Reg, SCM APO Integratin Test Scripts

Will anyone mail me SD integration test scripts @ [email protected]
or mail me the URl site, that will be of great help.
Reward full point for useful answer
Regards,
PV

This Question answered in SD forum..
In the subject line it is SCM APO Interation test scripts is written, But in the details it is asked for SD integration. please clarify which one you require?
Using Solution Manager you will get automatic generated Test scripts as per the business process mapped. It is for both the SCM - APO as well as R/3's any module which you are going to implement.

Similar Messages

Multiple Clients in SCM-APO?

In a Development SCM-APO 5.0 environment, can we have multiple clients? For instance, can we have a unit test client(with master and transactional data), a security client, and a golden configuration client.
We have heard that there may be issues with having more than one client, but we are not sure if this is correct. Our SCM-APO unit test client would be the only one that is connected to a BW (3.5) Development client and a R/3 (4.7) Development client. The security and golden config client would not be connected to external systems. Is this landscape possible and supported by SAP?

I do not have a good answer but it seems APO-DP uses BW as Data Mart which results in some restriction in using multiple client. See SAP Note 522569 for details. Moreover in the Multi-client Whitepaper (attached to SAP Note 31557) the table in page 23 mentions Multi-client Status for APO with DP : Not OK and APO w/o DP : Restricted OK.
Hope this is of some help.
somnath

Can i integrate the test scripts existing in different systems?

Hi Experts,
I have a script in ERP and another script in SCM system(two different systems). Now in my master script, i want to integrate both and run as a single script. Can i do that?
Many Thanks..
Regards,
Naresh

Hi Christoph, ALL,
I was not clear with your explanation. let me tell you what i did and what i intend to do.
1) I have created the sales order creation script in ERP system. Script name: zsalesXXXX.
2) I have created the second script to run the planning profile in other system ( SCM system). script name: zplanningXXXX.
Then i hv created the SDC with RFC destination and target system name as ERP system name for this script.
3) I want to run both the systems in ERP system using a single script. so, I have created a master script in ERP system. Script name: zintegrateXXXX to run both the scripts i.e zsalesXXXX (created in ERP) and zplanningXXXX (created in SCM).
4) In the master script, zintegrateXXXX I could include the first script zsalesXXXX using the REF command.
5) The problem arises here when i'm trying to add/include the other script zplanningXXXX(created in SCM system) using REF command. It throws an error 'Test script 'XXXXXX' cannot be found in the local system.'
I did all the recordings using TCD Record.
Please advice me, Is there any other command which i should have used instead REF?
or Anything went wrong in the steps i followed?
Kindly advice. It would be very helpful for me.
Regards,
Naresh

SCM APO can we copy the data from client 001 to client 002???

Hi Guru's
SCM APO can we copy the data from client 001 to client 002???
If it is possibulity please let me know?
Regards,
Sree

Yes you can do.
Tcode SCCL.
Options :
When copying clients, you can select what you want to transfer from the source client to the target client:
User masters: You select this option, for example, if you want to give all users of an existing client the same authorizations in the target client.
Client-specific Customizing: You select this option, for example, if you want to set up a new client in an existing system.
Client-specific Customizing and master/transaction data:
You select this option, for example, if you want to set up a test client that is identical to the production client (in the same system).
Client-specific and cross-client Customizing: You select this option, for example, if you want to set up a quality assurance system based on the production client of another system.
Client-specific and cross-client Customizing and master/transaction data: You select this option, for example, if you want to set up a test client based on the production client of another system.
http://help.sap.com/saphelp_46c/helpdata/EN/69/c24c4e4ba111d189750000e8322d00/frameset.htm

CRM - ECC -- SCM-APO

Hi Gurus,
I'm setting the gATP in SCM-APO. Everything is working fine in the ECC environment, i create my documents, they go to SCM-APO to do the ATP check (product allocation) and return with the confirmed quantity.
Now, we are testing the sales order capture from CRM, we tried to do some concurrent orders with the same data. The oder is created in CRM but it is not created in ECC. If I verify the order in CRM I can see the followin message:
"An error has occured in the system CTE-200I while copying the document"
"APO: Plng object ZAH_COMERCIAL, 010005005005010, 02, 40 0, 012, 0000 and basic method QUOTA have been lock ed (check not possible)"
Has anyone encountered this problem before?
Best Regards and thanks in advanced!
-Italo

Hello Hugo,
We are facing the same issue when order replicates from CRM to R/3. R/3 generates same error which throws back to order to CRM.
Please let us know if its resolved and what was done to solve it.
Regards,
Vivek

Client concept for SAP SCM APO and SAP TM

Hello,
We are installing SAP SCM APO 5.1 (SNP, gATP, DP) and SAP TM 7.0 (ramp up). Both connect via CIF to ECC 6.0 SP3. As far as my knowledge goes for CIF, both master data and transactional data is exchanged via CIF.
In ECC we have a three client concept:
100 customizing only
200 customizing + master data (golden client)
300 customizing + master data + transaction data
Can we use a similar model for TM and SCM APO as well? Should we then only connect ECC-300 to TM-300 and ECC300 to SCM-300 via CIF?
I have also heard that also some ECC customizing is transferred via CIF to SCM/TM. Is that true and does that change this model?
Regards,
Rob Veenman
SAP Basis.

Rob,
As a general rule of thumb, for each ECC client you will probably want an SCM client. From your landscape description, it is not clear to me in which clients you perform the everyday functions of development/test/production, but I guess you have already worked that out. Without knowing exactly how you manage your environment, I will say that it is probably a good idea to have active CIF connections between each of the three pairs of clients. Once you have set up a single connection between your first pair (ECC/SCM), you will find that setting up the second and third is pretty trivial.
Yes, quite a bit of ATP configuration can be CIFd across. Typically, you do this one time, and then lock the transfer of config out (there is a config setting in SCM to stop further transfer of config). From that point forward, any config that must be parallelled in both systems is usually done manually in both systems. Notable exceptions are Factory Calendars, units of measure, and Fiscal Periods, which can be pulled across from ECC to SCM any time you want via standard program.
Regards,
DB49

Setting timeout for all the web test scripts in the solution

Hello,
I have around 16 web test scripts (using VSTS 2010 ultimate version) in my project (in a solution). By default the timeout set for each request is 60 sec. I need to increase the timeout to 180 sec. Currently, I am clicking on each request and modifying
the timeout parameter from the Properties window.
Is there any common setting for timeout available which would be acting across all the scripts?
Thanks.

Hello,
We only can set Timeouts for a separate request in Visual Studio Web Test. There is no way to set Timeout for all requests in VS IDE. But you can write you own logic code using
Timeout Property in a web test plugin to set Timeout for all requests in a web test.
About how to write a web test plugin, please see:
How to: Create a Web Performance Test Plug-In
Best regards,
Amanda Zhu <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

To load data from a cube in SCM(APO) system to a cube in BI system.

Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
Meera

Hi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy

Urgent need for AP and PO test scripts/scenarios and training user manuals

Hi There,
Can anyone send me test scripts/scenarios and training user manuals for AP and PO
Please send me the docs as soon as possible on [email protected]
I will really appreciate your help.
Regards
Kush

Dear
this topics must be included in the testing scenario
1-Enter Supplier Data Enter information for a given supplier, including supplier sites/addresses
2-Create Invoice Batch: Enter information for Invoice Batch header
3-Create a Standard Invoice: Enter information for a standard invoice in an invoice batch
4-Invoice Distribution: Enter information details of a selected invoice
5-Schedule Payment Create Payment Schedule
6-Create a Credit Memo: Enter information to create a credit memo
7-Create Employee Exp:Enter information for an Employee Expense report
8:Validate an Invoice: Validate an Invoice
9-Account an Invoice: Create Accounting Entries for an Invoice
10-Create a Quick Check: Enter data to create a Quick Payment
11-Select Invoices for Payment:Enter data to create a preliminary list of invoices to pay, review the list, and do some changes.
12-Format and Print a Payment Batch: Perform tasks required to Format a payment batch
13-Confirm a Payment Batch:Perform tasks required to Confirm a payment batch
14-Transfer to General Ledger

Importing internal table data from FM to eCATT test script

Hi all,
I am working on Workflow project where by i need to post invoices related to purchase orders sent as scanned imaages. Incase all the data in the incoming invoice(scanned) is correct then i am using BAPI_INCOMING_INVOICE_CREATE to post the invoice.
But when the data is wrong, i need to give the user MIRO transaction pre-populated with the invoice details so that he manually corrects them(after verification) and posts the invoice.
I understand MIRO is an ENJOY transaction hence BDC doesn't work properly(i have tried with all kinds of options on recording and the problem comes incase of multiple POs) hence i choose to use eCATT.
The recording worksfine but my real problem is the PO data (multiple PO details for same invoice) is in table form. In all my previous objects related to eCATT we used to upload the file, hence no problem of importing tables.
But now as i'll call this test script from a function module which has all the POs in the form of internal table, i need to import this into my test script.
Please any body tell me how to proceed in this case or please suggest me a better a way to record the MIRO.
Thank you,
Lakshmi Narayana.S

Hello Raj,
First of all thank you for your inputs.
Yes, I know about Parking an invoice. even i am using it in some scenarios.
If everything on the invoice matches with the values in SAP then i am posting it using BAPI invoice_create also.
But for some scenarios like if the PO on the invoice doesnot match with actual PO then i need to create a work item in the Accounts Payable user's inbox and he will change invoice data manually (after getting confirmation and correction) and post it using MIRO.
Here i need to pre-populate the MIRO with the invoice data so that he can correct and post it.
Hence i was trying to write a BDC and as MIRO is an Enjoy transaction i thought writing a BDC is not a good idea (i tried writing BDC but had problems) hence i am using eCATT.
Hope i am clear about my problem. Any inputs to solve this are welcome.
Thanks,
Lakshmi Narayana.S

In eCATT, How to mention the values as input parameter during test script

Hi,
1. I am just learning eCATT tool. I created a Test Script by recording my transaction. But if i want to execute the recorded transaction with different data then how to store the values.
2. How to execute my Test Script created in one client to another client of same server. is it just by mentioning the target system or do we have to do anything in anothere client.
Lakshmi

Hi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e0ebec-c9da-2910-689e-b1a22a621c7f
Manoj Shakya.

Error opening a Test Script inUFT from Solution Manager

This error is the subject of a call with SAP and HP but I wondered if anyone else has come across this problem.
We work with Solution Manager 7.1 (SP11) and HP's UFT 11.53 to create automated testing. We ustilise the two free seat licences for UFT that are provided via enterprise support. We do not use HP's Quality Centre.
On some occasions when trying to open a test script for editing UFT tries to open and then closes again. The error message below is displayed in solution manager.
“External Test Tool Quick Test Professional Is Busy and Cannot Create a New Test Script”
When this happens the local cache files are wiped. We have managed to salvage some of these scripts by pasting in copies of the cache file from another PC but some we had to recreate from scratch.

If you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian

Transaction to find ecatt test script

transaction to find ecatt test script and the table which stores ecatt test script
transaction to find function group and the table which stores function group
transaction to find general text and the table which stores general text
where i should be able to change the devlopment class

Hi Avinash,
For ecatts check development class/package SECATT_DDIC and transaction SECATT.
For general text transaction is SO10 and tables are STXH and STXL.
For Object Naviagtor SE80 you can change development class.
For function groups check ENLFDIR table.
All transaction codes are stored in TSTC and TSTCT tables
Thanks
Lakshman

Test Scripts for financials modules

Hi,
I am looking for detailed test scripts covering all test scenarios for system testing in financials modules. I am interested in Purchasing, Payables, Cash Management, Projects and Fixed Assets. I also need for Receivables and Order Management.
Do some body have this please let me know. If there is any website or download place where I can get this. Please let me know.
I am looking for a test script to show the purpose and results clearly including the gl accounts involved and the results in debiting and crediting the accounts in various transactions while doing the test. For ex. when you validate a PO matched invoice in Payables which accounts get affected and how etc.
Thanks in advance
Regards,

Pl do a search for "financials test scripts" in the forum search - this has been discussed and responded to many times before :-)
HTH
Srini

Errors while running load test scripts in Oracle Load Test

I am a QA Analyst and this is my first time using the Oracle Load Test application. Acutally this is the first time I have done anything related to load test scripts. The Oracle Load Test version I am using is 9.10.0219. When I run some of the scripts with a user ramp up of 1 user per step, the load tests complete successfully. When I begin to adjust the number of VUs per step to 2 or more, I begin to get some of the following errors. By the looks of these errors can you provide any feedback as to whether these are issues with OLT or with the application I am running the load test against? Any help would be greatly appreciated.
Thanks
John
- ThinBrowserException occurred. HTTP response code: 500 Internal Server Error
- VariableNotFoundException occurred. Variable "web.jscript.httplbosinl1cccsmo_2468" not found for string: http://lbosinl1.ccc.smo.com:9595/Tmo/H5/portal/lipo_portal/{{web.jscript.httplbosinl1cccsmo_2468,Scenario}}
- VariableNotFoundException occurred. Variable "web.jscript.httplbosinl1cccsmo_5617" not found for string:
{{web.jscript.httplbosinl1cccsmo_1984,Suif_Context_Period_Date}}=
{{web.jscript.httplbosinl1cccsmo_5617,12/05/2010}}

Hi,
It looks like an application issue since you are getting a HTTP 500. The other errors relate to the fact that ti can't resolve some dynamic values in needs to extract from the resonse content since the pages are different (probably due the 500 error).
Regards,
Jamie

Reg, SCM APO Integratin Test Scripts

Similar Messages

Maybe you are looking for