Refreshed universe and now reports are not working
I added Restricked key figures and calculated key figures and I when I run my webi report I get this error message:
Query 1 - Maintenance Orders Maintenance Plan and Actual - Regular Hours
A database error occured. The database error text is: The MDX query SELECT { Measures.4IDV96Q35XYNK4WT6ECMO487E, Measures.4IDV96IEMZCY1IDD0KAAE29HM, Measures.4IDV96XROWKD2RG9C8EYY66X6 } ON COLUMNS , NON EMPTY CROSSJOIN( 0COORD_TYPE.LEVEL01.MEMBERS, 0PMPLANGRP.LEVEL01.MEMBERS ) DIMENSION PROPERTIES 0COORD_TYPE.20COORD_TYPE, 0PMPLANGRP.20PMPLANGRP ON ROWS FROM ZPM_M04/ZPM_M04_REGULARHOURS SAP VARIABLES !V000002 INCLUDING 0BUS_AREA.75 !V000001 INCLUDING 0MAINTPLANT.7500 !V000010 INCLUDING 1/1/2007 12:00:00 AM : 7/6/2010 12:00:00 AM failed to execute with the error Unknown error. (WIS 10901)
I see the universe in the query pane and I am and I see LOV and run query button.
What do I have to do in the universe to get this fixed
Thanks for your help
Mike
1 ZCM Primary server, 8 Satellite servers
ZCM version 11.2.1, Running on SLES 11 sp1
Currently working with a customer that wishes to move their...
Similar Messages
-
"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.
Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari -
A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distressIf she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up. -
The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.
Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
-
Oracle 9iAS R2 - reports are not working - JSP Error
dear All
We are having issue in our Oracle 9i AS R2, the reports are not working, this thing happend suddenly , while runing any report the following messages are coming
==============
500 Internal Server Error
OracleJSP:
JSP Error:
Request URI:/repdemo/examples/Tools/test.jsp
Exception:
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
at oracle.reports.definition.RWReport.done(RWReport.java:1087)
at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
at examples.tools._test._jspService(_test.java:292)
[SRC:/examples/Tools/test.jsp]
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
-=================
please help to resolve this issue.
thanks in advance.
regardsDear All
Just to share the solution of the problem.
We restarted the XServer which is on the other machine then Oracle 9i AS Middle Tiere and Infra. Once we restarted the XServer machine, and restarted the reports server , every thing back to normal.
regards -
"backspace", "g" and "h" keys are not working.
hello,
my laptop is HP 450 and windows 7.it is one years old. i haven't spilled anyting on it or damaed it in anyway i can think of.
suddenly the "backspace" , "g" and " h " keys are not working.
please help me, because i have to complete my university assignment as soon as possible.
tank you,
sheharaHi,
While this could be a hardware issue, it's always worth trying the following.
Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
Shutdown the notebook.
Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Just installed Office 2011 on my MacBook Pro Retina and now Safari does not work
Just installed Micro Office 2011 on my 13" MacBook Retina and now Safari is not working correctly. Pages load very slowly or not at all.
Any idea of what's wrong?
ThanksPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
my iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!
Sea water and electronics don't mix. The salinity fries the internal circuitry of the phone. Your phone is toast.
Certainly the user of any device which can be lost, stolen, or dropped in the sea would be smart enough to have had the data backed up, rght? Your photos and numbers should be safely backed up on your computer or in the cloud.
If you didn't do this, there's no way to recover those data now. Backups are meant to be done BEFORE disaster strikes, not after. -
i purchased bad boys 1 and 2 from the i tunes store but they would not play so i restarted my laptop and now they are not even on my itunes
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete the songs and redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to delete video from iTunes library? del and shift+del are not working - no any reaction
how to delete video from iTunes library? del and shift+del are not working - no any reaction.
seb963 wrote:
Hi
Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library. -
Mouse fell to the floor and now it is not working
I dropped my mouse on the floor and now it does not work.
Try reinstalling the batteries, maybe they got dislodged. Other than that buy a new mouse, yours is broken.
-
I dropped my phone in the water and now it is not working. Any suggestions?
I dropped my iphone in the water and now it is not working. Any suggestions?
Turn it off and put it in a bag of rice for 5-7 days. You may get lucky.
-
prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
Problem with variable in scheduled job
I'm trying to get the following scheduled job to run: switch(config)# scheduler job name backup_job switch(config-job)# cli var name timestamp $(TIMESTAMP) ; copy running-config bootflash:/$(SWITCHNAME)-cfg.$(timestamp) ; copy bootflash:/$(SWITCHNAME
-
Got a new hard drive installed and since then, I cannot get purchased song into my itunes. It is telling me that my write access or permission are wrong. I have changed all and nothing works. HELP!!!!!!
-
Itunes 10.4 - Smartlist & interlacing critierias
Hi, I miss the 3rd button (the one with dots :-) in the smartlist window for interlacing the different criterias after installing Lion and iTunes 10.4???? I installed iTunes 10.4 64-bit on a pc with windows 7 and it doesn't creates the same bug(?). H
-
Hi how can i know if receiver XI adapter touch inbound EJB by registering url? my scenario is ABAP Proxy to Java proxy Sync. i can see mapping error on moni because payload inbound adapter has empty , my issue, XI seems not to call inbound EJB? on ad
-
It's not allowing me to update my phone to ios
it keeps saying timed out and blah blah blah. this **** is getting old