Reg: importing/exporting repositories problem

Hi all,
I done all the exports from development in below vice versa:
from topology:
export master repository
export topology
export logical topology
export execution environment
from security
export security settings
from designer
export work repository
all are in .zip file formats only.
i created 2 new schams in production db like impmaster for master repository and impwork for work repository
then next
i created one new login name example produtionmastr
1)after that i imported master repository from import master repository winzard.
2)it imported sucess fully i got all technologies,physical servers,physical schems,logical schemas,agents,contexts also.
3)next i tried to import topology,logical topology and execution environment it takes time but nothing will be impoted. (my quwstion is what is the reason for we
again import topology logical topology again,when the time import master repository only we are getting all the things in topology.then what is use for this options.)
4)next think i created one work repository in topology manager with different id from development
5)i created login name for work repository and i login to designer.
6) i imported work repository from zip file using synonym insert mode. imported success.
7)i changed all the physical paths in physical data servers. every thing fine.
8)but i am getting problem with agent.previously i am working with odi 10.1.3.
error is:
oracle.odi.runtime.agent.invocation.InvocationException: ODI-1221: Unable to restart session 11050: session is not found in work repository WORKREP1.
     at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:260)
     at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartSession(InternalRemoteRuntimeAgentInvoker.java:171)
     at com.sunopsis.graphical.dialog.SnpsDialogExecution.runStartSession(SnpsDialogExecution.java:1972)
     at com.sunopsis.graphical.dialog.SnpsDialogExecution.doVariableExecuter(SnpsDialogExecution.java:1340)
     at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.handleRefreshVariableAction(EditFrameSnpVar.java:818)
     at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.access$6(EditFrameSnpVar.java:796)
     at com.sunopsis.graphical.frame.edit.EditFrameSnpVar$1.actionPerformed(EditFrameSnpVar.java:346)
     at com.sunopsis.graphical.component.toolbar.OdiTextAreaToolbarAction.executeAction(OdiTextAreaToolbarAction.java:146)
     at com.sunopsis.graphical.component.toolbar.AbstractOdiToolbarAction.actionPerformed(AbstractOdiToolbarAction.java:203)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2319)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:274)
     at java.awt.Component.processMouseEvent(Component.java:6289)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
     at java.awt.Component.processEvent(Component.java:6054)
     at java.awt.Container.processEvent(Container.java:2042)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4483)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2479)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:618)
     at java.awt.EventQueue$2.run(EventQueue.java:615)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:270)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:175)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:170)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:162)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
9)in 11g odi agent creation was totally different all configurations need to odiparams.bat.
10)my doubt can i need to update all the repository names in odiparams.bat file
11)or we can reuse the one agent to all repositories why because in 11g we are giving all reps names in odiparams.bat file.
please share your solutions
Regards,
Surya

3)next i tried to import topology,logical topology and execution environment it takes time but nothing will be imported. (my quwstion is what is the reason for we
again import topology logical topology again,when the time import master repository only we are getting all the things in topology.then what is use for this options.)
Ideally i would suggest when you are importing for the first time you can use the Import Master Repository wizard and from next time if any small changes has then import those individual ODI Object.
You don't have to repeats those individual import once the Master Repository Import is successful.
Reg Agent Error You can create an Agent manually in the your new Topology.
I believe you have upgraded from 10g to 11g . In that case all your Master Rep url and credentials might change and so the old odiparams might not work .Please update odiparams accordingly.

Similar Messages

Reg importing exported ccsexport files from 9.3.1 into 11.1.2.1

Hi,
I have exported cssimportexport.properties file of hyperion system 9.3.1
Now i have exported .csv files with the following names(export MSAD and export Native).
I want them to be moved into hyperion system 11.1.2.1 using LCM.
Pl. suggest me the steps to be followed in importing the .CSV files into my system 11.1.2.1.
Cheers
Praveen

The LCM documentation is available at http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_lifecycle_management/launch.htm
Also if you are new to LCM then it is worth having a look at the following Oracle by Example which will take you through the steps - http://www.oracle.com/webfolder/technetwork/tutorials/obe/hyp/PLN11.1.2_LCM/index.html
It may also be worth extracting some test provisioning out of your 11.1.2.1 environment first to make sure you have the format of the file correct.
Cheers
John
http://john-goodwin.blogspot.com/

IMPORT/EXPORT problem.

Hi,
I am using a import export statement in my program.
REPORT ZKATEST.
data : w_test type c value '1'.
data : w_test1 type c.
export w_test to memory id 'ZKAPIL'.
import w_test1 from memory id 'ZKAPIL'.
write : w_test1.
Here the value gets exported to memory, but while importing its not getting populated (w_test1 is blank).
Please suggest the solution.
Thanks
Kapil

Hi kapil,
1. This kind of problems happen
 because the variable name,
 for export
 and import are different.
2. While exporting,
 Under memory id ZKAPIL,
 Value of W_TEST is stored with the name W_TEST.
3. From the syntax,
 import w_test1 from memory id 'ZKAPIL'
 while importing, from memory id ZKAPIL,
 the sysetm will , by default,
 try to search the value stored under name W_TEST1.
(But it won't be found, because the orignal value is stored
under the name W_TEST and not W_TEST1)
4. So just modify the syntax with this, and it will work fine.
import W_TEST = w_test1 from memory id 'ZKAPIL'.
regards,
amit m.

Problem of Data Import/Export after migration of Oracle DB 9i to 10g

We have encountered the following problem after the migration of Oracle DB 9i to 10g R1 and ESRI ArcSDE 8.3 to 9.1.
In our development server, a view was created by joining of one feature class (point feature), two attribute tables and one F table. We have to perform a process to export all the features in that particular view from the development server and then import them to the production server. In total, there should be about 60,000 points.
Form our past experience (using Oracle DB 9i and ESRI ArcSDE 8.3); we spent about 15-20 minutes to complete the import-export procedure. However, after the system migration, the speed of the import-export procedures is extremely slow, which is talking about 2 hours for ONLY EXPORTING 5MB data.
We would like to seek advice in solving the above problems. THANKS!

Try to delete old stats, then gather new stats on the schema and try the export again.

Suggestions needed for Export/Import Business Area Problem

I'm trying to export/import a Business Area from one instance to another and I get the following error during import processes.
Database Error - ORA-00001: unique constraint (EUL4_US.EUL4_EXP_PK) violated
The Business Area I'm trying to import doesn't exists in new instance. During the import wizard I've checked refresh existing object and match by identifiers.
I think my target instance has objects with same identifiers, so I went ahead and changed the identifiers in my source, but still problem persists. How can I correct this error?
Thanks

Did you happen to copy the EUL from one database to another before you were importing/exporting the BA?
Discoverer recognizes EULs using unique reference numbers. However, if you use the database export and import utilities to copy an EUL, the new EUL (including its reference number) will be identical to the original EUL. When EULs have the same reference number, EUL consistency issues can arise if you do both of the following:
* If you modify objects in both the original EUL and in the new EUL
* Having modified objects in both EULs, if you then attempt to copy objects between the two EULs using the Discoverer Export Wizard and Import Wizard (or the Discoverer /export and /import commands)
To avoid potential EUL consistency issues, run the eul5_id.sql script as the owner of the new EUL. The eul5_id.sql script gives a new refererence number to the new EUL and thereby avoids any potential EUL consistency issues.
Reference
* How to import an EUL using the standard database import utility
http://download-west.oracle.com/docs/html/B13916_04/maintain_eul.htm#i1008632
For 4i, you will ned to run:
sql> update EUL4_VERSIONS set VER_EUL_TIMESTAMP =TO_CHAR(SYSDATE, 'YYYYMMDDHH24MISS');
sql> commit;
Some similar EUL inconsistencies are documented in:
Note.267476.1 Discoverer Workbook Fails With 'Cannot join tables.Item dependency "" not found in EUL' After EUL Migration, Importing Or Cloning
You might want to check that if the EUL version timestamps are the same.
~Steve.

Getting problem in Import/export of data

Hi,
I have just cloned my database to an another machine. Everything is ok with the database.But when I try to import/export the data from that new database I get these error messages,
Exp 00056 - Oracle error 1403 encountered
ORA-01403 - No data found
Exp - 00000 - Export terminated unsuccessfully
santosh
[email protected]

hi
Examples of Using Different Releases of Export and Import
Table 19-7 shows some examples of which Export and Import releases to use when moving data between different releases of the Oracle database.
Table 19-7 Using Different Releases of Export and Import
Export from->Import to Use Export Release Use Import Release
8.1.6 -> 8.1.6 8.1.6 8.1.6
8.1.5 -> 8.0.6 8.0.6 8.0.6
8.1.7 -> 8.1.6 8.1.6 8.1.6
9.0.1 -> 8.1.6 8.1.6 8.1.6
9.0.1 -> 9.0.2 9.0.1 9.0.2
9.0.2 -> 10.1.0 9.0.2 10.1.0
10.1.0 -> 9.0.2 9.0.2 9.0.2
Restrictions When Using Different Releases and Versions of Export and Import
The following restrictions apply when you are using different releases of Export and Import:
1.Export dump files can be read only by the Import utility because they are stored in a special binary format.
2.Any export dump file can be imported into a later release of the Oracle database.
3.The Import utility cannot read export dump files created by the Export utility of a later maintenance release or version. For example, a release 9.2 export dump file cannot be imported by a release 9.0.1 Import utility.
4.Whenever a lower version of the Export utility runs with a later version of the Oracle database, categories of database objects that did not exist in the earlier version are excluded from the export.
5.Export files generated by Oracle9i Export, either direct path or conventional path, are incompatible with earlier releases of Import and can be imported only with Oracle9i Import. When backward compatibility is an issue, use the earlier release or version of the Export utility against the Oracle9i database.
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1013164i hope it will help u.
regards
Mohammadi52
Message was edited by:
Mohammadi52

Import / Export problems

Hi team.
I have a 4.6 C version an the import / export works fine.
But in the SAP ERP Central Component 5.0
I do the Export.
Review the abap memory and se the areas, but empty.
And when I do the import the data are clear.
Do you have any idea.
And i can't change for a SET parameter Id, becuase the data are numeric.
Thanks

Hi David, could you please post the a sample of the code that is not working?
Best regards
Edited by: Fernando Ariel Villa on May 17, 2011 11:05 PM

Import / Export Script Presets problem

Hi all,
I've an issue when trying to import / export custom scripts using the import/export presets command in CS6.
I like to have custom scripts accessible under the File > Scripts menu, so I keep them in the Application / Presets Folder. I've found if I store them in the Users/ Presets folder they don't appear under the File > Scripts menu.
If I use the Export Presets command, I can't export custom scripts stored in the application folder, only if I have them stored in the User/Preset directory.
If I go to another machine and use the Import Preset Option, I can get it to import the custom scripts from a back up folder, but they get installed in the User/Presets directory, so I end up having to manually move them afterwards.
Is there a way around this ? It's great being able to package the presets and quickly install them elsewhere, but at the moment I'm still having to move the scripts by hand
Mac 10.6.8 PS 13.01

HI,
I've no idea why you get that error, but there's a simpler way to transport your bookmarks to another machine.
/Users/YourUsername/Library/Safari/Bookmarks.plist
Copy that file to the equivalent location on the other machine and that's it.

Import from export files problem

Hi,
I am a new user. I installed oracle 10g. I took an export one schema and I want to import back. But when I put "import to export files" , it says "the page cannot be displayed." and I installed another machine, it says same thing. What am I do wrong?

Did you try to run export/import from commands? or some kinda GUI tool?
If you use import/export, you can find them from Oracle syntax.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm

Questions on Subviews and Import/Export in Data Modeler v3 EA1.

I have a few questions about the capabilities of Data Modeler v3 EA1:
1) Is it possible to rename subviews? Would like more meaningful names then Relational_x - Subview_x.
2) Is it possible to save documents at subview level?
3) Is it possible to import/export subsets of data?
4) Having problems importing Erwin 7 .xml file, is there known problems with this import?
Judy

Hi Judy,
1) To rename a subview just right click on it in the browser tree and select "Properties". In the properties dialog change the name and click OK button.
2) You can save a subview as new Data Modeler design - from the File menu select Export -> To Data Modeling Design. In the newly opened dialog select the subview you want to export and click OK button.
3) After saving a subview as new design (see answer #2) it can be imported in some other design (File -> Import -> Data Modeler Design).
4) What kind of problems do you have with import of Erwin 7.* xml file?
Regards,
Ivan

IMPORT/EXPORT statement in Background Mode

Hey dudes,
I am facing a problem in my coding. I am dealing with coding in several events in IS-U, transaction FPY1.
However, it's not so important ya. Now I am written some code on IMPORT and EXPORT some parameters between 2 program code. It's work very fine only in 'DEBUG MODE', but when it's running not debug mode (Is BACKGROUND MODE), coz it's massive run program.
I suspect it's because of the background job. Does background job using ABAP Memory? IMPORT/EXPORT is only for dialog work process, not background work process?? I have a lot of question mark on my head now..
Hope anyone facing dis issue before can help.
Cheers,
Isaac.

Are you trying to pass data via EXPORT/IMPORT between two programs that are both running in background, or from an online session to a background process?... i.e. what are the two lots of program code that you are wanting to pass parameters between?
It would be fine for a background program to "export" data to a memory ID, then for the same batch program to submit another program that does the "import" from the same memory ID... but this method won't work for an online user doing an "export" and a batch job doing an "import" -> for this to work, you would need to persist the parameters so that the batch job can retrieve them.
If you can explain the scenario a bit more, will try to offer more help...
Jonathan

Import from catalog problems

Cannot import from catalog, LR quits and I get about 2 or 3 photos imported.
Adobe was no help, they had no idea why.
Have tried to "import from Cat" twice. Moving two different catalogs into my main desktop catalog. Both did not work.
All three catalogs ( two from laptop and my main LR cat) work fine and I can import photos no problem.
Would like to import all the changes of photos that I have made with these two catalogs that I did on my laptop. (Both cats are on an external hard drive).
Thoughts anyone?
I am having some issues with my video card. Screen right now is a bit pink. This would be the fourth video card I will need on this Mac Pro. Would this be the cause?
Thanks.

flyboys911 wrote:
Do I need to export the laptop cats if thy are already on a separate hard drive?
It might help. Exporting a catalog sometimes cures corruption in the original catalog. Try exporting into a new catalog and then importing the new one on your desktop.
Never heard of the last thing you mentioned. Can you describe more?
Lightroom has a preferences file, which sometimes gets corrupt and can cause all kinds of weard behaviour. You can delete (or rename away) the preferences file, and LR will build a fresh one when started. If you rename it, you will still have it if you decide you want it back.
To rename the preferences file, rename the file
"[username]/Library/Preferences/com.adobe.Lightroom3.plist"
to something like
"[username]/Library/Preferences/com.adobe.Lightroom3.plist.old"
while LR is closed and restart LR.
Beat

Application import/export failing, hopefully a simple one though

hi all,
i'm very new to oracle and am trying to get going with xe. i'm working between work and home and want to be able to transport wherever i'm at to work/home - so i thought the application import/export function would be the best way? first of all, is it?
if so - i keep getting the
failed to parse SQL query:
ORA-00942: table or view does not exist
error
i'm running the same versions of oracle, on the same platforms (Application Express 2.1.0.00.39, winXPpro all service packed up). both my users have dba roles and the apps work fine on the machines i created them on. the import and install processes claim to be successful and the error only comes up when i try to log in to the application. any ideas?
btw - the apps are just simple tests, dependences etc with a couple rows in each table]
any help be much appreciated even if its "go read this!" as i've googled away & got not much....
cheers!

Your problem is likely that in your office you do not have the tables required by your program. The export does not include your tables. You have to create them yourselves

How to import/export in Pl/SQL ?

Hello
I want to write a procedure in PL/SQL which will be copying one user's schema to another.
I have Oracle 9i on Windows 2000.
My first idea was to use IMP EXP commands, but i need to execute this commands from PL/SQL procedure. How can I do this, except from writing Java procedure using Runtime class - I've done it, it works, but sometimes occure an critical error in Oracle Kernel, and I'm sure that Java code is ok.
Or maybe there is much easier way to solve such a problem (PL/SQL interface for import/export or something)?
Thanks for any hints.

No, imp/exp are standalone utilities with no PL/SQL API. Java would be the way to do it.

IMPORT/EXPORT in RFC

Hello,
I am programming an RFC that sends a XSTRING a Java web portal, and in this case I have to send a PDF XSTRING generated on the SAP server.
Therefore I am calling the program that generates the PDF and the return string of bits through the RFC IMPORT / EXPORT, and the problem I have that I do not get the RFC, but the program is making the process well.
As I do?
I've checked several forums on SDN and I have not seen anything that I have fixed the problem.
Greetings.

Hi
Have you tried with a debug??
the destination is correct??
regards
Marco

Reg: importing/exporting repositories problem

Similar Messages

Maybe you are looking for