Refresh Assesment Fails. Collect New Inventory Data Fails
I successfully used MAP 9.0 to collect data from 3 separate domains over the course of the past few days.
Upon trying to add one more domains details, stepping through the inventory wizard, it fails when trying to run.
Close and reopen the program. Same issue.
Also notice that the lovely charts and stats are no longer displaying.
So I click the Refresh Assessment link. Now that also fails.
I've looked for log files to no avail and have also searched for anyone also experiencing this issue.
I found one result for a much older version of map around performance counters needing to be reset. But that did not help.
Suggestions?
The MAP log file is located here: "%LocalAppData%\Microsoft\MAP\MapToolkit.log"
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.
Similar Messages
-
Hi all,
with LMS 4.1 running on solaris 10 I discovered the follwing.
Adding larger amount (>10) of devices one after the other (via DCRCLI) results in IC_Server no longer collecting the Inventory-Data nor ArchiveMgmt will collect Configs and after some while DataCollection (ANI) will get stucked in endless loop.
After that (navigating in CW2k-WebUI) the UI freezes.
Is that a known problem with Interprocess-Communication and Eventbus in LMS 4.1???
Any feedback is welcome.
Best Regards
LotharAfter stopping the system I discovered that RmeDbEngine won't stop.
Issuing dbstop command also results in RmeDbEngine still running.
We had to kill process with signal 9. -
How can a webpage refresh automatically if some new data has entered the da
hi,
How can a webpage refresh automatically if some new data has entered the database.
with thanks
jp reddyThere have been several discussions on related topics. HTTP/HTML is not a "push" protocol and therefore is not well suited for this type of application. I would recommend setting a reasonable refresh rate using a META tag or switching to another technology (i.e. Applets) that can provide a push environment.
-
Hardware and Software inventory data shows blank in SCCM 2012
Hi All,
I have this issue. When i try to view the inventory data for hardware and software it shows blank data. Below is the screenshot of that. Mine is a lab setup and i have only 2 clients configured.
I am using the default client settings which comes with priority of 10000. I altered the inventory setting to pull .dll and .exe files with changing the interval. But still the same issue. I analysed the InventoryAgent.log and found the below error on both
the clients.
Inventory: 1 Collection Task(s) failed.
InventoryVersionNumber for '{00000000-0000-0000-0000-000000000003}' not found.
CInvState::CheckInventoryAgentConfig: Get() failed: 80041002
Can any one please help.
Gautam.75801Hi Garth,
A reboot just fixed the issue on that system in which the options are not coming to run the setup manually.
As i had hibernated the VM's and the server in which those options were not coming is the physical box hosting the VM's (SCCM server and one more client). The physical box is also acting as a client and the SQL server holding the SCCM Database.
Now things which need to be troubleshooted are:
1. Why is it Hardware inventory report appearing after running the setup manually and not appearing automatically.
2. The software inventory report is not appearing at all even after it is being run manually.
Below is the screen shot of the default client settings policy i am using.
Software inventory:
Hardware inventory:
My LAB setup is as follows:
SCCMSVR.labtest.com - Is the SCCM server and Fail back status point, Asset intellegence sync
point and etc.
Server.labtest.com - Is the Domain controller, SQL server
SCCMTEST.labtest.com - A testing machine to push the client and to deploy patches in it.
Site code is LAB
Grath - What do you suggest is the next Plan of action which you suggest ?
Gautam.75801 -
Requirement to get Inventory data at the Daily level (non-cumulative KF)
Hello All,
Kindly provide ur suggesstions on the issue mentioned below:
We require the Inventory data at a daily level. Also we require that the non-cumulatve Key Figures such as 0TOTALSTOCK, etc. be available to us in the BW itself, since this is required for further processing.
PS: Right now we are using RSCRM_BAPI to execute the qurey and store the data into a table, but it fails for non-cumulative keyfigures. Kindly suggest if ther are other ways which can suffice the requirement mentioned above.
Thank you.
Regards,
Kunal GandhiAnother one?
You should read this link: https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement -
Encountered problem(s) when trying to collect OUI inventory
Hi,
In the dbconsole of the EM show de message "Encountered problem(s) when trying to collect OUI inventory : Failed to collect OUI inventory: no oraInstaller in java.library.path Failed to collect OUI inventory: null". what is the problem ?
Thanks.
O.S. Windows Server 2003 R2 x64Thanks Eric Jenkinson, I have not found errors in with Opatch.
I enclose result to you:
GRAVE:OPatch invoked as follows: 'lsinventory '
INFO:Starting LsInventorySession at Thu Jan 04 11:18:06 CET 2007
INFO:Lsinventory Output file location : C:\oracle\product\10.2.0\db_1 \cfgtoollogs\opatch\lsinv\lsinventory-2007_Jan_04_11-18-06-CET_Thu.txt
INFO:--------------------------------------------------------------------------------
INFO:Productos de nivel superior instalados (1):
INFO:Oracle Database 10g 10.2.0.1.0
INFO:Hay 1 productos instalados en este directorio raíz de Oracle.
INFO:
INFO:No hay parches temporales instalados en este directorio raíz de Oracle.
INFO:
INFO:--------------------------------------------------------------------------------
INFO:Finishing LsInventorySession at Thu Jan 04 11:18:07 CET 2007
I have not found either errors that make reference to the problem of the inventory in the archives that you indicate. But that I have found the following errors in the emagentfetchlet.log file:
007-01-04 11:07:54,921 [main] WARN track.OracleInventory collectInventory.683 - Check emd.properties for OUI classpath entries.
2007-01-04 11:07:54,984 [main] WARN track.OracleInventory collectInventory.683 - Check emd.properties for OUI classpath entries.
2007-01-04 11:07:54,984 [main] ERROR track.SnapshotFactory collectSnapshot.240 - ECM: Error occurred while collecting Oracle Software: Encountered problem(s) when trying to collect OUI inventory :
Failed to collect OUI inventory: no oraInstaller in java.library.path
Failed to collect OUI inventory: null oracle.sysman.comm.ecm.trk.GettingComponentException: Encountered problem(s) when trying to collect OUI inventory :
Failed to collect OUI inventory: no oraInstaller in java.library.path
Failed to collect OUI inventory: null
at oracle.sysman.emd.ecm.track.OracleInventory.createLiveSnapshotComponent(OracleInventory.java:336)
at oracle.sysman.emd.ecm.track.InventorySnapshotComponentType.createLiveSnapshotComponent(InventorySnapshotComponentType.java:88)
at oracle.sysman.emd.ecm.track.SnapshotFactory.collectSnapshot(SnapshotFactory.java:203)
at oracle.sysman.emd.ecm.track.SnapshotFactory.main(SnapshotFactory.java:358)
What problem that this happening? Thanks for the help ! -
Hi,
I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?
So and idea of way I dont get data from or servers? Missing client setting for servers?
/SaiTechHi,
I do see the server in Server collections in "Monitoring--Client Status--Client Activity" but not in reports like "Clients with failed client check details" i get "No Data Available"?
/SaiTech -
Hi,
I need to add a new Employee data, which transaction allow me to do that?
By the way, I have create a web service out BAPI_PERSDATA_CREATE, when i try to use the web service to create a employee data, it keep giving me Deserialisation failed error. How to solve this?
Regards,
RaydenLook at the following OSS notes
-Note 892944 - Deserialisation failed
-Note 830340 - SOAP request - Deserialisation failed
-Note 1118825 - Providing the payload with synchronous Web services
Good luck !
Thanks,
Saquib -
Problem: new entered data is saved but I am facing one error message --- no
This is a module program for gate entry of materials(miro). This is a simple entry form which updates z tables with data entered. I have to send the new record details automatically through mail to the particular vendor email id from where the material has been purchased.
Problem: new entered data is saved but I am facing one error message --- no authorization to unpack list with rfc when the program is sending list through mail.
PROGRAM ZMMI001_GRN_ENTRY_BARCODE MESSAGE-ID ZMM .
*Table Declaration
TABLES : EKKO , EKPO , LFA1 , MARC ,
MARD , J_1IMTCHID , EKET , MSEG,
MKPF , ZMMT001_GRN_GATE,
ZMMT002_GRN_ITEM.
TABLES: ADR6.
*Table Control Declaration
CONTROLS : TC1 TYPE TABLEVIEW USING SCREEN 1000.
DATA: COLS LIKE LINE OF TC1-COLS.
*Internal Table Declaration
DATA : BEGIN OF IT_TC1 OCCURS 0,
SEL,
SNO(2) TYPE C,
ITEMCODE(18) TYPE C,
ITEMNAME(40) TYPE C,
QUANTITY TYPE P DECIMALS 2,
EXCISE(13) TYPE P DECIMALS 2,
END OF IT_TC1.
DATA : IT_TEMP_TC1 LIKE IT_TC1 OCCURS 0 WITH HEADER LINE.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : IT_EKPO LIKE EKPO OCCURS 0 WITH HEADER LINE.
DATA : IT_EKKO LIKE EKKO OCCURS 0 WITH HEADER LINE.
DATA : IT_EKET LIKE EKET OCCURS 0 WITH HEADER LINE.
DATA : WK_ZMMT01 LIKE ZMMT001_GRN_GATE.
DATA : IT_ZMMT01 LIKE ZMMT001_GRN_GATE OCCURS 0 WITH HEADER LINE.
DATA : IT_ZMMT02 LIKE ZMMT002_GRN_ITEM OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF IT_TEMP_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF IT_TEMP_EKPO.
DATA : BEGIN OF IT_MSEG OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
EBELN LIKE MSEG-EBELN,
EBELP LIKE MSEG-EBELP,
BUDAT LIKE MKPF-BUDAT,
MENGE LIKE MSEG-MENGE,
END OF IT_MSEG.
DATA : BEGIN OF IT_TEMP_MSEG OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
EBELN LIKE MSEG-EBELN,
END OF IT_TEMP_MSEG.
DATA : BEGIN OF IT_TEMP_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
END OF IT_TEMP_MKPF.
*Data Declaration
DATA : WK_SNO TYPE I,
WK_LIFNR LIKE LFA1-LIFNR,
WK_EBELN(10) TYPE C,
WK_VBELN(10) TYPE C,
WK_FKDAT TYPE D,
WK_NAME LIKE LFA1-NAME1,
WK_SCHNO(10) TYPE C,
WK_CHALNO(10) TYPE C,
WK_CHALDATE(10) TYPE C,
WK_GRNO(10) TYPE C,
WK_GRDATE(10) TYPE C,
WK_VEHICLE(10) TYPE C,
WK_CARRIER(10) TYPE C,
WK_FREIGHT(13) TYPE P DECIMALS 2,
WK_MDOC(3) TYPE C,
WK_DEPT(7) TYPE C,
WK_MODE(7) TYPE C,
WK_BASIC(13) TYPE P DECIMALS 2,
WK_EXCISE(13) TYPE P DECIMALS 2,
WK_TAX(13) TYPE P DECIMALS 2,
WK_APPVAL(13) TYPE P DECIMALS 2,
WK_CHAL(2) TYPE C,
WK_FORM38(9) TYPE C,
WK_COMMENT(30) TYPE C,
WK_MAKTX(40) TYPE C,
WK_LINES TYPE I,
WK_TOTAL LIKE MARD-LABST,
WK_LGORT LIKE MARD-LGORT,
WK_EXCISE_IND,
WK_TOT_EXCISE LIKE EKPO-NETWR,
WK_DIFF LIKE EKPO-NETWR,
WK_BSTYP LIKE EKKO-BSTYP,
WK_BSART LIKE EKKO-BSART,
WK_DIFF_QTY LIKE EKET-MENGE,
WK_101_QTY LIKE EKET-MENGE,
WK_102_QTY LIKE EKET-MENGE,
WK_122_QTY LIKE EKET-MENGE,
WK_WERKS LIKE EKPO-WERKS,
WK_CHAR_SNO TYPE STRING,
WK_DATE LIKE SY-DATUM,
WK_TIME LIKE SY-UZEIT.
DATA : WK_DATE1 LIKE SY-DATUM,
WK_DATE2 LIKE SY-DATUM,
WK_FISYEAR TYPE I,
WK_CHAR_YEAR(20) TYPE C.
DATA : V_UCOMM TYPE SY-UCOMM,
V_INDEX(10) TYPE C,
V_QUANTITY(8) TYPE C.
**DECLARATION FOR INPUT HELP*
TYPES : BEGIN OF VALUES,
TXZ01 LIKE EKPO-TXZ01,
MENGE LIKE EKPO-MENGE,
MATNR LIKE EKPO-MATNR,
END OF VALUES.
TYPES : BEGIN OF VALUES1,
EBELN LIKE EKKO-EBELN,
END OF VALUES1.
TYPES : BEGIN OF VALUES2,
NAME1 LIKE LFA1-NAME1,
LIFNR LIKE LFA1-LIFNR,
END OF VALUES2.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES WITH HEADER LINE,
VALUES_TAB1 TYPE TABLE OF VALUES1,
VALUE_EBELN TYPE TABLE OF VALUES1.
VALUES_TAB2 TYPE TABLE OF VALUES2.
DATA : VALUES_TAB2 TYPE VALUES2 OCCURS 0 WITH HEADER LINE.
DATA : RETURN_TAB LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE.
*nidhi
DATA: BEGIN OF IT_LFA1 OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
ADRNR LIKE LFA1-ADRNR,
END OF IT_LFA1.
DATA: BEGIN OF IT_ADR6 OCCURS 0,
ADDRNUMBER TYPE ADR6-ADDRNUMBER,
SMTP_ADDR TYPE ADR6-SMTP_ADDR,
END OF IT_ADR6.
*nidhi
*& Module FILL_TABLE_CONTROL OUTPUT
text
MODULE FILL_TABLE_CONTROL OUTPUT.
READ TABLE IT_TEMP_TC1 INTO IT_TC1 INDEX TC1-CURRENT_LINE.
ENDMODULE. " FILL_TABLE_CONTROL OUTPUT
*& Module READ_TABLE_CONTROL INPUT
text
MODULE READ_TABLE_CONTROL INPUT.
*Validation for Item code
CLEAR : EKPO-MATNR,
EKPO-WERKS.
IF sy-uname = 'GATE1020'.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR
SY-UNAME = 'ABAP' ).
**SELECT SINGLE bstyp FROM EKKO INTO WK_BSTYP WHERE ebeln = wk_ebeln.
**SELECT SINGLE bsart FROM EKKO INTO WK_BSART WHERE ebeln = wk_ebeln.
READ TABLE VALUES_TAB WITH KEY MATNR = IT_TC1-ITEMCODE.
**ELSE.
SELECT SINGLE MATNR WERKS
FROM EKPO CLIENT SPECIFIED
INTO (EKPO-MATNR , EKPO-WERKS )
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
MATNR EQ IT_TC1-ITEMCODE.
ENDIF.
IF SY-SUBRC NE 0 AND NOT IT_TC1-ITEMCODE IS INITIAL.
CLEAR it_tc1.
MESSAGE E003 WITH TEXT-002.
ELSE.
SELECT SINGLE MAKTX FROM MAKT
CLIENT SPECIFIED
INTO WK_MAKTX WHERE
MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND SPRAS = SY-LANGU.
ENDIF.
ENDIF.
**SELECT SINGLE bstyp FROM EKKO INTO WK_BSTYP WHERE ebeln = wk_ebeln.
**SELECT SINGLE bsart FROM EKKO INTO WK_BSART WHERE ebeln = wk_ebeln.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
IF WK_BSART = 'ZLR' .
Validation for Quantity.
IF NOT IT_TC1-QUANTITY IS INITIAL.
READ TABLE VALUES_TAB WITH KEY MATNR = IT_TC1-ITEMCODE.
IF SY-SUBRC EQ 0 AND IT_TC1-QUANTITY GT VALUES_TAB-MENGE.
MESSAGE E003 WITH TEXT-013.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*Validation for Max.Stock Level
CLEAR : MARC-MABST.
SELECT SINGLE MABST FROM MARC
CLIENT SPECIFIED
INTO MARC-MABST
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND
WERKS = EKPO-WERKS.
CLEAR : MARD-LABST ,
MARD-INSME .
SELECT SINGLE labst insme FROM mard
CLIENT SPECIFIED
INTO (mard-labst , mard-insme )
WHERE MANDT = SY-MANDT AND
matnr = it_tc1-itemcode
AND werks = ekpo-werks.
SELECT SUM( LABST ) SUM( INSME ) FROM MARD
CLIENT SPECIFIED
INTO (MARD-LABST , MARD-INSME )
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE
AND WERKS = EKPO-WERKS.
CLEAR : WK_TOTAL.
WK_TOTAL = MARD-LABST + MARD-INSME + IT_TC1-QUANTITY.
IF WK_BSART = 'ZLR'.
IF WK_TOTAL GT MARC-MABST.
MESSAGE E001 WITH IT_TC1-ITEMCODE.
ENDIF.
ENDIF.
Appending the table control data to Internal table
READ TABLE IT_TEMP_TC1 INDEX TC1-CURRENT_LINE.
IT_TC1-SNO = TC1-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MODIFY IT_TEMP_TC1 FROM IT_TC1 INDEX TC1-CURRENT_LINE.
ELSE.
READ TABLE IT_TEMP_TC1 WITH KEY ITEMCODE = IT_TC1-ITEMCODE.
IF SY-SUBRC NE 0.
IT_TC1-ITEMNAME = WK_MAKTX.
IF IT_TC1-ITEMCODE IS INITIAL.
CLEAR IT_TC1.
ELSE.
APPEND IT_TC1 TO IT_TEMP_TC1.
ENDIF.
ELSE.
MESSAGE E003 WITH TEXT-004.
ENDIF.
ENDIF.
CLEAR : J_1IMTCHID-J_1ICAPIND.
SELECT SINGLE J_1ICAPIND FROM J_1IMTCHID
CLIENT SPECIFIED
INTO J_1IMTCHID-J_1ICAPIND
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND
WERKS = EKPO-WERKS.
IF SY-SUBRC EQ 0.
IF J_1IMTCHID-J_1ICAPIND = 'N'.
WK_EXCISE_IND = 'N'.
ELSE.
WK_EXCISE_IND = 'E'.
ENDIF.
ENDIF.
ENDMODULE. " READ_TABLE_CONTROL INPUT
*& Module USER_COMMAND_1000 INPUT
text
MODULE USER_COMMAND_1000 INPUT.
V_UCOMM = SY-UCOMM.
CASE V_UCOMM.
WHEN 'WK_SAVE'.
IF WK_APPVAL > 0.
IF ( SY-UNAME = 'STORE1010' OR SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR SY-UNAME = 'STORE1080' ).
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = WK_VBELN
IMPORTING
OUTPUT = WK_VBELN.
SELECT * FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = WK_EBELN
AND
LOEKZ NE 'X'.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKKO INDEX 1.
WK_BSTYP = IT_EKKO-BSTYP.
ENDIF.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND LOEKZ NE 'X'.
SORT IT_EKPO BY EBELN EBELP.
IF WK_BSTYP = 'L'.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
SORT IT_EKET BY EBELN EBELP ETENR.
LOOP AT IT_EKPO.
CLEAR WK_DIFF_QTY.
LOOP AT IT_EKET WHERE EBELN = IT_EKPO-EBELN
AND EBELP = IT_EKPO-EBELP
AND EINDT LE SY-DATUM.
WK_DIFF_QTY = WK_DIFF_QTY + IT_EKET-MENGE -
IT_EKET-WEMNG.
ENDLOOP.
IF WK_DIFF_QTY GT 0.
IT_TEMP_EKPO-EBELN = IT_EKET-EBELN.
IT_TEMP_EKPO-EBELP = IT_EKET-EBELP.
IT_TEMP_EKPO-MATNR = IT_EKPO-MATNR.
APPEND IT_TEMP_EKPO.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF WK_BSTYP = 'F'.
SELECT * FROM EKET
CLIENT SPECIFIED
INTO TABLE IT_EKET
WHERE MANDT = SY-MANDT AND
EBELN = IT_EKPO-EBELN.
LOOP AT IT_EKPO.
CLEAR : WK_DIFF_QTY.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP.
IF SY-SUBRC EQ 0.
WK_DIFF_QTY = IT_EKPO-MENGE - IT_EKET-WEMNG.
ENDIF.
IF WK_DIFF_QTY GT 0.
IT_TEMP_EKPO-EBELN = IT_EKET-EBELN.
IT_TEMP_EKPO-EBELP = IT_EKET-EBELP.
IT_TEMP_EKPO-MATNR = IT_EKPO-MATNR.
APPEND IT_TEMP_EKPO.
ENDIF.
ENDLOOP.
ENDIF.
SORT IT_TEMP_EKPO BY EBELN EBELP.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GODYNPRO-PO_NUMBER'.
PERFORM BDC_FIELD USING 'GODYNPRO-PO_NUMBER'
WK_EBELN.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
IF WK_EXCISE_IND = 'E'.
PERFORM BDC_FIELD USING 'J_1IEXHEAD-EXNUM'
WK_VBELN.
PERFORM BDC_FIELD USING 'J_1IEXHEAD-EXDAT'
WK_FKDAT.
PERFORM BDC_FIELD USING 'GOHEAD-LFSNR'
WK_VBELN.
ELSE.
PERFORM BDC_FIELD USING 'GOHEAD-LFSNR'
WK_VBELN.
ENDIF.
CLEAR : WK_CHAR_SNO.
WK_CHAR_SNO = WK_SNO.
CONDENSE WK_CHAR_SNO NO-GAPS.
PERFORM BDC_FIELD USING 'GOHEAD-BKTXT'
WK_CHAR_SNO.
LOOP AT IT_TEMP_TC1.
READ TABLE IT_TEMP_EKPO WITH KEY MATNR =
IT_TEMP_TC1-ITEMCODE.
IF SY-SUBRC EQ 0.
CLEAR V_INDEX.
V_INDEX = SY-TABIX.
CONDENSE V_INDEX NO-GAPS.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GODYNPRO-DETAIL_ZEILE'.
PERFORM BDC_FIELD USING 'GODYNPRO-DETAIL_ZEILE'
PERFORM BDC_FIELD USING 'GODYNPRO-DETAIL_ZEILE'
V_INDEX.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GOITEM-ERFMG'.
PERFORM BDC_FIELD USING 'GOITEM-ERFMG'
CLEAR V_QUANTITY.
V_QUANTITY = IT_TEMP_TC1-QUANTITY.
CONDENSE V_QUANTITY NO-GAPS.
PERFORM BDC_FIELD USING 'GOITEM-ERFMG'
V_QUANTITY.
PERFORM BDC_FIELD USING 'GOITEM-LSMNG'
V_QUANTITY.
perform bdc_field using 'GOITEM-LGOBE'
WK_LGORT.
ENDIF.
ENDLOOP.
CALL TRANSACTION 'MIGO' USING BDCDATA
MODE 'E'
UPDATE 'L'.
IF SY-SUBRC NE 0.
MESSAGE E003 WITH TEXT-003.
LOOP AT SCREEN.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
LEAVE PROGRAM.
ELSE.
CLEAR : WK_TOT_EXCISE.
IF NOT WK_EXCISE IS INITIAL.
LOOP AT IT_TEMP_TC1.
READ TABLE IT_EKPO WITH KEY MATNR = IT_TEMP_TC1-ITEMCODE.
IF SY-SUBRC EQ 0.
WK_TOT_EXCISE = WK_TOT_EXCISE +
( ( ( IT_EKPO-NETWR / IT_EKPO-MENGE ) * 16 / 100 )
IT_TEMP_TC1-QUANTITY ).
ENDIF.
ENDLOOP.
WK_DIFF = WK_EXCISE - WK_TOT_EXCISE.
IF WK_DIFF LE 0.
WK_DIFF = -1 * WK_DIFF.
ENDIF.
IF WK_DIFF GE 1.
WK_COMMENT = 'Difference in Excise. Please Check!'.
ENDIF.
ENDIF.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKPO INDEX 1.
WK_WERKS = IT_EKPO-WERKS.
ENDIF.
SELECT * FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
INTO TABLE IT_ZMMT01
WHERE MANDT = SY-MANDT AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
SORT IT_ZMMT01 BY SERIAL DESCENDING.
READ TABLE IT_ZMMT01 INDEX 1.
WK_SNO = IT_ZMMT01-SERIAL + 1.
ELSE.
WK_SNO = 1.
ENDIF.
CLEAR WK_ZMMT01.
WK_ZMMT01-MANDT = SY-MANDT.
WK_ZMMT01-SERIAL = WK_SNO.
WK_ZMMT01-WERKS = WK_WERKS.
WK_ZMMT01-EBELN = WK_EBELN.
WK_ZMMT01-LIFNR = WK_LIFNR.
WK_ZMMT01-CHALNO = WK_CHALNO.
WK_ZMMT01-CHALDATE = WK_CHALDATE.
WK_ZMMT01-BILLNO = WK_VBELN.
WK_ZMMT01-BILLDATE = WK_FKDAT.
WK_ZMMT01-GRNUMBER = WK_GRNO.
WK_ZMMT01-GRDATE = WK_GRDATE.
WK_ZMMT01-VEHICLE = WK_VEHICLE.
WK_ZMMT01-CARRIER = WK_CARRIER.
WK_ZMMT01-FREIGHT = WK_FREIGHT.
WK_ZMMT01-MDOC = WK_MDOC.
WK_ZMMT01-DEPT = WK_DEPT.
WK_ZMMT01-PAYMODE = WK_MODE.
WK_ZMMT01-BASIC = WK_BASIC.
WK_ZMMT01-EXCISE = WK_EXCISE.
WK_ZMMT01-TAXAMT = WK_TAX.
WK_ZMMT01-APPVAL = WK_APPVAL.
WK_ZMMT01-CHALINV = WK_CHAL.
WK_ZMMT01-FORM38 = WK_FORM38.
WK_ZMMT01-COMMENTS = WK_COMMENT.
WK_ZMMT01-CDATE = SY-DATUM.
WK_ZMMT01-CTIME = SY-UZEIT.
WK_ZMMT01-PERSON = SY-UNAME.
IF WK_FKDAT+4(2) = '04' OR
WK_FKDAT+4(2) = '05' OR
WK_FKDAT+4(2) = '06' OR
WK_FKDAT+4(2) = '07' OR
WK_FKDAT+4(2) = '08' OR
WK_FKDAT+4(2) = '09' OR
WK_FKDAT+4(2) = '10' OR
WK_FKDAT+4(2) = '11' OR
WK_FKDAT+4(2) = '12'.
WK_DATE10(4) = WK_FKDAT0(4).
WK_DATE1+4(2) = '04'.
WK_DATE1+6(2) = '01'.
ELSEIF
WK_FKDAT+4(2) = '01' OR
WK_FKDAT+4(2) = '02' OR
WK_FKDAT+4(2) = '03'.
WK_FISYEAR = WK_FKDAT+0(4).
WK_FISYEAR = WK_FISYEAR - 1.
WK_CHAR_YEAR = WK_FISYEAR.
CONDENSE WK_CHAR_YEAR NO-GAPS.
WK_DATE1+0(4) = WK_CHAR_YEAR.
WK_DATE1+4(2) = '04'.
WK_DATE1+6(2) = '01'.
ELSE.
ENDIF.
nidhi
SELECT LIFNR ADRNR FROM LFA1 INTO TABLE IT_LFA1 WHERE LIFNR =
WK_ZMMT01-LIFNR.
SELECT ADDRNUMBER SMTP_ADDR FROM ADR6 INTO TABLE IT_ADR6 FOR
ALL ENTRIES IN IT_LFA1 WHERE ADDRNUMBER = IT_LFA1-ADRNR.
SELECT SINGLE * FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
WHERE MANDT = SY-MANDT AND
WERKS = WK_WERKS AND
LIFNR = WK_LIFNR AND
BILLNO = WK_VBELN AND
BILLDATE GE WK_DATE1.
IF SY-SUBRC EQ 0.
MESSAGE E003 WITH TEXT-006.
ENDIF.
CLEAR IT_ZMMT02.
REFRESH IT_ZMMT02.
LOOP AT IT_TEMP_TC1.
IT_ZMMT02-MANDT = SY-MANDT.
IT_ZMMT02-SERIAL = WK_SNO.
IT_ZMMT02-WERKS = WK_WERKS.
IT_ZMMT02-EBELN = WK_EBELN.
IT_ZMMT02-ITEMCODE = IT_TEMP_TC1-ITEMCODE.
IT_ZMMT02-DESCRIPTION = IT_TEMP_TC1-ITEMNAME.
IT_ZMMT02-QUANTITY = IT_TEMP_TC1-QUANTITY.
IT_ZMMT02-EXCISE = IT_TEMP_TC1-EXCISE.
APPEND IT_ZMMT02.
CLEAR IT_ZMMT02.
ENDLOOP.
IF IT_ZMMT02[] IS INITIAL.
MESSAGE E003 WITH TEXT-007.
ENDIF.
IF SY-UNAME = 'GATE1010' AND WK_WERKS NE '1010'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1020' AND WK_WERKS NE '1020'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1030' AND WK_WERKS NE '1030'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1040' AND WK_WERKS NE '1040'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1050' AND WK_WERKS NE '1050'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1060' AND WK_WERKS NE '1060'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'ABAP' AND WK_WERKS NE 'ABAP'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1070' AND WK_WERKS NE '1070'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1080' AND WK_WERKS NE '1080'.
MESSAGE E003 WITH TEXT-008.
ENDIF.
INSERT ZMMT001_GRN_GATE FROM WK_ZMMT01.
INSERT ZMMT002_GRN_ITEM FROM TABLE IT_ZMMT02.
IF SY-SUBRC EQ 0.
COMMIT WORK.
MESSAGE I002 WITH WK_SNO.
********nidhi*******************************************************
CALL SCREEN 1001.
CLEAR WK_LIFNR.
CLEAR WK_EBELN.
CLEAR WK_NAME.
CLEAR WK_SCHNO.
CLEAR WK_CHALNO.
CLEAR WK_CHALDATE.
CLEAR WK_VBELN.
CLEAR WK_FKDAT.
CLEAR WK_GRNO.
CLEAR WK_GRDATE.
CLEAR WK_VEHICLE.
CLEAR WK_CARRIER.
CLEAR WK_FREIGHT.
CLEAR WK_MDOC.
CLEAR WK_DEPT.
CLEAR WK_MODE.
CLEAR WK_BASIC.
CLEAR WK_EXCISE.
CLEAR WK_TAX.
CLEAR WK_APPVAL.
CLEAR WK_CHAL.
CLEAR WK_FORM38.
REFRESH IT_TEMP_TC1.
CLEAR WK_FISYEAR.
CLEAR WK_DATE1.
CLEAR WK_CHAR_YEAR.
CALL TRANSACTION 'ZMMI001'.
ELSE.
ROLLBACK WORK.
MESSAGE E003 WITH TEXT-006.
ENDIF.
ENDIF.
ELSE.
MESSAGE E009 WITH TEXT-014.
ENDIF.
WHEN 'WK_EXIT'.
WHEN 'WK_CLEAR'.
CLEAR WK_LIFNR.
CLEAR WK_EBELN.
CLEAR WK_NAME.
CLEAR WK_SCHNO.
CLEAR WK_CHALNO.
CLEAR WK_CHALDATE.
CLEAR WK_VBELN.
CLEAR WK_FKDAT.
CLEAR WK_GRNO.
CLEAR WK_GRDATE.
CLEAR WK_VEHICLE.
CLEAR WK_CARRIER.
CLEAR WK_FREIGHT.
CLEAR WK_MDOC.
CLEAR WK_DEPT.
CLEAR WK_MODE.
CLEAR WK_BASIC.
CLEAR WK_EXCISE.
CLEAR WK_TAX.
CLEAR WK_APPVAL.
CLEAR WK_CHAL.
CLEAR WK_FORM38.
REFRESH IT_TEMP_TC1 .
CLEAR WK_FISYEAR.
CLEAR WK_DATE1.
CLEAR WK_CHAR_YEAR.
WHEN 'DELETE'.
DELETE IT_TEMP_TC1 WHERE SEL = 'X'.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD
*& Module STATUS_1000 OUTPUT
text
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'GRN'.
SET TITLEBAR 'GRN'.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'IT_TC1-ITEMCODE'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'WK_EBELN'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'WK_LIFNR'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
LOOP AT SCREEN.
IF SCREEN-NAME NE 'WK_COMMENT'.
SCREEN-INPUT = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
LOOP AT SCREEN.
IF SCREEN-NAME = 'WK_SNO' OR
SCREEN-NAME = 'SNO' OR
SCREEN-NAME = 'WK_COMMENT' .
SCREEN-INVISIBLE = 1.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
SCREEN-OUTPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
IF WK_LIFNR IS INITIAL.
SET CURSOR FIELD 'WK_LIFNR'.
ELSEIF WK_EBELN IS INITIAL.
SET CURSOR FIELD 'WK_EBELN'.
ELSEIF WK_VBELN IS INITIAL.
SET CURSOR FIELD 'WK_VBELN'.
ELSEIF WK_FKDAT IS INITIAL.
SET CURSOR FIELD 'WK_FKDAT'.
ENDIF.
ELSE.
IF NOT WK_SNO IS INITIAL.
IF SY-UNAME = 'STORE1010'.
WK_WERKS = '1010'.
ELSEIF SY-UNAME = 'STORE1020'.
WK_WERKS = '1020'.
ELSEIF SY-UNAME = 'STORE1030'.
WK_WERKS = '1030'.
ELSEIF SY-UNAME = 'STORE1040'.
WK_WERKS = '1040'.
ELSEIF SY-UNAME = 'STORE1050'.
WK_WERKS = '1050'.
ELSEIF SY-UNAME = 'STORE1060'.
WK_WERKS = '1060'.
ELSEIF SY-UNAME = 'STORE1070'.
WK_WERKS = '1070'.
ELSEIF SY-UNAME = 'STORE1080'.
WK_WERKS = '1080'.
ENDIF.
SELECT SINGLE * FROM ZMMT001_GRN_GATE INTO WK_ZMMT01
WHERE SERIAL = WK_SNO AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
WK_WERKS = WK_ZMMT01-WERKS.
WK_EBELN = WK_ZMMT01-EBELN.
WK_LIFNR = WK_ZMMT01-LIFNR.
WK_CHALNO = WK_ZMMT01-CHALNO.
WK_CHALDATE = WK_ZMMT01-CHALDATE.
WK_VBELN = WK_ZMMT01-BILLNO.
WK_FKDAT = WK_ZMMT01-BILLDATE.
WK_GRNO = WK_ZMMT01-GRNUMBER.
WK_GRDATE = WK_ZMMT01-GRDATE.
WK_VEHICLE = WK_ZMMT01-VEHICLE.
WK_CARRIER = WK_ZMMT01-CARRIER.
WK_FREIGHT = WK_ZMMT01-FREIGHT.
WK_MDOC = WK_ZMMT01-MDOC.
WK_DEPT = WK_ZMMT01-DEPT.
WK_MODE = WK_ZMMT01-PAYMODE.
WK_BASIC = WK_ZMMT01-BASIC.
WK_EXCISE = WK_ZMMT01-EXCISE.
WK_TAX = WK_ZMMT01-TAXAMT.
WK_APPVAL = WK_ZMMT01-APPVAL.
WK_CHAL = WK_ZMMT01-CHALINV.
WK_FORM38 = WK_ZMMT01-FORM38.
WK_COMMENT = WK_ZMMT01-COMMENTS.
SELECT * FROM ZMMT002_GRN_ITEM INTO TABLE IT_ZMMT02
WHERE SERIAL = WK_SNO AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
CLEAR IT_TEMP_TC1.
REFRESH IT_TEMP_TC1.
LOOP AT IT_ZMMT02.
IT_TEMP_TC1-SNO = SY-TABIX.
IT_TEMP_TC1-ITEMCODE = IT_ZMMT02-ITEMCODE.
IT_TEMP_TC1-ITEMNAME = IT_ZMMT02-DESCRIPTION.
IT_TEMP_TC1-QUANTITY = IT_ZMMT02-QUANTITY.
APPEND IT_TEMP_TC1.
CLEAR IT_TEMP_TC1.
ENDLOOP.
ENDIF.
ENDIF.
LOOP AT SCREEN.
IF ( SCREEN-NAME NE 'WK_SNO' ) AND
( SCREEN-NAME NE 'WK_SAVE' ) AND
( SCREEN-NAME NE 'WK_CLEAR' ) AND
( SCREEN-NAME NE 'WK_EXIT' ).
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
LOOP AT TC1-COLS INTO COLS WHERE INDEX GT 0.
COLS-SCREEN-INPUT = '0'.
MODIFY TC1-COLS FROM COLS INDEX SY-TABIX.
ENDLOOP.
ENDIF.
ENDIF.
WK_DATE = SY-DATUM.
WK_TIME = SY-UZEIT.
TC1-LINES = 20.
ENDMODULE. " STATUS_1000 OUTPUT
*& Module EXIT_1000 INPUT
text
MODULE EXIT_1000 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT' OR 'WK_EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " EXIT_1000 INPUT
*& Module ITEM_CODE INPUT
text
MODULE ITEM_CODE INPUT.
REFRESH : VALUES_TAB.
CLEAR : VALUES_TAB.
IF ( SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1010' OR
SY-UNAME = 'GATE1030' OR
SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR
SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR
SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR
SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR
SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR
SY-UNAME = 'STORE1010' OR
SY-UNAME = 'ABAP' ).
SELECT * FROM EKKO CLIENT SPECIFIED
INTO TABLE IT_EKKO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKKO INDEX 1.
WK_BSTYP = IT_EKKO-BSTYP.
WK_BSART = IT_EKKO-BSART.
ENDIF.
if wk_bsart = 'ZLR'.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
SORT IT_EKPO BY EBELN EBELP.
IF WK_BSTYP = 'L' AND WK_BSART = 'ZLR'.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
SORT IT_EKET BY EBELN EBELP ETENR.
LOOP AT IT_EKPO.
CLEAR WK_DIFF_QTY.
LOOP AT IT_EKET WHERE EBELN = IT_EKPO-EBELN
AND EBELP = IT_EKPO-EBELP
AND EINDT LE SY-DATUM.
WK_DIFF_QTY = WK_DIFF_QTY + IT_EKET-MENGE - IT_EKET-WEMNG.
ENDLOOP.
IF WK_DIFF_QTY GT 0.
VALUES_TAB-TXZ01 = IT_EKPO-TXZ01.
VALUES_TAB-MENGE = WK_DIFF_QTY.
VALUES_TAB-MATNR = IT_EKPO-MATNR.
APPEND VALUES_TAB.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF WK_BSTYP = 'F'.
SELECT mseg~mblnr
mseg~mjahr
mseg~zeile
mseg~bwart
mseg~matnr
mseg~ebeln
mseg~ebelp
mkpf~budat
mseg~menge INTO TABLE it_mseg
FROM mkpf INNER JOIN mseg
ON mkpfmblnr EQ msegmblnr
AND mkpfmjahr EQ msegmjahr
FOR ALL entries IN it_ekpo
WHERE bwart IN ('101','122','102')
AND werks = it_ekpo-werks
AND ebeln = it_ekpo-ebeln
AND ebelp = it_ekpo-ebelp.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET
WHERE MANDT = SY-MANDT AND
EBELN = IT_EKPO-EBELN.
LOOP AT IT_EKPO.
CLEAR : WK_DIFF_QTY.
wk_101_qty,
wk_102_qty,
wk_122_qty.
LOOP AT it_mseg WHERE ebeln = it_ekpo-ebeln AND
ebelp = it_ekpo-ebelp.
IF it_mseg-bwart = '101'.
wk_101_qty = wk_101_qty + it_mseg-menge.
ENDIF.
IF it_mseg-bwart = '102'.
wk_102_qty = wk_102_qty + it_mseg-menge.
ENDIF.
IF it_mseg-bwart = '122'.
wk_122_qty = wk_122_qty + it_mseg-menge.
ENDIF.
ENDLOOP.
if not it_mseg[] is initial.
wk_diff_qty = it_ekpo-menge - wk_101_qty
- wk_102_qty - wk_122_qty.
else.
wk_diff_qty = it_ekpo-menge.
endif.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP.
IF SY-SUBRC EQ 0.
WK_DIFF_QTY = IT_EKPO-MENGE - IT_EKET-WEMNG.
ENDIF.
IF wk_diff_qty LE it_ekpo-menge.
IF WK_DIFF_QTY GT 0.
VALUES_TAB-TXZ01 = IT_EKPO-TXZ01.
VALUES_TAB-MENGE = WK_DIFF_QTY.
VALUES_TAB-MATNR = IT_EKPO-MATNR.
APPEND VALUES_TAB.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
SELECT TXZ01
MATNR FROM EKPO CLIENT SPECIFIED
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
ENDIF.
ELSE.
SELECT TXZ01
MATNR FROM EKPO CLIENT SPECIFIED
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
ENDIF.
SORT VALUES_TAB BY TXZ01.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'IT_TC1-ITEMCODE'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'IT_TC1-ITEMCODE'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB
RETURN_TAB = RETURN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*BREAK-POINT.
IF SY-SUBRC = 0.
READ TABLE RETURN_TAB INDEX 1.
SELECT SINGLE MAKTX FROM MAKT CLIENT SPECIFIED
INTO WK_MAKTX WHERE
MANDT = SY-MANDT AND
MATNR = RETURN_TAB-FIELDVAL AND SPRAS = SY-LANGU.
ENDIF.
ENDMODULE. " ITEM_CODE INPUT
*& Module CHECK_INPUT INPUT
text
MODULE CHECK_INPUT INPUT.
CLEAR : EKKO-EBELN , EKKO-LIFNR.
SELECT SINGLE EBELN LIFNR FROM EKKO CLIENT SPECIFIED
INTO (EKKO-EBELN , EKKO-LIFNR ) WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC NE 0 AND ( SY-UNAME = 'GATE1010' OR
SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR
SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR
SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR
SY-UNAME = 'GATE1080' OR SY-UNAME = 'ABAP' ).
IF WK_EBELN NE SPACE.
MESSAGE E003 WITH TEXT-001.
ENDIF.
ELSE.
WK_LIFNR = EKKO-LIFNR.
CLEAR : LFA1-NAME1.
SELECT SINGLE NAME1 FROM LFA1 CLIENT SPECIFIED
INTO LFA1-NAME1 WHERE
MANDT = SY-MANDT AND
LIFNR = WK_LIFNR.
IF SY-SUBRC EQ 0.
WK_NAME = LFA1-NAME1.
ENDIF.
ENDIF.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
IF wk_vbeln IS INITIAL.
set cursor field wk_vbeln.
MESSAGE E003 WITH text-009.
ENDIF.
IF wk_fkdat IS INITIAL.
MESSAGE E003 WITH text-010.
ENDIF.
ENDIF.
IF ( SY-UNAME = 'STORE1010' OR SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR SY-UNAME = 'STORE1080' ).
CLEAR : ZMMT001_GRN_GATE.
SELECT SINGLE EBELN CDATE FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
INTO (ZMMT001_GRN_GATE-EBELN ,
ZMMT001_GRN_GATE-CDATE )
WHERE MANDT = SY-MANDT AND
SERIAL = WK_SNO AND WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
SELECT MBLNR
MJAHR
BUDAT
BKTXT FROM MKPF CLIENT SPECIFIED
INTO TABLE IT_TEMP_MKPF
WHERE MANDT = SY-MANDT AND
BUDAT = ZMMT001_GRN_GATE-CDATE
AND BKTXT = WK_SNO.
IFHi,
after calling you programm and get the message call transaction su53. That willl display the authorization that you need.
Hope this helps.
Regards
Bernd -
Inventory data load from Inventory Cube to another Copy Cube
Hello Experts,
I am trying to load Inventory data from the Inventory cube(say YCINV) to a copy cube say YCOPY_CINV(copy of Inventory cube), but the results appear inconsistant when I compare the reports on these 2 cubes. I am trying to populate a fiield in copy cube so that I can populate the same data back to the original cube with the new field in it, I am doing this reload back and forth for historical data purpose only.
I have seen lot of posts as how to run the setups for Inventory data, but my case does not need to perform set up runs.
Does the note 1426533 solve the issue of loading from one cube to another ? we are on SAP BI 7.01 with SP 06 ,but the note specifies SP 07 ?
I have tried note 375098 to see if it works, but I do not see the options as mentioned from step "Using DTP (BW 7.x)" in BI to perform this note
Please advise on whether to go with implementing note 1426533 or is there any other way to load inventory data from one cube to other.
Regards,
JBHi Luis,
Thanks for your reply,
I do not see any setting like Intial stock in DTP except "initial non-cumulative for non- cumulative". I did try using the option "initial non-cumulative for non- cumulative" ,but the results still do not match with the inventory cube data.I do not see the check box for marker in the copy cube (under roll up tab). Please let me know if we can really implement this solution ,i.e. copying from inventory cube to copy cube and then re-loading it back to inventory cube for historical data. Currenlty, I am comparing the queries on these 2 cubes, if the data matches then I can go ahead and implement it in Production, other wise it would not be wise to do so .
Regards,
JB -
Weblogs: Cycle Count Inventory Date: From IM inventory date to WM inventory
Dear All,
I have updated new weblog on the common problem for physical inventory.
When any organization plans to go for implementing the warehouse management; it has major concern about the physical inventory process, particularly last physical inventory date.
More details are available on this weblogs:
/people/community.user/blog/2007/10/04/cycle-count-inventory-date-from-im-inventory-date-to-wm-inventory-date
<b>Your feedback/comments are most welcome, <u>Please write on the weblog page, not in this thread.</u></b>
Regards
Arif MansuriDear All,
Here is my previous weblog, Your comments will work as tonic for me ), so leave your comment on both of these blogs.
/people/community.user/blog/2007/05/04/physical-inventory-in-material-management
Enjoy SAP..
Regads
Arif Mansuri -
Process keys maintenance for Inventory data
Hi,
Can any one suggets the Procedure for to maintain the Process keys at the time of extracting Inventory data from Ecc6.0 to BI 7.0.
Thanks,
Chandra GHi Reddy,
first of all thanks for your quik Response.
BI consultant need to maintain the process key(transaction keys) or MM consultant. when i see that path, already some transaction keys are maintaining for MM there like
aplication component application operat Description
MM 02 1 Purchase order/vendor
MM 02 2 Goods Receipt
MM 02 3 Invoice/Vendor
is we need to do any other New Entries or Settings
Regards,
chandra G -
Need documents related to inventory data sources
Hi all,
just need a favor from u guysu2026.i need documents related to inventory data sources (complete step by step)u2026we need to extract inventory data sources from R/3 and need to replicate them in a brand new BW systemu2026Iu2019ll appreciate anything that u people have gotu2026and share with me.
Regards,
KSHi
check this thread
it might be helpful
doubt related to inventory data loading
Inventory doubt
regards
gaurav -
Prob creating a new structured data type
I am trying to create a new structured data type to see it in data type diagram. When i try to right click on structured data type in DATA TYPES, i cant see any option like new structured data type etc. But this is working for distinct as well collection data types but not for structured.
By default, we are getting SDO_geometry structured data type for every model. We can change its name but cant create a new structured data type from there also.
What should i do to create a structured data type in data modeler.The right click on Structured Types does not open a menu on my Data Modeler either.
To create a Structured Type, click View on the main menu for the Data Modeler. Then click View Details -> Datatype.
In the Browser (called Navigator in other Oracle products), right click Datatype Model -> Show. This will show the DataTypes diagrammer.
Click on the New Structured Type button on the menu bar, then click anywhere on the DataTypes diagrammer, the Structured Type Properties window opens.
Enter all the details in the Structured Type Properties window to create your data type. Click Ok when finished. Your object type will be represented by a "blue" box on the diagram.
Jim Keese
Edited by: user9367840 on Feb 10, 2012 8:30 AM -
Hi All,
I am new to BI and I have dought about inventory data loads u201Ccan I load BF data source with out loading BX data source and compress with marker update? Yes or NO; if yes justify reasons.
Regards,
KrishHi,
Read the document "How to handle Inventory Management Scenarios in BW (NW2004)" at http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328?quicklink=index&overridelayout=true
This will clear all your doubts.
Maybe you are looking for
-
TS3048 Bluetooth and USB ports aren't working can't connect mouse or keyboard.
Bluetooth and USB ports aren't working, so am unable to use Imac past turning it on. There's no way to connect mouse or keyboard, it started right after a software update for Maverick (OS X bash Update 1.0 – OS X Mavericks), bluetooth symbol not show
-
Error while loading data from Flat file???
Hi If in flat file say i have country code as 0190.i have extracted the data to data targets but in the data targets the country code is displayed as 190.how can i rectify this error.I have used Alpha conversion but still i have this problem?? Points
-
Hi, i have my iMac from 2008 and it's always work but for almost the lasy year youtube doesn't work. That's wasn't a problem but. right by now, everytime i tried to watch a video the mac start to freeze and i must close all the application which are
-
Is it possible to retrieve deleted files from the cloud i.e. contact list?
Is it possible to retrieve deleted files from the cloud i.e. contacts?
-
I have tried installing Vista, and run into several problems: 1 - keyboard is not working - when booting could not "Press any key to boot from CD/DVD". I had to use an external USB keyboard. I know it happened (once or twice) in my old XP installatio