Refrence number in Production order and purchase requisition
Dear All
This is MTO scenerio where sales order is created with refernce to quotation,
Subsequently in MRP run it creating sales order reservation for quotation number not sales for sales order number
similarly while creating purchase requisition it is displaying refernce number as quotation number
My requirement is instead of quotation number sales order number should display in production order and purchase requisition
All answers r suitably rewarded
regards
Hi
Pl check schedule line category you have set for quotation.
In sch. line for quotation remove checkmark for transfer of requirement and remove automatic Pr generation.
This will give required result.
Regards
Mandar
Similar Messages
-
What is the exact difference between Purchse order and purchase requisition
Hi all,
What is the exact difference between Purchse order and purchase requisition.
ThxHi,
<b>Purchase Requisition</b>-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Related Table EBAN
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
<b>Purchase Order(PO)</b>-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Tables:EKKO,EKPO
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Vendor, Material ,Qty are mandatory for PO.
Regards,
Padmam. -
The relationship between production order and purchase requistion After running MPS
Dear Experts:
I met a issue . My users want to know the relationship between production order and purchase requistion . In my company we create production order and purchase req. by running MRP. our operations are:
1. T-CODE: MD41 create planned order .
2. T-CODE: CO41 convert planned order to production order .
3. T-CODE: MD15 convert planned order to purchase Requisition.
but I can't find the relation of them. would you like to give me some advices? thank you very much.Hello
On the standard MTS process there is no link between the requirement (STO) and the replenishment element (production order).
See the below extraction from note 12955:
There is no index that the system could use to determine which issue element (sales order, planning, reservation, dependent requirement, ...) is covered by a certain receipt element (purchase order, production order, purchase requisition, planned order, stock level ...).
A production order, for example, can be created to cover several different requirements, even when you are using lot sizing procedure EX.
You can use transaction MD09 or MD04to determine the pegged requirements, but they are calculated dynamically and there is not fixed link between requirement and receipt.
BR
Caetano -
Purchase order and purchasing requisition .
Hi
What is the difference between Purchase order and Purchase requisition . ?
And why cube are different for them ?
RegardsA purchase requisition is an internal document that's created to initiate a procurement transaction. The requisition is created to identify the materials that are needed to be acquired and when they're needed. Once completed by the initiator, it's sent to the appropriate approvers.
Upon approvals of the requsition have been provided, and a vendor is selected, a purchase order is created. The purchase order is an external document whereby an agreement is made to procure the materials at an agreed upon price and delivery schedule
The InfoCubes for each of these is different due to the nature of the documents (internal v. external). -
How to bifurcate production order and purchase order
hi all,
is it possible to bifurcate all open production order and purchase order quantity of items.
ex:i have one item like ffp001 it is showing 100 order quantity.but i want only open purchase quantity.i checked (item master data-->righ click--->Avail to promise) its showing open production and purchase quantity.so i need only open purchase quantity.
Plz tell me the process of Bifurcation of open orders.
thanks&Regards,
P.PratapHi,
By default there is no option , as a workaround you can use below method,
Create 2 warehouse , for example Purchase , Production
When ever you create purchase order use "Purchase" warehouse, Use production warehouse in production
In the "Available to Promise" Report you have warehouse filter option.
Using this filter you achieve can achieve your requirement.
OR
Right click "Filter Table"
Document -> Start with-> PO
Now you can see only PO
Refer below image -
Sufficient stock but MRP create planned order and purchase requisition .
Hi Expert,
After MRP run planned order and purchase requisition created . but the problem is for child material sufficient is there but still PR and plnd order is created .
MRP type PD, LOT size EX,Strategy group 10, for testing purpose I made safety stock 0, min lot size 0 , max lot size 0.
I cant find the cause why MRP create PR and Pland order for the material which has sufficient stock. Please help.Dear Anirban
could you check the following master data value:
Lot size -> MB Monthly ( only for test)
Rounding value -> null
Strategy 40 MTS.
You can try with this setting in order to figure out what is the problem.
You can check also orizzon planning and re-scheduling (set to 999).
Let me know if i have been useful for you
Daniele -
Block Plan Order and Purchase Requisition in Sales order creation.
Please tell me, how to block Plan Order and Purchase Requisition while creating Sales Order. When we create a sales order, plan order and purchase requisitions are also created by their own, please tell me, how can we block them while creating sales order. Please do let me know as soon as possible.
hi,
generally thy wil not be created automatically.
may be som configuration or exit is used in ur system.
check in debugging mode while saving ur salesorder. -
Conversion of Planned Order to Production order or Purchase requisition
Hi Experts,
When a planned order is converted to a production order or a purchase requisition, is it permanently deleted from the database?
Thanks for your help.
Regards,
RoseHi,
Yes in SAP planned is getting deleted once converted into production order or purchase requisition. But you can check its no in assignment with both in future for any reference.
Hope this will help you.
Regards,
Ashish -
Link tables of Sales Order and Purchase Requisition
Hi,
thru which tables we can get the data of purchase requistion for a sales order.
regards,
baluDear Balu,
the fields VBEP-BANFN and VBEP-BNFPO are filled in the third-party process only. It means that there is 1:1 connection between the schedule line of the sales order and the purchase requisition. In the third-party process during saving the sales order the purchase requisition is created automatically and is linked to the order.
If the fields are empty, it means, you have no third-party process and no 1:1 connection between the sales order and the purchase requisition. Probably the sales order created normal requirements, which generate purchase requisition(s) after MRP run. In this case you cannot see the purchase requisition from the sales order as there is no 1:1 connection. You have no chance to get the data from sales order to the purchase requisition.
The only possibility which you (may be, it depends on the process) have, is to find sales order numbers from the purchase requisition: so to develop the process backwards. These data are stored in the database table EBKN: Purchase Requisition Account Assignment.
Please use the following fields:
EBKN-BANFN - Purchase requisition number (key field)
EBKN-BNFPO - Item number of purchase requisition (key field)
EBKN-LOEKZ - Deletion indicator in purchasing document (key field, can be helpful)
The corresponding sales orders are stored in:
EBKN-VBELN - Sales Document Number
EBKN-VBELP - Sales Document Item
EBKN-VETEN - Schedule line number
I hope, this information will help you further and will solve your problem.
Kind regards,
Akmal Vakhidov
Development Support SD, SAP, Walldorf/Germany -
Relation b/n Contract, SA, RFQ, Purchase Order and Purchase Requisition
Hi All,
Could you please explain relation between
Contract
Schedule Agreement
RFQ
Purchase Requesition
Purchase Order
Regards
SwamyYou may get better responses in MM forum than in FI.
<b>Purchase Requisition and Purchase Order</b>
Purchase Requisition is created by any users who ever want any item for whatever purpose. This is routed to appropriate authority within the organization. When approved, the same can be converted to a Purchase order -
Is there a link between ASCP released planned order and purchase requisition?
Hi,
i'm new to EBS. would like to know is there some kind of link on table level between a released planned order with purchase requisition?
thanksHi,
As explained by Abhishek, we do not maintain any link between the PLANNED ORDER from which a requisition is created and the actual requisition.
The simple reason being... in general, businesses run the plans on a daily basis and each time the plan is run, the previous data is overwritten... so there is no point in retaining the information of the planned order from which you are creating the requisition.
Hope that helps.
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers. -
Firmed planned order and purchase requisition
Hi gurus,
could anyone explain firmed planned order and firmed purchase requisition, please based on the following detail questions.
1.when planned order was converted into PR, we call it firmed PR, right?
2.when manually change a PR and save it, we call it firmed PR, right?
3.are these the only 2 ways to firm PR? if not, what else?
4. how to firm planned order?
5. in MRP, the on-order stock is defined as "composed of fixed and firm receipt elements (PO, firm planned orders, firm purchase requisitions), while in MD04, we always see all the PR created by MRP running, are these newly created PR firmed automatically?
Thanks,
cookieHI,
Check the link
http://help.sap.com/saphelp_45B/helpdata/en/f4/7d2ca444af11d182b40000e829fbfe/frameset.htm
Regards
KK -
User Exit/BADI for Purchase Order and Purchase Requisitions
HI,
I have a requireent where i have to check the the user does not enter both Subitems and Over a Limit for a Service Purchase Requisition.
Is there a User Exit or Badi that i can use where this information is availaible.
also i have to check that release strategy is assigned to every purchase order where the version has been completed.
Is there a User Exit or Badi where Information of EREV table is availaible.
Regards,
Tarun BahalFor Purchachase requisition , the BADIs and USER EXITS are
ME_COMMITMNT_PARKING BAdI for Redefining Commitment Interface When Parking
ME_MEREQ_PARKING BAdI Purchase Requisition: "Hold"
ME_REQ_HEADER_TEXT Copy Header Text: Enjoy Purchase Requisition
try with the above BADI's
MEREQ001 Customers' Own Data in Purchase Requisition
for Purchase order , the BADIs and USER EXITS are
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_BAPI_PO_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PR_CREATE_02
ME_BSART_DET Change document type for automatically generated POs
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_COMMITMENT_RETURN Commitment for return item
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_REQ_POSTED Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
SMOD_MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting
LMELA010 Inbound shipping notification: Transfer item data from
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Rece
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition rel
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requi
M06E0004 Changes to communication structure for release purch. d
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., previe
MEFLD004 Determine earliest delivery date f. check w. GR (only P
MELAB001 Gen. forecast delivery schedules: Transfer schedule imp
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toler
MM06E001 User exits for EDI inbound and outbound purchasing docu
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into P
MM06E008 Monitoring of contr. target value in case of release or
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound proces
MMAL0004 ALE purchasing info record distribution: Inbound proces
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001
Regards,
Anirban -
Relation between sales order and purchase requisition in MTO senario
Hi:
guru,In MTO sinarnio,for example strategy group is 20 or 50,how to get the raw material requisition according to every sales order item,semi-finished production orders should be exploded to raw material purchase requisition.In other words, how to beulid the relation between them and which tables data can be retrieved?your advice will be appreciated.Hi Wang,
To view Sales Order Itemwise status, use MD4C.
Keep patience becuase in first go through it may look bit confusing.
Secondly, to generate Component requirements there are two ways.
1) Use MD41 - Run it on FERT code. It will generate requirements upto last level of BOM
or
2) Use MD02
2nd option would not work if MRP type 'M0' or equivalent is used in FERT Material master. In that case only 1st option would work.
Hope your question is answered. -
Purchase Order and Purchase Requisition
Hi To All,
my customer while using tcode me2m hase extracted purchase order opened since 2007. now he want to close all this order and settle them to zero. this operation should be done also for the purchase requisition.
there is a standard way to do this? if not any idea?
thanks
C.Hello
Just by doing
In the PO line item level details, activate DELIVERY COMPLETED check box.
system will not close po from GR
U will have to check what is the gr qty did till date
and update the po with the same qty manually
eq
if po qty is 50 and total gr done till date is 40
change the PO qty to 40 and save
this is the way u can shot close the po
Which effects has the "delivery completed" indicator?
The purchase order item is considered closed, even though the total quantity may not have been delivered.
Although a further delivery is not expected, it is still possible.
At the time of the next goods receipt, the system suggests the item as unselected.
The purchase order item can be deleted, even if the total quantity was not delivered.
Although the "delivery completed" indicator is not set, a purchase order item is still considered closed if the full quantity has been delivered. In this case, the "delivery completed indicator" is not required.
The system allows to make further goods receipts. Why?
Answer
See note 16239 and 856279
hope this helps
Edited by: Umakant Bhangale on Oct 11, 2010 5:20 PM
Maybe you are looking for
-
Need help with httpd/tomcat/jsr223/php
Hello, I�m new to tomcat, but have been working with httpd for years. (now I find out how different the two are) I�m having some problems getting php to play nicely with tomcat. Here�s my configuration: RHEL4 2.6.9-34.0.2.ELsmp apache-tomcat-5.5.17 h
-
Button getting cut off on left side when highlighted
I'm battling with an issue that I cannot figure out. I have a DVD menu built in Photoshop. The menu items are simple text items with a duplicate (=1) for the highlighted part when someone mouses or uses remote to select. The (=1) hightlight is a it
-
Seeburger Adapter - attachment handling
Hi, we have a supplier who sends us the edi files over X.400 with more than one EDI-Attachment. In the standard configuration of the X400P7-Adapter you can choose if you get the documents as MainDocument or as Attachment, but only one attachment. How
-
Cursor Variables in Pro*C/C++
I have very strange behaivour of the client application that uses cursor variable. I have Oracle 8i enterprise 8.1.6 release for Sun/Solaris. The follow SQL is installed on server: create or replace package dummy is type vemap_cur is ref cursor; end;
-
My itunes music isn't syncing to my iphone?
Help! Of all the times that I have synced my itunes with my iphone... THIS TIME it's done something crazy. Everytime I hit sync "entire music library" it shows a significan amount of space being taken up on my phone but once I hit "sync" within 5 sec