You could be getting the message due to a variety of resons. Perhaps you are using overlapping BP number ranges in CRM and R/3?
The other reason could be due to client copies in one or both systems thus leading to data flowing to the wrong clients.
Regarding Materials:
Make sure that that org mapping has been correctly  maintained in the CRM Org Model and that this org unit has not been filtered out in the fitler settings.
If the mapping exists correctly, then you will see a BDOC with an error. You will also see the sent data in the BDOC.
This is easy to check. Just change a Sales Area dependent attribute for a material in R/3 and see if the change is sent to CRM. If yes, then check the BDOC and the BDOC log. If the problem is in the org Mapping this will show up in the BDOC Log.
Another thing you can check is the buffer. Perhaps the cache/buffer is not getting updated after the download.
Regards,
Shiv

Similar Messages

  • Change the characteristic Values in Material master date

    Hi Experts,
    How do change the characterstic values in material master ? Is there any standard BAPI or t.ocde or LSMW
    Best Rgds
    Suma

    I often changed classification with LSMW using IDOC CLFMAS

  • Change the characteristic Values in Material master dat

    Hi Experts,
    How do change the characterstic values in material master ? Is there any standard BAPI or t.ocde or LSMW
    Best Rgds
    Suma

    Hi Suma,
    Probably this question should be asked in another forum (MM) then the one for DMS related questions

  • Material Master Data load failed

    Hi All,
    I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
    But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
    Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
    Best Regards,
    Nene.

    hi Nene/Sankar,
    for material text no language please check Note 546346 - Material texts: no selection on languages
    and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
    hope this helps.
    Note 546346 - Material texts: no selection on languages
    Summary
    Symptom
    When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
    Other terms
    DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
    Reason and Prerequisites
    As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
    Solution
    As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
    Import
    Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
    Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
    Support Package 3 for PI 2002_1_470
    In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
    Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
    Note 561880 - Requests hang because IDocs are not processed
    Symptom
    Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
    After a timeout, the request status finally switches to 'Red'.
    Information IDocs with the status '64' are displayed in the 'Detail' tab.
    Other terms
    IDoc, tRFC, ALE, status 64
    Reason and Prerequisites
    Status information on load requests is transferred in the form of IDocs.
    IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
    IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
    If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
    The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
    Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
    You must therefore analyze the status text.
    Solution
    We recommend asynchronous processing for Business Warehouse.
    To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
    The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
    Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
    The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
    1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
       TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
    2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
    3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
    However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
       TIP: Also check transaction SM58 for problematic tRFC entries.
    IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems.

  • Revoke the material master data's updated in production

    Hi Experts,
    I have updated the product hierarchy field for the list of materials using BAPI_MATERIAL_SAVEDATA.
    I have forget to set the SALES_VIEW flag in BAPIMATHEAD table, instead it created all the views for the material. Is there any way to revoke the material master data.
    Thanks & Regards,
    Anand

    ALL_CAPITAL should resolve your problem. Check this also:
    RSDMD 194: 0MATERIAL Datarecord is invalid
    /thread/307925 [original link is broken]
    Absolutley Stuck...can't load data as characteristic
    Thanks..
    Shambhu

  • Inital material master data load error

    Hi experts,
    We are on ecc 6.0 and gts 7.1.
    While loading the initial material master data from R/3 to GTS,Transaction (/SAPSLL/MATMAS_DIRR3),I am getting the error ( for 1 material)- 
    Of 1 selected material(s), 0 were processed successfully
    Message no. /SAPSLL/PLUGINR3112
    When I try to load the required list of material, the error is same.
    The RFC data distribution model is working for vendors and customers properly.
    We want to use only compliance mngt and embargo functionality to block orders.
    Can you give me some guidence?

    Dear Milmuk,
    it is hard to tell, why it is not working. There could be different reasons.
    Please check if you have entered the correct data.
    It could be that the relevant tables for transfer are not filled.
    Please execute the following:
    - BD53                                                                
    - select message type (/SAPSLL/MATMAS_SLL)and edit it                 
    - select a segment                                                    
    - save                                                                
    - deselect segment again                                              
    - activate                                                            
    - set in trx BD60 the FM to the correct value                         
      (/SAPSLL/MATMAS_DISTRIBUTE_R3)                                                                               
    You can than check with the programm: '/SAPSLL/PLUGIN_CHECK_R3' if    
    all 4 required tables (TBD24, TBD62, TBDA2, TBDME) are filled, or not.
    If that's all fine I suggest you open a CSS ticket as then a more detailed analysis is necessary.
    Christin

  • How to maintain the material master data in plant

    Hi all,
    while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

  • Function module to retrieve the material master data

    Hi all,
    creating material master dta i am using BAPI_MATERIAL_SAVEDATA .is there any f.m with same structures as BAPI_MATERIAL_SAVEDATA to retrieve the materi master data.

    Hi,
    Not sure if there is any function module to get material master data with the same structure..
    But..
    You can select the data from MARA, MARC, etc...and convert it to the BAPI structures using the following function modules..
    CFX_MAP2E_MARA_TO_BAPI_MARA
    CFX_MAP2E_MARC_TO_BAPI_MARC
    Thanks,
    Naren

  • Error in uploading the material master data

    HI friends,
    I have trasferred the material master data through idocs from one server to another server(with in SAP only).
    Outbound side the status of idoc is 3 which is OK.But inbound side ,the status is 51 and the error is 'Function module not allowed  IDOC_INPUT_MATMAS01'.I debugged the function module in which the control records , data records are getting transferred correctly and also the segments data is also fine.But , i am not able to rectify  the error.
    Can anybody give the solut

    Hi mahesh,
    check the proces code may be having the FM module 'IDOC_INPUT_MATMAS01'. change with some other FM for processing the IDOC. you need check with different ways what is the problem. better dont stick on one thought.
    ~linganna

  • SAP standards for retriving the Material Master Data

    Can someone provide me list of all SAP standards for retriving the Material Master Data with respect to views.
    Standard Reports
    Function Modules
    RFC's
    BAPI's.
    T.codes
    Sample code's
    useful answers will surely be awarded.
    Regards
    Vinayak

    Hi,
    These are the standard BAPI's for Material master.
    BAPI_MATERIAL_DELETE Flag Material for Deletion
    BAPI_MATERIAL_DISPLAY Display Material
    BAPI_MATERIAL_EDIT Change Material
    BAPI_RETAILMATERIAL_CREATE Create Material
    BAPI_RETAILMATERIAL_DELETE Discontinue Material
    BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
    BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
    BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
    BAPI_MATERIAL_EXISTENCECHECK Check Existence of Material
    BAPI_MATERIAL_GETBATCHCERT Create Quality Certificate for Batch in Portable Document Format (PDF)
    BAPI_MATERIAL_GETBATCHES Create Batch List for a Material
    BAPI_MATERIAL_GETCHARMERCHHIER Supply Characteristics of Retail Material for Material Group Hierarchy
    BAPI_MATERIAL_GETINTNUMBER Assign New Internal Numbers for a Material Type
    BAPI_MATERIAL_GETINTNUMBERRET Assign New Internal Numbers for a Material Type for Retail Materials
    BAPI_MATERIAL_GETLIST Supply List of Materials for Search Criteria Transferred
    Thanks.,

  • Material master data load

    Hi all,
             I am new to loading master data, i have searched forum still getting more confusion, My requirment like material master
    data load i like to know what data source have to use and how to load into target, please guide me step by step.
    thank u

    hello there,
    lets first define what you want, e.g. attribute, text or hierarchy, it can be all 3 as well.
    if you want attribute for material master data you can use 0MATERIAL_ATTR
    for text you can use 0MATERIAL_TEXT and for hierarchy you can use 0MATERIAL_HIER
    all material master data goes into infoobject 0MATERIAL. good luck and feedback if you need further assistance.

  • Uploading picture to the material master data

    Hi friends,
    I searched the forum about this subject, however there are mostly answers related to retail sector.
    I'd like to learn if ECC 6.0 could only itself is able to this. I mean is ECC 6.0 enough to add pictures to material master data or is there any configuration or customization requirement for that?
    Thanks in advance.
    Best regards,
    Yusuf Gezer

    yes, it is possible to store images to the materials. here you have at least 2 options, DMS and GOS.
    DMS is document manament system, here it is even possible to classify the images for a better search. GOS is generic object services which is available in the maintenace transactions for material master and several other objects. Pretty easy to use, but....you cannot search for the images, you always have to go into the material and fom there you have to open the GOS to see whether an image exists or not.
    further you should think about the place where you store these images and other attachments, I mean in SAP table system or in an optical disc system linked to SAP, which is much cheaper diskspace than the SAP tablespace.
    A migration from DMS to DMS is relatively easy and can be accomplished with IDOCs via LSWM or ALE scenario.
    Migration of GOS attachements is challenging. Nothing ready for use exists in SAP to do it.

  • Message Type for Material Master Data Changes

    Hi all
    I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
    Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
    I would like to replace this message type with another one (RS0020) in order to align different systems.
    Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
    So I would like to know:
    1. How is the message type related to the DataSource 0material?
    2. is it possible to replace a message type for BW?
    3. if yes, how can I do it?
    Thanks in advance.
    Elisa
    mail: [email protected]

    Hi Oscar!
    At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
    But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
    E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
    I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
    As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
    That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
    But message types referred to MARA field changes are different between the two systems.
    And it seems they are automatically created.
    Is it true?
    Thanks
    Elisa

  • Material master data

    Experts!
    M working in MM Extraction,
    i 've to extarct Inventory data,before that , i need to extract material master data ,
    like 0material_attr,text
    so can anyone give me the step by step procedure  to load master data pls..
    Thanks
    Srujan

    Hi Sruan,
    1.Go to RSA6 on Source system(ECC) and check weather your datasource is active or not.
    2.If it is active and if your Business content is active you can Install your Infosource,transfer rules,update rules etc. and you can schedule an Infopackage and pull data from source to target.This is one method of loading master data.
    The other method is
    1.Activate your datasource on ECC side.
    2.Replicate your data source.
    3.Assign Infosource.
    4.goto context menu of your datasource(0MATERIAL_ATTR) and create transfer rules.
    5.Propose update rules
    6.Activate them.
    7.Schedule an Infopackage and load data into target.(0MATERIAL)
    Follow same procedure for texts
    refer the link
    http://help.sap.com/saphelp_nw04/helpdata/en/70/270081729f5244af1d713d7ec47193/frameset.htm
    Hope this helps,
    Regards
    Karthik

  • Material master data maintenance strategy

    Hi,
    We are working on a global template to suggest Material master data maintenance strategy.
    Please suggest what could be various options for same.
    Regards,
    Avnish

    Hello,
    In the same situation now:
    1.  Suggestion is to load the Basic Data centrally, say from HQ
    2.  Other data can be loaded via the subsidiary in the different countries.
    3.  If required you can use a block or a material statu and have the HQ control the access to the other parts of the material master.
    For your information, we have come across a big issue regarding this and only now we have begun the above method as my client's HQ controls the release of materials into the market.
    Regards
    Waza

Maybe you are looking for

  • SmartView Task List not opening FR report

    I am trying to open FR report from a Task List task in SmartView (using Planning provider). If I am already logged into my Planning application in browser, the report opens. But if I am not logged (e.g., browser is closed), an empty page opens in bro

  • How to login the remote desktop with user id and password using coded ui

    we are using vs 2013, we have automated some automated test cases using coded ui. i have on problem while i am running the those test cases in remote system. here the scenario is "after executed one test case we need to restart the system. After rest

  • White screen of death, unable to restore

    OK, as the topic states I have the dreaded white screen of death on my G5 iPod video. I had a Powerbook problem that required me to reload all of my software and when I did, I inadvertantly updated iTunes and therefore also updated my iPod. I have al

  • Using ditaval files with XML Author

    I've been evaluating XML Author and am trying to determine how to use ditaval files with it. If I want to save a ditamap as a book for PDF creation, the Prompt for DitaVal File check box is greyed out. Does anyone know why this might be the case? Is

  • How to call a java function that is in page header from a process in page.

    Hi, Generally we call plsql process from a javascript in the header of that page. But i want the other way around. Is it possible or is it a completely wrong idea. I am thinking so because we are able to call javascripts from items and buttons why ca