Reg next inspection date

Dear all,
Is there any standard report in SAP which gives the list of all materials which are due for retesting in a period of time like say 1 st of month to 30 th of month
regards
venkat

Hi
I think its QA07 only but also explore BMBC
Regards
Sujit

Similar Messages

  • Next inspection date is not updated in batch / prposed at the time of UD

    Hi
    I have configurted the system for retest of batches, the system successfully creates the inspection lot but when does not propose next inspection date at the time of UD nor it updates in Batch Master.
    I entered inspection interval days in QM View, the system entered the first inspection date correctly. Also Batch Restriction is working properly.
    Kindly help.
    regards
    Mobashir

    Hi Shaymal & VRMP
    I have checked the system, the only problem I am facing is that the system does not show next inspection date dialog box at the time of UD where I can see the next inspection date being set by the system
    Say, I use QA07 (Triggered Manually) on 19.jan.08. The Next inspection date was 26.jan.08 and Initial Run in Days was 10 (days), the system created inspection lot on 19.jan.08 successfully. At the time of UD it automatically set 29.jan.08 as the next inspection date (i.e. 19.jan.08 + 10 days)  istead of 06. Feb.08 (i.e. 26.jan.08 + 10 days) without showing dialog box / suggesting next inspectino date. 
    regards
    Mobashir
    Edited by: Muhammad Mobashir on Jan 19, 2009 7:11 AM

  • Deactivate creation of new next inspection date on re-GR

    Our user created GR (MIGO) against a PO and subsequently a new batch with a next inspection date was created based on inspection interval set to 730 days.
    The user agin after a few days did GR against the same PO and the next inspection date was again calculated based on this GR date and the interval. We do not want this re-assignment of the next inspection date once it has been set. Please help.
    Mrunal

    The problem is a user error.
    When you receipt a material that has a shelf life requirement, you must enter in the production date, (manufacture date), in the GR.  If you don't, it will default in the current date and usse that to calculate the expiration date.
    On the second receipt, the same thing will happen.  If the same batch is specified, if I remember correctly, the system should give a message that "batch has already been receieved" or some kind of warning.  For the production date, I believe it will still default in the current date.  I think there is another warning that the expiration date will be recalculated and a "do you want to continue" question.  If they blow through all these warnings, the system takes the new manufacture date and recalculates the new expiration date.  To the best of my knowledge you can't change this.  The users must be trained to ALWAYS enter in the correct prodcution date. 
    FF

  • Report to get next inspection date from msc2n

    Dear All ,
    I am trying to create a report for materials batches and the next inspection dates in msc2n . Is there a report of this type available in standard SAP ?
    Secondly
    From msc2n it gives the field as QNDAT in table MCHA . However I notice that when the dates in msc2n are manually changed or many other times the fields QNDAT in MCHA are completely blank . I have how ever noticed that the field QNDAT in MCH1 gives all the next inspection dates . How ever it is not mentioned in msc2n > How could this be explained .
    Ram~

    Hello Ram,
    No there is no such STD trx available that can give you your desire list for 'Next Inspection data'.
    Regards,
    Shyamal
    Edited by: Shyamal Joshi on Dec 23, 2008 11:48 AM
    Yes As correctly suggested by Ashok the table is MCH1, from where you can find all the details you need. along with the changed (Updated record) through MSC2N.
    Edited by: Shyamal Joshi on Dec 23, 2008 2:24 PM
    Dear Ram,
    BMBC will not help you to see the 'Next Inspection Date' in list form for all the batches in one screen. You will need to go to the Batch detail Change-Display for each batch to meet the requirement. While the table MCH1 is 100% satisfactory one for your requirement.

  • Next inspection date

    "Inspection interval" is defined in the QM view of Material Master, and the system is calculating the Next inspection date from mfg. date automatically, and feeding it automatically in the relevant field in the Batch.
    Hence, we need to change u201CNext inspection dateu201D manually for each previous batch if it is revised on the basis of stability, which is practically vary difficult.
    Requirement: Retest period shall be revised if changed updated in material master for inspection interval.
    AYK

    Dear AYK
    From your post it appears that you have Batch Management activated lready and QM functionality you are trying to activate subsequently.
    I think you need to make use  of Recurring inspection for Batches with Shelf Life Expiry Date (SLED) then only this functionality will work in totality. For this purpose in QM view add Inspection interval period alongwith SLED data
    You can use Trigger manually ( T.code QA07) or Job planning ( T.code QA05) for this purpose.
    Incase you just want to update next Inspection, you need to do one by one OR make LSMW for same.
    Hope this will give you clue
    Regards
    GIRISH

  • Next inspection date in the Batch Determination Screen

    Hi Gurus,
    I am having problems with some user requirements because I am an abaper and I think this needs some SD expertice. Users want to see the "Next inspection date" of the batch (field QNDAT) when they do the batch determination of a delivery (Batch Split --> Batch determination). They want to see a new column in the screen, right next to the "Characteristic sort" field. I think that to put a new column in that standard screen is not possible. So I suggest to change the contents of the existing characteristic sort. And there is where I do not know how to do that. It is possible at all to have the next inspection date as a characteristic of the batch and then use it to sort?
    Any help would be really appreciated.
    Regards.

    Hi,
    Yes you can use next inspection date as a characteristics and sort the batches based on that.
    Inform the user to add this characteristics (LOBM_QNDAT) in the material batch class and batch selection class using transaction code CL02.
    Then in SPRO, using transaction code CU71, in the sort rule add this field as characteristics (LOBM_QNDAT).By this way the system will sort the batches based on next inspection date as parameter.
    Note that the user needs to fill-in the next inspection date in all the batches in order for the sort rule to work properly.
    Regards,

  • Variable Next inspection date

    Hello Forum,
    I am working on a requirement of Variable Next inspection date. First time the next inspection time line is after 6 months and 2nd time it should be triggered after 4 months and subsequent one at each month .  There is only single field as Inspection interval in the material master. After looking superficially it looks to me that we can realise this through the exit QEVA0003.
    But before designing in detail using this  exit I would like to understand whether we can achieve this with any other standard SAP functionality -. Bespoke development and exits are the last thing I like to suggest to clients if we have standards SAP way to do the same thing .
    Regards
    Kaushik

    You are correct.
    The customer exit 'QEVA0003' inputs the next inspection date of batch master.
    User can change the next inspection date at transaction MSC2N or MSC5N in SAP standard.
    But if you have variable interval for recurring inspection and want to assign next inspection date automatically, you should implement the exit 'QEVA0003'.
    Regards
    Luke

  • Batch determination with condition next inspection date is =10

    Hi,
    I want to configure the batch determination in such a way that if next inspection date is <=10 then the batch should not consider in the batch determination at the time of creation of process order, only those batchs should conside whose next inspection date is more 10 days.
    can anyone suggest ,any solution on this .
    Thanks
    HS

    Hi Shaymal & VRMP
    I have checked the system, the only problem I am facing is that the system does not show next inspection date dialog box at the time of UD where I can see the next inspection date being set by the system
    Say, I use QA07 (Triggered Manually) on 19.jan.08. The Next inspection date was 26.jan.08 and Initial Run in Days was 10 (days), the system created inspection lot on 19.jan.08 successfully. At the time of UD it automatically set 29.jan.08 as the next inspection date (i.e. 19.jan.08 + 10 days)  istead of 06. Feb.08 (i.e. 26.jan.08 + 10 days) without showing dialog box / suggesting next inspectino date. 
    regards
    Mobashir
    Edited by: Muhammad Mobashir on Jan 19, 2009 7:11 AM

  • Automatic inspection lot creation  upon reaching the next inspection date

    Hi qm experts,
    I have this scenario; my client wants to make an automatic inspection lot creation as well as posting to quality inspection stock of certain materials upon reaching its next inspection date defined in the msc2n transaction; how shall i make the inspection set-up of this materials??Thanks
    Regards,
    Matildo, Edsel F.
    QM Consultant

    Ok, you have me confused.  You want to do this as a one time thing?  I thought you want it to look every day, or every week, for batches that have reached their next inspection date?
    If its a one time thing, then yes, just run QA07 one time.  It only looks at unrestricted inventory.  Do not set up any parameters in the bottom half of the screen for expiration date.  If you do, any of those that have reached expiration date will be moved to blocked stock and no inspection lots created.
    If you want this to run regularly, you, or someone, needs to use QA05 to set up the batch job to run on a regular basis witht the approriate "days" value for how often your running it and how far in advance of the inspection date you want lots created.  And of course tick on "to inspection stock".
    There is no "automatic creation" as I think your thinking.  You either run QA07 once a day, or once a week or as often as you want to.  OR you set it up in a batch job (QA05) to be run once a day, once a week or as often as you want to.
    When the batch job is running, it 'appears' that the lots get created automatically.  But it is the QA07 program being run in batch that is creating them.
    Craig

  • Next Inspection Date in case of Mov. Type: 309

    Hi,
    During Transfer posting using Mov. Type: 309, (Inspection Type: 08) the Next Inspection Date is coming as per our logic of UD Date + 365 (Inspection Interval maintained in Material Mst.).
    But our requirement if that, the Next Inspection Date in case of transferred material must be same as from which transfer has been done.
    e.g. suppose material ABC is received with GR (Mov. Type:101) and its Its Next Inspection date is coming as 01/01/2012 (as its UD was done on 01/01/2011 + 365 (Inspection Interval maintained in Mtrl Mst).
    When we transfer this material to XYZ (with Mov. Type:309), its Next Inspection Date is required that of ABC (01/01/2012). But, as per present logic it is coming UD Date + 365 Days = 23/01/2012 (i.e. if UD is performed on 23/01/2011).
    How can I do that ?
    Thanx
    Vivek

    My guess is your batch level is at the plant level.  If the batch level is changed to material level or client level, this problem would go away.  This can have major impacts in other areas so it must be carefully considered.  But if this your requirement, it sounds like you might be at the wrong batch level right now.
    FF

  • MSC2n next inspection lot to be calculated from the production date

    Hi gurus,
    My query is
    1.  In Tcode MSC2n, next inspection lot is to be calculated from the production date and not from last goods movement date. is it possible to get next inspection lot to be calculated from the production date.
    2. how to make automatic creation of inspection lot in SAP based on the next inspection date. Right not, it is being done manually using T-code QA07.
    thanks in advance
    regards
    vb

    To manipulate next inspection date use user exit QEVA0003.
    To automatically create 09 inspection types use transaction QA05, schedule it to run in background at periodic interval

  • Recurring inspection date -how to update

    Hi experts,
    I am doing recurring inspection of a batch B1 of material X with inspection interval=4 days  which has been manufactured on 17.09.2014 and its next inspection date is 21.09.2014 if we see in MSC2N.
    In QM07 i am putting "initial days =4" and a lot is formed. I did UD of that lot and cleared.
    Now my question is how will my batch update with next inspection date as 21+4=25.09.2014 or i have to do it manually.How can i fullfill requirement of recurring inspection of batch will lot formation on interval of 4 days?

    Hi Amit,
    You need to schedule background job using transaction QA05 using variant.
    If the background job is scheduled daily, the system creates inspection lots as per the control parameters in the variant.
    1. Lot Creation only: The system creates inspection lots for the selected batches when the next inspection date is within the opening period automatically as per your indicator set on the initial screen.
    2. To inspection stock at lot creation: The system creates inspection lots for the selected batches when the next inspection date is within the opening period. When the inspection lots are created, it posts the batch stock to inspection stock. If an inspection lot already exists, the stocks are also posted to inspection stock and the inspection lot is updated accordingly.
    3. Block batch at lot creation: The system creates inspection lots for the selected batches and blocks the batches by changing their status to "restricted." If the batch status management function is not active, the stock is posted to blocked stock.
    4. To inspection stock at inspection date: The system posts the batch stock to inspection stock when the next inspection date is reached. If an inspection lot already exists, the system updates the existing inspection lot. If a lot does not exist, the system creates one.
    5. Block batch at inspection date: The system blocks the batch when the next inspection date is reached. If the batch status management function is not active in your plant, the stock is posted to blocked stock.
    Please find screen snap on the initial screen attached.
    Regards,
    Gururaj Kulkarni

  • Query to return next 7 dates

    Hello,
    is there a way to return the next 7 dates just using a query... for example, I need a query that returns:
    select (I don't know that put here) from dual
    Date
    2012-10-05
    2012-10-06
    2012-10-07
    2012-10-08
    2012-10-09
    2012-10-10
    2012-10-11
    If possible, I would like to know if there's a way to pass a date and based on it, the query returns the next 7 dates based on the passed date... for example:
    select (I don't know that put here) from dual where date > '2012-10-15'
    Date
    2012-10-16
    2012-10-17
    2012-10-18
    2012-10-19
    2012-10-20
    2012-10-21
    2012-10-22
    I really appreciate any help
    Thanks

    Sven W. wrote:
    I don't like connect by. That is fair enough, it is just your opinion.
    It is slow and shouldn't be used for real production code.This however, is absolute garbage.
    Changing the query to return 10,000 dates takes a little over 1s
    SQL> select date '2012-10-15' + level - 1 from dual
      2  connect by level <= 10000;
    <snip>
    28-FEB-40
    29-FEB-40
    01-MAR-40
    10000 rows selected.
    Elapsed: 00:00:01.26>
    In your case you can simply do this
    with inputdata as (select to_date('2012-10-15','yyyy-mm-dd') startday from dual)
    select startday+1 from inputdata union all
    select startday+2 from inputdata union all
    select startday+3 from inputdata union all
    select startday+4 from inputdata union all
    select startday+5 from inputdata union all
    select startday+6 from inputdata union all
    select startday+7 from inputdata ;
    Running your alternative for 10,000 dates took quite some time to create, needed to be put in a file to execute and has been running now for about 15 minutes
    select date '2012-10-15' + 1 from dual union all
    select date '2012-10-15' + 2 from dual union all
    <snip>
    select date '2012-10-15' + 9996 from dual union all
    select date '2012-10-15' + 9997 from dual union all
    select date '2012-10-15' + 9998 from dual union all
    select date '2012-10-15' + 9999 from dual union all
    select date '2012-10-15' + 10000 from dual
    ;It is much more code, takes more time to write, is proven to be incredibly slow and shouldn't be used for real production code.
    Edited by: 3360 on Oct 5, 2012 9:52 AM
    Sorry it took only 12 minutes, it seemed a lot longer when waiting for it
    29-FEB-40
    01-MAR-40
    01-MAR-40
    02-MAR-40
    10000 rows selected.
    Elapsed: 00:12:01.35

  • Missing inspection data in QA33.Please help

    After GR, Inspection lot was assigned. But unable to proceed to results recording in QE51N.It says "no entries found". And i could see that there was no inspection data in the lot created. i.e in QA33 the Inspection specifications tab has no data and in Insp. lot quantities tab "sample size" field says 0. I don't know where i was wrong. Please help me.
    Also please explain::
    The master data involved for QM in procurement is :
    we have to create :
    - QM view in Material master and Inspection Type as Active
    - catalog to define attributes
    - MIC to define inspection criteria(like a test case)
    - selected set
    - create sampling scheme, sampling procedures, Dynamic Modification Rules to define sampling criteria.
    - Inspection Plan
    Please correct me if i am missing any mandatory master data here.
    Also please explain how are these connected to each other to Start Quality inspection after a GR for a particular material x in plant P.
    Thanks in advance.

    Hi,
    Please check the inspection lot status  ..if its in "CRTD" (Created) status then you need to make it to "REL"(release) before proceeding (like result recording or UD)..
    Check if the Inspection plan with the correct usage is assigned in the plan concerned for GR  (As there are different usages for production,GR from purchase order,stock transfer etc)..Also see if the Inspection plan is released.
    Again the MIC's you created ,please check if they are also active.  Else see if sample size is assigned correctly
    Hope this helps
    Regards
    George

  • How to set start of cycle/next planned date at the Maintenance Item level??

    Hi All,
    We are uploading a bulk of Strategy Maintenance Plans into the system. Each plan has multiple maintenance items and each maintenance item in a plan having different next due dates. Now if we set the Start of cycle at the Maintenance Plan level, then the next due dates of the maintenance items in that plan would be calculated on the basis on Start of Cycle (Common for all) and frequency as set in MPackages in an item Task list. Since each Maintenance item may have different Frequency and next due date, generating a call object while scheduling the plan correctly to satisfy at the Maintenance item level is not seeming possible.
    Can someone please suggest as to how do I set the Start of cycle or say Next Planned Date or Last Scheduled date at the Maintenance Item level either through configuration or programmatically.We are working on an SAP 4.6C version.It is urgent!!!

    hi
    i think specifying start of the cycle for each maintenance level is not possible ,since start of the cycle refers to maintenance plan only .
    for SAP standard kindly refer the following [link|http://help.sap.com/saphelp_46c/helpdata/en/94/43a968abc011d395bd00a0c93029cf/content.htm]
    it is better to create one maintenance item per maintenance plan,if you want to control each maintenance item independently
    regards
    thyagarajan

Maybe you are looking for