Reg:bsp error in ICF node

hi ,
i had developed a BSP Application in sap 4.7 ,but when i test it iam getting the below error .
certain ICF nodes must be released in transaction SICF for the BSP Extensions HTMLB
SAP/BC/BSP/SAP/SYSTEM
SAP/BC/BSP/SAP/PUBLIC/BC
SAP/PUBLIC/BSP/SAP/PUBLIC/BC
could any one help me out regarding this issue.
Thanks & Regards
Satish.

In OSS note <b>517484</b> on https://websmp204.sap-ag.de/notes , and there we can find that for BSP following services should be activated!
<b>Goto SICF Tcode & activate the below nodes:</b>
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/def ault_host/sap/public/bc (available for 620 with Support Package 34)
/default_host/sap/public/bc/ur (available for 620 with Support Package 34)
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/defaul t_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb (as of Release 620 Support Package SAPKB62026)
Note: After you activate the BSP service, the corresponding application services must also be activated.
Raja T
Message was edited by:
        Raja Thangamani

Similar Messages

  • Error in the ICF node

    When I attempt to test the WebDynpro WDT_QUIZ I get the following error message in Firefox and Internet Explorer:
    Error in the ICF node
    To log on, specific ICF nodes must be activated in transaction SICF
    Check the following ICF nodes, as described in note 517484:
    /sap/public/bc
    /sap/public/bc/ur
    Any ideas how I can fix this issue? I've had a look at the OSS note and the SICF transaction. It seems there isn't a node /sap/public/bc/ur so perhaps this is missing?
    Thanks for any help.
    JB

    Fixed this issue now - the services under <i>sap -> public</i> in transaction SICF were deactivated. I activated them and the WebDynpro is now working correctly.
    Cheers,
    JB

  • E-Mail Alerts Configuration in PI ... BSP error

    Hi All
    Am configuring alert framework. Process till getting them in Alert Inbox is done. Now I wanna direct the alerts to my e-mail ID.
    Steps that i am doing :
    1. E-Mail ID added in SU01.
    2. SCOT configuration is done.
    3. Now under Alert Inbox(RWB) when i try to use the Personalization tab it throws a BSP error stating :
    BSP exception: Cannot start application sap/alertpersonalize_rules. Use transaction SICF to create application node. gsknoten an.
    *Error type: *
    Your SAP Business Server Pages Team
    Now I don't have enough time to contact the team(Honestly I don't even know if there's such a team  :P ). Hence thought of doing it myself. Am not bothered about accesses. I have any access required at my disposal. But I need the exact steps to be followed in SICF.
    Tried following this : http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm  But am lost now.
    Kindly suggest me how to get this Personalization tab (in RWB) activated.

    Did not see any settings required on Personalization tab at least in this document
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154&overridelayout=true
    Please check if it helps.

  • BSP error while adding an SAP Note to my Favorites list...

    Hi,
    I have an SAP Service user-id(service.sap.com market place user id).
      Once after finding the required SAP Note for my issue I am trying to add that SAP Note to my favorites list.
      But system is issueing a BSP page error as follows. Can you please tell me how to add an SAP Note to your favorites list...
    ===================================
    Business Server Page (BSP) Error
    What happened?
    Call of BSP page terminated due to error.
    Note
    Following error text processed in system:
    An exception with the type CX_SY_RANGE_OUT_OF_BOUNDS occurred, but was neither handled locally, nor declared in a RAISING clause
    Exception Class CX_SY_RANGE_OUT_OF_BOUNDS
    Error name STRING_OFFSET_TOO_LARGE
    Program CL_O29E2JGD0M2HLPZ4ERRFVYKRX1RCP
    Include CL_O29E2JGD0M2HLPZ4ERRFVYKRX1RCM009
    ABAP Class CL_O29E2JGD0M2HLPZ4ERRFVYKRX1R
    Method _ONINPUTPROCESSING
    BSP Application /SPN/FAVORITES
    BSP Page ADD_LINK.HTM
    Row 114 
    Long Text -
    Error Type: Exception
    Your SAP Business Server Pages Team
    ===========================================
    Thanks in advance...
    Regards,
    Bharat.

    Hi,
    It is a one-time error or do this occurs each time ?
    Did you choose a really long name or something (the "String offset" description tends to prove it has to deal with some string length) ?
    Otherwise, open an OSS message.
    Best regards,
    Guillaume

  • Error in BPM - Error when processing node '0000000065' ParForEach index

    Hi All,
    I have an issue .. I have done 1:n mapping successfully and would like to place the Send step in loop instead of a Block .. The reason being I have the count of how many times the Send step should executed for multiline.. I need to receive an Acknowledgement for each send step.. If I dont receive the required number of Acknowledgements then .. I need to revert back some Creations which is a business requirement ..
    So .. I have initialized a container operation variable i to '0' .. Then the loop condition is i < count .. Send the multi-container .. Receive the Response .. If dont receive the desired response for any one of the multi-line then I need to do a cancellation process in a loop again .. So .. now I am getting an Exception "Error when processing node '0000000065' (ParForEach index 000000)
    Message no. SWP088" in the loop step ..
    It is fine if somebody can suggest alternate logic can be applied as well but first preference to use a loop which consumes lesser system resources ..
    Kindly look into the Issue
    Regards,
    Raj
    Edited by: raj2112 on Sep 21, 2010 2:34 PM

    if you use a loop step, you will send one message per time. ussing block step you have parallel processing ussing ParForEach. now is for  X reason the item cannot be created, do a roll back in the target system. the problem here you will do the rollback once the last message reach.
    the other posibility is to handle application ack in the sender step. it will let you know it the message was processed success and this ack could be the end condition of your block step. but you cannot use this with loop step.
    take a look to this
    http://help.sap.com/saphelp_nw04/helpdata/en/55/65c844539349e9b1450581ab44a5e6/frameset.htm

  • DAC message while running execution plan - "Error while loading nodes"

    I have just installed and setup Informatica 8.6.1, DAC, BI apps 7.9.6 for a Oracle Ebs R12.1.1 source instance
    In informatica I have defined 2 relational sources "DataWarehouse" and "ORA_R1211" - the same names as in physical data sources of DAC
    I have mentioned the flatfile parameter as "ORA_R1211_Flatfile" in DAC
    after successfully build, when I run the ETL the error "Error while loading nodes" occurs.
    the log file shows the following details:
    START OF ETL
    20 SEVERE Sat Apr 23 21:57:58 GST 2011
    ANOMALY INFO::: Error while loading nodes.
    EXCEPTION CLASS::: java.lang.NullPointerException
    com.siebel.etl.engine.core.SessionHandler.getNodes(SessionHandler.java:2842)
    com.siebel.etl.engine.core.SessionHandler.loadNodes(SessionHandler.java:473)
    com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:372)
    com.siebel.etl.engine.core.ETL.run(ETL.java:658)
    com.siebel.etl.engine.core.ETL.execute(ETL.java:910)
    com.siebel.etl.etlmanager.EtlExecutionManager$1.executeEtlProcess(EtlExecutionManager.java:210)
    com.siebel.etl.etlmanager.EtlExecutionManager$1.run(EtlExecutionManager.java:165)
    java.lang.Thread.run(Thread.java:619)
    21 SEVERE Sat Apr 23 21:57:58 GST 2011
    *     CLOSING THE CONNECTION POOL DataWarehouse
    22 SEVERE Sat Apr 23 21:57:58 GST 2011
    *     CLOSING THE CONNECTION POOL ORA_R1211
    23 SEVERE Sat Apr 23 21:57:58 GST 2011
    END OF ETL
    *****************

    Hi,
    Mark the current EP as completed and re-assemble the subject area, generate parameters and build the EP and run the load.
    Thanks,
    Navin KumarBolla

  • CRM 7.0 - New mailform in the email profile causing BSP error

    Hi all,
    I want to start to use standard responses in IC to make it more easier to reply to incoming emails... and also the tracking service ticket ID text in replies...
    I followed John Burton's ERMS guide, but after I created new mailform via txt  CRM_ERMS_MAILFORMS it was not possible to select it in e-mail profile... So I went to the webclient and created one more new mailform via webclient page . Afterwards this mailform was visible and able to select in the e-mail profile.
    I tested to create new email, but page was not displayed and it all ended in BSP error stating that error MAIL_NOT_FOUND exception... It seems like this mailform is not recognized by ERMS ...
    Same error happens when I select this mailform as one of the standard responses in response group and do not want it as automatic tracking text in the email reply...
    Can you please help me with this issue? what's wrong with this mailform or do I miss some additional ERMS customizing?
    Thanks a lot for help.

    Seems like the problem is the format of mailform (I changed it to "plain" text from HTML and it works correctly)... I need to test it also on different enviroment before I will close it...

  • BSP Error when copying text from email to Note section of a transaction

    Hi All,
    We are using CRM2007 for both the Interaction Centre and Sales Web Client.
    When a user is creating a transaction in both roles, if one copies a piece of text from an email into the note section of a transaction at times the web client crashes and gives a BSP error.
    It seems that cetain symbols are not recognised and cannot be converted when they are copied into the note section. The symbols I have noticed this to occur on are the dash symbol and the apostrophe (') symbol.
    The symbols are fine when they are typed in directly, the issue only occurs if they are copied in.
    The web client cannot handle this exception and falls over as a result.
    However, if the text is copeid into the note section of a transaction in CRM online, any symbols it cannot convert correctly automatically convert to a hash (#) symbol.
    Has anyone come across this issue before? Or have an idea as to how it could be resolved?
    Even if it was possible for the webclient to convert any unknown symbols automatically into a hash (#) symbol like CRM Online so the web client would not fall over on save of a transaction.
    Your help would be greatly appreciated.
    Thanks,
    Jonathan

    Hi Inderjeet.
    Thanks for the reply I guess we could not get the fiddler trace as we are getting this error while i am copying the data to excel file which is present on drive from SharePoint this is not on a browser. Correct me if I am wrong
    And Alternate access mappings and IIS bindings are perfect.
    Thanks,
    Neela Krishna.

  • Getting Business BSP error when a manager opens an attachment in MSS

    Hi All,
    In Portal when a manager is trying to open an attachment( appraisal document ) of a reportee from MSS, getting the below error:
    Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    BSP Exception: Das Objekt 4BE12AD4938E0C4CE10000000A831C37 in der URL /sap(bD1lbiZjPTMwMCZkPW1pbiZwPTM1MzI3JnY9NyUyZTAwJmk9MSZzPVNJRCUzYUFOT04lM2FhdGxhcy1lY2NfRUNUXzAwJTNhdThJRnZnQWZ5eXJPcG94a0NYak5NZ2Z3cER5eEhlRlNwUk41VGFwbC1BVFQ=)/bc/bsp/sap/hap_document/4BE12AD4938E0C4CE10000000A831C37 ist nicht gültig.
    Can someone help me out on this?
    Thanks in advance.
    Regards,
    Thirun.

    Hi,
    We find no dumps in ST22 for this error.Checked in SLG1 as well, but didnot find any errors.
    Also Manger is gettig the same error even after giving SAP_ALL role.
    Kindly suggest on this.
    Regards,
    Thirun.

  • BSP error when trying to  upload employee photo

    ,<h1>.Dear Experts,<</h1>
    <h2>I am trying to upload employee photo on my SAP system DB.
         I am following note 595563 and performing below mentioned activities.</h2>
           <h3> * Make sure that the HTTP plugin is active.</h3>
        <h4>  Transaction SMICM, "Display Services" function key (shift F1). The list of services must contain a port other than 0 for HTTP. If not, you must adjust the relevant profile parameter.
         Typical entry:
          icm/server_port_0         PROT=HTTP, PORT=1080, TIMEOUT=900
    Make sure that the /sap/bc/contentserver service is active.
          Transaction SICF, select: default_host - sap - bc - contentserver. Select the function to display/change the service. Check that a user is defined.
          If a user is not defined, use Transaction SU01 to create a new user. Use the "System" user type. Assign the profiles SAP_ALL and SAP_NEW to the user.
          Using the relevant data from the user that has just been created, maintain the anonymous logon data for the service /default_host/sap/bc/ and then save the changes.
    Check the system PSE.
          Start Transaction STRUST. Expand the system PSE. The system PSE must be green for each application server.
    Determine a suitable exchange directory.
          The archive system must be accessible from every application server. If all application servers are running on the same platform (for example, Windows), one network directory that is accessible on all application servers (for example,
    server\share) is sufficient. You can generally use the global directory (profile parameter DIR_GLOBAL). You can use report RSPARAM to determine the profile parameters.
    Setting up the storage
    Create a table for storing the data.
          Use Transaction SE11 to create a copy of table SDOKCONT1. If you want to create the repository database, you can call the table ZCONT_DB, for example.  Save the table as a local object. Activate the table.
    Create the repository.
          Use Transaction OAC0 to create a new repository.
          Use the following parameters:
            Repository                              Max. two characters, for example, DB
            Document area ArchiveLink
            Storage type    R/3 database
            Storage subtype normal
            Version no.      0046
            Contents table <table name>     for example: ZCONT_DB
            Exchange directory   <directory name>          for example:
    server\share\
          Note that the exchange directory ends with a \ (or a / on Unix). If you are using a variety of platforms, you must use Transaction FILE to define a suitable logical file name, and use this file name.
          Save the settings.                                                                               
    </h4>
      <h5>
    Everything goes well  but when i try to test the Repository created by  RSCMSTH0 in SE38 it throws the error </h5>
      HTTP error: 404 Business Server Page (BSP) Error
    Message no. CMS025
    Diagnosis
    Error in accessing via HTTP
    404 Business Server Page (BSP) Error
    Please help. M i missing anything ..?
    <h6>Regards,
    Alok</h6>
    Edited by: Nikhil Manjrekar on Aug 14, 2009 9:45 AM
    Edited by: Nikhil Manjrekar on Aug 14, 2009 9:45 AM

    Hi,
    I am getting same problem what is the solution??
    Thanks
    Santhosh

  • OBIEE Error 'Root XML Node nqw not found in island!'

    Hello,
    After I altered my Hyperion Essbase structure, my OBIEE Reports don't open.
    I increase one generation in my accounts hierachy, and now when I try open my OBIEE reports, I get the follow error:
    "Root XML Node nqw not found in island"
    Any help?
    Thanks,

    Hi Naresh,
    I hope you have resolved the issue by this time.
    In my case, it was related to an invalid filter on the report.
    I have removed the filter by updating the report .xml file from Catalog Manager.
    Hope this helps other with similar issue.
    Thanks,
    Ravi

  • I have an error of invalid node structure

    I have an error of invalid node structure.  Can I save my data from my hard drive? Is it even fixable?

    Invalid Node Structure is not a hardware failure, it never was (you may still have a hardware failure, but the Invalid Node error is not indicative of this problem. 
    Still, Disk utility will certainly fail to fix it, and DiskWarrior will probably fail too.  
    But don't despair.  Try this, and don't give up till you've tried it at least three times.
    First, get the name of the partition of the failing volume.   You can get it most easily by finding your disk in Disk Utility, selecting your partition (not the drive) and type cmd-i.    Look for "Disk Identifier" right at the top.
    Then,  open up Terminal, and type this:
    sudo /sbin/fsck_hfs -yprd /dev/disk5s2 
    substituting your disk identifier for the one already here.   Keep the "/dev/" part.   Enter your password, and wait.  It may take a while.  I have had this fail several times before finally working so its important to keep trying.   It's faster than a reformat!!!
    If the afflicted disk is your startup disk, you will need to do this in recovery mode: restart the computer, hold down option, and wait for the disk options to appear.   Select that, then proceed to Disk Utility and then Terminal as described above.  
    Good luck, and always keep a backup!
    chris watts

  • BSP errors..

    hi all,
    i am doing the BSP tutorials given on SAP help site..i am on the fourth tutorial(further extending the bookshop application) while creating the <b>basket.htm</b> BSP i get the following error:
    <b>Field "M_BASKET" is unknown.It is neither in one of the specified tables nor defined by a "DATA" statement.</b>
    And while creating the <b>order.htm</b> BSP i get a runtime error:
    <b>Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    An exception with the type CX_SY_CREATE_OBJECT_ERROR occurred, but was neither handled locally, nor declared in a RAISING clause
    Exception Class CX_SY_CREATE_OBJECT_ERROR
    Error Name CREATE_OBJECT_CLASS_ABSTRACT
    Program CL_BSP_CONTEXT================CP
    Include CL_BSP_CONTEXT================CM006
    ABAP Class CL_BSP_CONTEXT
    Method GET_APP_CONTEXT_CURRENT
    Line 49 
    Long text The class 'CL_BSP_APPLICATION' is abstract. No instances can be created from abstract classes.
    </b>
    Help plz..Thanks everyone.

    Hi,
    <i>Regarding your first error in basket.htm</i>
    You will have to use the application class <b>CL_BSP_TUTORIAL</b>.
    To do this just double-click on the bsp application name where you defined <b>Navigation Requests</b> in the first tutorial, click on the <b>Properties</b> tab and in the field next to <b>Application Class</b> put the application class name as : <b>CL_BSP_TUTORIAL</b>
    <i><b>This should solve the second error too...just check and let us know...</b></i>
    Hope this helps.
    <i>Do reward each useful answer..!</i>
    Thanks,
    Tatvagna.

  • Business Server Page(BSP) Error!!

    Hi Friends,
    I have deployed the business package of Supplier Collaboration 2.0. When i click few of the iViews then i am getting the error as:
    <b>Business Server Page(BSP) error:</b>
    <u>SAP Note: The following error text was processed in the system:</u> <i>BSP Exception: Access to page default.htm requires HTTPS. HTTPS has not been configured on this server.</i>
    As per the BP guide, they havent mentioned anything to change the settings. We made sure the System alias used by this iview does exist., so there is no issue of system alias.
    Kindly let me know if anyone knows..about this.
    Thanks,
    Raghavendra Pothula

    Hi,
    Where we have to set this https service.....
    Thanks & Regards
    Ravi Shankar B

  • Error converting DOM nodes into SOAP nodes

    Hi,
    i am doing an http call using http binding activity in oracle soa suite 11g.The http call requires some header information.When I pass the header information through headers in invoke activity and invoke the http call,I get an error " Error converting DOM nodes into SOAP nodes".What might be the reason and how to solve it.
    Naresh

    Hello,
    It appears your code is trying to repeat messagePart itself. Split Joins strictly adheres to a WSDL definition for incoming and outgoing messages.
    Instead of repeating <RootElement> which is defined as single occurance in your message definition within WSDL, you should find a way to tweak the WSDL to have "repetitive node which will become single message after split" within 1 Root element.
    This will call for having need of implementing transformation within split join based on need of target input message. Below is the example:
    WSDL contains:
    <wsdl:message name="inputMessageName">
         <wsdl:part name="partInput" element="rootElement"/>
    </wsdl:message>
    What your current xml structure is(please note how message itself is repeating below while it has been defined as single in wsdl, unfortunately there is nothing maxOccurs for message in WSDL definition , although you can define multiple parts but that is not case here):
    <soap:Body>
    <rootElement>
    </rootElement>
    <rootElement>
    </rootElement>
    <rootElement>
    </rootElement>
    </soap:Body>
    What Split-Join expects(If you have existing wsdl then you need to tweak it to conform to below kind of structure then use transformation within split join to convert it into correct xml structure for outgoing):
    <soap:Body>
    <rootElement>
         <repetitiveElementSpecificToIndividualSplitRequest/>
         <repetitiveElementSpecificToIndividualSplitRequest/>
         <repetitiveElementSpecificToIndividualSplitRequest/>
    </rootElement>
    </soap:Body>
    I hope this helps.
    Regards,
    Ankit

Maybe you are looking for

  • [SOLVED] Trouble creating a ramdisk for my custom kernel

    Alright so I am compiling my own kernel and have been following the wiki here, https://wiki.archlinux.org/index.php/Ke - l_RAM_disk and I am stuck at that part, making a ramdisk for the kernel. The step before that, which was to copy bzimage to /boot

  • WIS 10901 error while running WEBI report

    Hello All When we try to run WEBI report on BW query for Cost center accounting infocube its giving following error when we add measure in the info view. "A database error occured. The database text is: Error in MDDataSetBW.GetCellData. See RFC trace

  • T400 dvd rom can not be open...

    I purchansed my t400 at the beginning of this month,model:27652KM.  Just typed a report on the notebook. Resized disk C myself.   Rarely use the dvd  rom. The disc loading dock can not be open....all the indicators seem ok. Could someone give me some

  • Best way to achieve multiple paths with quizzes using Captivate 6?

    I'm looking for the best way to achieve multiple paths and quizzes using Captivate 6. Here is the scenario: The learner watches general slides 1 – 3 and then chooses between Path A, Path B, or both paths combined.  If they choose Path A then they wat

  • Report DW error with CSS position

    To the Adobe staff I use this forum cause I can't find where the F... to report an error! There is an error in Dreamweaver CS4 french (canadian) version. When you create a css style, the position tab, the fonction fixed has been translated and should