Reg Business tranx field in BAPI while posting ACC document.

Hi,
I am posting a accounting document through BAPI.
My requirement is to post a JV for Goods receipt.
While filling the Header level details to BAPI, we have BUS_ACT field in BAPI'BAPI_ACC_DOCUMENT_POST'.
What parameter i have to pass to it.
Thanks in advance,
Deepak.
Message was edited by:
        KDeepak

Hi Deepak,
Try one of the following:
'RFBU'
'SD00'
'RMRP'
This will solve your problem. I posted the documents using second transaction.
Reward points if helpful answer.
Ashven

Similar Messages

  • How to Bypass Tax Jurisdiction Code  while Posting FI Document

    Hello All,
       I have a requirement where I can enter Tax code along with Tax Jurisdiction for some of the cases while Posting FI Document using T code s FB01.. etc.
    However for  one scenario I need to BY pass the Tax Jurisdiction while posting FI Document . How to achieve this.
      As  per SAP once we define Tax Jurisdiction it is mandatory to enter as Input to Post the document.
      But I need to control this Tax Jurisdiction as I dont want to enter  while posting FI Document.It should not prompt for Tax Jurisdiction .
      How to make an option field in this case (Based on Company code and Tax code combination).
      Any BADI / User exit/BTE to Ignore the Error message Enter Tax Jurisdiction code).
    Please help me as soon as possible.
    Thanks.

    My Query is , when am posting a document in FB01 Transaction , when I enter Tax code at line item level, Tax jurisdiction is mandatory if we dont enter it give an error saying that ' Please enter a Tax Jurisdiction' .
       My requirement is I would like to bypass that error without entering Tax jurisdiction I would like to proceed by providing default Tax Jurisdiction through any userexit/BADI/BTE. so that I will not get that error .
       So any USER-EXIT/BTE/BADI is there which will trigger before the error(maintain tax jurisdiction )  at line Item leve ?????
    I hope now requirement is clear.

  • BTE while posting accounting document through MIRO

    Hi All,
    I am doing MIRO posting with PO,while MIRO posting accounting document is getting created for it.  I need a BTE while posting accounting document through MIRO to trigger workflow(through event).
    For direct accounting document posting I found the BTE 1030 to trigger workflow.
    Thanks
    Sree

    Hello !
          The BTE required is "00001120     DOCUMENT POSTING:  Field substitution header/items".
          Double click on this entry at FIBF transaction and you will find the function module SAMPLE_PROCESS_00001120
          Take a copy of this function module and go ahead.It is not possible to change the tables T_BKPF and T_BSEG. So, use the tables T_BKPFSUB and T_BSEGSUB.
    Regards,
    S.Suresh

  • Posting period 011 2013 is not open while posting the document using F-02 getting the error

    Hi SAP Captains,
    Pls help me here.
    While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open.
    Please help me how to do, can you provide step by step.
    Rgds..Suresh

    Hi Suresh,
    You can search google and will get number of posts on this. This will lead to duplication of similar posts on forum.
    The message says "FI posting period is closed for 11th period of 2013". In which period you are trying to post the transaction?
    If it is past, open the FI posting periods in OB52.
    BR, Srinivas Salpala

  • Runtime error while posting a document (FB70/FBS1)

    Hi
    I am getting a runtime error while posting a document through FB70 or FBS1 .
    The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
    And the program dumps in Function module SO_KPRO_DECIDE.
    Has any one faced this problem?

    Hi,
    Please check the psoting date and also the reversal  date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
    Thank you,
    Shilpa.

  • FA Retirement- 21151: error while posting asset document: '100000039'

    Hello Experts,
    I have a client who encountered this error during fixed asset retirement - scrapping.
    After selecting the asset to be retired, sap did not assign an account in the account column, but the user
    was able to save the document.  After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'.  The document number the systems is referring to is the last document saved but sap did not assign an account code.
    Please help. My client is using sap b1 8.81 patch5.
    Regards,
    Luz

    Hi Too Mui Hwee,
    What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
    Thanks

  • FI error while posting one document

    While posting the document(501 - gr w/o PO), i'm getting the error:
    "Account determination requires an CO object"
    I've maintained the material master with costing view and also assigned profit center.
    I Belive in  Obyc t-code, -- in GBB -- in general modification column.. key needs to be enabled with g/l account.
    Pls explain what is the general modification and what is the key for 501 - gr w/o po
    Thankyou

    hi
    Go to FS00
    enter GL account no & Comp Code.
    Click Change button
    You might have to seek help of an FI consultant to do so.
    Also in KA01 create this G/L account as a cost element against your controlling area assigned to your Chart of Accounts, you can do so by clicking on Extra's tab in transaction KA01
    Regards

  • Problem while posting FI document through BAPI - Multiple Exchange Rates

    I am able to post FI document with multiple exchange rates for the same currency using FB01. But, when I try to post the same document details using BAPI_ACC_DOCUMENT_POST , it throws an error F5 701 - Inconsistent Rate for Currency XXX .
    How can we avoid this error while posting through BAPI ?
    Thanks & Regards,
    Nidhi

    Hi Nidhi,
    Value range
        The field CURR_TYPE (currency type) describes the role played by a
        currency in the SAP System.
        The currency type can take on the following values, for example:
        o   00      Transaction currency
        o   10      Company code currency
        o   20      Controlling area currency
        o   30      Group currency
        o   40      Hard currency
        o   50      Index-based currency
        o   60      Global company currency
        If an entry is not made in the field CURR_TYPE, the default value "00"
        is retained.
        If only one data record is transferred in transaction currency for each
        line item, the field CURR_TYPE does not need to be filled out. If
        several data records are transferred for each line item, the currency
        type must be entered for each record.
    If the parameter CurrencyAmount is filled with the currency fields,
    a complete document check including characteristics and value
    components of profitability analysis (CO-PA). Otherwise, the account
    assignment objects are checked.
    Check the BAPI documentation SE37.
    Regards,
    Boobalan Suburaj

  • PO field not appearing while posting Vendor Invoice

    Hello,
    While posting an entry using FB01/ F-43, for posting key 31(Vendor Invoice), despite making Purchasing Document (Purchase Order) field optional in the field status group of both the posting key 31 as well as the Reconciliation (GL) Account, the Purchasing Document field is not appearing. Please provide the solution if it's possible to get this field while posting the entry.
    Thanks and Regards,
    Sumita

    If you try to book vendor invoice through F-43 or FB01 t codes, then, the system would always show PO open for invoice verification.
    In case of a PO, IV should always be done through MIRO t code.
    Thanks.
    VS

  • Error while posting parked documents

    HI ALL,
    After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Please check it.
    Thanks!

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • FBV0 - Error while posting prked document..

    Hi Team,
    I am getting the below error while trying to post a Parked Document in FBV0*
    Field BSEG-SECCO. does not exist in the screen SAPMF05A 0302
    Message no. 00349
    Diagnosis
    The specified field does not exist on the screen.
    Procedure
    Check your batch input data.
    Kindly assist on this...
    Thanks in Advance !!!!!!

    Hi,
    If you park a document using transaction FB01 or a relevant ENJOY transaction, all substitutions are run - in contrast to transaction FBV1, which is a parking transaction only. It is possible in this case to use substitution to fill fields that are not ready for input in the line item or that are not available.
    When you post the parked document using transaction FBV0, FBV0 with a list, or FIPP.POST, the posting is executed using CALL TRANSACTION. The system collects all data from the parked document and reprocesses the data for CALL TRANSACTION. A batch input runs in the background. This transfers all field contents from the parked document to the relevant screen fields. If a field that does not exist on the screen is to be filled, the system issues error message 00349.  You cannot post the document.
    Check your substitutions. Make sure that you never substitute fields in the parking that are not ready for input.
    Regards,
    Jigar

  • Error while posting parked document in fbv0.

    hi experts,
    while posting a parked document in transaction fbvo the follwing information appears
    and document is not posted.
         Field WITH_DIALG-WT_BASE(2) is not an input field
    message no 00347
    Diagnosis
    A transaction is processed using batch input.
    System Response
    The runtime error field xxx occurs (invalid entries)
    Procedure
    Correct the batch input data. Depending on the processing scenario, this can affect either of the following objects:
    Batch input session
    CATT procedure
    Application program
    regards
    pankaj

    Hi
    Do one transaction in foreground and check where system is giving error and correct it.
    Thanks
    GG

  • Bapi for posting FI documents for new General ledger accounting

    Hi,
    We have a requirement for posting FI documents for new General ledger i.e for transaction FB01L. Is there any BAPI for the same so that BDC can be avoided.
    The BAPI "BAPI_ACC_DOCUMENT_POST" is used for FB01. Can we use it for FB01L?? As in this BAPI ledger group field is not there. Please suggest.
    Thanks in advance.
    Regards,
    Gaurav

    Hi Sandra,
    Solved myself using the below options.
    If you are using the BAPI - BAPI_ACC_GL_POSTING_POST, you can pass accounting principle field in importing structure BAPIACHE08. The relation between Legder group & accounting principle has to be configured in SPRO by FICO consultant. Once they configured in the system, get the accounting principles and then pass the accounting principle .
    Code:  s_documentheader-acc_principle  = wa_header-acc_principle.
    Reward me if this will help you.
    Thanks,
    Yerukala Setty

  • Error while posting parked document

    Hi  all,
      We are in ECC 5.0.  While posting a parked invoice document, (created
    through MIRO), the system is giving an error saying, 'Account XXXXXX
    requires an assignment to a CO object . Msg. No. KI235) for Rounding off
    account. 
      This G/L account has a cost center assigned in OKB9 and there is no
    problem in the validity of the cost center and it is being displayed
    when the document is simulated.
      We are facing this problem only when posting a parked document. 
    While directly posting a document, there is no problem.
      Any suggestions?
    Regards,
    Sundar Rao

    Hi Paul,
    The error is occuring when I am posting a parked invoice document.  When I try and post it directly through MIRO, there is no problem.
    I am unable to understand your reply.  Can you please elaborate?
    Regards,
    Sundar Rao

  • Error while posting billing document

    dear gurus,
    while posting the billing document,the following error will appears.
    "no taxes on sales / purchases are allowed for accounting 20704540  1000, E4 not allowed."
    please do the needful.

    First check whether you have condition records for your tax. If it is there, then check the tax code assigned to the condition records. Seems E4 was incorrectly assigned to it. Check the correct sales tax code and assign. now try to post the billing document. Try first in sandbox or test environemnt.
    Regards,
    Sats

Maybe you are looking for