Reg. Calculated tax values in Purchase order
Dear All
I have to print tax percentage and value applicable in Purchase order. In po, at item level by clicking <i>invoice view</i> tax code appear as 3C besides button named <i>TAXE</i>S. on clicking <i>TAXES</i> different value of tax and excise with percentage appears. all these appears thru komv structure. i want to print these vales.
by click <i>Where used Structure KOMV</i> there appears many object /classes. but i dont know how to use these. kindly provide me solution to fetch these values.
thanks/regards
Manjit
Create Tax code in FTXP
Let us SAy A1 --Note : for purchasing it should be input tax only
Then in FV11 Create condition record with plant material and vendor combination with cond type as JVRD
Maintain the TAx rate as 4 % or whatever is applicable
also enter the Tax code as A1 which u have created for ur tax procedure TAXINN
SAve it
Create a PO for the same material,vendor and plant combination
and enter the Tax code as A1
I think with the above details ur tax should get calculated
regards
shailesh
Similar Messages
-
Printing Tax Values in Purchase order
Hello MM Gurus,
What is the configuration required to print the Tax values of BED,Cess etc.
in the Purchase order. I have selected "X" in the print column of Tax pricing
procedure. But, Tax values are not coming in the print out.
Kindly respond quickly as this requirement is very urgent.
Regards
YogaHi Yoga,
These values will not come in PO print out since they are stored as NAVS or JEXS. You will have to break them up using the conditions types defined by you.
You can refer to these tables
KONP, T685T,J_1IEXCTAX,J_1IMTCHID,KONV,J_1IMATEXP
to calculate the same
prasanna -
Exit or BADI when Tax Calculation in MIRO from Purchase order
Hi Gurus,
I Need a Exit or BADI when Tax Calculation in MIRO from Purchase order.
The problem is the tax is automatically calculated from tax code in PO but I want it to be calculated
from PO condition. Is there any exit available by which I can modify the value of tax when ticking the check box of tax calculation in MIRO.BADI has method COPY_DRSEG_SELKZ but since there only importing paramters and no exporting or changing parametrs you cannot change the values of rseg here.
Try using proper Implicit enahncement by debugging .
For implicit enhancement check
Re: How do we search enhancement point/section
Edited by: Gautam Totekar on May 29, 2009 5:56 PM -
How Create new Tax code in Purchase order
Dear Sir,
I have creat new tax code in Purchase order
Basic value 3976876.53
Ex Duty 10% 397687.6525
edu.cess 2% 7953.75305
s&h Edu.cess 1% 3976.876525
Toatal 4386494.81
CST 1% 43864.94807
Addition 12550.00
i have all ready tax code 1021+5vatHi Sneha Patel
Case1:
If tax is applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing procedure (Tocde M/08) before the net value is calculated in ur pricing procedure so that it is taken for tax calculation.
Case2:
If tax is not applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing procedure (Tocde M/08) after the net value is calculated in ur pricing procedure so that it is not taken for tax calculation.
For both the conditions select
Cond. class A Discount or surcharge
Calculat.type B Fixed amount
Cond.category B Delivery costs
Also mark as a header or item condition with accruals checked.
If u are not sure then copy FRA1 condition in STD and change Calculat.type as B Fixed amount instead of % in FRA1 so that u can enter the amount directly in PO.
Also mark these conditions as manual in ur pricing procedure so that these can be entered manuall in PO if reqd.
While creating PO u can select the reqd condition (with or without tax) under conditions tab and enter the amount.
hope it clears ur issue
Chk and revert
Reg
Raja -
Rounding value for purchase order quantity
Hi Guru ,
i need help for logic LOT SIZE MRP.
In particolar i need of use the parameters of rounding for create the planned order multiple of the value.
Example for a requirement of 3800 pz whit a value rounding of 500 i vould want that the system create a planned order of the 4000pz.
I have tried insert this value 500 in the field "Rounding value for purchase order quantity" in the view MRP1 but after run MRP the system create a planned order of the same quantity of the requirement.
Thanks a lot for help
Daniele
PP TEAMDear,
OMI4, for lot size select Lot for lot order qty with rounding.
Either you can use the Rounding Value or you can use a Rounding profile in MRP2 view to round of your order qty and rouding value in MRP1 view.
Further you can check
Check FM MD_ROUNDING_VALUE
Regards,
R.Brahmankar -
Tables for VAT or CST and RATE OF TAX for a PURCHASE ORDER
i am developing a report(abap ALV)
i need to display the VAT or CST and RATE OF TAX for a PURCHASE ORDER that has been posted .
which tables to refer?hi kumar gaurav
Check KONV table..
based on Condition TYpe you can get...
Regards
Deva -
Output Tax Code In Purchase Order
Hi all,
It's possible to assign an output tax code to a purchase order?
The system gives me the error message 6164 'Please enter an input tax code, not an output tax code' when I use an output tax . Is there any customization to allow output taxes in purchase orders?
Thank you,
RSDear friend...
You cannot use output tax code in purchase order, since output tax codes are used only for sales. If you use output tax code in the PO it will obviously throw the error you said. If you want to have the taxes as shown in the output taxes, if not present in your input tax codes, you can create new tax code which you desire. Output codes are only for the Sales Order.
Hope it helps re-ward if so
Suraj -
Excise duty, tax, ECS values in Purchase order - Reg
Hello friends,
Please let me know from which table having Excise duty ,Ecs and Tax value of a purchase order can be retrieved.
Thanks & Regards,
Hari Prasath.SAt the Time of Po KONV is the Tabel
After GRN J_1IEXCHDR (Header Data) Excise Invice
J_1IEXCDTL (Line Item) of Excise invoice
Regards
Biswajit -
Automatic Calculation of Input Tax in a Purchase Order
Hi SAP Gurus!
Good day! Please help with my problem. During my creation of a Purchase Order, I will have to indicate what Tax Code to use. In this case, I use "Input Tax 12%". On the Item Condition TAB, the calculation of the input tax is not reflected. How can I customize this, in order for us to see the breakdown of Taxes automatically?
Thank you.
MikHi Mik,
If you maintain the tax codes in the system for your company code then the tax codes will be picked automatically in PO through FTXP and the same is reflected in PO.In Invoice tab you have to give tax code, then in Condition tab, the values will be calculated as per the condition values maintained for the tax code.No need to maintain any thing in pricing procedure.
If your tax procedure in TAXINN, you have to maintain the condition records for the condition types ( JMOP, JEC1, JSEP etc..), then only the values can be shown in PO in Condition tab.In TAXINN, the tax code has to be assigned to the company code.
Regards,
Gangadhar Y -
Reg:Tax Table In Purchase Order
Hi All,
In the Purchase Order Line Item Level We will Give Tax I.e In the Invoice tab We have our required tax codes the the taxes button will enable when we click taxes all the taxes will come my question is coils anybody say in which table all the tax details for a Purchase Order is Stored? i have checked the table KONV
only the Header Conditions is Stored in that table.could you please help me?Hi Vijetasap,
i have tried that function module it doesn't return the values thats y i asked the table name, i have attached the code for my reference just correct me where am wrong?
LOOP AT I_EKPO.
clear taxcom.
CLEAR : I_KOMV.
REFRESH : I_KOMV.
SELECT SINGLE *
INTO t001
FROM t001
WHERE bukrs = ekko-bukrs .
taxcom-bukrs = i_ekpo-bukrs.
taxcom-budat = ekko-bedat.
taxcom-waers = ekko-waers.
taxcom-kposn = i_ekpo-ebelp.
taxcom-mwskz = i_ekpo-mwskz.
taxcom-txjcd = i_ekpo-txjcd.
taxcom-shkzg = 'H'.
taxcom-xmwst = 'X'.
IF I_EKPO-MTART = 'HAWA'.
taxcom-wrbtr = i_ekpo-kzwi6.
ELSEIF I_EKPO-MTART = 'ROH'.
taxcom-wrbtr = i_ekpo-kzwi4.
ENDIF.
ELSE.
taxcom-wrbtr = i_ekpo-zwert.
ENDIF.
taxcom-lifnr = ekko-lifnr.
taxcom-land1 = ekko-lands.
taxcom-ekorg = ekko-ekorg.
taxcom-hwaer = t001-waers.
taxcom-llief = ekko-llief.
taxcom-bldat = ekko-bedat.
taxcom-matnr = i_ekpo-ematn.
taxcom-werks = i_ekpo-werks.
taxcom-bwtar = i_ekpo-bwtar.
taxcom-matkl = i_ekpo-matkl.
taxcom-meins = i_ekpo-meins.
taxcom-ebeln = i_ekpo-ebeln.
taxcom-ebelp = i_ekpo-ebelp.
IF ekko-bstyp EQ bstyp-best.
taxcom-mglme = i_ekpo-menge.
ELSE.
IF ekko-bstyp EQ bstyp-kont AND i_ekpo-abmng GT 0.
taxcom-mglme = i_ekpo-abmng.
ELSE.
taxcom-mglme = i_ekpo-ktmng.
ENDIF.
ENDIF.
IF taxcom-mglme EQ 0.
taxcom-mglme = 1000.
ENDIF.
taxcom-mtart = i_ekpo-mtart.
IF NOT TAXCOM-mwskz IS INITIAL.
CALL FUNCTION 'CALCULATE_TAX_ITEM'
EXPORTING
ANZAHLUNG = ' '
DIALOG = ' '
DISPLAY_ONLY = ' '
INKLUSIVE = ' '
I_ANWTYP = ' '
I_DMBTR = '0'
I_MWSTS = '0'
I_TAXCOM = taxcom
PRUEFEN = ' '
RESET = ' '
IMPORTING
E_NAVFW =
E_TAXCOM = taxcom
E_XSTVR =
NAV_ANTEIL =
TABLES
T_XKOMV = i_komv
EXCEPTIONS
MWSKZ_NOT_DEFINED = 1
MWSKZ_NOT_FOUND = 2
MWSKZ_NOT_VALID = 3
STEUERBETRAG_FALSCH = 4
COUNTRY_NOT_FOUND = 5
OTHERS = 6
.Note: Am not given Full Code but this is the part where am getting the tax values. -
Invoice non deductible tax amount vs Purchase order
In the purchase order the tax amount is calculated item by item (ME21N). In the invoice (MIRO) when we select flag Calculate tax the system calculates the tax amount for the total of all the items. Because of this system behaviour in the invoice verification sometimes we obtain small differences.
These differences should not exist specially when we are using a non deductible tax that affects the material valuation with the goods receipt and has to be corrected in the moment of the invoice verification.
Why does the system have a different behaviour from the purchase order to the invoice?
What can be done?
Best regardsDear Biju K
Whatever you mentioned about condition NAVS is there in system.
I am not adding tax code in PO, referring your earlier email I am asking that.
For adding other element I have not asked anything here, only to clarify your statement
You need to cross check why non-deductible tax amount needed in your PO with NAVS condition type and its purpose.
I explained this.
My question is simple that in one PO I am getting non-deductible tax but if I change vendor for the same material I am not getting non-deductible tax in condition tab ? I am not able to understand why its happened ? If one PO shows means there are chances that basic configuration is correct but may be somewhere something is wrong, I want to find out that. If you can throw some light on that its helpful for me.
regards
Nitin -
Unable to get the tax value in Sales order
Hi Forum,
I am preparing a sales order for a customer with a material.
When I go to the item conditions tab, I see that the correct tax value is being calculated but that tax value is not appearing in the TAX field.
Net value is appearing correctly in the NET field.
Please help me which are the areas of concerns i should look for to get the tax amount in the TAX field.
Many thanks.
Regards,
SheetalDear Sheetal
Go to V/06, select the tax condition type and execute. There check whether you have maintained "Condition Class" as D. If not, maintain D and then retry.
thanks
G. Lakshmipathi -
BAPI for updating tax code for purchase order..
Hi friends,
I have one requirement to change tax code for multiple Purchase order but the
thing is they should not go for release.So what should I prefer BDC or BAPI.
I am thinking to implement it through BAPI, but I don't know what procedure to follow.
If somebody can provide me a small guiding steps or code then it will be very helpful for me..
Thnaks in advance..
Useful answers will be rewarded with points....
Regards,
Rajesh AkarteHi Friend,
BAPI_ACC_PURCHASE_ORDER_CHECK Accounting: Check Purchase Order
BAPI_ACC_PURCHASE_ORDER_POST Accounting: Post Purchase Order
MEWP BAPIs Purchase order
BAPI_PO_CREATE Create Purchase Order
BAPI_PO_GETDETAIL Display Purchase Order Details
BAPI_PO_GETITEMS List Purchase Order Items
BAPI_PO_GETITEMSREL List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_GET_LIST List Purchase Orders - Only up to 4.0A
BAPI_PROCOPERATION_GETCATALOGS Determine Valid Catalogs as Value Help
BAPI_PROCOPERATION_GETINFO Analysis of Objects to be Generated in Purchasing
<b>AND</b>
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions. Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level. Search for the transaction ME21.Double click on ME21. Then search for TaxCode
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions.
A2: Go to IMG.
Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level.
Search for the transaction ME21.Double click on ME21. Then search for TaxCode. It is advisable to configure also the info record. The tax code should be a required entry, and whatever you specify here will be the default value in the Purchase order.
Materials Management -> Purchasing -> Purchasing info record -> define screen layout.
When you get here you search for the transaction ME12 ,double click here; search for Input VAT indicator.
Regards ,
Kumar. -
How to create VAT tax condition in Purchase order
Hi Experts,
My client has a requirement to put VAT (Value added tax) as condition in the PO. There shall be two different condition one for VAT deductable and the other for VAT non deductable.
The VAT deductable should have its impact at the time of MIRO as recoverable condition type.
So please kindly explain how to address this senario for VAT deductable. The client do not have CIN implemented.
Regards,
MGHi Moharghosh,
Go to - Spro->Financial Accounting (New)->Financial Accounting Global Settings (New)->Tax on Sales/Purchases->Basic Settings->Check Calculation Procedure->Define Condition Types
here define two condition types for VAT Deductible and VAT Non deductible.
Then assign both the above created condition types in you tax procedure as per the calculation.
Please make sure that you assign the exact transaction event key under Account Key field in Tax Procedure against VAT Dedu. and VAT non Dedu..
For VAT Non Deductible - You can use NVV.
For VAT Deductible you can create your own transaction event key in the below path - Spro->Financial Accounting (New)->Financial Accounting Global Settings (New)->Tax on Sales/Purchases->Basic Settings->Check and Change Settings for Tax Processing
Hope this will help you.
Thanks and Regards,
Neeraj -
How to print Excise values in Purchase Order Smartform
Hi, Experts,
I am developing the Purchase Order Smartform as per the my client requirment. For this i took the copy of standard Smartform for PO. The name of the standard smartform is 'YBIN_MMPO'. My requirment is to print all the excise values {BED,CESS,ECESS and VAT/CST} of every item. How to get these conditions to print in PO. I serched the table KONV, but the conditions which are under the taxes button are not stored in this table.
For this I found one FM "CALCULATE_TAX_FROM_AMOUNT'. This is also not helpful if client goes to manual excise to create PO.
Is there any other table to get these conditions? or is there any function modules to get these conditions?
Please give me the solution.
Thanks & regards,
Jagadeesh.Hi,
I used this piece of code to get the excise values in PO.
SELECT SINGLE * FROM EKPO INTO
W_EKPO
WHERE EBELN EQ IS_EKKO-EBELN AND
EBELP EQ <FS>-EBELP.
CALL FUNCTION 'J_1I4_COPY_PO_DATA'
EXPORTING
Y_EKPO = W_EKPO
EXCCOM =
CALL FUNCTION 'CALCULATE_TAX_FROM_NET_AMOUNT'
EXPORTING
i_bukrs = <FS>-BUKRS
i_mwskz = <FS>-MWSKZ
I_TXJCD =
i_waers = IS_EKKO-WAERS
i_wrbtr = <FS>-NETWR
I_ZBD1P = 0
I_PRSDT =
I_PROTOKOLL =
I_TAXPS =
I_ACCNT_EXT =
IMPORTING
E_FWNAV =
E_FWNVV =
E_FWSTE =
E_FWAST =
tables
t_mwdat = ITAB_TAXDATA
EXCEPTIONS
BUKRS_NOT_FOUND = 1
COUNTRY_NOT_FOUND = 2
MWSKZ_NOT_DEFINED = 3
MWSKZ_NOT_VALID = 4
KTOSL_NOT_FOUND = 5
KALSM_NOT_FOUND = 6
PARAMETER_ERROR = 7
KNUMH_NOT_FOUND = 8
KSCHL_NOT_FOUND = 9
UNKNOWN_ERROR = 10
ACCOUNT_NOT_FOUND = 11
TXJCD_NOT_VALID = 12
OTHERS = 13
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
regards,
Jagadeesh T.
Maybe you are looking for
-
Hello I made a script to install the plugin because it needs some libraries to be installed as well, but during the installation, the filter directory isn't defined (it isn't the same for each platform or language) for example my filter folder is : E
-
Firefox opening links into certain applications
Is it possible to make Firefox open certain links in other installed applications? for example open the Google play application link into the Google play, not in Firefox.
-
Why does iPhone 4 delete mms after reply
My wife's 4 deletes mms photo messages recieved in a 3 person group when someone else replies. ie: our son sends baby picture to both of us from his 4s. I reply " great looking kid" from my 4s. Photo disappears from wife's phone. Any ideas?
-
How do I get calendar items entered on my iPhone5 to sync to my Mac desk top? The sync seems to omly work from computer to phone.
-
App Catalog - can't see paid apps (unl Pre Plus (AT&T) in Canada)
I have an unlocked Pre Plus (AT&T). I used a Telus (Canada) 3G SIM to perform the unlock (code was provided when I got it), and after fixing the carrier settings db3 file, I've got it running on Telus' 3G network. Phone and data work great, but I ca