Redundant and load balance of Final Cut Server

Greeting All,
Anyone has good start of redundant and load balance solution for Final Cut Server? Please advise!!
Thanks,
Spin

Found this and seems to have worked...
http://support.apple.com/kb/HT3836
Just ran those two commands and then restarted the web service and now I get the page.

Similar Messages

  • Resources for designing redundancy and load balancing among data centers

    Hello all,
    I'm looking for resources for designing redundancy and load balancing between two physically separate data centers. I'm looking for some "best practice" links, tips, or recommendations. Any suggestions are appreciated!
    Thanks.

    I think that we can do per packet load balancing by using CEF.
    Please go to the following URL:
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fswtch_c/swprt1/xcfcefc.htm#xtocid5
    Also, you may need local director or distributed director. What resource/application is availalbe in the data centre? (e.g. http server, ftp server, TN3270 server, and so on)

  • Long HDV and XDCAM clips through Final Cut Server

    Hi,
    I know that I could post this in Compressor and/or Quicktime and/or Leopard/Tiger Forums, but as this problem it`s causing my Final Cut Server to not working well, I think it makes sense to post here.
    To resume: HDV and XDCAM clips (all on original codec, only xdcam transferred to mov in xdcam transfer) with file size bigger than exactly 4GB always FAILS in "Final Cut Server"/"Compressor alone in ANY machine installed from scratch"/"Anything that uses Quicktime". Source and Destination being localy or networked. DV or DV50 can get bigger than that, I`ve never seen this error with DV`s codecs.
    I had seen this problem before I bought final cut server. When I was transcoding our interviews for transcription. We always worked with BETA SP and captured in DV or DV50. We were starting to go to HDV and now to XDCAM and this error has started to appear.
    I have a "proxy" made a year ago from a HDV and it`s original has 8GB. I tried this file again and as I expected didn`t work. In ANY computer with any installations with only the latest updates. I`ve remembered that I was using Tiger at this time, and Quicktime/Tiger/ProApps had a old version.
    My two cents are that some update from Tiger/Leopard/QuickTime/ProApps made this happen.
    So ANY HDV/XDCAM file bigger than 4GB it`s FAILING in ANY system. (Tiger or Leopard, With or without FCP and QT PRO, Installed from scratch and updated every thing).
    Some tests I`ve made:
    -Compressor works with this two codecs to lower res in TIGER and with QuickTime Version 7.4.0 and LOWER. (had to be tested, but I think that was my version of QT when I managed to make the proxy of this two codecs).
    -Compressor doesn`t work on any system with QT above 7.4.0.
    -CATDV (http://www.squarebox.co.uk/) version 6 can make proxy versions of this two codecs in TIGER ONLY! They already know of this problem and CATDV 7 works on both.
    -Compressing in compressor with H.264 (same codec as the FCSvr proxy) BUT without changing the resolution, size and etc. Works OK in both Tiger and Leopard.
    -Exporting through QT works in ANY system BUT I loose TC, so it`s not an option (and I can`t input this workflow in FCSvr without using compressor).
    -Exporting from FCP as QuickTime Movie with H.264 doesn`t work on Both (Tiger and Leopard).
    -Exporting fro FCP as QuickTime Conversion with H.264 works but as exporting from QT I loose TC and can`t input this into FCSvr workflow.
    Error message are always: "QuickTime error = -50" or "QuickTime error: corrupted data" (and of course it`s not corrupted because it`s used - even in FCP to edit - and opened viewed, catdv can do proxy and everything).
    I`m surprised not to see anyone freaking out about this issue... I don`t think that It`s only me.
    This is some problems that I came across while trying to find a solution:
    http://www.paulescandon.com/blog/?p=39
    http://discussions.apple.com/thread.jspa?messageID=4912265&#4912265
    http://www.squarebox.co.uk/faq155.html
    http://discussions.apple.com/thread.jspa?messageID=5513003&#5513003
    http://discussions.apple.com/thread.jspa?threadID=1903644&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=1780228
    http://discussions.apple.com/thread.jspa?threadID=1853507
    As you can see this is not the first time I`ve posted about this issue.
    I`m sending a bug report as well.
    Thank You all in advance.
    Regards

    Hi Chará!
    We should, but I think the others will be disappointed eheheheh.
    It doesn`t matter what version of Leopard I`m using (right know I`m using Leopard Server 10.5.6, but this issue has happened even with 10.4 if QT is updated and all updates of 10.5 up, as I`
    ve mentioned above).
    What file size are those clips that are longer than 10min?
    I really don`t get, how it`s possible that just the two of us has HDV and XDCAM files with file size longer than usual? Maybe people that do interviews don`t like to record the entire interview and when capturing those clips would be under this file size limit? Or maybe we are the only ones in the whole world that transcode longer HDV and XDCAM clips (it`s funny that it doesn`t even need to be FCSrv, with only ONE machine and compressor this issue happens all the time).
    I`m convinced that I have to install a Tiger version in a virtual machine with compressor and doesn`t update anything to test this further on. But I`m certain that with TIGER and CATDV this works ok! And I think that CATDV uses QT engine to do this transcodes.
    This is too much of a mystery to me. Maybe it`s time to spend 24+ hours with apple in a international call and probably not getting anywhere.
    I`m only posting this here in FCSrv forum because this issue it`s must worse when you have hundreds of clips with this issue and if you bought the package it doen`t matter if it`s a problem with QT+OSX or whatever, apple has to solve it for FCSrv use.
    Do you reckon?
    Let`s get in touch through email: lucas at rwcine.com.br
    (at = @ and delete spaces).
    Regards

  • Final Cut Server is for video and photo archiving?

    Too many products in the last few years. I used to use iPhoto to archive both photos and video and edit them. Now I have moved to the professional line but it gets more confusing.
    Aperture2: archiving and cataloguing thousands of pictures with minor edits
    Adobe CS4: major edits to my pictures
    FCP6: video edit but with no archiving and/or metadata capability
    Final Cut Server: for what? Can it archive/metadata all my video and all my Aperture files and work
    seamlessly between all these four programs?
    Please help. I am considering buying Final Cut Server. I am both a photographer as well as a videographer running many different cameras over many different kinds of shoots. And I am trying to simplify my work process.
    Thanks,
    Brian

    We were in a similar situation as well.
    We use Adobe products for photo and desktop stuff
    and FCP Suite for video.
    We ingest images with Bridge and add keywords.
    The raw files are backed up and the corrected images
    are processed (Photoshop/Image Processor) and dropped
    into a Final Cut Server watch folder.
    This action automatically adds the files to FCS for
    easy access as well as backs up the images to an
    external FTP in our desktop publishing office across
    town. Desktop has its own version of FCS that adds
    the new files and makes them available for designers.
    When we shoot video we shoot mainly with Sony EX3
    camcorders with SxS media. Footage is downloaded
    and tagged in XDCAM Transfer. The folder that is
    labeled "Import" in the utility is also a watch
    folder which added the files to FCS.
    So in other words Final Cut Server has us organized
    and working together much better than we were before.

  • PIX Redundant Internet Line and Load balancing

    I would like to find out if it's possible to configure my Cisco PIX 525 to use a secondary internet line from a different provider and perform load balancing. I'm using PIX Version 6.3(1)

    PIX version 6.3 does not support Redundancy and load balancing. but PIX/ ASA with version 7.0 supports Redundancy.

  • Switch-independent load-balancing NIC teaming on server-side and MAC/ARP flapping on L2/L3 switches

    Since active deployment of Windows Server 2012, our servers support team began to utilize new feature - switch-independent load-balancing NIC teaming. At first look it seems great - no additional network configuration is required and load balancing is performed by server itself by sending frames in round-robin or some hash algorithm out from different NICs (say two for simplicity) but with same MAC address. Theoretical bandwith is now grown up to 2Gbps (if we have two 1G NICs per server) against failover NIC teaming configuration, when one of two adapters is always down.
    But how does this affect (if does) switching and routing performance of network equipment? From point of view of L2 switch - it has to rewrite its CAM table each time a server sends frame from different NIC. Isn't it expensive operation? Won't it affect switching in a bad way? We see in our logs that same server make switches to change mac-to-port associations several times per second.
    Well, and how does it affect routing, if the switch to which server is connected is L3 switch an performs routing for the subnet server connected to? Will CEF operate well if ARP entry chages several times per second?
    Thank you.

    Since nobody answered here, we created service request and got the following answer (in short):
    L2 MAC flapping between ports is very bad and you must avoid such configurations as much as possible. There is one possible variant that can be considered in your situation - use port-channel (either L2 or L3), in this configuration port-channel will be treted as single port and there won't be flapping.
    Conversation example is here: https://ramazancan.wordpress.com/tag/best-practice/

  • Final Cut Server and Compressor / Qmaster serial conflict

    On my Final Cut Server machine, i have Final Cut Server version 1.1.1. On my Mac Pro i have Final Cut Studio 7. I have installed Compressor and Qmaster on my Final Cut Server from the Final Cut Pro DVD, so i can use Qmaster (the version of Qmaster must match exactly on all machines). But the two serials conflict, Final Cut Server will not start due to the following problem:
    "Either the current serial number is not valid or there is another server using the same serial number.
    Check the serial number and then stop and start the server using the Final Cut Server Preferences panel."
    Of course both serials is completely legit. Is it really true that i either need to downgrade Compressor and Qmaster (FCS will work, but Qmaster will not) or buy FCS 1.5? I have paid lots of money for this setup already, it can't be true that i am forced to update to 1.5.
    Please Apple, a solution?

    I have a similar case. Maybe someone knows how to solve it:
    We installed Final Cut Server and on the same MacPro we installed Final Cut Studio.
    After a while we dedicated this machine to Final Cut server and used the Final Cut Studio license on another nachine.
    Now, if I want to change or add a transcode setting in the compressor, I'm getting the error message: 'conflicting serialnumber' or something like it.
    So compressor thinks it's still part of th FinalCutStudio installation. But I don't quite understand, because Final Cut Server has its own compressor, isn't it?
    How can I solve this without loosing the custom transcode settings I've made in compressor.

  • Final Cut Server 1.5 and QMaster 3.5.2?

    I have a need to setup our Final Cut Server (XServe 10.5.8) to be the Qmaster Services and Cluster Controller with seven workstations to be clients submitting jobs and providing services to the cluster. The current Final Cut Server Qmaster is 3.0.5 on a 'server' subnet and the workstations will soon upgrade to Final Cut Suite 3 with Qmaster 3.5.2 on a different subnet.
    What should be the solution for our environment considering the following issues if they are correct?
    • Qmaster is 3.0.5 cluster and clients need to be on the same subnet?
    • Qmaster 3.5.2 clients cannot service a Qmaster 3.0.5 Services and Cluster Controller?
    • Final Cut Server 1.5 will not run with Qmaster 3.5.2?
    We have just acquired Episode Engine to enable us to export Flash movies. Does Episode Engine provide some solutions for the above or just complicate clustering?

    If you are running Final Cut Server 1.5.x, then Qmaster should be at 3.5 or higher.
    Qmaster 3.0.5 was the correct version for Final Cut Server up to version 1.1.1 only.
    ~D

  • Final Cut Server Petition

    I have started the above pet it ion at: www.pet it ion online.com (no spaces)
    Search for Final Cut Server or FCS. Please sign it, I would love to get this product back.

    I'm finding the promotional material confusing. Apparently you do not have simultaneous read-write capabilities, you check out media dn then check it back in. But it can be located anywhere, on any machine, on any server.
    Max, are you at NAB and seeing the demos?
    This is from the marketing page:
    Use Final Cut Server to automatically catalog your media in any format and in any location. Powerful layered search tools let you find any asset fast, whether you’re in the studio or on the road. Browse thumbnails, poster frames, and proxies generated by Final Cut Server in formats you specify.
    Final Cut Server extracts and reports industry-standard metadata, including IPTC, XMP, and XML data types, so you won’t have to waste time reentering data. Final Cut Server is a seamless extension of the editing workflow in Final Cut Pro. Drag assets from Final Cut Server to any of the Final Cut Studio applications. Use Final Cut Server to organize Productions—including any combination of Final Cut Pro projects, rough cut sequences, media assets, and production documents. Or create a Final Cut Pro project in Final Cut Server and check it out to begin editing; when you check it back in, the catalog updates automatically.
    It all sounds too good to be true.
    We use Canto Cumulus to handle our digital still assets (and much more) but it is beyond "too good to be true." Cumulus is a chimera masquerading as a nightmare.
    bogiesan

  • Has anyone migrated existing file libraries into Final Cut Server?

    My company currently uses Virage to archive thousands of video clips. Currently we only archive proxies and keep a corresponding tape on the shelf -- it's a big library. We want to move away from tape and keep all the clips on a centralized server but we need to be able to move all the existing files over to FCS via an automated process. The clips we keep in Virage has 5 or 6 fields that we would need to migrate over and the thumbnails are mpg2. Has anyone had any experience migrating huge chunks of data over to Final Cut Server? We ditched our Avids and Unity and purchased FCP. Final Cut Server makes sense. (By the way...for what we paid for Virage, I could have purchased Final Cut Server and a Porsche to drive it to the office.)

    My company is implementing FCSrv as a video database. Moral of the story: I did everything from scratch. I took the time to log and digitize all the tapes, creating a file folder structure that corresponds to the tape label. I can say from my experience, you need to organize and have all of your original media ready on the drives that you want the files to live on and THEN upload to FCSrv. I left those drives as Edit In Place devices, created FCSrv assets, and then turned the drives off. The drives only come back on when I want to copy over any of the source files. Also, FCSrv wants to create everything from scratch - its own proxies, thumbnails, and poster frames. Currently I believe the only metadata you could map / migrate over would be fields associated with FCP Log and Transfer media. Another workflow hint I have is to find media that has the same (or most similar) metadata and upload those at the same time (choosing create individual assets). Also, there is a great workflow on the forum for bulk metadata changes that helped me out a lot : http://discussions.apple.com/thread.jspa?messageID=7522555
    Every time I call Apple anymore they try to sell me on purchasing the custom workflow services from an engineer so you could look into that for specific help with your current metadata fields. Otherwise, I'd suggest hiring some interns
    Good luck!

  • Final cut server not serving java client application

    weird situation. today i went to download the java client for final cut server 1.5.1 at my normal address and the webpage came up welcome.. with the ability to download the client application as normal but when i pressed the button to download nothing happened.
    anyone have any ideas how to resolve this? manually removed all of the client java cache on the client machine and also reinstalled fcs 1.5.1 on the server with a restore of the database without any change in functionality. any ideas?

    hello ben,
    thanks for taking your time to help me with the issue i am seeing here. I will do my best to read into what you said and explain.
    1. Network User Permissions Problems.
    maybe you can explain, but i have not authenticated against anything at this point, just went to the normal.. "http://FQDN/finalcutserver"... the normal fcserver webpage comes up but when i click download it does not give me the ability to download the java applet or run a script that maybe delivers the java applet.
    maybe i am not understanding, but what about what i am experiencing looks like a permission issue? permission for fcserver to distribute the java applet to a user who goes to the final cut server web page to download the client?
    If that is the case, would you know where to start looking for permission issues?
    2. Verfy the web server services and comb through the user permissions and services on the server.
    The web services, service is on and when i look at the logs with any reference of final cut server, this is what i see right after when i try to download the client app.
    File does not exist:/Library/WebServer/Documents/FinalCutServer, referer: http://FQDN/~localadmin/webstart/content.php
    as far as the user permissions, what should i look for? there are very few users, the local admin, the open directory admin and 1 other user in od.
    with regard to services running on server 10.6.1 and how they affect final cut server.. checked use of how i would use AFP, DNS lookups, OpenDirectory & network homes, and Web services and appear to be working as far as i can tell.
    hope the above information helps. thanks in advance for helping troubleshoot.

  • Is Final Cut Server is the right software for our company?

    I need a software that catalogs and keeps organize our media. Our company is using Final Cut Pro 2 and want to keep stock footage. Apparently, were not doing a good job of organizing our media and files. I'm researching a software that can organize and catalog media and files. Does Final Cut Server is software can do that?
    Thank you
    Luis

    Yes and no.
    I know that's not the best answer, but final cut server is a very powerful organizational tool, but you also need to very organized in what you put into it and especially during initial setup.
    For example, you say your company is apparently not doing a very good job organizing right now, so lets say you had 300 quick times labeled documentary1.mov, then documentary2.mov and so on, having a piece of software catalogue footage in that manner will not do you any favours in the long run.
    However, if you were to say establish a production, "PBS Documentary" and then ensure that all clips are labeled very specifically, then keeping them and being able to search them as a part of a stock footage library could be very useful, as you are not only able to locate clips based on key words, but also preview the footage to make sure it is something you would want to use, and determine the current location of that file.
    I suggest you check out apple's videos on FCserver, they will give you a pretty good idea of what the software is designed to do.

  • Red Footage and Final Cut Server

    Aloha gang-
    I am still testing FCS in our studio and enjoy many of the features in this product. I love being able to search for footage and pull it into my FCP project with no waiting (using edit-in-place). But I am looking for some advice and knowledge regarding Red Footage.
    My scenerio is this:
    We render all our red footage to offline files that we will use in the post production process. I want to tag all those files with appropriate metadata so our edit team can search and retrieve files as they need it. But with red there are 7 files (in our workflow) that correspond to the same thing. Basically there is the original R3D file which can not be used in FCP, there are the 4 quicktime proxies that the camera generates and live in the same folder as the R3D, and these are the files I want to get back to after the production is through and archived. There is the offline quicktime we generate to edit with which we need to tag. There is a log and transfer quicktime we can log and transfer all this data to FCS (but it doubles the data size so I am not looking to use this one and edit performance is okay at best), and finally there is the folder that the 4 proxies and original red file live in.
    All of these files should be search able by the same metadata. Imagine the shot is of a blue bird. When I type blue bird I would want all of these files to show up (obviously I could limit my search so I only get the version I need for what I am doing i.e. offline, proxie, etc. I have made metadata lookups for this so this is not the challenge.)
    The challenge is I only want to log 1 of these files and have the metadata applied to all of them. They all have almost identical names. The offline, R3D, and folder file have the exact same name. The proxies are identical but with _F, _H, _M, and _P behind them. For the catalog process I only want to transcode proxies for the _M (The _F, _H take way too long and the proxies look the same as _M and the _P is too small
    I could make them a bundle but that does not help too much as the offline lives in a different place as the footage.
    Any ideas would be greatful. My easiest solution is to tag the files twice, once for the production and once for the archive, but this seems like a waste of time that I could have a computer do instead
    P.S. anyone successful in getting the metadata out of the red file, I see the red metadata set, and have it in place, but can not get it to show anything no matter which file I upload.
    Any ideas, or help would be great
    mahalo
    scott

    Thank you for your replies. I guess my question is not really answered because of the conundrum associated with red footage
    But my workflow to get through this will be as follows: (In case anyone is interested)
    Set a scan to bring in the offline quicktimes as they are rendered and have someone tag them with meaningful tags to help us search during the production. I will send those to archive when we are done.
    After the project is completed and the files are removed from Final Cut Server I will set a scan to import all the _M files (they transcode faster and quality is not an issue since it is making proxies) and tag them as best I can for the long haul (archive) I can either leave the media on the drive or back it up, depending on the immediate use of the files. This works very well if the media is still there as I can just drag the _M into Clipfinder and render the shot I need as I need it.
    I am storing these clips in folders labeled CC_LTOXXX (where XXX is the number for the LTO tape which increases by one for each tape I use. When I import them into Final Cut Server from the LTO folder I have a direct line to which LTO tape the file lives on. It's not easy to get the files back (so with files used frequently I will also keep a copy on an external drive I can just plug in) from an LTO, but it is doable.
    If anyone has an easy way to pull a list of files from an LTO tape that would be great, and even better if it could be a list Final Cut Server made, or if Final Cut Server could just pull the files. My LTO is a network drive so I would have to access it through an IP address, but if I could do that I would be golden.
    Anyway I know this will all evolve and this is just where I am right now, any ideas would be appreciated.
    Mahalo
    scott

  • SLS and Final Cut Server

    Hi.
    I'm running FCServer on an iMac, and I'm currently looking for the best solution for giving co-workers outside of our office network remote access to our FCS database. The main purpose for this is for remote users to screen and download episode segments and movies from our database.
    I was initially thinking VPN would be the only solution, but then I saw Snow Leopard Server has 'Mobile Access Server' built right into the OS, which appears designed to help users avoid having to use a VPN.
    Before I go out and buy SLS for the company, I want to be sure it will work. Am I correct that Snow Leopard Server, and the built-in Mobile Access Server, will allow users outside of our network remote access to our FCSrvr database?
    Any help would be greatly appreciated.
    Thank you!

    Thank you for your response.
    I posted this in the Final Cut Server forum as well and got this response:
    +"Mobile Access Server will give outside access as VPN would, which will be handy if you want to access Final Cut Server using the Java client app. It will also give you VPN access for non-FCSvr uses, like email and Web.+
    +If all you want is a subset of your FCSvr database, then you could also publish selected content to a Web/FTP/WebDAV server in your DMZ."+
    If anyone else could offer some insight it would be greatly appreciated. I'm just an audio/video post-production guy, so this is all a little outside of my training.
    Thanks.

  • Final Cut Server 1.x and Final Cut Pro 7

    Are there any compatibility issues with Final Cut Pro 7 (Final Cut Studio (2009) and Final Cut Server 1.x?

    FCSvr 1.5 has the ability to process FCP 7 project files and well as leverage ProRes Proxy Edit Proxy workflows.
    FCSvr 1.5 is recommended for FCP 7.
    I've heard about problem with FCSvr 1.1.1 and FCP 7.
    Are you experiencing anything in particular?
    Let me know
    Nicholas Stokes
    XPlatform Consulting

Maybe you are looking for