Reflection of PRD A/c in COPA Report

Dear All,
Can any body please clarify me on the following points:
1.When we define one Price Diffrence Gain/Loss A/c,Exchange Gain/Loss A/c ,Inventory Diffrences-Gain/Loss A/c and Revaluation of Inventory-Gain/Loss A/c.My point is how the values of gain or loss arising out of these GL accounts will be reflected in COPA Report.(i.e Gain value will be with '-' sign and Loss will be with '+' sign and how net effect will be reflected in the Report)
2.If the values are not reflected correctly,then should we define GL accounts separately for gain & loss accounts. or
3.Is there any configuration to be done (if so please let me know steps) to achive the desired results by defining one GL a/c for Gain & Loss.
Regards
Subbu

Hi Subbu
This is addressed in the standard design itself... Gains and losses are updated with diff signs
Post a document for each scenario and test for yourself... It will be more clear
br, Ajay M

Similar Messages

  • Discount are reflecting with wrong sign in COPA Reports..

    HI,
        We have checked the +/- sign in one of the conditon type which is assigned to Value fields VV210(Discount and markdowns).
    Now due to this check mark values of discount from Billing document are reflecting as negarive in COPA reports which is wrong. For the Debit memo's all values should reflect in COPA as positive, but for discount it is reflecting as negative.
    So now we are having almost 400+ invoices which are having this issue. So how can we correct this sign in COPA. Is there any way that can help us to change the sign from - to +.
    Kindly suggeset...
    Regards....

    In the rules of engagement, you will see that he most important rule is to SEARCH before you request a question.
    It is the hallmark of a good configurer that he will search high and low for a solution.
    Your question is not complicated, but it is very involved, and has been answered on this forum before, more than once.

  • Material regrouping in MM02 not reflecting in COPA report

    Hi,
    In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
    I am designing report for three companies by using material group 1,2,3,4 and 5.
    We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
    Please suggest on how should we rectify our material grouping to reflect in COPA report.
    Regds

    Hi,
    in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
    If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
    TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
    This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
    To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
    If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND.

  • Issue in COPA Report Creation

    Dear All,
    I ave an issue in creation of COPA repor in KE30
    We have created all P&L item as cost element except
    1.Change in WIP for WIP calculation in Product Costing
    2. Price Difference (OBYC- PRD) Variance will be calculated from settlement profile
    Values in COPA are
    1.     VV001  - Quantity (KWBRUM) Quantity field
    2.     VV002 u2013 Price  (PR00) Revenue account of sales (Cost Category 11)
    3.     VV002 -  Material Cost-COGS (VPRS)
    4.     VV003 -  Discount Given (SD Condition)  (Cost Category 12)
    5.     VV005 u2013 Fright (SD Condition)  (Cost Category 12)
    6.     VV005 u2013 Misc Exp (SD  Condition) (Cost Category 12)
    7.     VV006 -  Consumption and Cost of Production, Revaluation, inv diff account
    8.     VV007 u2013 admin expenses
    9.     VV008  - Employees cost
    10.     VV009 u2013 financial cost (interest paid etc deprecation cost, audit exp)
    11.     VV010 u2013 Settlement of Variances of Production order (from settlement profile)
    12.     VV011 - Other income GL accounts (including Exch Rate Diff, profit on sale of asset etc)
    From VV005 to VV009 all the GL account included are created as primary cost element (C category 01)
    and assigned in OKB9 as transfer to PA structure and assigned in PA transfer FI (direct posting form FI)
    VV011 u2013 all the GL account created as Revenue (Cost Category 11)
    Issue we are facing
    1. In Consumption and Cost of Production GL account (Movement type 101 and 261 from production order ) we are not
    able to generate Profit analysis document.
    2. Price difference also come in picture at the time of Stock transfer and Price diff GL account is not created as cost element and how to flow that in copa, price difference from settlement will come from settlement profile.
    Format we have created for COPA report is like
    1.Quantity Field
    2.Selling Price  (PR00)
    3 Material Cost (VPRS)
    4 Discount Given
    5. Fright
    6. Misc Exp
    7. Consumption and Cost of Production, Revaluation, inv diff account
    8 admin expenses
    9. Employees cost
    10. financial cost
    11 Settlement of Variances of Production order
    12. Other income
    13 Net Profit (Calculated Values ) ( 2- 3-4-5-6-7-8-9-10-11+12)
    Is this a correct logic I applied kindly suggest.
    Regards
    Bittu

    Dear All,
    Any suggestion..
    Bittu

  • COPA Report

    Hello ,
    The data for one G/L account (i.e X) is not getting updated in COPA report. We just realised that the G/L account X is not been created as cost element. Thus we created now it as cost element with category as 12.
    But the output of COPA report  for the past datas are not  getting reflected by that G/L X amount.
    Kindly let me know is there any way where in we can update those datas in COPA now.
    Thanks and Regards,
    Deepa

    Hello Abhishek,
    My source data is Billing document.
    One value for GL account X was not flown to COPA report .
    So I was trying to use the T.code KE4S ( input parameters -update control -selected first option i.e check for existing records)
    But in the standard report , the G/l value was not getting captured in any COPA.
    Kinldy guide me in this .
    Regards,
    Deepa

  • Regarding COPA report related to refurbishment Process

    Hi ,
    When I am running a refurbishment process in IDES system is taking the GL a/c 895000- Factory output of production when I take the refurbishable material from store and return to inventory.
    My question is whether all the financial posting done here for refurbishable material  should be reflected to COPA report or not?
    If yes, I am unable to see this particular G/L account posting in COPA. What could be the reason?
    Regards
    DP.

    Hi
    Whether it is right G/l,
    It's depends on you & your fico & client team.
    If this account exclusively defined for refurbished material,then it is right and if this g/l is defined for any other transaction then it wrong one.
    Now Related to COPA entries,
    Settle the order for which you are consuming this material by KO88, (Remove tick mark of TEST RUN)
    Go to details>>>Accounting document>>>double click on Profitability analysis
    and see values are updated in Cost field or not.
    Kapil
    Edited by: Kapildev Farakte on Nov 25, 2009 11:18 AM
    Edited by: Kapildev Farakte on Nov 25, 2009 11:20 AM

  • What is the functionality to create report tree for copa reports

    Dear Fellow members,
    Good day to you!
    I would need your advise on how to create report tree for the list of COPA reports created by users in Production. Note that currently power user is using KE30 to create these reports. Due to its sensitivity, I need to prevent users from knowing the list of reports created. Basically just wanted to allow user to execute the few copa reports revelent to his area like Channel P&L.
    Many thanks in advance & cheers.. !
    from Elaine

    Dear Mohammed azam
    Thanks for your reply.
    Before i can create the menu tree, i need to create the same report name and form name in DEV client, create the report tree with this report name. The report name & form name not necessary have to be t same format at the one in production client. meaning, you can create just a row and a column. That's it you can perform the normal landscape of transporting the report tree to QAS & PRD.
    Thanks & cheers !
    elaine

  • COPA Report Data Inconsistency

    We have our QA box refreshed with PRD Box. So the data in the two systems is same. I have created summarization level for COPA report Ke30 because report is taking too long in PRD as data comes directly from segment levels.
    The numbers for the basic report in QA that are coming from the summarization levels do not match with the numbers of basic report in PRD. While these numbers were matching when summarization level was not used in QA. But these numbers match when I go to the line item level for the brands etc.I am unable to find why the numbers at the basic report level does not match. Any help is greatly appreciated.

    Check the CE3xxxx table.  Are the number of records the same from PRD and QA? If no, then data is missing.  If yes, then the report could be the source of the problem.

  • COPA Report Update

    Hi all,
    I just reset some value field in COPA Costing based, but the it does not affecting the historical data in the COPA report.
    Does anyone familiar with this situation. Is there any program to run?
    Any help would be appreciated.
    Thanks,
    Lea

    Hi there,
      you have to regenerate the CO-PA report in order to have the new settings reflected in the report. Hope this help.
    best regards,
    Ronny

  • Restatement and COPA Reporting

    Hello Everyone,
    I was wondering if anyone could share their experience with COPA reports with restatement...basically how to handle COPA restatement and reports.  Any pitfalls, anything at all.
    Thanks everyone,
    Colleen

    Hi Ashok,
    My email is [email protected]
    Thanks,
    Colleen

  • COPA reporting using costing keys

    Hi,
    I am using costing keys to access the different cost estimates in COPA. I have done the necessary configuration - created valuation strategy and assigned a point of valuation and assigned two costying keys - one for current and one for future costs. I have also mapped my value fields to each cost component. I mapped the one value field twice (representing each costing key) to each cost component.
    My question is, when it comes to reporting, how do I show the values seperately that correspond to each costing key? Since I have the same value field being valued with current and future cost estimates, how are these shown separately in the COPA report? Or do I have to use two different value fields per cost component?
    Much Appreciated

    Just read the SAP documentation which says that you need to enter different value fields for the different costing keys (up to six).
    Thanks to those who attempted.

  • Currency type in COPA report

    I created a form to generate a COPA report.  I selected "both company code and operating concern currency types while creating the form.  Now, I need to be able to give the currency type as variable to have the user print the copa report whatever currency they want to print.  It's cost based COPA /
    How can I get the currency type as selection option?  please advise.
    Thanks,
    Sri

    From the form's general selection, select the currency type and define as local variable.

  • Sales order values not coming in copa report can been seen in ke24

    hi
    i have did sd and billing and actual settlement through va88
    i can able to values in ke24 actual line items.
    but when i cant able to see values in ke30 copa report aganist sales order characteristic
    and aganist record type A values are not flowing in copa report.
    please help me.
    thanks
    kareem

    hi ajay,
    i have again prepare actual line items report from ke94 ,ke91 and executed report ,
    here for that particular sales order values are flowing through record type C but not flowing for record type A.
    sales order is not displaying for record type A.
    and for that c only revenue and  and  raw material cost is flowing.
    thanks
    kareem

  • Want to add number of sales orders in a COPA report or form

    Hi All
    I created a COPA report that has two columns: sales from sales orders & sales from billing documents. Now I want to add columns which shows number of sales orders that make up sales. Can any one explain me , how can we acheive this  With a user exit, .
    thanks in advance for looking into this

    Hi Steve,
    Walter is very right in saying so.
    In SD module itself you can get some reports like this.
    Even in COPA you will get these kind reports.  But if your company is a big company and have lots of sales orders,
    Then you will have serious problems with System performance issue. 
    When you define that sale order is a segment level character, then system will ear up the resources and take very long time in executing the reports.
    But for some reason this requirement is a must case, then it is very simple
    you define Sale order in either form or report,
    then give the variable parameters like Co.Code, Period etc. you will get all the sales orders details for the selected period
    But think about not going for it before you make up your mind
    Best Regards
    Surya

  • How to Add a new Selection Field in COPA Report

    Hi Gurus
    I'm new on SAP COPA reporting and I don't know how to solve this problem.
    I need add a new Selection-screen field (char1), not connected with any characteristic.
    This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT  
    ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
    Thank-you in advance for your help.
    Claudio

    Hi
    I'll try to explain better my need.
    I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
    Using the customizing I fill these key-figures using some rules.
    The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
    Can you suggest a better solution ???
    I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
    Thanks for help.
    Claudio

Maybe you are looking for

  • I cannot remove embedded barcode from the image. Due to saving compression.

    Hi guys, I recreate a thread to prevent confusing on my previous one. Please only reply to this thread thanks. Ok, for a start I will give some general description about the application I made. I had some problem with the image being compressed while

  • Apache Mod-Rewrite Question

    I'm using the following mod-rewrite rules on one my websites, which is a database-driven CMS: RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$ About/index.php?bout=$1 [L] RewriteRule ^World/([a-zA-Z0-9()_/-]+)/?$ World/index.php?area=$1 [L] RewriteRule ^Topic

  • Im trying to restore my phone

    Randomly my phone turned off and I went on itunes to restore it and now my phone is stuck on the load screen and itunes says waiting for iphone do I just wait it out to see if it works ?

  • *** I keep getting a render error

    I am trying to conform my HDV footage and keep getting the same warning. Specs: Project is HDV - length 53 minutes Video and audio render files set to a drive that has 149.8gb of space left on it. Here is the message I keep getting: "Render Error: In

  • How to create customer master IDOC

    i need to create outbound IDOC for sales order i need suggestions regarding this.