Reformatting a document layout and its trouble

Hello,
I have a 210 page document that is to be printed as a booklet. The pages are "facing" each other, meaning they are in spreads. The pagination for each page corresponds to the left or right-hand page meaning, in this case, the page number on a left-hand page is to the far left and, on the right-hand pages, the page number sits far right. All pages were made to print for a three-ring binder so all art justifies further left or right depending on the corresponding left or right-hand page. Nothing is centered is the clearest way to explain that point. One of the clients in Australia, who is using a pdf of the original document (the main client will not release the book in it's original InDesign form), wants to select single pages indescriminantly and print them and is asking for a pdf of pages in "non-facing" spreads or in single pages.
I thought it might work if I simply changed the layout to show single pages and not in spreads. Unfortunately, the program reads the single pages as separate pages thus placing the pagination to the right on every page. If I make a pdf of the new document, the page numbers in half of the document are on the wrong side. Does anyone have a workaround solution to re-laying out a spread document and keeping the page numbers for the left-hand pages to the left side?
Thanks, I hope that was clear.
Eubean

What is the time size of the finished document, and wah t is the page size in Doucment setup? Is it set up as facing pages now, or do you have two panels on a single page? Are the pages currently in consecutive order?
If the file is set up as facing pages in consecutive order (readers' spreads -- what your reader will see when the booklet is finished), then you need do nothing more than export a PDF as single pages (i.e. don't check the spreads box).

Similar Messages

There is a difference between the document total and its components

Hi!
I have an error message "There is a difference between the document total and its components" when I want to create an InventoryGenEntry
the problem arises from time to time and my customer must do the document two or three times before it is created.
I have seen in this forum and in notes that this is probably being caused by a Rounding.
I am using 2 digits for amounts, 4 digits for prices, 6 digits for rates and 3 digits for quantities.
For information my customer use SAP 2005 and the patch level 46.
This problem happened only in InventoryGenEntry. how can I modifiy parameters to resolve this problem?
thank you for your help.
Best Regards
Séverine

Hi Séverine,
Do you find any additional code added to SBO_SP_Transaction stored procedure. A similar issue with stock transfer fixed in later patch. Please test in latest patch.
Regards,
Vijay kumar
SAP Business One Forums Team

Difference between the document total and its components in inventory transfer

Hi Everyone!
When I make Inventory Transfer, SAP notice error "There is difference between the document total and its components.".Everyone that knows this problem, Pls help to find way to solve it.
Thanks & Best regards
Ngoc Loan

Hi,
Please refer to the thread.
There is a difference between the document total and its components
Hope Helps!
Regards,

Error Message "There is difference between document total and its component

Error message number 439-138. Is there a sight I could look up error codes?
There is difference between document total and its components

Hi Deborah ,
Please look at this thread..
Error when adding AP invoice
So far it looks like a bug
You can also search in sap service market --support --sap notes
there are plenty of threads in forum .....
Hope this helps
Bishal

Is text mining operations on document binary and its HTML output is simiar?

Does the text mining operations differ when I perform on document binary or its HTML output? Do you think the results would be the same, if i performed clustering operation on the HTML or text output of a binary document instead of its binary file.
Please comment!

I assume you are trying to put an anchor tag in a text item, that points to a document stored elsewhere in the Portal repository.
Use a direct access URL (search the online help for info on these) to construct the link to the document. You can use a relative URL by leaving out the "http://server.domain:port" part of the URL - e.g. {a href="/pls/portal30/docs/FOLDER/MYROOTFOLDER/MYSUBFOLDER/MyDocument.DOC"} - I'm using {} here instead of <> because real tags get messed up in these forum messages.
The Portal FAQ explains how to use httpd.conf to define a redirect directive.
Regards,
Jerry
null

Document interface and its implementation

Hi All.
I have a rather simple question - I just can find non-ambiguous answer
So, all implemetations of Document (e.g PlainDocument) have tree-like structure, where each node implements javax.swing.text.Element interface.
My question is:
Does only the LEAF Element contains text, i.e. actual data that was entered by user?
Or can I found text in non-leaf elemets?
thanx.

Elements don't actually contain text, they just represent the structure of a document. However, every character is covered by one and only one leaf element, never directly by a branch element.
http://java.sun.com/products/jfc/tsc/articles/text/element_interface/index.html

Workflow - move document set and the content

Hi,
I am working on "simple" solution to move document set and its content to different library.
Source and destination libraries were created using the same template.
I can copy documents from inside the doc set to other library but workflow doesn't work when run on doc set....
Any tip?
Thx

Plz check the following thread for similar issue
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/5b8a3126-fa85-4e59-b785-02df7c277c87/copy-a-document-set-to-another-library-via-an-spd-workflow?forum=sharepointcustomizationprevious
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

Can I mix Pages page layout and word processing together in one document?

Hello there ! I am quite new to Pages and I am desperate to learn as i want to get rid of everything being Microsoft
As you all know when you open Pages you can choose between page layout and word processing !
the thing is i thought that after using a page layout you could just go with word processing easily... well no, you can't, but i'm sure i'm missing something...
For exemple i really like the catalogue brochure and it would be perfect for me to start a project... but after a few pages, i can just add blank pages and if i want to type text, i have to add text boxes... i don't want that, I want word processing... and another thing in this brochure i can't add table of content because it is not by default in the template...
So my question is quite basic here, can we link Page layout and word processing without having to use text boxes and everything ?
Thanks in advance !
Have a good day

Alexander,
Welcome to Apple discussions.
The simple answer is no. What differentiates page layout from word processing mode is that the PL mode has no text layer. So everything that goes on the page must be an object of some kind. And any pages you add to a PL document must also be PL. You can't mix the two modes. One way around it is to start with a blank page, insert a text box, then stretch the box so that it covers the entire page. You can the type in it as if it were a text layer in a WP file. You can even capture that page so that you can add it automatically when you need it, or save it as a template.
As for building a Table of Contents, it appears that Pages only sees text styles that are on the text layer, which means it won't see styles that are in objects -- which means it won't work with a PL document. From being a long-time reader of this discussion group, I've noticed it's rare that someone wants to add a ToC to a PL document.
If you find that you're going to be mixing text and graphics, start with a word processing template. If you really like the Catalog Brochure, you could always copy some or all of its elements over to a blank WP template.
Hope this helps.
-Dennis

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I would also recommend to write the description into the meta data. This would allow to place a text frame above the image and it is possible to add meta information and file name automatically together with the image, when you place it or even in a prepared template.
Meta data information can be written easily in Bridge in the Meta File Workspace.

I have installed adobe pdf to get a document sent to me thru my employer and i put my password in and its still asking me for a document password do i need to set one up

I have installed adobe pdf and put in my password and its still asking me for a document password in which I have no idea what it is

So you put your password in when you installed it?
If that's the case, that was just your administrator password used to allow the install. It has nothing to do with the document.
If the document is asking for a password, you'll need to get that from the person that added a password to the pdf.
If neither of the above helps, please give us more info on what you are attempting to do and what is going wrong. LEtting us know your version of Adobe Reader may also be helpful.

Exception:"Decrease the number of char between the beginning of the document and its root element"

I'm now using a javabean in my jsp page to parse xml;when my xml file's size is
about 10k,it just work fine;when my xml file's size became 50k,it throws the followng
Exception:
Failed to open xml document,Failed to retrieve Public id or system id from the
document. Decrease the number of char between the beginning of the document and
its root element. But when I run this javabean in JBuild ,it works fine no matter
how big the xml file becomes;
Why? the error message is in the attachment.

The prologue must be included at the top of the document, followed by the root
          element.
          joden2000 wrote:
          > what does this exception mean:decrease the number of char between the beginning
          > of the document and its root element? When my xml file is about 10k,it works
          > just fine,when it becomes 50k ,the exception show.How can I deal with this?

HT1349 Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and

Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and all other accessories .So , kindly help me as early as possible .Thankyou and tell me about its solution
<Email Edited by Host>

Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

I love AI love Apple. I own an iMac, a MacbookPro, an iPad, and an iPhone. I've been a loyal Mac user since the '80's. But, please, when are you going to do something about iCal and its Reminders component? Attaching documents is clumsy. If you're on

I love AI love Apple. I own an iMac, a MacbookPro, an iPad, and an iPhone. I’ve been a loyal Mac user since the ‘80’s. But, please, when are you going to do something about iCal and its Reminders component? Attaching documents is clumsy. If you’re on iCloud, as I am, repeating events is impossible. The ability to copy text or graphics into either events or Reminders doesn’t really exist. This is an easy fix. Why not get it done?

Maybe things will improve this summer,
http://www.apple.com/macosx/mountain-lion/features.html
Regards,
Captfred

Document about BO Perfomance Management Architecture and its tiers

Where Could I see a schema or chart of PM XI Architecture with its tiers integrated in BOXIr2 Structure?Can you indicate or send me a document where I can see the PM services (AA...) and its BOXIr2 tiers of belonging? Note: I see the BOXIr2 Administrator's Guide and I see that only BO processes are present in Architecture's Schema. In the PM Administrator guide I did not found any Architecture's Schema.

Hi,
I didn't fully understand your environment. You have 2 virtual nodes, right? Let's say node1 and node2. Now, where is your NFS storage and what do you plan it will contain?
Regarding Oracle documentation, there are 2 NFS "vendors", one is standard NFS (exported by any linux/unix machine), the other one is vendor supported NFS (such as Netapp, EMC, etc.).
Oracle RAC files (OCR, voting and database) are supported on the second one only. It is not supported to use standard NFS for database files. However, if you wish, you can put 1 voting on a standard NFS (this is for cases where you have 2 locations for the RAC and you want to have another voting in a different site).
In any case, if I understand correctly you have node1 exporting NFS to node2 for the RAC. If this is true it is not supported, and generally a bad idea because you lose your entire high availability (if node1 fails, you got nothing).
HTH
Liron

Erase a document and its show a message asking for a password

I try erase a document and its show a message asking for a password of the administrator, and them the document don't go to the trash. How can I solver this?
I alredy try change the definitions and preferences of the finder and don't solve the problem.

Choose your Home folder "Get Info" (command-i) and be sure you have "read & write" in the Sharing & Permissions section. Check under "General" section to be sure it isn't locked. If that is correct, launch Applications/Utilities/Terminal and at the prompt copy & paste this command…
mkdir ~/.Trash
Press return.
If you get a message that the folder already exists, copy & paste these commands...
sudo chown $UID ~/ .Trash
Press return.
Enter your admin password (it will be invisible)
Press return.Then enter
chmod u+rwx ~/.Trash
Press return. Log out and back in, or restart.

Reformatting a document layout and its trouble

Similar Messages

Maybe you are looking for