Refreshing ALV contents

Hi all..
I have a few input fields and a button....based on the input provided i display the data in an ALV table.
Now i navigate the next view and create a new entry and save it.
until i click on the button again im not able to see that new entry in the ALV.
What i want is when i come back to the previous screen  that newly created entry to be shown in the ALV..
Can anyone help me out with this..
Thank you.
Radhika .

Hi,
    Once the new entry is appended to the itab and binding back to the node is done on the second view and when u come back to the first view, that changed itab will be automatically display on the alv. u dont have to do any thing for that
Regards
Sarath
Message was edited by:
        sarath satheesan

Similar Messages

  • Refresh alv list display

    Hi,
    how to refresh an ALV LIST display?
    Thanks.

    Hi,
    Content and Structure Change
    Use
    You are able to change the internal data table in various ways. Depending on which type of change you use, you  have to proceed differently to make the change visible on the front end in the ALV output as well.
    You are able to make the following changes:
    ·        You change content or the sequence of the individual data records
    Afterwards you need to refresh the ALV output
    ·        You replace the entire data table
    Refresh Display of the ALV Output
    If you have changed single values, added rows or deleted rows in the data table of list-type ALV outputs, you need to complete these changes in the ALV output as well by refreshing the ALV display.
    For Changes in the Tree Structure you do not have to refresh the display. In the other ALV tools, you do not have to refresh the ALV output when you make the following changes:
    §         Changes to the Display of Columns
    §         Changes Sequence of Columns in the ALV display
    §         Changes to the DDIC Reference of Columns
    By default, the ALV output automatically scrolls to the beginning. However, you are able to determine that the current display (position on the screen) not be changed.
    You are able to refresh the ALV output in two ways:
    ·        All settings for filters and sorting remain.
    This setting can lead to newly inserted data records not being displayed because the filter setting hid exactly these data records.
    ·        All settings for filters and sorting remain.
    Features
    For changes to content and structure, you are able to make the following settings:
    ·        Refresh ALV output
    ·        Swap the data table of the ALV output
    Refresh ALV output
    With the refresh, you ensure that the changed values are available on the front end as well.
    Display type
    ALV Tool
    Classic ABAP list
    Full screen
    In the Container
    Simple, two-dimensional table
    Yes
    Yes
    Yes
    Hierarchical-sequential list
    Yes
    Tree structure
    No
    No
    Methods
    Function
    Class
    Method
    Refresh ALV output without deleting filter and sort settings
    CL_SALV_TABLE
    CL_SALV_HIERSEQ_TABLE
    REFRESH
    (Parameter REFRESH_MODE: SOFT)
    Refresh ALV output and delete filter and sort settings
    REFRESH
    (Parameter REFRESH_MODE: FULL)
    Change the Structure of the Data Table with SET_DATA
    Depending on which ALV tool you are using, the parameters of the SET_DATA method are different:
    If you assign a new structure with SET_DATA, all objects that referred to the previous structure will be deleted such as all sort objects in list-type ALV outputs or all node objects in tree structures.
    Methods
    Function
    Class
    Method
    Change structure and data table
    CL_SALV_TABLE
    CL_SALV_HIERSEQ_TABLE
    CL_SALV_TREE
    CL_SALV_HIERSEQ_LEVEL
    SET_DATA
    Change the Structure of the Data Table with the SET_DATA Method
    ALV Tool
    Parameter
    Remarks
    Simple, two-dimensional table
    T_TABLE
    Table for structure and contents of the ALV output
    Hierarchical-sequential list
    (in CL_SALV_HIERSEQ_TABLE)
    LEVEL
    Hierarchy level whose structure you wish to change
    T_TABLE
    New table of hierarchy level
    T_BINDING
    List of up to five foreign-key relationships
    (in CL_SALV_HIERSEQ_LEVEL)
    VALUE
    New table of hierarchy level
    T_BINDING
    List of up to five foreign-key relationships
    Tree structure
    T_TABLE
    Initial table
    Empty table, only sets the structure

  • Autorefresh ALV contents

    Hi All,
    I have 3 components
    In POWL_UI_COMP i have a few Link to URLS.In one of its view I have an event handler method 'On_Query_switch' assigned to the event "QUERY_SWITCH" which is triggered when a user clicks on any of the above linktoUrls
    I have two other Components POWL_TABLE_COMP and POWL_DETAIL_COMP_IF.
    POWL_DETAIL_COMP_IF has an event DO_REFRESH in its interface controller.
    POWL_TABLE_COMP has an event handler ON_DETAILS_REFRESH assigned to the event 'DO_REFRESH'
    I want to autorefresh the ALV contents when user clicks on the linktourls
    I tried - firing the 'DO_Refresh' event  in the method 'On_Query_Switch' by defining component usage of POWL_DETAIL_COMP_IF in POWL_UI_COMP
    But after adding usage i do not get any method like Fire_DO_refresh_Evt as we normally do using the code wizard.
    I also tried setting e_do_refresh in the handle_action method of IF_POWL_FEEDER but i dont have the requied parameters for this method.
    Or can use a certain parameter in POWL_UI_COMP which i can set in the method On_Query_Switch and access it in POWL_TABLE_COMP.
    Or is there any other way i can achieve this ?
    Please Help!
    ~Veena.

    Hello Veena,
    One way to refresh the POWL is to embed the POWL in to another webdynpro component. In the WebDynpro component declare the POWL_UI_COMP as used compoent, create a view and create ViewcontainerUIelement. In WINDOWS attach the POWL_UI_COMP components view in the view container. In the init method of the view trigger outbound plug with all the parameters to POWL_UI_COMP.
    In the view capture the event QUERY_SWITCH or implement a method to the event. In the call the outbound plug again (outbound plug with all the parameters to POWL_UI_COMP) with refreshq = 'X'  so it will refresh the POWL.
    Best regards,
    Suresh

  • Podcasts app not refreshing new content?

    Hi, my podcasts app is not refreshing new content for last 4 days, is anyone else facing the same issue?

    Hello there, ikgandhi.
    The following Knowledge Base article offers up some great steps to review for issues with the Podcasts app for iOS:
    Podcasts app for iOS: Managing subscriptions
    http://support.apple.com/kb/HT6190
    Default settings: From your Home screen, tap Settings and then Podcasts. These settings are shared by all of your podcast subscriptions. These are known as default podcast settings.
    Refresh Every: You can choose how often your iOS device checks for new episodes to your subscriptions. It's set to check every six hours by default.
    Limit Episodes: You can pick how many episodes you see for subscriptions.
    Download Episodes: The latest episodes of your podcasts will download automatically if your iOS device is connected to Wi-Fi.
    Delete Played Episodes: If this is turned on, episodes will delete 24 hours after you finish playing them.
    Use Cellular Data: If your iOS device has a cellular connection, you can allow downloads to use cellular data when Wi-Fi isn't available. This is off by default. Downloads using cellular data are limited to 100MB per episode. If an episode is larger than that, it won't start downloading until you're connected to Wi-Fi.
    Podcast-specific settings: The second place you'll find subscription settings is within the Podcasts app. Tap a podcast subscription under My Podcasts and pull down with one finger to reveal the settings buttons. These settings are unique to each subscription. If you don't change anything here, the podcast subscription will just use the default settings. If you do make changes to a specific subscription’s settings, they'll only apply to that podcast.
    Play: This setting lets you change the order in which a subscription plays. If you're listening to a news style podcast, you may want to set this to play the new episodes first. If the series is more episodic, you may prefer to play oldest to newest.
    Sort Order: This changes the sort order of episodes that appear for a podcast (not its playback order).
    Subscribed: When this is on, new episodes of this podcast will be marked as unplayed as they become available.
    Refresh Every: You can choose how often your iOS device checks for new episodes to your subscriptions. It's set to check every six hours by default.
    Limit Episodes: You can pick how many episodes you see for subscriptions.
    Download Episodes: The latest episodes of your podcasts will download automatically.
    Delete Played Episodes: If this is on, episodes will be deleted 24 hours after you finish playing them unless you've marked them as Saved.
    Inactive subscriptions
    If you do not play or access a subscription within 15 days, your subscription to that podcast will go inactive and you will no longer receive updates to it. As soon as you access the subscription again it will refresh. 
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Error in Cache Refresh(Unable to refresh cache contents)

    Hi All,
    When i am refreshing Cache from the browser using link CPACache/refresh?mode=full it says success.
    When i do from SXI_CACHE it gives an error.
       Error during last attempt to refresh cache
       Unable to refresh cache contents
    So when i run any schenario in message monitoring i get the following error-
    <i>SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="XICACHE">UPDATE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>http response does not contain a valid XML root tag</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error></i>
    I checked the INTEGRATION_DIRECTORY_HMI connection...
    here the response which im getting is..
    <i> HEADER NAME                HEADER VALUE
    response_line               HTTP/1.0 200
    server_protocol             HTTP/1.0
    status_code                 200
    status_reason
    ragma                       no-cache
    ache-control                no-cache
    ontent-type                 text/html
    ontent-length               87
    HTTP BODY
    TITLE>Error</TITLE>#<BODY>#<H1>Error</H1>#FW-1 at nebula: Unknown WWW s
    rver.</BODY>##
    Time (ms)                                 17</i>
    I believe that is not the right response.
    Everything was working fine yesterday when all of a sudden this error cropped up from no where.
    Regards,
    Rahul

    Hi,
    This is the error it shows there..
    <b>ERROR ID</b>      <i>UPDATE</i>
    <i>http response does not contain a valid XML root tag</i>
    Regards,
    Rahul

  • REFRESH ALV

    HI
    I WANT TO REFREAH ALV AFTER I PRES ON BUTTON.
    WHEN I USE REUSE_ALV_GRID_DISPLAY
    IN USER-COMMAND I USE
    FORM USER_COMMAND USING P_UCOMM TYPE SYUCOMM
                            P_SELFIELD TYPE SLIS_SELFIELD.
    P_SELFIELD-REFRESH = 'X'
    how can i refresh when i use class
    CL_SALV_TABLE?
    thanks
    have nice day

    hi yossi,
    check these links..
    Refresh in ALV.
    Alv Grid and Refresh Button
    ALV grid Refresh.
    http://www.sap-img.com/abap/how-to-refresh-alv-list-grid-once-it-is-displayed.htm
    http://sap.ittoolbox.com/groups/career/SAP-CAREER/refresh-alv-report-421919
    Re: Refresh ALV with a new value
    Re: Update/refresh ALV grid

  • Refreshing ALV when action is triggered using button

    Hello Friends,
    I have a drop down list having 3 values "Last 30 Days", "Last 60 Days" and "Last 90 Days". If I select Last 30 Days and click on button "Search" it gives me record for the last 30 days. But, if I click again on "Last 60 Days" it duplicates the record that was already in. So it does not refresh the previous result. I have added the code as below to refresh ALV but, it refresh the table but not the ALV. My View name is "MY PO INVOICES" and the context node name is 'MY_PO_INV' .
    DATA ln_node type REF TO if_wd_context_node.
    ln_node = wd_context->get_child_node( 'MY_PO_INV' ).
    ln_node->invalidate( ).
    Please let me know how do I refresth the result in the ALV display when I trigger the event.
    Thks & Rgds,
    Hemal

    Hello All,
    Thanks very much for your responses. I tried to bind the alv table. But, I think I am doing some thing wrong here. Below is my code. Please let me know where I am doing wrong. Appreciate your help.
    lv_thirtydays = 'LAST 30 DAYS'.
    lv_sixtydays = 'LAST 60 DAYS'.
    lv_ninetydays = 'LAST 90 DAYS'.
    if ZDAYS = lv_thirtydays.
          lv_zpostingdate = sy-datum - 30.
          ENDIF.
    lv_zpostingdate_to = sy-datum.
        if ZDAYS = lv_sixtydays.
           lv_zpostingdate = sy-datum - 60.
       ENDIF.
        if ZDAYS = lv_ninetydays.
           lv_zpostingdate = sy-datum - 90.
       ENDIF.
    ln_node = wd_context->get_child_node( 'MY_PO_INV' ).
    ln_node->invalidate( ).
    LOOP AT lt_context_value_set INTO cocd_context_value_set.
       lv_zcompany = cocd_context_value_set-text.
       lv_zusername = username.
       lv_zdays = ZDAYS.
       CALL FUNCTION 'ZEBP_MY_PO_INV_SEARCH'
       EXPORTING
        bldat =                          lv_zpostingdate
        bldat_to =                      lv_zpostingdate_to
        bukrs =                         lv_zcompany
        usnam =                       lv_zusername
        ZDAYS =                      lv_zdays
       tables
        invsrch        = zsearch.
    ln_node->bind_table( zsearch ) .
    SORT zsearch BY zcompany.
    DATA lo_nd_get_po_inv TYPE REF TO if_wd_context_node.
    lo_nd_get_po_inv = wd_context->get_child_node( name = wd_this->wdctx_my_po_inv ).
    CALL METHOD lo_nd_get_po_inv->bind_table
      EXPORTING
        new_items            = zsearch.
    ENDLOOP.
    Thks & Rgds,
    Hemal

  • SXI_CACHE Error:  Unable to refresh cache contents

    Hello everybody,
    in SXI_CACHE we get the error:
    "Unable to refresh cache contents"
    "Error during last attempt to refresh cache"
    and on double clicking we get the message:
    Error Id: Communication
    if_http_client receive http_communication_failure.
    Any suggestions.
    We can't afford to restart the machines every time.
    Regards Mario

    Mario,
    Please refer to the Trouble SHooting section of this guide,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
    Also, check the HTTP Connection INTEGRATION_DIRECTORY_HMI and try a test connection of this. It should return  HTTP Code : 500
    Regards
    Bhavesh

  • Refresh ALV list?

    Dear experts,
    I have used REUSE_ALV_GRID_DISPLAY to display some data of an internal table. I modified it and I need to display the refreshed data again.
    How can I do that?
    Thank you...
    Roxani

    Hi,
    In ALV, to refresh the table you have to call the method "refresh_table_display". 
    It has the syntax very similar to creating the table. 
    It has two parameters. In the first one, you can mention if you want to refresh only the data (the icons are not refreshed) 
    or 
    if you want to refresh only the icons around the grid (the data is not refreshed - this option is mostly not used in day to day applications).
    the synatx is :-
    <b>call method grid (name of grid )->refresh_table_display
    exporting
    IS_STABLE = <STRUCT OF TYPE LVC_S_STBL> (THIS IS FOR DATA REFRESHING)</b>
    <b>I_SOFT_REFRESH = <VARIABLE OF CHAR 01>  (THIS IS FOR ICON REFRESHING).</b>
    <b>Refresh grid display</b>
    Use the grid method REFRESH_TABLE_DISPLAY
    <b>Sample code:-</b>
    http://www.erpgenie.com/sap/abap/controls/alvgrid.htm#Refresh%20grid%20display
    TO refresh the ALV Lsit :
    http://www.sap-basis-abap.com/abap/auto-refresh-alv-list.htm
    Regards
    Sudheer

  • Refresh ALV ( Internal Table Will Be Change)

    Hi friends
    I am using 2 internal table. And they have their own field catalog. I can refresh alv grid.
    If my refresh data have stuation 1 I am using Inta another stuation I am using Intb.
    How can I refresh my ALV grid with different catalog and internal table?

    Hi,
    yes you can do that,
    Check this sample code, in your case you have to use two performs for display. with the help of SELFIELD-EXIT = 'X'. you can get what you want.
    REPORT  ZTEST_ALV.
    type-pools:slis.
    DATA: GT_SFLIGHT TYPE TABLE OF SFLIGHT.
    DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
          FIELDCAT type SLIS_FIELDCAT_ALV.
    data: l_layout type SLIS_LAYOUT_ALV.
    SELECT * FROM SFLIGHT INTO TABLE GT_SFLIGHT.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
      EXPORTING
        I_PROGRAM_NAME         = sy-repid
        I_STRUCTURE_NAME       = 'SFLIGHT'
        I_INCLNAME             = sy-repid
      CHANGING
        CT_FIELDCAT            = gt_fieldcat
      EXCEPTIONS
        INCONSISTENT_INTERFACE = 1
        PROGRAM_ERROR          = 2
        OTHERS                 = 3.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    perform alv_display.
    *&      Form  status
    *       text
    form status USING P_EXTAB TYPE SLIS_T_EXTAB  .
      set pf-status 'AAA' excluding p_extab.
    endform.                    "status
    *&      Form  USER_COMMAND
    *       text
    *      -->P_UCOMM    text
    *      -->P_SELFIELD text
    FORM USER_COMMAND USING    P_UCOMM    LIKE SY-UCOMM
          P_SELFIELD TYPE SLIS_SELFIELD.
      case p_ucomm.
        when 'TEST'.
            fieldcat-no_out = 'X'.
            modify gt_fieldcat from fieldcat
                   transporting no_out where fieldname = 'PRICE'.
    p_selfield-exit = 'X'.
    perform alv_display.
    endcase.
    ENDFORM.                    "USER_COMMAND
    *&      Form  alv_display
    *       text
    FORM alv_display .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        IS_LAYOUT                = l_layout
        I_CALLBACK_PROGRAM       = sy-repid
        I_STRUCTURE_NAME         = 'SFLIGHT'
        I_CALLBACK_PF_STATUS_SET = 'STATUS'
        I_CALLBACK_USER_COMMAND  = 'USER_COMMAND'
        IT_FIELDCAT              = GT_FIELDCAT[]
      TABLES
        T_OUTTAB                 = GT_SFLIGHT.
    ENDFORM.                    " alv_display
    Regards
    vijay

  • Refresh the content of a page

    I' am developing a web monitoring console. Therefore I must be able to refresh the content of a page(table) and requery the underlying sql. Must I use a timer or are the other methods and alternatives.

    I am creating a project in Java Studio Creator 2. It starts out with a login screen and depending on the user rights, it lists(in a listbox) the possible pages the user has access to. From here the user selects the page they want to go to and takes them there. Now the problem that I am having is that this final page they are taken too needs to be refreshed every 5 seconds.
    I tried to add <meta http-equiv="refresh" content="5"/> in my <ui:head, but it just returned an error. After a little tweaking, I came up with <ui:meta httpEquiv="refresh" content="5"/>.
    The problem that I'm now having is that the page will wait 5 sec, and then reloads the previous page with the listbox. What am I doing wrong?
    The JSP head code that I have is as follows:
    <ui:head binding="#{Page3.head1}" id="head1">
    <ui:link binding="#{Page3.link1}" id="link1" url="/resources/stylesheet.css"/>
    <ui:meta httpEquiv="refresh" content="5"/>
    </ui:head>
    Now another question that I have, is how can I get a different page to start refreshing every 5 seconds after pressing a button and have it stop after pressing a second button.
    Thanks in advance,
    Raimie

  • Refreshing JTable contents (rows and columns) handling.

    Hi,
    I have a general question related to refreshing the contents of JTable and handling some application specific requirements.In our application we are planning to refresh the contents of JTable automatically after certain period of time by fetching data from database and update the JTable contents or user has clicked refresh button.
    But following scenarios we are planning to handle when refresh is called automatically or user has clicked refresh button.
    1) User is working with data of JTable. Like rows of JTable has checkBoxes and user selects them and doing operation like viewing the details of selected rows in new details dialog. So if refreshing is done then the selection will be lost if I update the whole data in JTable.
    a)Will it be possible to append the data at the end of JTable rows without disturbing the existing JTable contents.
    b) Is it feasible to compare the data of existing rows and newly fetched rows and update only the rows whose values are changed in database or update specifically updated columns. But this comparision for finding changed values will result in performance problems.So are there any other alternatives of doing this, ideas are most welcome.
    c) Simple way is to alert the user that data will be updated and everything will be refreshed will be the choice in worst case.
    I guess many may have encountered such problems and may have solved it depending on the product requirements.
    Ideas and suggestions are most welcome.
    Regards.

    Hi,
    Here are my views and my assumptions.
    Assumptions :
    1) Your JTable is populated with list of Objects.
    2) Your tables in database is having columns like created date, created time, updated date updated time
    3) Order by clause for all the time will remain same.
    If these assumptions are correct then I think you can achieve your goal.
    Here how it is.
    Your application session will maintain last db hit time and will maintain for every hit that applicate made to fetch data from db.
    When object is created on the server side once it fetch data from table it will compare the created date/time or update date/time with the session varibale that holds last visit date/time. Based on this flag need to be set to indicate if this item is added/updated/deleted since last visit.
    And when all these object is returned to your client, the table model will iterate through the list and based on object index in the list and and if object is changed will update only that perticular row.
    Hope this is what you want to achieve.
    Regards

  • Refreshing Form contents

    I have got three elements in my JFrame form. I removes one and want to refresh the contents of the window. Id I try to use repaint method, javac says its deprecated. Can somebody help me?
    Regards
    fahda

    Hi,
    Try calling the validate method. It's used to cause a container to lay out its subcomponents again after the components it contains have been added to or modified.
    Hope this helps.
    Bye!
    Pablo

  • Refresh alv grid after user clicks f4( value-request)

    Hello Experts,
    I am currently developing a module pool program wherein after the user selects a value via f4(value request),
    my ALV grid(using custom control) should be refreshed to show the new records selected based
    on the f4 value. How can this be achieved?
    thank you guys and take care!

    Did you try a CALL METHOD [cl_gui_cfw=>set_new_ok_code|http://help.sap.com/saphelp_sm32/helpdata/en/06/3fa1b79f2811d2bd68080009b4534c/frameset.htm] and [=>flush|http://help.sap.com/saphelp_sm32/helpdata/EN/06/3fa1879f2811d2bd68080009b4534c/content.htm] in the POV section or in event onF4 handler method to force execution of PAI (either it works either it dumps)
    Regards,
    Raymond

  • Refreshing ALV from POV

    Hi Experts,
       I have a module pool screen, in which I have an input field and under that I have OOPS alv grid control.
    I want to select a value from search help for that input field. The moment I select the value in that input field,
    according to the input field value, the content of ALV should be changed and it should be refreshed.
    How to get it, when PBO is not called, as we call POV.
    Thanks and regards,
    Venkat.

    Hi,
    Well actually SAPGUI_SET_FUNCTIONCODE is ok as soon as you are correctly refreshing your ALV in PBO...
    MODULE pbo.
      IF gr_alv IS NOT BOUND.
         "Create ALV object
      ELSE.
        gr_alv->refresh( ).
      ENDIF.
    ENDMODULE.
    MODULE pov.
      CALL FUNCTION 'SAPGUI_SET_FUNCTIONCODE'
    ENDMODULE.
    works perfectly on my side...
    This is also working with the use of CL_GUI_CFW=>SET_NEW_OK_CODE indeed...
    Cheers,
    m.
    Edited by: Manu D'Haeyer on Oct 14, 2011 1:45 PM

Maybe you are looking for

  • How on earth do I restore my old Address Book from Time Machine?

    Problem: I really, really need to retrieve someone's number. I know it'll be in an old version of my Address Book. I can see when I open time Machine that my address book is backed up, but no matter the date I go to, it says the Address Book was last

  • Failover cluster fails validation after a single node restart

    I had a lab environment setup that works great, passes validation, can do live migrations without issue but as soon as I restarted one of the nodes, the then still live node became the only node able to access the storage backend. What's weird is tha

  • How to create Function Module

    Hi, I am trying to create a function module using RSAX_BIW_GET_DATA_SIMPLE  as a template. Can someone tell me how can I modify and rename this module. Also, how can I create extract structure from the function module. I have tried to create a module

  • Warning: MDB application is NOT connected to messaging system on console

    An application works on weblogic 8.4 recently upgraded to weblogic 10.3 with Foriegn JMS server configuration. <foreign-server name="Fax JMSServer"> <notes>The Foreign JMS Server Confirm uses to talk to Fax</notes> <default-targeting-enabled>false</d

  • Can't Open TIF in ACR

    I have some files that were JPEGs which I opened in ACR, did some work, and then transferred them to PS. After saving in PS as TIF files, I cannot reopen them in ACR. They do not open automatically in ACR, and Ctrl-O and Ctrl-R do not open the files