Reg, Documentation for a  New Implementation using ASAP  Methodology

Hello,
Will you pl, help me in getting complete documentation (Std / Template)for all stages of ASAP methodology, for a new module. If you provide at least URL, it will be of great help.

Hi Rao,
The ASAP Methodology has five phases:
1. Project Preparation – project formally initiated and planning well under way.
2. Business Blueprint – project team gathers requirements and conducts conceptual design of the solution.
3. Realization – system solution is built and integration tested, end users trained
4. Final Preparation – final check before cut over to new system solution
5. Go Live & Support – solution confirmation, on-going support in place and project closing
http://media.sdn.sap.com/html/submitted_docs/Implementation_Roadmap_XI/index.htm
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000420636&_SCENARIO=01100035870000000202
http://www.misa.bc.ca/docs/pdfs%2FMISA%20NEWS/Making%20ERP%20Work%20for%20Small%20Government.pdf
Hope this helps...
Best Regards,
DMK
*Assign points if it serves your purpose...

Similar Messages

  • R/3 security implementation using ASAP

    Hi,
    We have to implement the R/3 Security and Authorization part for a new project.
    We have decided to use ASAP methodology.
    Kindly help me decide what steps for Authorization n Role build would fall under the following ASAP steps:
    1 Project Preparation
    2 Business Blueprint
    3 Realization
    4 Final Preparation
    5 Going Live
    Also, can for some other methodology?
    Thanks in advance.

    Gautam,
    You can download ASAP here:
    https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000420636&_SCENARIO=01100035870000000202
    That will give you access to the whole roadmap & you will be able to see all the relevant security tasks & activities for each of the steps (they are flagged as security so easy to spot)
    If your company is using ASAP then you will also be able to see it in the Solution Manager instance that they are running it from.

  • What does FDS stand for in new implementation?

    What does FDS stand for in new implementation?
    Thanks,
    Jess...

    Functional Development Specifications
    Some variations:
    FS - Functional Specification
    HLDS - High Level Development Specification
    FD - Functional Development
    etc.
    Basically it is documenting how the business requirement is in preparation for development.
    The above is typically further translated into TS - Technical Specification.

  • XI Project plan using ASAP methodology

    Hi All,
    I need to write a XI project plan / scope documents using ASAP methodology.
    Could you point me to the sample documents?
    Thanks,
    Prasad
    Message was edited by:
            Prasad
    Message was edited by:
            Prasad
    Message was edited by:
            Prasad

    Hi can anyone send me the id, password to this id [email protected] for viewing the
    ASAP Implementation Roadmap for SAP Exchange Infrastructure"
    or else if you have a sample document that suffices my learning need. Either pdf or word what ever  it is.
    I deeply in debt for this favor.
    Anil.
    The following link is not getting accessed by me.
    [http://service.sap.com/~sapidb/011000358700004874282004E]

  • Regarding Doc, for a New Implementation

    Hello,
    Will you  pl, help me in getting complete documentation (Std / Template)for all stages of ASAP methodology, for a new module. If you provide at least URL, it will be of great help.

    Did you try our SAP HELP Portal. This might help you as a overall process
    http://help.sap.com/saphelp_sm40/helpdata/en/ae/64c33af662c514e10000000a114084/frameset.htm
    --Ragu

  • Reg, Template for a New Project

    Hello,
    Will anyone can guide me to create a Template for SD Module. If anyone can send an URL / doc, that will help me a lot.
    [email protected]

    Hi Rao,
    The ASAP Methodology has five phases:
    1. Project Preparation – project formally initiated and planning well under way.
    2. Business Blueprint – project team gathers requirements and conducts conceptual design of the solution.
    3. Realization – system solution is built and integration tested, end users trained
    4. Final Preparation – final check before cut over to new system solution
    5. Go Live & Support – solution confirmation, on-going support in place and project closing
    http://media.sdn.sap.com/html/submitted_docs/Implementation_Roadmap_XI/index.htm
    https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000420636&_SCENARIO=01100035870000000202
    http://www.misa.bc.ca/docs/pdfs%2FMISA%20NEWS/Making%20ERP%20Work%20for%20Small%20Government.pdf
    Hope this helps...
    Best Regards,
    DMK
    *Assign points if it serves your purpose...

  • Wanted: PXI-2530 for sale, new or used

    PXI-2530 is obsolete. I like to buy new or used if anyone is selling. Please note, I am looking for PXI-2530 and not PXI-2530B
    Solved!
    Go to Solution.

    http://www.artisantg.com/TestMeasurement/75929-2/National_Instruments_PXI_2530_High_Density_Multicon...
    These guys have them

  • I have an open case. I can't get a response from Adobe. My computer was hit by lightening and cannot be repaired. It had Photoshop on it. I want to get a copy of Photoshop for my new computer using the serial

    My computer that had Adobe Photoshop CS6 on it was hit by lightening and cannot be repaired. I want to get a copy of Photoshop for my new computer. I have an open case, but I cannot get Adobe to respond to it. I have sent the serial# and a copy of the license. Every time I try the chat function to get help, I get dropped with the message "chat is no longer available." I WANT MY PHOTOSHOP!

    This is a user forum, not a channel to address Adobe. As your fellow users and volunteers, we'll be happy to help you if we can.
    You can download the CS6 trial version just like anybody else.
    Once you download it, you can install it, input your serial number, register it and apply all necessary updates.
    An alternative, if you know how to access your Adobe account, under My Products you'll find your Photoshop CS6 registration, next to which you should find a link to download CS6 if you originally bought it as a download

  • New implementations using core java in a project in RMI

    hi, M a final year engineering student in Comp science.i wantu do a project of nearly 400hrs,can any one pls tel me the new things tat i can implement in RMI in LAN environment..most of the things i ve thought of ,were found to be pretty old.pls give ur suggestions.its as bit urgent.
    Thankyou,

    hi, M a final year engineering student in Comp science.i wantu do a project of nearly 400hrs,
    can any one pls tel me the new things tat i can implement in RMI in LAN environment..
    most of the things i ve thought of ,were found to be pretty old.
    pls give ur suggestions.its as bit urgent.
    Thankyou,http://www.catb.org/~esr/faqs/smart-questions.html#writewell
    How To Ask Questions The Smart Way
    Eric Steven Raymond
    Rick Moen
    Write in clear, grammatical, correctly-spelled language
    We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
    So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal - in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
    Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
    More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

  • Reg.Documentation for ECC 6.00

    Dear Experts
    We are going to 4.7 to ECC 6, we want documents and MM configuration guide. And also upgrading AFS. I have no idea. Any one help me.
    Thanks
    Rajkumar.K

    Hi,
    Refer following link for MM Scenario (BPP, Configuration, etc...)
    [SAP Best Practices Baseline Package India V1.603|http://help.sap.com/bp_bl603/BL_IN/html/scope/Scoping_offline.htm?display=STE-BL_IN_V1603+ENTRY_LEVEL_MANUFACTURING.xml]
    Here Click on P2P i.e. Procure to Pay and then select the sub components (Scenarios).

  • Implementing ASAP Methodology using SAP Solution Manager

    Hi All,
    Can any one help me with any documentation regarding ASAP methodology implementation using Solution Manager.
    The step by step process and transaction codes used for implementing it are there any guides provided by SAP for implementing the ASAP methodology in Solman.
    It's an implementation project that we would like to track each phase in Solman.
    Kindly help me to get more details.
    Thanks in advance.

    Hi,
    There are the 'ASAP Implementaion Roadmaps' wheras the latest available
    is the 'ASAP Methodology for Implementation 7.0' Roadmap, and there are
    the 'Upgrade Roadmaps' wheras teh lastest one of them is:
    'Upgrade Roadmap (V3.2)'.
    If you are on ST-ICO 150 SP24 both of these Roadmaps
    should be available in your system.
    There are two ways to display the roadmaps in RMMAIN.
    One is to choose a project in RMMAIN, then the roadmap assigned to
    the project in SOLAR_PROJECT_ADMIN is displayed.
    The other one is to display any available roadmap in the system
    To display one of the available roadmaps (without a project) choose
    the button 'Other Roadmap' in RMMAIN and in the upcomming popup
    hit the button 'No Project'.
    After that you should get an addtional button besides the Project
    button called Roadmaps (Other Roadmap).
    When you hit now this button you will get a list of all available
    roadmaps.
    Some further notes for referencing (although they can be old but still helpful)
    644651     How to find the Reference Model in Solution Manage
    826586     ASAP Implementation Roadmap
    Hope this helps.
    Cheers
    SH

  • ASAP Implementation using SOLMAN

    HI All,
    Can you please guide me if we can implement sap using ASAP methodology in SOLMAN?
    In other words can solman be a substitue for ASAP tools and download from CD?Or there is no substitute to ASAP software?
    Also guide me if solman can become a part of ASAP methodology if entire ASAP methodology is not possible using SOLMAN and in what phase of ASAP nethodology implementation  SOLMAN comes in picture?
    Thanks.

    Hello,
    Solution Manager has the similar functionality as ASAP, though instead of CD based it is Server Based set of tools and it is modern, while ASAP is old.
    You should look at SAP Methodologies at this link:
    https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000724820&_SCENARIO=01100035870000000202&
    Also look at RUN SAP and notice you can use ASAP Roadmaps : https://websmp102.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
    Here is a link to run SAP Roadmaps: https://websmp107.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
    Additionally this issue has already been discussed in thread: Difference between Solution manager and ASAP
    Regards,
    Paul

  • BI version to install for new implementation

    Hello,
    I am a technical consultant for a new implementation of BW with the requirement of SEM-BPS. We are considering installing NW2004s with BI Content 7.0. However since it is so new we are wondering about the stability. We are also not sure if we are losing any functionality with the latest version.
    My question is should we install the latest BI version or go with BW 3.5 which the consultants are familiar with and has been out there for a long time.
    Since BW 3.5 is part of Netweaver 2004, I believe it should be supported until at least 2010.
    Thank you, George Barta

    Hi:
    There are already more than 35 customers live on BI in SAP NetWeaver 2004s, with more than 500 active projects.
    You definitely should go with 2004s, as it can do everything 3.5 can do but so much more.  You can avoid an upgrade in the near term by simply starting with BI in SAP NetWeaver 2004s.
    You are not losing functionality with the new version.  As stated before, there is a 3.5 system "under the covers". 
    However, note that BI Integrated planning is the new version of the planning application.  SEM-BPS will continue to be supported going forward, but SAP will not invest in developing it anymore.  Instead, all development resources flow into BI Integrated planning.
    Both SEM-BPS and BI Integrated planning are available in BI in SAP NetWeaver 2004s, you can choose which one to utilize (and can have a mix of the two running in the same system).  Note that there are no automated migration tools between the 2. Would be good to take the SAP going forward plan into account when determining your strategy.
    Thanks for the points -
    Regards -
    Ron Silberstein
    SAP

  • Transactional Replication - Generate a snapshot for a new art only

    I will apreciate any help on this, thanks ahead!
    We are running the below script that works well for us at dev and other environments but when running on prod the generated snapshot is for all articles in the publication rather than the desired results, for the new art only.
    I have copied below the code being used.
    SET NOCOUNT ON; SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
    DECLARE @rc int, @publication sysname, @article sysname, @subscriber sysname, @destination_db sysname
    ,@delete_article_from_replication_configuration bit ,@debug bit = 1;
    SELECT @publication = N'MyPub'
    ,@destination_db = N'dest_database'
    ,@subscriber = N'MyServer'
    SELECT @article = N'MyArt'
    -- SET immediate_sync and allow_anonymous to false
    EXEC sp_changepublication
    @publication = @publication,
    @property = N'immediate_sync',
    @value = N'false';
    EXEC sp_changepublication
    @publication = @publication,
    @property = N'allow_anonymous',
    @value = N'false';
    -- add article
    DECLARE @error_message nvarchar(4000);
    IF NOT EXISTS (SELECT * FROM dbo.sysarticles a INNER JOIN dbo.syspublications p ON a.pubid = p.pubid WHERE a.name = @article AND p.name = @publication)
    BEGIN;
    EXEC @rc = sp_addarticle
    @publication = @publication
    ,@article = @article
    ,@source_owner = N'dbo'
    ,@source_object = @article
    ,@destination_table = @article
    ,@type = N'logbased'
    ,@creation_script = null
    ,@description = null
    ,@pre_creation_cmd = N'none'
    ,@schema_option = 0x000000000803100D /* 0x000000000803FFDF */
    ,@status = 16 /* 8 */
    ,@vertical_partition = N'false'
    ,@ins_cmd = N'SQL'
    ,@del_cmd = N'SQL'
    ,@upd_cmd = N'SQL'
    ,@filter = null
    ,@sync_object = null
    ,@auto_identity_range = N'false'
    ,@identityrangemanagementoption = N'manual';
    IF ( (@@ERROR <> 0) OR (@rc <> 0) )
    BEGIN;
    SELECT @error_message = ERROR_MESSAGE(); RAISERROR(@error_message, 16, 1);
    IF (@@TRANCOUNT > 0) ROLLBACK TRAN; RETURN;
    END;
    PRINT 'The article ''' + @article + ''' has been added to publication ''' + @publication + '''';
    END;
    -- add subscription
    IF NOT EXISTS (SELECT * from syssubscriptions WHERE dest_db NOT LIKE 'virtual' AND srvname LIKE @subscriber AND artid IN
    (SELECT artid FROM dbo.sysarticles a INNER JOIN dbo.syspublications p ON a.pubid = p.pubid WHERE a.name = @article AND p.name = @publication ))
    BEGIN;
    EXEC @rc = sp_addsubscription
    @publication = @publication
    ,@subscriber = @subscriber
    ,@destination_db = @destination_db
    ,@subscription_type = N'Pull'
    ,@sync_type = N'automatic'
    --,@sync_type = N'replication support only'
    ,@article = @article
    ,@update_mode = N'read only'
    ,@subscriber_type = 0
    ,@subscriptionstreams = 4;
    IF ( (@@ERROR <> 0) OR (@rc <> 0) )
    BEGIN;
    SELECT @error_message = ERROR_MESSAGE(); RAISERROR(@error_message, 16, 1);
    IF (@@TRANCOUNT > 0) ROLLBACK TRAN; RETURN;
    END;
    PRINT 'The subscription ''' + @subscriber + ''' for article ''' + @article + ''' has been created''';
    END;
    EXEC sp_changepublication
    @publication = @publication
    ,@property = N'sync_method'
    ,@value = N'native'
    ,@force_invalidate_snapshot = 0
    ,@force_reinit_subscription = 0;
    -- create snapshot
    EXEC sp_addpublication_snapshot
    @publication = @publication
    ,@frequency_type = 1
    ,@frequency_interval = 1
    ,@frequency_relative_interval = 0
    ,@frequency_recurrence_factor = 0
    ,@frequency_subday = 0
    ,@frequency_subday_interval = 0
    ,@active_start_time_of_day = 0
    ,@active_end_time_of_day = 235959
    ,@active_start_date = 0
    ,@active_end_date = 0;
    Yaniv Etrogi
    site |
    blog | linked in |
    mail
    Please click the Mark as Answer button if a post solves your problem! or
    Vote As Helpful

    Hello,
    1. Verify if you are using CONCURRENT or NATIVE method for synchronization by running the following command.
    Use yourdb
    select sync_method from syspublications
    If the value is 3 or 4 then it is CONCURRENT and if it is 0 then it is NATIVE.
    For more information check
    http://msdn.microsoft.com/en-us/library/ms189805.aspx
    2) Then add the subscription for this new article using the following command
    EXEC sp_addsubscription @publication = 'yourpublication', @article = 'test',
    @subscriber =‘subs_servername', @destination_db = 'subs_DBNAME',
    @reserved='Internal'
    If you are using the NATIVE method for synchronization then the parameter
    @reserved=’Internal’ is optional but there is no harm in using it anyways. But if it is CONCURRENT then you have to use that parameter. Else the next time you run the snapshot agent it is going to generate a snapshot for all the articles.
    Lastly start the SNAPSHOT AGENT job from the job activity monitor. To find
    the job name follow these steps.
    · select * from msdb..sysjobs where name like '%yourpublication%'
    · Right click on each of those jobs and find which one contains the step
    ‘Snapshot Agent startup message’. This is the job that you want to
    start from the first step.
    3. Verify that the snapshot was generated for only one article.
    Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

  • Documentation for Notifications system in iOS 5?

    Is there any detailed documentation for the new Notifications system in iOS 5 that explains how it works, and in particular how the various pieces (alerts, banners, the Notification Center, the lock screen) interact with each other?  I downloaded the latest User Guide for iOS 5.0 and it doesn't provide much detail at all.

    This may help:
    There are a number of issues to fix this:
    1. You cannot view the "Notification Centre" from the lock screen.
    2. You can have all your NEW notifications appear in your lock screen by changing the settings in Settings>Notifications>(and then select that app).
    3. You also have to ensure you are allowing notifications within the App itself, inside the App's settings.
    Here are a few hints:
    If you have the "Alert Style" set to "None" - they won't show up, even if you turn them "On".
    If you set to "Banners" they will show up as Banners while your phone is unlocked, and also as a Banner on the Lock screen (if the lock screen setting is set to "on"). From the lock screen you can "swipe" the notification, and it will take you right to that app.
    If you set as "Alerts" - it will require you to select an action before proceeding - in which case you must "unlock the phone", and the rest of any notifications on your lock screen will not longer be considered new - and won't show up again when you lock your phone.
    My recommendation: Set them all as Banners, and then you have more options. Once you "Unlock" your phone, all of them will be removed from your lock screen, but you can then see them in the Notification Centre.
    Some exmples:
    Facebook: you need to select Settings>Notification>Facebook. If you want your notifications from Facebook to show up on your phone, select "Notification centre: ON". Select the Alert Style. If you want to see them in your lock screen, turn "View in Lock Screen:ON." THEN, go to Settings>Facebook>Push Notifications, and select the ones you would like. They will show up on your phone.
    EMAIL: Settings>Notifications>Mail.If you want your notifications from your email accounts to show up on your phone, select "Notification centre: ON". Select the Alert Style. If you want to see them in your lock screen, turn "View in Lock Screen:ON." THEN go to Settings>Mail, Contacts, Calendars>and select the Mail Account you would like notifications for.. Depending on the account type you may need to change your "push or fetch" settings.
    TEXT: Settings>Notifications>Messages If you want your notifications from texts to show up on your phone, select "Notification centre: ON". Select the Alert Style. If you want to see them in your lock screen, turn "View in Lock Screen:ON." If you want to see the whole message, select "Show Preview: ON", "OFF will just display the name of the person who sent the text".

Maybe you are looking for