Reference Invoice Pop Up not appearing During Import MIGO

Dear Experts ,
I have got two company codes , single tax procedure ( TAXINN)
One of the company code(plant that is ) is excise registered & the other is not .
In case of the excisable firm , certain duties are utilised in excise credit .
For both the procedure followed is :
Make PO
Book MIRO for Customs
Make GR wrt Customs MIRO Number
Book final commercial Invoice to the Vendor
BUT
In case of the company(plant) that is not registered with excise, the POP UP
for refernce MIRO document is not appearing at the time og MIGO.While in case of the other company
(with excise registeration ) it works fine & pops up.
Pls tell me what could be wrong??
Regards ,
Anis

Dear Anees,
when there is no excise involved in the 2nd company code, obviously config settings for excise related would not have been done.Then where is the question of availing credit ?
How can import work without anty excise related config at the background?
Hope has helped you.
thanks
nandu

Similar Messages

NEF thumbnails not appearing during Import

Just started using Aperture2 on my iMac with a Nikon D90. (using NEF or RAW files). When importing images, the thumbnail images appear as blank gray boxes. If I go ahead and import, the files come through into the library just fine. It's frustrating not being able to view the thumbnails as I should, and select/deselect as desired. Any ideas? I've scoured the manuals and online help areas.
thanks,
dave

Right after I posted, I realized you may have meant the camera. After searching every menu palette, and the manual, there is no "tools" menu on the D90, or as far as I could see, a way to change the storage mode. I may end up just having to record in NEF+jpeg if I want to use the previews, and accept less shots per memory card.
thanks,
dave f

Excise tab is not appearing in Import of STO material-MIGO display

Hi Guru's,
Excise tab is not appearing in Import of STO material-MIGO display.
Find the Process steps below.
1)Stock transfer order using NB document type-(Company codes are different)
2)VL10B
3)VL02N-PGI
4)Customs Invoice in Indian rupees.
5)Capture excise invoice-J1IEX(Capture excise invoice w.r.t PO not STO)
6)Goods receipt with Reference excise invoice(Excise tab appearing while posting goods) MIGO
7)Post Excise invoice--Accounting entries everything is correct.
After posting the MIGO when we display Material document in MIGO, excaise tab is not appearing for this scenario only.Rest of all Excise tab appearing.
Note:In J1IEX display of excise invoice in Reference document2 field Material document should be there but not showing its empty field.
Thanks,
VR
Edited by: get_vr on Feb 10, 2010 9:08 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

Invoice document is not appearing in follow-on document list

Dear All,
I am customizing Classic scenario for my client. In our process, Shopping cart only created in SRM 5.0 system where as all follow-on document - PR/PO/GR/IV will be created on back-end SAP ECC 6.0 system.
My Issue:
1. Shopping cart appears in requested 'Check Status' list till the time PR, PO and GR created in back-end ECC system.
    SC disappear in the requester 'Check status' list the moment invoice entered in back-end ECC system. Do the problem
    is due to authorization issue ?
2. Other user who has SRM-Administrator authorization can view all such shopping cart in 'Monitor shopping cart' option.
    All follow-on document such as PR, PO and confirmation are appearing in Status check option both in graphics as well
   as table form. However invoice document is not appearing in the follow on document list. Do I need to enable any
   customization setting so that back-end invoice will appear in follow-on document list ?
<< Moderator message - Please do not offer points >>
Thanks in advance.
Regds,
Jennifer
   I don't find any
Edited by: Jennifer Batty on Nov 30, 2010 3:50 PM
Edited by: Rob Burbank on Dec 1, 2010 4:16 PM

Dear All,
Can some one help me on the below issue.
Thanks,
Jennifer

All my contacts are stored with country code for eg 233 244 123456. Contact names do not appear during incoming calls. Once the country code is removed , names appear. Please help

All my contacts are stored with country code for eg +233 244 123456. Contact names do not appear during incoming calls.
Please help

http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

The progress indicator in version 11.0.1.2 does not appear when a song or podcast starts. It may or may not appear during play.

The progress indicator in version 11.0.1.2 does not appear when a song or podcast starts. It may or may not appear during play. How do I make it appear so I can start a podcast in the middle of the program?

No errors in error console. No effect using *. I tried using the dns name of my localhost both in the Firefox URL and in the javascript and I get exactly the same. I have spent a huge amount of time looking into this issue.
One thing I noticed is that if I use the examples on the internet (http://arunranga.com/examples/access-control/preflightInvocation.html or http://saltybeagle.com/cors/) they work in the same browser. These examples however, are accessed through HTTP proxies.
I am wondering if the issue has to do with using the same hostname just with different ports.

Excise Tab is not appear in the MIGO display --- Import Process

Hi Experts ,
Excise tab is not appear in the display of the material document in Import process.
Process flow.
1. Import Po.
2. Customs clearing (MIRO)
3. Capture excise invoice against the Import Po.(Reference to MIRO document )
4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
after posting the material document , excise tab is not appearing against the material document .
5. post excise against the excise invoice .
Please help.
Thanks
SAP MM
Edited by: Subbas on Aug 16, 2010 11:58 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

Excise Invoice tab during Imports MIGO

Hi
During MIGO for an Imports PO (after doing MIRO for Customs) the system suggest the Commercial Invoice no. in a pop-up & the following happens:
1) If I ACCEPT this commercial invoice no. & move ahead to complete the MIGO, the system does not open up the 'Excise Invoice' tab in the MIGO header.
2) If i DELETE the commercial invoice no. & move ahead to complete the MIGO, the system opens up the 'Excise Invoice' tab in the MIGO header.
Why is this so?
Why does the system suggest the commercial invoice no. here? What are the implications of accepting it or deleting it?
mnp_sap

Hi,
In Import procurement cycle, you have to capture excise invoice in J1IEX after posting Customs Invoice in MIRO and then do MIGO, here refer excise invoice already captured and after GR POsting, post the excise Invoice in J1IEX.
So check whether you have captured the excise invoice before GR Posting
So follow the below process;
1. Create Import PO - ME21N
2. Post Customs Invoice - MIRO
3. Capture Excise Invoice (BOE) - J1IEX
4. Post GR (Here refer excise invoice) - MIGO
5. Post Excise Invoice (BOE) - J1IEX
7. Post Import Vendor Invoice - MIRO

SRM Shopping cart pop up not appearing in EP 6 portal

Hello
I have set up the SRM business package in the EP6 SP13 portal. If I create a Shopping Cart via the ITS then leave the transaction (say by clicking on another transaction a popup would come up and warn me that I have not saved the shopping cart and would lose my work.
However via the portal, this message doesn't appear.
Does anyone have any ideas how to get this pop up to appear on the portal iview?
Thanks
Rebecca

Hi!
As Detlev suggested the only "standard" solution is to use Portal's EPCF dirty flag.
In SRM transactions when you are in change (or similar) mode in the HTML source code of the SRM transaction there is a flag (JavaScript variable) that refers to this state.
You have to check this Mode flag, and set the Portal's EPCF flag accordingly.
There are many ways you can achive this little trick.
E.g.
-In every SRM transaction the WPINTEGRATION.JS file is included, so you can put sour code here.
-Or you implement SRM transactions via a proxy html page (stroing it e.g. at the Portal KM), which is called via an URL iview.
Once you made this Portal will not let you close an SRM transaction when it is in change/create mode without a warning.
Hope this little overview gives you enough to start with.
BR.
Richard

Appset not appearing after import

Hi Friends,
We are on bpc75nw sp04.
Custom appset(A) is correctly imported into target system. I'm able to see in backend(BW), but in fron-end(BPC admin/BPC excel) not appearing. Could any one suggest, what might be reason? How to know install user id of BPC system?
Basis consultant, tried with different user ids like install user, & other users, but he couldn't see at server level as well client level.
I checked uje_user table, it shows appset(A) avialable to USER1.
I hope with USER1 id only, we are able to see appset (A).
Regards,
Naresh

Log: import ended with warning.
   Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
   Start After Import for AppSet XXXX in Client 500 for RFC MDX PARSER
   Import Step UPDPTAB completed without errors
   Import Step ADMIN_DEF_UPD completed without errors
   Import Step APPS_ADD completed without errors
   After Import method for AppSet XXXX finished successfully
   Start of data checker messages
   The file service structure is correct.
Dimension ACCOUNT's master is empty!
Dimension ACCT's master is empty!
Dimension CATEGORY's master is empty!
Dimension CHANNEL's master is empty!
Dimension COST_COMP's master is empty!
Dimension C_ACCT's master is empty!
Dimension C_CATEGORY's master is empty!
Dimension TIME's master is empty!
   BPF: Validation error; No template access is defined for template "Sales Flow"
   BPF: Validation error; member item "REGION 2" is not in drive dimension "LOCATION"
   BPF: Validation error; hierarchy "PARENTH1" is not in drive dimension "LOCATION"
   BPF: Validation error; member item "REGION 1" is not in drive dimension "LOCATION"
   BPF: Validation error; hierarchy "PARENTH1" is not in drive dimension "LOCATION"
   BPF: Validation error; member item "REGION 2" is not in drive dimension "LOCATION"
   BPF: Validation error; hierarchy "PARENTH1" is not in drive dimension "LOCATION"
   BPF: Validation error; member item "REGION 1" is not in drive dimension "LOCATION"
   BPF: Validation error; hierarchy "PARENTH1" is not in drive dimension "LOCATION"
   BPF: Validation error; member item "INDIA" is not in drive dimension "LOCATION"
   BPF: Validation error; No template access is defined for template "SALES_PLANNING FLOW"
End of data checker messages
   End of after import methode RS_APPS_AFTER_IMPORT (Activation Mode) - runtime: 00:19:35
   Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
   Nothing to delete.
   End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
   Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110207110512
   Post-import methods of change/transport request BQ1K900069 completed
        Start of subsequent processing ... 20110207104537
        End of subsequent processing... 20110207110512
   Execute reports for change/transport request: BQ1K900069
      on the application server: sparbdb
    Ended with return code: ===> 4 <===

Released request are not appearing in import queue

Dear experts,
Released requests are not appearing in the import queue. Can any one help me to get these requests in import queue.
rgds.....
Art

Hello Ratna,
Can u please check that once u release the request from DEV it should be appear in QA COFILE and DATAFILE or not...u have to physically check it .....
and if yes then u can also import that file through ADDTOBUFFER and IMPORT command at command prompt level.

While merging lines in prepare mass additions invoices lines do not appear

Hello,
I am facing an issue in merging mass additions line. I dont see any lines to merge even though many invoice line exist. I even tried query mode where i query the lines based on the invoice number but still lines do not appear for merge.
detailed steps:
Press open button on an oh hold item in the mass additions summary window.
Enter additional information and select done.
Back in the mass additions summary window, pick the first mass addition item again and press 'merge'
button.
Select the other new mass additions items that you want to merge into one asset.
-> Problem, the other new items do not appear for selection.
It was working fine till few months back but seems some patch have created this issue. Have you faced such issue?
We are on 12.0.6.
Any pointer is helpful.
Regards
Bipin

I wish I had a 10.3.9 machine to check, but, since your video card should definitely be up to the task, I think it's probably going to be that Keynote's having a unique problem with your setup. In Keynote, under the Keynote menu, choose "Provide User Feedback" and send your problem to Apple. It could be that it may not have been reported yet.

Partner selection pop-up not appearing while saving

HI Experts,
I have maintained partner determination procedure, based on this there is pop-up box triggered for selecting the partner for service team, but the same is not appearing when i change the determination time to "When saving" but the pop-up box is triggered when the determination time is "recurring", is there any ways we can trigger this pop-up box when i serach for the service team durring entry.
Thanks & Regards
Milan

Thanks for the reply Anil.
Please find the code below.
The requirement is simple.
1)we need to go to VT02.
2)delete the stages and then save.
In step 2 ( when we hit on delete, sy-ucomm 'TSLP', the pop up should appear.
But it is not appearing.
the lines in bold is the code that is added for the pop to come.
But it is still not coming.
report YCONV no standard page heading.
include bdcrecxx.
start-of-selection.
perform open_group.
perform bdc_dynpro      using 'SAPMV56A' '0011'.
perform bdc_field       using 'BDC_OKCODE'
                              'UETS'.
perform bdc_field       using 'BDC_CURSOR'
                              'VTTK-TKNUM'.
perform bdc_field       using 'VTTK-TKNUM'
                              '7505000593'.
perform bdc_dynpro      using 'SAPMV56A' '0040'.
perform bdc_field       using 'BDC_OKCODE'
                              'MKAL'.
perform bdc_dynpro      using 'SAPMV56A' '0040'.
perform bdc_field       using 'BDC_OKCODE'
                              'TSLP'.
**begin insert
*PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0100'.
*PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                             'YES'.
**end insert
perform bdc_dynpro      using 'SAPMV56A' '0040'.
perform bdc_field       using 'BDC_OKCODE'
                              'SICH'.
*begin insert
perform bdc_dynpro      using 'SAPLSPO1' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              'YES'.
*end insert
PERFORM BDC_TRANSACTION USING 'VT02'.
perform close_group.

Pop up not coming during BDC recording

Hi,
When i try to create asset transfer using ABUMN, while saving a pop window comes up showing the asset number that got generated.
But while i do the recording for the same tcode this particular pop up window does not appear.What happens is because of this i am not able to capture the asset number that got generated after doing the call transaction.MESSTAB returns no value even if the posting was success..How to get that asset number tat got generated..
Regards
Ansari

> i am not able to capture the asset number that got generated >after doing the call transaction.MESSTAB returns no value
are you sure..? did you check the messagetab check all the message variable once again
MSGV1
MSGV2
MSGV3
MSGV4

Labview vi controls not appearing during Teststand Editor run time

Hi,
I'm running established sequences (TS3.5) and vi's (LV8.2) in Teststand 4.2 and Labview 2009.
During sequence execution in the Editor environment, vi's are called which display simple yes/no
user controls.
I am finding that when the Labview step is called the controls are only appearing briefly, if at all.
The execution appears to have entered Labview waiting for a control to be operated, but
the only way forward seems to be termination of the sequence.
On termination, the controls immediately appear allowing selection, but on doing so the sequence
does terminate normally.
There are 2 vi's, the 1st is called early and has only shown this problem rarely,
but the 2nd called later in the sequence always displays this problem.
Another vi which displays a progress bar, executes in a separate thread without problems.
We also notice that the additional task on the task bar does not appear as normal when
the vi's are called.
Any ideas why the controls are not displayed until sequence termination, please ?
thanks,
Gary.

Make sure you are checking the "Show Front Panel" checkbox on the Module specification panel. Not having that checked is the most likely explanation.
Hope this helps,
-Doug

Reference Invoice Pop Up not appearing During Import MIGO

Similar Messages

Maybe you are looking for