Reg:error during transfer order creation

hi,
after quality inspection i move the stock into warehouse integrated storage location. if i clear inspection lot in qa32 for a material after saving it will pop up express message"error during creation of transfer order for a material".i configured that after qc inspection automatic TR is created.i just proceed with manual.
its a issue related with workflow or configuration....i checked with automatic TO all the things are deactivated.....where i am missing
Thanks
Muthuraman.D

hi,
goto VOV8
choose your sales order type
transaction flow - variant (remove the transaction variant if any)
but this will remove the transaction variant(custom) which you created , it will take the standard variant for your transaction VA01
regards
senya

Similar Messages

User or SAP exit for Batch Status during Transfer Order creation

Hi All,
I would like to know if there's an user-exit or a SAP-exit available with which we could evaluate the status of a batch during the creation of a Transfer Order.
When a production order is created, the system creates automatically a transfer requirement with all the components needed for the production. This TR (Transfer requirement) is then converted into a TO (transfer order) with transaction LT04. Here, we want to control that the status of the batches is not restricted. Otherwise, the user shall not be able to save the TO.
Thanks in advance, I appreciate your feedback!
SS

Exit Name Description
MWM2S001 Exit to Determine 2-Step Picking Characteristic
MWMBAP01 Enhancement for BAPI WarehouseTransOrder.GetDetail
MWMBAP02 Enhancement for BAPI WarehouseStock.GetDetail
MWMD0001 Transfer order print via RLVSDR40
MWMD0002 Transfer order print as multiple process with RLKOMM40
MWMIDI07 Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11 Enhancement for message WMTORD: TO with several items
MWMIDO12 Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13 Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001 Enhancement WM/PP Interface (automatic TR generation)
MWMRF001 RF: Influence Display of material description
MWMRF100 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0100)
MWMRF101 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0101)
MWMRF102 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0102)
MWMRF104 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0104)
MWMRF105 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0105)
MWMRF106 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0106)
MWMRF107 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0107)
MWMRF108 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0108)
MWMRF151 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0151)
MWMRF152 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0152)
MWMRF153 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0153)
MWMRF170 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0170)
MWMRF202 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
MWMRF203 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0203)
MWMRF204 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0204)
MWMRF205 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0205)
MWMRF212 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0212)
MWMRF213 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0213)
MWMRF221 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0221)
MWMRF302 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0302)
MWMRF303 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0303)
MWMRF304 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0304)
MWMRF305 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0305)
MWMRF312 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0312)
MWMRF313 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0313)
MWMRF321 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0321)
MWMRF400 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0400)
MWMRF402 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0402)
MWMRF403 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0403)
MWMRF404 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0404)
MWMRF405 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0405)
MWMRF406 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0406)
MWMRF410 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0410)
MWMRF411 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0411
MWMRF412 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0412)
MWMRF502 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0502)
MWMRF503 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0503)
MWMRF504 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0504)
MWMRF505 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0505)
MWMRF600 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0600)
MWMRF601 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0601)
MWMRF630 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0630)
MWMRF631 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0631)
MWMRF632 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0632)
MWMRF633 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0633)
MWMRF634 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0634)
MWMRF650 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0650)
MWMRF651 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0651)
MWMRF700 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
MWMRF701 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0701)
MWMRF702 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
MWMRF703 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0703)
MWMRF704 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0704)
MWMRF705 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0705)
MWMRF760 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0760)
MWMRF761 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0761)
MWMRF762 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0762)
MWMRF763 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0763)
MWMRF764 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0764)
MWMRF765 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0765)
MWMRF766 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0766)
MWMRF767 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0767)
MWMRF768 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0768)
MWMRF769 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0769)
MWMRF777 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0777)
MWMRF800 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0800)
MWMRF801 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0801)
MWMRF802 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0802)
MWMRF803 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0803)
MWMRF804 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0804)
MWMRF805 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0805)
MWMRF806 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0806)
MWMRF807 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0807)
MWMRF888 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0888)
MWMRF889 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
MWMRF998 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0998)
MWMRF999 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0999)
MWMRFCOD Enhancement for function codedisabling
MWMRFDLV select delivery by user criteria
MWMRFPRT Enhancement for printing
MWMRFSSG user exit for sorting TOs in RF system-guided transaction
MWMRFUP Customer defined general purpose pushbutton called from scr.
MWMRP001 Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002 Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003 Customer Exit for Replenishment using RLLNACH1
MWMRP004 User Exit for Replenishment using RLLNACH4
MWMTO001 Enhancements for end of transfer order generation
MWMTO010 Exit: Calculation of Total Planned TO Processing Time
MWMTO011 Correction of Planned Processing Time for TO Item
Hi,
MWMTO012 Correction of Sorting and Split Transfer Order
MWMTO013 Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3 Separate selection of posting changes for autom.TO creation
MWMTR001 Exits at the end of transfer rqmnt creation (IM,PP interf.)
No of Exits: 104
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Regards,
Raj.

Error in transfer order creation for sto type-- bulk storage

Hi ,
Can someone help to solve the following issue, while doing the Transfer order -- " The error is --> Missing definitions for block storage control ( B1 GB 04 ) "
config settings done are
1. in material master, view Wm-2, the LE qty--> 1, un --> to, SUT --> GB
2. in material master, view Wm-1, stock removal strategies > 004 (bulk storage), stk plcmt strategies > 004 (bulk storage) and bulk storage-->04
Thanks & Regards
Amjad

Hi
Try with OMM4 for block storage control, Also Check the section check indicator in OMM4.

How to assign a queue during Transfer Order creation from code

Hi,
I am using FM 'L_TO_CREATE_MULTIPLE' to create a Transfer Order.
Is there a way to assign a Transfer Order to specific queue using this FM?
Regards,
Ladislav

Solved. Updated ltak table.

Error during Production Order creation

Hi All,
Our's is MTO scenario. We have maintiain Account Assigment Category as 'M' in Requirement Type. During creation on production order with ref to sales order system gives error "Account assignment cannot be carried out because of different origin no."
If I create the production order with ref to quotation system does not gives any error. But my requirement is to create the prod order with ref to sales order.
Please guide
Regardsd

Hi Bala,
In SPRO goto>Sales and Distribution> Basic Functions-->
Availability Check and Transfer of Requirements
-->
         Transfer of Requirements
-->
             Define Requirements Classes
             Define Requirements Types
-->      Determination Of Requirement Types Using Transaction
Determination Of Requirement Types Using Transaction
In the standard system, requirements types are determined according to a specific search strategy beginning with the material strategy group.
Strategy for Determining the Requirements Type
1. First, an attempt is made to find a requirements type using the strategy group in the material master.
2. If the strategy group has not been maintained, the system will determine it using the MRP group.
3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
Note
You can select an alternative search strategy in the 'Source' field, for example a transaction-related procedure for determining requirements type (source = 1 or 2).
Example
There are business transactions, such as consignment stock processing, in which the material with its planning characteristics is not important, rather the transaction itself. An issue from the customer's consignment stock should not trigger an availability check against planning at the plant as layed down by the planning strategy but rather against special stock.
Actions
1. Assign the item categories and MRP type to the requirements types.
2. Select an alternative search strategy in the 'Source' field if necessary.
By assigning the 1 or 2 to the Source you can have the requirements in MD04 refered to order instead of the initial source document which is usually quotation. If we don't assign this then the system by default refers to the initail document created i.e. Inquiry or Quotation whichever is the first document.
Regards,
Karthik.

Error during prdn order creation co01

Dear All,
During creation of production order by co01 a error message is generating i.e."13.05.2035 comes after end of factory calender" for some of my Fert materials only in one of my plants.Bom & Routings,Workcenters are valid for this FG & also for Sfg's which exists in as components in this fert material.At the time of availability check the system generates this error.Factory calender is valid for 2010 but if the error is due to validity of factory calender the system should generate error for all the Fert materials which we are producing in same plant which is not happening actually.The problem is for only a few of Fert materilas.Pls help suitable answer will be awarded with points.
Regards
R Sehgal

Hi Rakesh,
The problem i think should be in ur lead time for those materials for which the error is occuring.
See ur factory calender is valid up to 2010 but for some materials because of the order quantity and the lead time from routing its going beyond the 2010 ( means that order is getting scheduled beyond the2010) so it is giving the error.
Pls check the same and revert.
Regards,
Vinayak.

Error during return order creation in CRM online

Hi all,
When I create return order via transaction CIC0 with reference to standard order ( B2C ) then some times system gives error after saving the return order. The text of the error message is very confusing , It says"
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
<i><u>"Transmission log
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Document xxxxxxxxxx doesn't have document category but (Notification E V2 068)
Sales document xxxxxxxxxx was not changed (Notification E V4 219)"</u></i>
I have tried to replicate this return order with all the available tools but during save this message is coming from R/3.
Regards,

I would suggest you to try to create a return order in R3 system (from where the error is coming) with the same parameters.
Usually that should give you the same error... Resolve the issue, then try to create order in CRM online. Now error should not be there.
Regards,
Kaushal

Error during process order creation

while i create a process order following error is coming "recipe is empty"
please tell me where exactly i'm going wrong.

Dear Dhaval,
Welcome Back
Long time heard from you and nice to see your reply from long time
Good Luck !!!
Regards
Madhu

Error during Service Order creation

Hi,
I configure the Maintanance order for the plant and tried to create the Service ordeer for that Plant.
But system shows the Following Error Massage,
Field 'Additional Device Data' must still be filled
Can anybody guide me to proceed further on this
Thank You,
With Best Regards,
M.Suresh

Hi,
Thanks for your info PETEA.
Sorry Paul Meehan , I didn't see the field settings in OIAN properly last time.
There is a setting exist for field 'Additional data' as Mandatory. I removed this setting and tried to release the order and I succeeded.
Thanks Paul Meehan and PETEA for your Information.
M.Suresh

Error during purchase order creation

Hello friends;
System gives following error when i adopt already created purchase requsition.
"system error in routine F1_TAX_CHK_PRICING_DATA error code 13 function builder TAX 2."
Please help to solve this error.
Thanks in advance!!

Dear,
If you have access to OSS notes then please see:
400766 Changes in accounting interface and 112609 How are tax codes transferred to condition
Please check with FICO person.
TAX Procedure for the countrry for which ur working should be properly maintained inside OBQ3,
Regards,
R.Brahmankar

Error Handling for Background/Update Tasks (Transfer Order creation) - How?

Hi,
I have a standard process for creating a Transfer Order and 2 user-exits that I have implemented.
The user exits are used to transfer information during Transfer Order creation.
However, the user-exits also check data in table TVARV and other. As such, error handling needs to be implemented, since the T.O. might or might not go through, depending on data validation and related.
However, the user-exits are implemented during creation, which is an update task that runs in the background. This makes it impossible to output any information or error messages.
What else can be done in regards to outputting a message, since the user will need to see some sort of message that the process failed, that the T.O. didnu2019t confirm? Can an SAP inbox message be created and how?
Please help.
Thank You,
John

Hi,
Please check the following link for all the function modules and user exits on TOs.
http://help.sap.com/saphelp_erp2005/helpdata/EN/c6/f83a294afa11d182b90000e829fbfe/content.htm
Reward points if it was helpful.
Regards
Abhishek
Edited by: Abhishek Raj on May 29, 2008 10:20 AM

Update error in RV_SALES_DOCUMENT_ADD during Sales order creation

I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
Am I missing any configuration parameters?
Thanks,
Chitra

Yes , I can see the error in ST22.
While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
- I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
    Analysis of error shows:
     Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
      Fails in the Read table in one of the form
        Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
The main program was "RSM13000 ". In the source code you have the termination point in
line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
of the (Include) program "LV45UF0V".
The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
Thanks,
Csuman

Dump during sales order creation for a config material (uding order BOM)

Dear all,
I am getting the following error during sales order creation for a configurable material
When I click on 'Engineering' tab in the characteristics value assignment for the parent material i.e. sales order material I get dump with following message,
'Field symbol has not yet been assigned'
Thanks,
Yogesh

Yogesh,
what was the problem ?
Thanks,
Pavan Verma
Edited by: Pavan Verma on May 11, 2010 9:31 AM

Error during transfer of tax Condition JIN1

Dear All,
As I create a Sales Order with ref. to Quotation,I get a message in the status Bar mentioned in the Subject line.
Condition type JIN1 is not maintained in the Sales Document Pricing Procedure but mentioned in the Tax procedure.
Detailed Error Description:-
Error during transfer of tax condition JIN1
Message no. VH807
Diagnosis
A condition type is found in the tax determination procedure, which is not available in the current document pricing procedure.
If I see the JIN1 condition Type detail in the sales order,there is an added option in Control data :- X (Inactive via formulae of incorrect).
Kindly suggest.
Best Regards,
Ankur

Check in your pricing procedure, whether you have maintained this condition type. Next check in FTXP whether you have maintained the required percentage against this condition type
Incidentally, if you are in ECC6, condition type for CST is JIN7 and not JIN1 in which case, check in V/07 and select MWST
thanks
G. Lakshmipathi

"Error during transfer of tax condition AP4E"

Hi Guys
Please help me with the above error log.
"error during transfer of tax condition AP4E"
I came across this error whiles trying to create an order.
How do i resolve this.
Cheers.

Hi there
Include condition type AP4E in the Pricing Procedure .actually this is hapenning when the values of AP4E are flowing from the Tax Procedure to your Pricing Procedure. And in the tax procedure this condition type would be there and in the pricing procedure it might not,
So please check and maintain that as required.....
Thanks,
Raja

Reg:error during transfer order creation

Similar Messages

Maybe you are looking for