Reg Mass maintenance in Material master

Dear Gurus,
                       I have uploaded HALB material wth movng avg price by mistake....I want to change it to std price in accounting view. Kindly guide me how to change it as standard price.

Hi,
Use Tcode MASS to change data.
Go to MASS - select object type as  BUS1001001 (material) - Execute - here select the tab FIELD and select the line with field: price control again execute then enter. input the number from and to of the materials for which you are require to change the price control and execute.
I hope this helps
Regards,

Similar Messages

  • Error during Mass Maintenance of Material Master

    Dear All SAP guru,
    During mass maintenance of order unit ( PCS) and variable order unit "1" (Active) from T-code MM17, system is giving one error message.
    Error Mess:  30000052280140 : Messages have been issued: number MASS000120000000 and notification No.:
    MK101.
    While system allowing automatically to log through MM90, but after puting the log no.: MASS000120000000, system is not execting.
    Pl suggest ....as conversation factor is also maintained in material master for this.
    Regards,
    Pinku.

    HI ,
    check note 487111.
    According to this note
    Symptom
    In the planning data mass maintenance (MPGD_MASS), you select the "Conversion" field (UMREF) and enter the new value e.g. '2,01' and save the change. In the log of the mass maintenance, the system issues error
    MK101:
               ....... : Messages have been issued: number MASS............
    Detailed display of error message:
    Message number BF 020
               Value cannot be interpreted as a floating-point number. Other terms
    Reason and Prerequisites
    The problem is caused by a program error.
    The symptom occurs if during the maintenance of your own user profiles, you defined "Comma" for the decimal notation (Transaction SU3).
    Due to a program error, the system saves the value of the field to be changed program-internally in the exponential display with "Point" as the decimal place (2.01E+00).
    Solution :
    You have implement the solution mentioned in the note .
    Regards,
    Anupam

  • Mass maintenance of material master

    Folks
    I am trying to make mass maintenance to certain fields in the material master. I want to change the MRP type from PD to X0 for several materials.
    How do I accomplish this on single shot ?
    Thanks

    Hi
    Please follow the below steps to mass change your MRP type.
    1.Go to transation MM17
    2.Select MARC in the tab Tables
    3.Select MARC-DISMM in the tab Fields & Execute
    4.Input the materials & plants ehich under goes changes.Execute.
    5.You will get two section of screens.In the top you can see New values with emty field.you can give the new value.In the bottom you get the details of existing field for material/plant combination
    6.Click the button called Carry out mass changes
    7.Save and check the log for any errors.
    You have to consider the mandatory fields that affected during the change of MRP type.
    Hope you can do the changes now.
    Thanks / karthik

  • Reg. price maintenance in material master and Costing

    Dear Experts
    I have maintained price for material in material master and costing,but when I create PO price didn't come from anywhere. Pls help me.
    Thanks
    Rajakumar.k

    Dear Rajakumar,
    The values that are maintained in the material master in costing view is considered only for costing
    purpose.
    Say while doing the cost estimate for a material using CK40N,a costing variant will be used and say For
    Eg,PPC1,for this a valuation variant will be linked ,as per this valuation variant for costing purpose the
    first priority would have been given to the planned price in the material master in costing 2 view.
    So this value will be considered only for costing purpose.
    For procurement related things you have to maintain a purchase info record for a material + vendor
    combination in ME11 and a source list in ME01.
    In the purchase info record you can maintain a price for buying the material from that vendor.
    I hope this will clear your doubts.
    Check and revert back.
    Regards
    Mangalraj.S

  • MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS

    Dear Experts,
    Is there any separate t code available to MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS ?
    I got this POINT from ECC 6.0 features in Solution browser.
    Please help me on this.
    MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS:
    Functionality Enhancements
    Provides a specific transaction for mass maintenance of material related excise duties fields
    Business Benefits
    Mass maintenance can now be performed in one step for material-relevant excise duties fields, instead of maintaining the excise duties fields in each material master record separately.
    Regards
    Soundar.G

    Dear Ravi,
    I have already created LSMW for this in Material master and J1ID.
    But i have checked in ECC 6.0 feature, there they are mentioning New t code is available for MASS maintenance of excise duty fields.
    Regards
    Soundar.G

  • MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS - T CODE

    Dear Experts,
    Is there any separate t code available to  MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS ?
    I got this POINT from ECC 6.0 features in Solution browser.
    Please help me on this.
    MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS:
    Functionality Enhancements
    Provides a specific transaction for mass maintenance of material related excise duties fields
    Business Benefits
    Mass maintenance can now be performed in one step for material-relevant excise duties fields, instead of maintaining the excise duties fields in each material master record separately.
    Regards
    Soundar.G

    Dear Ravi,
    I have already created LSMW for this in Material master and J1ID.
    But i have checked in ECC 6.0 feature, there they are mentioning New t code is available for MASS maintenance of excise duty fields.
    Regards
    Soundar.G

  • Mass changes of Material Master field with different values

    Hi,
    How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
    Thanks,
    K R Vishnu Kumar

    Hi Kumar.
    I think you have to use LSMW for mass updation for Material Master fields with different values.
    Regards,
    Rahul.

  • Mass updating of material master

    Hi,
    can any one plz tell me the process of mass updation of material master charecteristics such as classification name, classification type,charecteristics name, charecteristics value for the given materials.
    give me some brief overview so that i can proceed on that.
    I have to use either BAPI or IDOC only.
    Thanks & Regards
    Nageswar

    Hi Eswar,
    Please check with BAPI_OBJCL_CREATE_KEY. There are no of threads available on same topic. lease check for the available information in SCN.I will suggest you post this in Data transfers forum.
    Same thread
    mass updating of material master
    which was blocked by moderator  Thomas and posted the same again
    Regards,
    Madhu.
    Edited by: madhurao123 on Nov 2, 2011 11:43 AM
    Edited by: madhurao123 on Nov 2, 2011 11:45 AM
    Edited by: madhurao123 on Nov 2, 2011 11:47 AM

  • Problem with mass IDoc for Material Master

    Hi All,
    Can anyone suggest a solution to work with mass IDocs for Material master?
    We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
    Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
    Regards
    Pooja

    Hello Pooja:
    The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
    In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
    However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
    The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
    Hope this helps.
    Regards,
    Jorge.

  • Mass update on Material Master

    Hi MM experts,
    How can I "mass update" a large number of material to avoid a lot of manual work?
    Specifically updating/changing  Commodity code / Import code number for foreign trade.
    thanks!
    Warm regards,
    Jump

    Hi,
    Please try using T code MM17 to carry out mass change to material master record.
    Regards
    ram

  • Mass Change in Material Master

    How to do mass Change of material group (say from 1HA TO 1HB) in material master in basic data 1 tab.
    Plz explain steps.

    Hi Rohit,
    Follow the Steps  SPRO - SAP Reference IMG - Production - Material
    Requirement Planning - Planning - Define Storage location MRP per plant - Enter
    the plant - Check for which Storage locations has got the indicator 1 - Storage
    Location stock excluded from MRP - Now remove that or choose the values.
    if you give me brief i can help you out more.
    Thank you .
    Regards
    Ram

  • Mass deletion of material master at plant level

    Hi,
    Is there any way to flag materials nearly 500 Nos for deletion at plant level.
    Regards,
    Vengat

    hi,
    Use mass transaction for putting the delete indicator for the material master...this is to be done from MM17 tcode...
    and later they all could archived...Archive it from MM71 and can display this from MM72..
    Regards
    Priyanka.P

  • Mass change of material master

    Hi Experts,
    I have a query regarding mass change to be done in material master. I need to update one value in the Material group 4 field in sales org view 2 in MM02 transaction for nearly 300000 materials. One option i find is LSMW and the other i saw is transaction MM17. Please let me know how feasible is this MM17 transaction? Is it possible to upload all the 30000 materials through MM17 transaction in one go and update the field? Will there be any performance issue if MM17 transaction is used?
    Please give your suggestion.
    Thanks
    Dinakar

    Hi,
    Use MM17,
    Goto the Transaction code MM17 and in the table check the MVKE- sales org data for material
    and select the Fields tab and choose the field MVKE-MVGR4 and  execute
    Now enter all the materials in the next screen  for which you want to change  and execute
    In the next screen you can maintain the new values for the old
    Please check and revert
    thanks,
    santosh

  • Mass Deletion of Material Master

    Hi All
    Please am trying to delete material master have created. i need a Tcode for mass deletion.
    Thank you.

    Hi,
    In MM06 you can set deletion flag for materials (mara-lvorm).  For multiple materials, use T. Codes MM17 or MASS. 
    ---> Select MARA Table
    ---> Select multiple selection, past all material list and execute.
    ---> Select DF at client level from field selection tab.
    To delete the Material Master records totally, use SARA.  If there is posting done, then need to archieve that too.

  • Reg:Extra field in Material master record

    Hi All,
    Our client has come up with a requirement of adding extra field while creating material.This is to enhance the users to enter the grade details.This requirement i wnated in standard and in Basic data 1 /2 . We could do it with Z developments but rejected by our customer.Also the field fashion grade cannot be used since it is available for garments industry. so its utilization is constrined.
    Is there any way to add this field in MM)! basic data 1/2 in standard
    Reg
    SAPmm

    Hi,
    You have to go for ABAP Development if you need a totally new field for Grade of the Material.
    1. Create Z-Field
    2. Add it in Material Master Tables by appending
    3. OMT3B - For Screen Sequence "21", under "Subscreens" of "Basic Data 1" Screen, add the field.
    Else you can use many other available fields for Grade Purpose for e.g. Dimensions field in Basic Data 1 and Basic Material in Basic Data 2 view.

Maybe you are looking for

  • Error While Importing a DC

    Hi All, I have created some tracks in CMS in the EP. Now when i try to import those configurations into the Developer studio I get an error "CIM_ERR_FAILED: Object manager is not activated" Can you please help me resolve this error? Thanks Bharath Mo

  • Media Encoder Vimeo Preset Bug

    Hi, all! I've found a strange bug. I've created 1920*1080 video in AE CC, and decided to publish on my vimeo channel (I have vimeo plus account). So I've rendered it in Encoder and I've decided to use  it's Vimeo HD 1080p 25 render preset. The video

  • Issue with client configuration for CuciLync 9.2.5

    Hi, we are currently preparing the client configuration for CuciLync 9.2.5. When CuciLync starts we don't want to see the CuciLync window in the foreground. Therefore we use the 'hubvisible' setting. %APPDATA% \Cisco\Unified Communications\Jabber\CSF

  • HOW DO I DOWNLOAD A MOVIE

    I AM HAVING PROBLEMS DOWNLOADING A MOVIE I ALREADY PAID FOR IN ITUNES?

  • IWeb doesn't offer widget for Facebook "Like" button?

    Is it true that iWeb doesn't offer a widget for adding a Facebook LIKE button? The code offered to copy by Facebook doesn't work when I paste it into a text box on my iWeb site. Thanks for any insights fellow users can offer. My free trial will be en