Reg. CIN Details not come for particular user

Dear All
For one user the CIN details is not come when create vendor in vendor master XK01. what is the problem.
I used Tc OMT3E,this code is directly access the configuration,but I think there is another one way to bring the CIN Detials in vendor master. Pls help me.
Thanks
Rajj

Hii,
Do the below specified configuration:
Goto
SPRO -> Logistics General -> Tax on Goods movement -> India -> Master Data -> Assign Users to Material Master Screen Sequence for Excise Duty
1. Double-click User Screen Reference.
2. Assign all users who need to see the excise duty information to the screen reference in the Vendor Master.
In the creation mode or change mode you can find the CIN Details icon in the header screen
Hope this clarifies
Regards,
Kumar

Similar Messages

Reg. CIN details not come during vendor creation

Dear All
I create one new user in SU01 refering the existing user(copy) who has all rights,but the newly created vendor has no CIN details tab, After added the user name at OMT3E that CIN details comming. Whereas in our company there are 30 users ,but there are 3 to 4 users only has been added in OMT3E. I think there is another one place where something has to do.
Please help me.
Rajj

hi,
check for urs Z* developed transaction code.
OMT3E is the place where we mention the user id normally.

CIN details icon in Customer master not coming for particular user

Hi experts,
I created new Dev user in that if i create a new customer code through Trxn code XD01 i am not getting the
CIN master maintenance Icon.Pls provide your guidance to solve this.
Awaiting for your valuable reply.
Regs.
SR

Hi,
Go to OMT3E (The menu path: SPRO >> Logistics General >> Tax on goods movement >> Master data >> Assign users to Material master screen u2026)
Click on u2018Users Screen referenceu2019; add the new user name here. Hereafter the user will get CIN details.
Regards,
K Bharathi

Mysite is not opening for particular user

Hi,
We have configured User profile service application with permission to create mysite in our environment. One particular user is not able to open mysite. When try to open mysite it generate an unexpected error message and given correlation ID. When followed
the log file with reference to correlation ID. I found following error in ULS.
My Site: PersonalSpaceRedirect: Unknown error: System.Threading.ThreadAbortException: Thread was being aborted.
at Microsoft.SharePoint.Portal.WebControls.PersonalSpaceRedirect.RedirectToPublicPage(SPWeb web)
at Microsoft.SharePoint.Portal.WebControls.PersonalSpaceRedirect.LoadControl(Object sender, EventArgs a).
Please notice that this is for a single user so we dont to recreate the user profile service application for restore database. Any help is higly appreciated.
Regards,
Jitu

I am having the same issue. I traced it to a problem with the Microsoft.SharePoint.Portal.WebControls.PersonalSpaceRedirect part on default.aspx. I'm still not sure what the underlying issue is, though. This is in SharePoint 2013 SP 1.

HRMS Dashboary is not woking for particular user

Guys,
oracle 11.5.10 hrms version,
We have created responsibility for hrms Dashboard,then we have attached this responsibility with different user but some of them woking fine but the rest of is not woking and getting Error - "You do not have access to this report",
Could you please advice.
thanks..

resloved the issued.

Reg:tasks are not getting displayed in the uwl mss for particular user

hi all
Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
Thanks in advance.
Deepika

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

IW32- order-print is giving error for particular User.

Dear Friends,
IW32- order-print is giving error for particular User and output type. Debugging authorization restricted on the system, hence I canu2019t trace out the problem. If anybody comes across such issues, please reply to the post.
Thanks In Advance for your reply.
Anil Dasari
Thanks In Advance.

Hi,
Information about dump:
1. User and Transaction:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06.05.2011 10:47:40
     MM Used. 13116304
     MM Free. 3639760
User and Transaction
     Client.............. 700
     User................ "BLADEF01"
     Language key........ "N"
     Transaction......... "IW32 "
     Transactions ID..... "4DC387ECA12B684DE10000001A5B1803"
     Program............. "/MRSS/SAPLRSG_PM_ORDER"
     Screen.............. "SAPLCOIH 3000"
     Screen line......... 33
Information on where terminated
     Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
      "/MRSS/RSG_MAINTAIN_MRS".
     The main program was "SAPLCOIH ".
     In the source code you have the termination point in line 441
     of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
2. Info. Where it got terminated.
Information on where terminated
    Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
     "/MRSS/RSG_MAINTAIN_MRS".
    The main program was "SAPLCOIH ".
    In the source code you have the termination point in line 441
    of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
3. How to correct the error.
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "/MRSS/SAPLRSG_PM_ORDER" or "/MRSS/LRSG_PM_ORDERU04"
    "/MRSS/RSG_MAINTAIN_MRS"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1.1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2.2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3.3. If the problem occurs in a problem of your own or a modified SAP.
I have been searching for notes recently implemented for IW32.
Thanks and Regards,
ANIL DASARI

Want Transaction History for Particular Transaction for Particular User. .

Hello Friends,
I have one query.
I want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
One USER_ID in SAP Server is shared among 6-7 people to do their work.
So, I want to know that from which terminal that user has run that transaction to do its work on particular Date/time.
I tried STAT, STAD, ST03N, but did not help me very much to get deep level information.
May be, i am missing something to get the solution for this kind of situation.
Any Solution for this kind of Situation ?
I am waiting for your valuable Response.
Regards,
Bhavik Shroff

I want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
ST01 will give you the Result after switching on the TRACE. I want to get Transaction History for a particular DAY/Weeks/Month .
e.g.
One User Id is shared among 6-7 people. One of the person did something using FB08 transaction on last 08/07/2008. But, as the User ID is shared among several User, How can i know the person who did that change and from which place/Terminal.
See,
I have the following information to fire the search.
-> User Id information
-> which transaction he/she used to do that work
-> When he did the change for something (means i know the exact date)
But , I want to know ,from which Terminal he/she executed that transaction, as the User ID is shared among several people.
You tell me the way ,so that i can have total required information for this kind of situation.
If i am wrong at any step , then let me know.
Regards,
Bhavik Shroff.

Prohibit traffic for particular users ASA5505

Hi Community.
I've read following guide how to use MPF and Regex.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
What my question is how should the ASA know which user is now surfing in the web. Does the IE or Mozilla sends the usercredentials in the webstream ? How can the ASA extract from the HTTP traffic which user is now surfing.
Is MPF and Regex really working to prohibit traffic for particular users?
I dont think so, the only solution in my opinion is to use a proxy server.
Thanks guys and kind regards

Hi Patrick,
I think you answered your question from the start. ASA's can do deep HTTP inspection by inspecting MIME types and looking for REGEX strings. However, like you pointed out, unless that string specifically has the user credentials or you can implement a REGEX to pull a consistent string your not going to be able to proxy your user traffic.
I have implemented HTTP Inspect Policy-Maps to restrict access to specific sites and I implemented the REGEX syntax to pull the URL strings. I have only implemented on very rare occasions in the event the client didn't have a proxy and specific comprimise was communicating to a site or entity that had multiple Layer 3 destinations.
thanks.

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

ACL is not enabled for this user OSX 10.5

I am running OS X 10.5 on a Mini Mac.
It was a clean install, everything went smoothly except for configuring the mail server.
I created my users as I normally do using Workgroup manager.
However 2 out of 3 of users I created can not log into the IMAP server.
You get the error message ACL is not enabled for this user.
What is the ACL and how do I enable it ?
Thanks
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user

Hi there
I had the same problem and I found this post which fixed it:
http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
Hope it works for you too!
Chris

Thousands of "mail is not enabled for this user"

Someone is sending my domain email to thousands of non existent mail accounts. It's like they are combining every possible prefix to my domain they know of. It's been going on for weeks. The Mail service, however, is not being brought down by this at all. So I don't know what kind of attack this is or how to stop it.
Can someone help me? Below is a minute section of my System log:
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
------------------

Two possibilities - both fall under the heading 'reconaissance by e-mail'. A spammer or hacker will try 1000's of common names, then look at which ones didn't bounce to determine which ones have accounts on your system.
They then have a comprehensive list of account names on your server, and can proceed to attempt likely passwords for each, or send endless spam to your users. Either one is a Bad Thing, doubly so if you've got any accounts that you created just to test things, and have weak passwords, but you've always counted on nobody knowing they exist.
At one point, I actually had a 'testuser' account that had 'testuser' as the password - I just hadn't remembered to delete it after I was done testing. It's very common for a system to have a couple of these hanging around. I didn't have trouble with it, but looking for and getting rid of these is critical.
Either way, the immdiate solution is to go Server Admin->Mail->Settings->Relay, and add the IP address(es) of the senders to the 'Refuse all messages from these hosts or networks' section. Mail attempts will still show up in your SMTP log, but they'll look like this one I got this morning (one of dozens):
Jan 3 11:07:33 miniserver postfix/smtpd[1440]: NOQUEUE: reject: RCPT from unknown[66.180.115.17]: 554 <unknown[66.180.115.17]>: Client host rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<xptwfs.gov>
Next is to take a look at your password policies - if you've got strong password policies (must include characters and numbers, must be 7 characters or longer, etc., you're probably OK, but if anyone has weak passwords, or god forbid, uses their userid as their password, you're pretty vulnerable.
It's also worth noting that someone with a full list of your users has a fair number of tools for improved odds of phishing, or spear-phishing, where they create finely targeted mails that say things like 'Bob Smith told me to contact you for your password', and look very real. A warning mail to your users to remind them that they need to keep passwords secret, and be cautious about mail, even if it appears to know something about them, would be good. I wouldn't specify that you've been recon'd, just a general 'New Year Security Reminder' or some such.
Hope this helps!

Lock a tcode for particular user

Hi Experts
i need to lock few transaction for particular users only. we have n number of roles and the transactions have been assigned to some tcodes to be reasticted for a list of users. is there any method or program to built to restrict the users for few tcodes.is there any more query pl trigger me
regards
bala

hi
sagar:
as you said if i start creating roles to restrict some users then there atleast 25 tcodes are there to restrict and 120 roles are to be analyzed and the job becomes hefty by creating roles and there will too many number of roles and it becomes confusion in future forecast. there fore i nedd any suggestion like that the userscan be restricted when they are trying to access that particular code or lock the screen or inform them to not access these tcodes thro some message or writing a program to restrict the users while the user exits. i have an idea but i dont know how it will work - ( I am not a ABAPER) there should be tcode or program which should list tcodes authorized for particular users and where they can be locked like SM01 ( but it will lock for all) but locking for particular users
Am i more advanced??
regards
bala

Menu Exclusion for particular users

Hi All,
I don't think there is a way for my requirement but still want to check with you all if I can get any other solutions for this.
For a custom responsibility can we exclude the Menu items for particular users. For example the menu items are Reports1, Reports2. User1 should only have access to Reports1 and user 2 for Reports2. Can we do it by any profile options or how to achieve this.
Any help would be appreciated.
Thank You!!

Hi,
Can you please confirm whether you wish to exclude menu or reports.
But anyway that being requested, if you wish to exclude a specific menu only to a particular user whilst having them to other user is not possible unless you create a different menu and assign it to a new responsibility and then assign it the user.
The same is applicable to the reports, but the same layout should be followed on request groups.
Thanks &
Best Regards

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

Reg. CIN Details not come for particular user

Similar Messages

Maybe you are looking for