Reg : Short Dump While Activating Workflow
Hi All,
This morning I added a condition step in my workflow and created two custom methods in the corresponding BO and used them in the task. Initially when i made the changes in the workflow and tested it, it was working fine. But after sometime, when I did the necessary binding and tried to activate the workflow, the workflow started resulting in short dump.
Below is the dump analysis.
SAPSQL_ARRAY_INSERT_DUPREC
The ABAP/4 Open SQL array insert results in duplicate database records.
000310 L_OTYPE EQ ORG_OBJTYPE_WORKFLOW.
000320 LOOP AT ACT_LINES.
000330 MOVE-CORRESPONDING ACT_WFDKEY TO ACT_LINES.
000340 MOVE ACT_CLIENT TO ACT_LINES-CLIENT.
000350 MODIFY ACT_LINES.
000360 ENDLOOP.
000370 ELSE.
000380 MESSAGE E280 WITH L_OTYPE RAISING INVALID_OBJECT_TYPE.
000390 ENDIF.
000400
000410 *- insert lines table
------> INSERT SWD_LINES CLIENT SPECIFIED FROM TABLE ACT_LINES.
000430 IF SY-SUBRC NE 0.
000440 MESSAGE E281 WITH SY-SUBRC 'SWD_LINES'
000450 RAISING INTERNAL_DATABASE_ERROR.
000460 ENDIF.
000470
000480 *- commit
000490 IF DO_COMMIT NE ' '.
000500 COMMIT WORK.
000510 ENDIF.
000520
000530 ENDFUNCTION.
I tried searching sdn. But all other posts were related to passing entries from internal table to DB. Also I'm not even sure if i can raise a OSS, because a few minutes back the system was working fine and all of sudden this started happening.
So can you please guide me what I am missing and how can i fix this?
Thanks & Regards,
Raj
Hi Rick,
When I get acitvate the workflow, the workflow template is gettign active & saved and after that the system results into short dump. And also when i try creating a PR and test this workflow, in SWEL, i can see the below message in RFC status field.
The ABAP/4 Open SQL array insert results in duplicate database records..
I haven't done any duplicate binding. Also I checked what you suggested. Didn't work. Also checked my newly added code. But I'm not accessing database directly anywhere. All is done via SAP standard function module.
Even if i try to display this workflow in PFTC, the system is resulting in the same short dump.
What could be the reason?
Regards,
Raj
Edited by: Raj Karunanidhi on Feb 23, 2010 5:30 AM
Similar Messages
-
Short dump while activating process chain
Please let me know the cause of short dump while activating process chain.. when trying to activate local process chains in metachain it is causing dump
Can you share more details about error.
Have you done any changes to local chain? or is this is new chain?
Try to remove meta chain from schedule, later activate your local chain and meta chain.
schedule your meta chain. -
Short Dump while activating Transformation through Program
HI All,
I am getting short dump while activating - Inactive Transformation through Program RSDG_TRFN_ACTIVATE.
However while i can activate single Transformation but if run without selection, I am getting this dump.
Short Description of Dump -
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_RSAR_FORMULAS==============CP
Application Component BW-WHM-DST
Date and Time
Please Guide.
PrasadHi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin -
DBIF_REPO_SQL_ERROR short dumps while activating data in ODS
Hi All,
We are using BW3.5 with Oracle 9.2 on AIX 5.3 box, from the past few days we are getting DBIF_REPO_SQL_ERROR short dumps frequently while activating data in ODS.
Runtime Error DBIF_REPO_SQL_ERROR
Date and Time 08.01.2008 13:01:08
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_REPO_SQL_ERROR" C
"SAPLRSSM_PROCESS" or "LRSSM_PROCESSF04"
"CHECK_IF_ANALYZE_IS_NESSESSARY"
System environment
SAP Release.............. "640"
Application server....... "psapdb"
Network address.......... "158.58.65.11"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00CD615C4C00"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 22
Short dump setting....... "full"
Database server.......... "psapdb"
Database type............ "ORACLE"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Oct 29 2006 20:49:57"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "155"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 24576
MM Used.................. 6604384
MM Free.................. 1772536
SAP Release.............. "640"
User and Transaction
Client.............. 200
User................ "R3REMOTE"
Language key........ "E"
Transaction......... " "
Program............. "SAPLRSSM_PROCESS"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
"CHECK_IF_ANALYZE_IS_NESSESSARY".
The main program was "RSPROCESS ".
The termination occurred in line 1143 of the source code of the (Include)
program "LRSSM_PROCESSF04"
of the source code of program "LRSSM_PROCESSF04" (when calling the editor
11430).
The program "SAPLRSSM_PROCESS" was started as a background job.
Job name........ "BI_PROCESS_ODSACTIVAT"
Job initiator... "RPRIYANKA"
Job number...... 02010102
Also we have a failed job here. Here is the job log.
Job log overview for job: BI_PROCESS_ODSACTIVAT / 02010102
Date Time Message text
08.01.2008 13:01:00 Job started
08.01.2008 13:01:00 Step 001 started (program RSPROCESS, variant &0000000000188, user ID R3REMOTE)
08.01.2008 13:01:02 Activation is running: Data target HBCS_O25, from 1,758 to 1,767
08.01.2008 13:01:02 Data to be activated successfully checked against archiving objects
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 ANALYZE TABLE "/BIC/AHBCS_O2540" DELETE
08.01.2008 13:01:02 STATISTICS
08.01.2008 13:01:02 SQL-END: 01/08/2008 13:01:02 00:00:00
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
08.01.2008 13:01:02 'SAPBWP', TABNAME => '"/BIC/AHBCS_O2540"',
08.01.2008 13:01:02 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
08.01.2008 13:01:02 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
08.01.2008 13:01:02 GRANULARITY => 'ALL', CASCADE => TRUE ); END;
08.01.2008 13:01:05 SQL-END: 01/08/2008 13:01:05 00:00:03
08.01.2008 13:01:05 SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
08.01.2008 13:01:05 System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
08.01.2008 13:01:08 ABAP/4 processor: DBIF_REPO_SQL_ERROR
08.01.2008 13:01:08 Job cancelled
Listener is working fine, Checked the RFC connections, Tried restarting the system, tried adding space to the TEMP tablespace as well as PSAPBWP, but they didn't work.
Please help.The problem got solved as there were DB errors like ORA-01114: IO error writing block to file 256 (block # 126218).
Here the point to be notes is file 256. The number greater than 255 indicates a temp datafile. This indicates an issue with PSAPTEMP tablespace. When checked on PSAPTEMP tablespace, one of the filesystems where one temp data file sitting was full. The filesystem was 100% full. This will prevent the temp datafile to grow and shrink as and when required.
So, adding more space to the filesystem solved the problem.
Thanks to everyone who have shown interest in solving my problem. -
Short Dump while Activating a Heirarchy
Hi Experts,
I have a hierarchy which is in M version, I am trying to copy hierarchy from Quality to Dev system.
The hierarchy in DEV system is in M version. When I try to activate the Hierarchy I am getting a short dump which I am not able to understand.
I have tried also with the ABAP programe to activate it but still I am getting this.
Sorry to paste all the dump but can any one advise what could be reasons behind heirarchy not getting activated.
Thanks,
Tati.
Please find the Dump message.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
Information on where terminated
Termination occurred in the ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" -
in "CALL_MESSAGE".
The main program was "RSSH_HIERM_START_NEU ".
In the source code you have the termination point in line 11
of the (Include) program "CL_RSSH_MESSAGE_HANDLER=======CM003".
Source Code Extract
Line SourceCde
1 METHOD call_message .
2
3 FIELD-SYMBOLS: <l_s_msg> TYPE gt_s_msg.
4
5 READ TABLE p_t_msg INDEX 1 ASSIGNING <l_s_msg>.
6 IF sy-subrc <> 0.
7 MESSAGE x000.
8 ENDIF.
9
10 <l_s_msg>-handled = rs_c_true.
>>>>> MESSAGE ID <l_s_msg>-msgid TYPE <l_s_msg>-msgty NUMBER <l_s_msg>-msgno
12 WITH <l_s_msg>-msgv1 <l_s_msg>-msgv2 <l_s_msg>-msgv3 <l_s_msg>-msgv4.
13
14
15 ENDMETHOD. "CALL_MESSAGEHi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin -
Short Dump while executing New Hire (action type) in PA40
Hi All,
i am getting short dump while executing PA40 for new hire action type can anyone look into this and guide as i am new to HCM.
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time 21.08.2014 14:07:03
Short text
Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
include "/1PAPAXX/HDR_21000AO01 " in
line 52:
""LV_LENGTH" has already been declared"
The include has been created and last changed by:
Created by: "HCM04 "
Last changed by: "HCM03 "
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program /1PAPAXX/HDR_21000A :
""LV_LENGTH" has already been declared"
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP Release..... 731
SAP Basis Level. 0007
Application server... "dc-ds-erp"
Network address...... "172.16.23.111"
Operating system..... "Linux"
Release.............. "3.0.13-0.27-default"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dc-ds-erp"
Database type..... "ORACLE"
Database name..... "ECD"
Database user ID.. "SAPSR3"
Terminal.......... "NLC-HP"
Char.set.... "C"
SAP kernel....... 720
created (date)... "Sep 14 2013 06:16:24"
create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
Database version. "OCI_112, 11.2.0.3.0, V1, default"
Patch level. 500
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 720
Operating system..... "Linux 2.6, Linux 3"
Memory consumption
Roll.... 0
EM...... 37708200
Heap.... 0
Page.... 106496
MM Used. 4666776
MM Free. 3709976
User and Transaction
Client.............. 210
User................ "HCM03"
Language key........ "E"
Transaction......... "PA40 "
Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
EPP Connection ID....... 00000000000000000000000000000000
EPP Caller Counter...... 0
Program............. "SAPFP50M"
Screen.............. "MP000000 1000"
Screen Line......... 3
Debugger Active..... "none"
Information on where terminated
Termination occurred in the ABAP program "SAPFP50M" - in
"GET_HEADER_WITH_TCLAS".
The main program was "MP000000 ".
In the source code you have the termination point in line 146
of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
EXPORTING
118
DHDID = FHD_HID
119
BEGDA = BEGDA
120
TCLAS = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
* MOLGA =
125
P0001 = P0001
126
PERNR = PSPAR-PERNR
127
IMPORTING
128
PROG = HEADER_PROG
129
DNUM = HEADER_DYNNR
130
EXCEPTIONS
131
HEADER_DEACTIVATED = 1
132
HEADER_UNKNOWN = 2
133
HEADER_GENERATE_DEACTIVATED = 3
134
HEADER_GENERATE_FAILED = 4
135
INTERNAL_ERROR = 5
136
OTHERS = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
HEADER_PROG = 'SAPMP50A'.
141
HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL. "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL. "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.Hi,
Error Log: Syntax error
""LV_LENGTH" has already been declared"
please check LV_LENGTH variable declaration.
It may be declared more once! -
Short dump while executing info package in 3.5 data flow?
Hi,
i am getting short dump while executing info package while executing info package. it was working perfectly 2 days back suddenly it is giving this problem. it is a full load for info object text data and i have only 600 records. when i tried with " only info package" it is working perfectly n bringing the data into PSA. But when i use "PSA and the into data target" it is giving short dump.
i replicated Data source and also i activated transfer rules, update rules still it is not working. When i check with another info objects it is working perfectly fine. i dont know what is wrong with only particular info object.
Please find attached short dump.
ThanksHi,
When you load transaction data I think there is a deadlock.
Check in the process overview (transaction SM50) the waiting processes are in program SAPLSENA .
The program SAPLSENA is the lock handler tool.
Also check if ACR is running on this target while your load is happening.
Check in SM12 if there are any lock entries for the Infoobject to which you are loading data and on RSICCONT table .
Try reloading after deleting the locks manually.
Regards. -
SRM Create Confirmation - Short Dump while adding Approver
Dear Experts.
Currently I am facing following issue.
Issue:
In SRM “Create Confirmation” Screen, when user click on check button and after that if user tries to add approver in approval tab then it is going to short dump. Please find the short dump info:
Category ABAP Programming Error
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_OS_OBJECT_NOT_FOUND
ABAP Program /SAPSRM/CL_WF_PROCESS_MANAGER=CP
Application Component SRM-EBP-WFL
I had analyzed this issue and following points are my findings.
We have written code in BBP_DOC_CHECK_BADI to check the approver is added or not in approval tab. For this purpose we are using METHOD lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info (Here lo_conf_adv is object of interface /sapsrm/if_pdo_bo_conf_adv) and the instance of lo_conf_adv is getting from METHOD /sapsrm/cl_pdo_fact_conf_adv=>get_buffered_instance By pasing Doc GUID.
As per my analysis, the above code only causing the short dump while adding the approver in aproval tab. More importantly the CHECK BADI (BBP_DOC_CHECK_BADI) is not triggered while adding the approver.
If I comment this code (which is mentioned in point 1), then the application is not giving any short dump and adding approver successfully.
I tried to find SAP notes but there are no SAP notes related to this issue. Also, I tried to find alternate METHOD to replace lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info but I have not got relevant method. Please let me know if there is any solution for this issue.
Thanks & Regards,
Sasidhar VHi Ritesh,
Thanks for the fast response.
We are using Process Controlled Workflow. In Doc Check BADI, we are checking the respective approver is added or not in approval tab in "Create Confirmation" Screen. While creating confirmation, when user click on "CHECK" button and If respective approver is not added then throwing error message.
We are using Method "GET_PROCESS_INFO" to get approval information only. when this method is triggered in Check BADI then it is doing respective validations and displaying messages. After that when we try to add approver then the system trying to read entry from table "/SAPSRM/D_WF_003" by passing OID to LEVEL_GUID. But there is no entry in this table and that's why it is giving short dump.
Can you please let me know why it is reading entry in that table and why entry is not exist.
FYI, If I don't use method "GET_PROCESS_INFO" in check BADI then respective code where short dump happening is not triggering (System is not trying to read entry from /SAPSRM/D_WF_003 table) and so it is not giving short dump.
Thanks & Regards,
Sasidhar V. -
SHORT DUMP WHILE EXECUTING DTP.
Hi Gurus,
I have got a short dump while executing DTP the Error is as Follows.
Runtime Error: MESSAGE_TYPE_X.
Reasons for Error: 1.The installation of the SAP GUI on the present server is faulty or obselete
2.There is a error in the application program
And i have sent the sreen shot of the Short Dump to BASIS TEAM and they have replied me that they have to install some patches and it will take some time.
But i have no much time and i have to someway or the other execute the DTP and load the data.
Is there any shortcuts for this i mean to say without the involvement of Basis team that i can do in th BI System
Regards
Amar.Hi Amar,
If the problem is with with System itself, how can we all have a short cut in that case. You may give it another trial, but you have to wait for the patches to be applied. Ask your basis team to get it done ASAP.
Thanks..
Shambhu -
Short dump while export grid alv with subtotals.
hello,
its strange and i face first time that my grid alv report goin to short dump while i done subtotals and send it to local file thru export.
if am not doing subtotals then export it to local file it goin fine.
whats it has problem plz give ur helping hends.
here i copied a dump msg also.
Short text
Error at assignment: Overwritten protected field.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
A new value is to be assigned to the field "<L_UNIT>", although this field is
entirely or partly protected against changes.
The following are protected against changes:
- Character literals or numeric literals
- Constants (CONSTANTS)
- Parameters of the category IMPORTING REFERENCE for functions and
methods
- Untyped field symbols not yet assigned a field using ASSIGN
- TABLES parameters if the actual parameter is protected against changes
- USING reference parameters and CHANGING parameters for FORMs, if the
actual parameter is protected against changes and
- Accesses using field symbols if the field assigned using ASSIGN is
protected (or partially protected, e.g. key components of an internal
table with the type SORTED or HASHED TABLE) against changes
- Accesses using references, if the field bound to the reference is
protected (or partially protected) against changes
- External write accesses to READ-ONLY attributes,
- Content of a shared object area instance accessed using a shared lock
(ATTACH_FOR_READ).
regards amit.& Object Id : &
& Object Name : &
& Function Module Name : Sales Register &
& Transaction Code : &
& Author : Amit gujargoud &
& Module Name : SD &
& Sub-Module : &
& Program Type : Dialog Create Date : 02/02/2007 &
& SAP Release : ECC 6.0 &
& Description : Sales Register - Detail &
*& Report ZSALESREGISTER
REPORT zsd_salesregister.
*& TYPE-POOLS
TYPE-POOLS : slis.
*& TABLES
TABLES: vbrp, "Billing Document: Item Data
vbrk, "Billing Document: Header Data
lips, "SD document: Delivery: Item data
lfa1, "Vendor Master (General Section)
kna1, "General Data in Customer Master
vbak, "Sales Document: Header Data
vbpa, "Sales Document: Partner (Gopal)
likp, "SD Document: Delivery Header Data
vbap, "Sales Document: Item Data
vbkd, "Sales Document: Business Data
mara. "General Material Data
*& DATA DECLARATION
DATA: BEGIN OF i_report OCCURS 100,
vbeln LIKE vbrp-vbeln, "Billing Document
posnr LIKE vbrp-posnr,
matnr LIKE mara-matnr ,
aubel LIKE vbrp-aubel, "Sales Document
fkimg LIKE vbrp-fkimg, "Actual billed quantity
vrkme LIKE vbrp-vrkme, "Sales unit
arktx LIKE vbrp-arktx, "Short text for sales order item
vgbel LIKE vbrp-vgbel, "Doc number of the reference document
werks LIKE vbap-werks,
vkgrp LIKE vbrp-vkgrp,
fklmg LIKE vbrp-fklmg,
volum LIKE vbrp-volum,
vkbur LIKE vbrp-vkbur,
vtweg_auft LIKE vbrp-vtweg_auft,
auart LIKE vbak-auart,
tabix LIKE sy-tabix, "Internal Table, Current Row Index
name1 LIKE kna1-name1, "Name1
exnum LIKE j_1iexchdr-exnum, "Official Excise Document Number
orqty TYPE p DECIMALS 0,
penqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
openqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
ean11 LIKE lips-ean11, "International Article No(EAN/UPC)
volum LIKE lips-volum,
lgmng LIKE lips-lgmng,
traid LIKE likp-traid,
ort01 LIKE lfa1-ort01, "City
lifnr LIKE lfa1-lifnr, "A/c Number of Vendor or Creditor
netwr LIKE vbrp-netwr, "Net val of bill item in doc currency
kunnr LIKE vbak-kunnr, "Sold-to party
adrnr LIKE vbpa-adrnr, "Address
city1 LIKE adrc-city1, "City
tprtr LIKE lfa1-name1, "Name 1
knumv LIKE konv-knumv, "Number of the document condition
kposn LIKE konv-kposn,
rate LIKE konv-kbetr, "Rate (cond amount or percentage)
bas_val LIKE konv-kwert, "Rate (cond amount or percentage)
exc_duty LIKE konv-kwert, "Rate (cond amount or percentage)
ed_cess LIKE konv-kwert, "Rate (cond amount or percentage)
freight LIKE konv-kwert, "Rate (cond amount or percentage)
pack LIKE konv-kwert, "Rate (cond amount or percentage)
cst LIKE konv-kwert, "Rate (cond amount or percentage)
vat LIKE konv-kwert, "Rate (cond amount or percentage)
ent_tax LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv_round LIKE konv-kwert, "Rate (cond amount or percentage)
disc_tot LIKE konv-kwert, "Discount total - Z001 to Z020
vat_rate LIKE konv-kbetr,
cst_rate LIKE konv-kbetr,
lst_rate LIKE konv-kbetr,
mwsbk LIKE vbrk-mwsbk,
bas_tax LIKE konv-kwert,
dev_tax LIKE konv-kwert,
tcs_tax LIKE konv-kwert,
bas_tot LIKE konv-kwert,
lst LIKE konv-kwert,
vkorg LIKE vbak-vkorg,
mvgr1 LIKE mvke-mvgr1,
mvgr2 LIKE mvke-mvgr2,
mvgr3 LIKE mvke-mvgr3,
mvgr4 LIKE mvke-mvgr4,
mvgr5 LIKE mvke-mvgr5,
text1 LIKE tvm1t-bezei,
text2 LIKE tvm1t-bezei,
text3 LIKE tvm1t-bezei,
text4 LIKE tvm1t-bezei,
text5 LIKE tvm1t-bezei,
bismit_area TYPE p DECIMALS 4, " Size (L*B) in mm
face_area TYPE p DECIMALS 2, " Face Area Declaration
notional_area TYPE p DECIMALS 2,
stock_pcs TYPE p , " decimals 3 Pcs of Stock
labst LIKE mard-labst, " Valuated Unrestricted-Use Stock
bismt LIKE mara-bismt, " Size (L*B) in mm
normt LIKE mara-normt, " Industry Standard Description
temp TYPE p DECIMALS 2,
temp1 TYPE p DECIMALS 2,
temp2 TYPE p DECIMALS 2,
temp3 TYPE p DECIMALS 2,
temp4 TYPE p DECIMALS 2,
temp5 TYPE p DECIMALS 2,
temp6 TYPE p DECIMALS 2,
temp7 TYPE p DECIMALS 2,
temp8 TYPE p DECIMALS 2,
temp9 TYPE p DECIMALS 2,
temp10 TYPE p DECIMALS 2,
temp11 TYPE p DECIMALS 2,
temp12 TYPE p DECIMALS 2,
temp13 TYPE p DECIMALS 0,
temp14 TYPE p DECIMALS 0,
temp15 TYPE p DECIMALS 0,
temp16 TYPE p DECIMALS 2,
temp17 TYPE p DECIMALS 2,
temp18 TYPE p DECIMALS 2,
temp19 TYPE p DECIMALS 2,
temp20 TYPE p DECIMALS 2,
temp21 TYPE p DECIMALS 2,
waybill(20) TYPE c,
audat LIKE vbak-audat, "Document Date (Date Received/Sent)
lgort LIKE vbap-lgort, "Storage location
lgobe LIKE t001l-lgobe, "Description of storage location
erdat LIKE vbrk-erdat, "Date on which the record was created
exdat LIKE j_1iexchdr-exdat, "Excise Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
acdt LIKE likp-wadat_ist, "Actual goods movement date
fkdat LIKE vbrk-fkdat,
ship LIKE kna1-name1, "Name1 (Ship-to party)
fksto LIKE vbrk-fksto,
fkart LIKE vbrk-fkart,
bezei LIKE t005u-bezei,
vtweg LIKE vbak-vtweg,
spart LIKE vbak-spart,
matkl LIKE mara-matkl,
wgbez LIKE t023t-wgbez,
mtart LIKE mara-mtart,
labor LIKE mara-labor,
ferth LIKE mara-ferth,
lbtxt LIKE t024x-lbtxt,
niels LIKE kna1-niels,
kukla LIKE kna1-kukla,
desc LIKE tvkbt-bezei,
brsch LIKE kna1-brsch,
zeinr LIKE mara-zeinr,
bzirk LIKE vbrk-bzirk,
area_desc LIKE tnlst-bezei,
dist_desc TYPE tkukt-vtext,
taluka_desc TYPE t016t-brtxt,
sales_desc TYPE tvgrt-bezei,
kmein LIKE konv-kmein, "Sales Unit
challan LIKE likp-vbeln,
END OF i_report.
data for MVKE
DATA: BEGIN OF i_report_mvke OCCURS 0,
vbeln LIKE vbrp-vbeln, "Billing Document
aubel LIKE vbrp-aubel, "Sales Document
vkorg LIKE vbak-vkorg,
matnr LIKE mara-matnr ,
vtweg LIKE vbak-vtweg,
END OF i_report_mvke.
***********************TEMP COPY
DATA: BEGIN OF i_report_temp OCCURS 0,
vbeln LIKE vbrp-vbeln, "Billing Document
posnr LIKE vbrp-posnr,
matnr LIKE mara-matnr ,
aubel LIKE vbrp-aubel, "Sales Document
fkimg LIKE vbrp-fkimg, "Actual billed quantity
vrkme LIKE vbrp-vrkme, "Sales unit
arktx LIKE vbrp-arktx, "Short text for sales order item
vgbel LIKE vbrp-vgbel, "Doc number of the reference document
werks LIKE vbap-werks,
vkgrp LIKE vbrp-vkgrp,
fklmg LIKE vbrp-fklmg,
volum LIKE vbrp-volum,
vkbur LIKE vbrp-vkbur,
vtweg_auft LIKE vbrp-vtweg_auft,
auart LIKE vbak-auart,
tabix LIKE sy-tabix, "Internal Table, Current Row Index
name1 LIKE kna1-name1, "Name1
exnum LIKE j_1iexchdr-exnum, "Official Excise Document Number
orqty TYPE p DECIMALS 0,
penqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
openqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
ean11 LIKE lips-ean11, "International Article No(EAN/UPC)
volum LIKE lips-volum,
lgmng LIKE lips-lgmng,
traid LIKE likp-traid,
ort01 LIKE lfa1-ort01, "City
lifnr LIKE lfa1-lifnr, "A/c Number of Vendor or Creditor
netwr LIKE vbrp-netwr, "Net val of bill item in doc currency
kunnr LIKE vbak-kunnr, "Sold-to party
adrnr LIKE vbpa-adrnr, "Address
city1 LIKE adrc-city1, "City
tprtr LIKE lfa1-name1, "Name 1
knumv LIKE konv-knumv, "Number of the document condition
kposn LIKE konv-kposn,
rate LIKE konv-kbetr, "Rate (cond amount or percentage)
bas_val LIKE konv-kwert, "Rate (cond amount or percentage)
exc_duty LIKE konv-kwert, "Rate (cond amount or percentage)
ed_cess LIKE konv-kwert, "Rate (cond amount or percentage)
freight LIKE konv-kwert, "Rate (cond amount or percentage)
pack LIKE konv-kwert, "Rate (cond amount or percentage)
cst LIKE konv-kwert, "Rate (cond amount or percentage)
vat LIKE konv-kwert, "Rate (cond amount or percentage)
ent_tax LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv_round LIKE konv-kwert, "Rate (cond amount or percentage)
disc_tot LIKE konv-kwert, "Discount total - Z001 to Z020
vat_rate LIKE konv-kbetr,
cst_rate LIKE konv-kbetr,
lst_rate LIKE konv-kbetr,
mwsbk LIKE vbrk-mwsbk,
bas_tax LIKE konv-kwert,
dev_tax LIKE konv-kwert,
tcs_tax LIKE konv-kwert,
bas_tot LIKE konv-kwert,
lst LIKE konv-kwert,
vkorg LIKE vbak-vkorg,
mvgr1 LIKE mvke-mvgr1,
mvgr2 LIKE mvke-mvgr2,
mvgr3 LIKE mvke-mvgr3,
mvgr4 LIKE mvke-mvgr4,
mvgr5 LIKE mvke-mvgr5,
text1 LIKE tvm1t-bezei,
text2 LIKE tvm1t-bezei,
text3 LIKE tvm1t-bezei,
text4 LIKE tvm1t-bezei,
text5 LIKE tvm1t-bezei,
bismit_area TYPE p DECIMALS 4, " Size (L*B) in mm
face_area TYPE p DECIMALS 2, " Face Area Declaration
notional_area TYPE p DECIMALS 2,
stock_pcs TYPE p , " decimals 3 Pcs of Stock
labst LIKE mard-labst, " Valuated Unrestricted-Use Stock
bismt LIKE mara-bismt, " Size (L*B) in mm
normt LIKE mara-normt, " Industry Standard Description
temp TYPE p DECIMALS 2,
temp1 TYPE p DECIMALS 2,
temp2 TYPE p DECIMALS 2,
temp3 TYPE p DECIMALS 2,
temp4 TYPE p DECIMALS 2,
temp5 TYPE p DECIMALS 2,
temp6 TYPE p DECIMALS 2,
temp7 TYPE p DECIMALS 2,
temp8 TYPE p DECIMALS 2,
temp9 TYPE p DECIMALS 2,
temp10 TYPE p DECIMALS 2,
temp11 TYPE p DECIMALS 2,
temp12 TYPE p DECIMALS 2,
temp13 TYPE p DECIMALS 0,
temp14 TYPE p DECIMALS 0,
temp15 TYPE p DECIMALS 0,
temp16 TYPE p DECIMALS 2,
temp17 TYPE p DECIMALS 2,
temp18 TYPE p DECIMALS 2,
temp19 TYPE p DECIMALS 2,
temp20 TYPE p DECIMALS 2,
temp21 TYPE p DECIMALS 2,
waybill(20) TYPE c,
audat LIKE vbak-audat, "Document Date (Date Received/Sent)
lgort LIKE vbap-lgort, "Storage location
lgobe LIKE t001l-lgobe, "Description of storage location
erdat LIKE vbrk-erdat, "Date on which the record was created
exdat LIKE j_1iexchdr-exdat, "Excise Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
acdt LIKE likp-wadat_ist, "Actual goods movement date
fkdat LIKE vbrk-fkdat,
ship LIKE kna1-name1, "Name1 (Ship-to party)
fksto LIKE vbrk-fksto,
fkart LIKE vbrk-fkart,
bezei LIKE t005u-bezei,
vtweg LIKE vbak-vtweg,
spart LIKE vbak-spart,
matkl LIKE mara-matkl,
wgbez LIKE t023t-wgbez,
mtart LIKE mara-mtart,
labor LIKE mara-labor,
ferth LIKE mara-ferth,
lbtxt LIKE t024x-lbtxt,
niels LIKE kna1-niels,
kukla LIKE kna1-kukla,
desc LIKE tvkbt-bezei,
brsch LIKE kna1-brsch,
zeinr LIKE mara-zeinr,
bzirk LIKE vbrk-bzirk,
area_desc LIKE tnlst-bezei,
dist_desc TYPE tkukt-vtext,
taluka_desc TYPE t016t-brtxt,
sales_desc TYPE tvgrt-bezei,
kmein LIKE konv-kmein, "Sales Unit
challan LIKE likp-vbeln,
END OF i_report_temp.
DATA: BEGIN OF i_vbap OCCURS 0 ,
posnr LIKE vbap-posnr,
vbeln LIKE vbap-vbeln ,
matnr LIKE vbap-matnr ,
werks LIKE vbap-werks,
kwmeng LIKE vbap-kwmeng,
lgort LIKE vbap-lgort,
matkl LIKE mara-matkl,
wgbez LIKE t023t-wgbez,
mtart LIKE mara-mtart,
END OF i_vbap .
DATA : w_temp_cal(20) TYPE c.
DATA : w_face_area TYPE p DECIMALS 4,
w_notinal_area TYPE p DECIMALS 4.
**MVKE
DATA: BEGIN OF itab_mvke OCCURS 0,
matnr LIKE mvke-matnr,
vkorg LIKE vbak-vkorg,
vtweg LIKE mvke-vtweg,
mvgr1 LIKE mvke-mvgr1,
mvgr2 LIKE mvke-mvgr2,
mvgr3 LIKE mvke-mvgr3,
mvgr4 LIKE mvke-mvgr4,
mvgr5 LIKE mvke-mvgr5,
END OF itab_mvke.
**TVM1T
DATA : BEGIN OF itab_tvm1t OCCURS 0,
spras LIKE tvm1t-spras,
mvgr1 LIKE tvm1t-mvgr1,
bezei LIKE tvm1t-bezei,
END OF itab_tvm1t.
DATA : BEGIN OF itab_tvm2t OCCURS 0,
spras LIKE tvm2t-spras,
mvgr2 LIKE tvm2t-mvgr2,
bezei LIKE tvm2t-bezei,
END OF itab_tvm2t.
DATA : BEGIN OF itab_tvm3t OCCURS 0,
spras LIKE tvm3t-spras,
mvgr3 LIKE tvm3t-mvgr3,
bezei LIKE tvm3t-bezei,
END OF itab_tvm3t.
DATA : BEGIN OF itab_tvm4t OCCURS 0,
spras LIKE tvm4t-spras,
mvgr4 LIKE tvm4t-mvgr4,
bezei LIKE tvm4t-bezei,
END OF itab_tvm4t.
DATA : BEGIN OF itab_tvm5t OCCURS 0,
spras LIKE tvm5t-spras,
mvgr5 LIKE tvm5t-mvgr5,
bezei LIKE tvm5t-bezei,
END OF itab_tvm5t.
DATA: itab_t024x TYPE STANDARD TABLE OF t024x WITH HEADER LINE,
it_report LIKE LINE OF i_report OCCURS 0,
i_mvke LIKE LINE OF itab_mvke OCCURS 0.
**VBKD
DATA: BEGIN OF i_vbkd OCCURS 0 ,
vbeln LIKE vbkd-vbeln ,
posnr LIKE vbkd-posnr ,
bzirk LIKE vbkd-bzirk ,
END OF i_vbkd .
DATA: BEGIN OF i_lips OCCURS 0,
vbeln LIKE lips-vbeln,
ean11 LIKE lips-ean11,
volum LIKE lips-volum,
lgmng LIKE lips-lgmng,
waybill(20) TYPE c,
END OF i_lips.
DATA: BEGIN OF i_vbrk OCCURS 0,
vbeln LIKE vbrk-vbeln,
rfbsk LIKE vbrk-rfbsk, "Status for transfer to accounting
erdat LIKE vbrk-erdat, "Dt on which the record was created
fkdat LIKE vbrk-fkdat, "CHANGE MADE BY PARTHA RAHAMAN
fksto LIKE vbrk-fksto, "GOPAL:: CANCELLED DOC. DO NOT PRNT.
netwr LIKE vbrk-netwr,
fkart LIKE vbrk-fkart, "Gopal:when billng typ=s1 do not pnt 1jul
knumv LIKE vbrk-knumv,
mwsbk LIKE vbrk-mwsbk,
bzirk LIKE vbrk-bzirk,
vtweg LIKE vbrk-vtweg,
spart LIKE vbrk-spart,
END OF i_vbrk.
*structure for MARD Table by kalika
DATA : BEGIN OF itab_mard OCCURS 0,
matnr LIKE mard-matnr,
werks LIKE mard-werks,
labst LIKE mard-labst, " Valuated Unrestricted-Use Stock
lgort LIKE mard-lgort, " Storage Location
END OF itab_mard.
*structure for MARD Table by kalika
DATA:BEGIN OF i_kna1 OCCURS 0,
vbeln LIKE vbak-vbeln,
name1 LIKE kna1-name1,
kunnr LIKE kna1-kunnr,
regio LIKE kna1-regio,
bezei LIKE t005u-bezei,
land1 LIKE kna1-land1,
vkgrp LIKE vbak-vkgrp,
niels LIKE kna1-niels,
kukla LIKE kna1-kukla,
brsch LIKE kna1-brsch,
vkbur LIKE vbak-vkbur,
END OF i_kna1.
DATA:BEGIN OF i_t005u OCCURS 0,
spras LIKE t005u-spras,
land1 LIKE t005u-land1,
bland LIKE t005u-bland,
bezei LIKE t005u-bezei,
END OF i_t005u.
DATA:BEGIN OF i_tnlst OCCURS 0,
spras LIKE t005u-spras,
niels LIKE tnlst-niels,
bezei LIKE t005u-bezei,
END OF i_tnlst.
DATA:BEGIN OF itab_tkukt OCCURS 0,
spras LIKE tkukt-spras,
kukla LIKE tkukt-kukla,
vtext LIKE tkukt-vtext,
END OF itab_tkukt.
DATA : BEGIN OF itab_t016t OCCURS 0,
spras LIKE t016t-spras,
brsch LIKE t016t-brsch,
brtxt LIKE t016t-brtxt,
END OF itab_t016t.
DATA : BEGIN OF itab_tvgrt OCCURS 0,
spras LIKE tvgrt-spras,
vkgrp LIKE tvgrt-vkgrp,
bezei LIKE tvgrt-bezei,
END OF itab_tvgrt.
*DATA: i_t005u TYPE STANDARD TABLE OF t005u WITH HEADER LINE.
DATA:BEGIN OF i_kna2 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1, " For Ship-to-Party
END OF i_kna2.
DATA:BEGIN OF i_vbak OCCURS 0,
vbeln LIKE vbak-vbeln,
vbtyp LIKE vbak-vbtyp,
audat LIKE vbak-audat,
auart LIKE vbak-auart,
vtweg LIKE vbak-vtweg,
spart LIKE vbak-spart,
vkbur LIKE vbak-vkbur,
vkorg LIKE vbak-vkorg,
END OF i_vbak.
DATA:BEGIN OF i_adrc OCCURS 0,
vbeln LIKE vbpa-vbeln,
kunnr LIKE kna1-kunnr,
city1 LIKE adrc-city1,
name1 LIKE kna1-name1, "Name1 (Ship-to party)
END OF i_adrc.
DATA:BEGIN OF i_lfa1 OCCURS 0,
lifnr LIKE vbpa-lifnr,
vbeln LIKE vbpa-vbeln,
name1 LIKE lfa1-name1,
END OF i_lfa1.
DATA : BEGIN OF it_knumv OCCURS 0,
vbeln LIKE vbrk-vbeln,
knumv LIKE vbrk-knumv,
END OF it_knumv.
DATA : BEGIN OF it_rate OCCURS 0,
ksteu LIKE konv-ksteu, "Condition control
knumv LIKE konv-knumv, "Number of the document condition
kschl LIKE konv-kschl, "Condition type
kbetr LIKE konv-kbetr, "Rate (condition amount or percentage)
kwert LIKE konv-kwert, "Condition value
kposn LIKE konv-kposn,
kmein LIKE konv-kmein, "Sales Unit
END OF it_rate.
DATA: BEGIN OF itab_exnum OCCURS 0,
exnum LIKE j_1iexchdr-exnum, "Official Excise Document Number
exdat LIKE j_1iexchdr-exdat, "Excise Document Date
rdoc LIKE j_1iexchdr-rdoc, "Reference Document 1
status LIKE j_1iexchdr-status,
END OF itab_exnum.
DATA: BEGIN OF itab_qty OCCURS 0,
kwmeng LIKE vbap-kwmeng,
vbeln LIKE vbap-vbeln,
lgort LIKE vbap-lgort,
END OF itab_qty.
*DATA: BEGIN OF i_stloc OCCURS 0,
lgort LIKE t001l-lgort,
lgobe LIKE t001l-lgobe,
END OF i_stloc.
DATA:t_line LIKE STANDARD TABLE OF tline INITIAL SIZE 0
WITH HEADER LINE,
" itab_tvkbt LIKE STANDARD TABLE OF tvkbt WITH HEADER LINE,
w_tdname LIKE thead-tdname.
DATA : BEGIN OF itab_tvkbt OCCURS 0,
spras LIKE tvkbt-spras,
vkbur LIKE tvkbt-vkbur,
bezei LIKE tvkbt-bezei,
END OF itab_tvkbt.
DATA: BEGIN OF i_exchdr OCCURS 0,
exnum LIKE j_1iexchdr-exnum,
exdat LIKE j_1iexchdr-exdat,
rdoc LIKE j_1iexchdr-rdoc,
END OF i_exchdr.
DATA: BEGIN OF i_likp OCCURS 0,
vbeln LIKE likp-vbeln,
wadat_ist LIKE likp-wadat_ist,
traid LIKE likp-traid,
bolnr LIKE likp-bolnr,
END OF i_likp.
DATA: BEGIN OF i_mara OCCURS 0,
matnr LIKE mara-matnr,
matkl LIKE mara-matkl,
mtart LIKE mara-mtart,
labor LIKE mara-labor,
wgbez LIKE t023t-wgbez,
bismt LIKE mara-bismt,
normt LIKE mara-normt,
ferth LIKE mara-ferth,
zeinr LIKE mara-zeinr,
extwg LIKE mara-extwg,
spart LIKE mara-spart,
END OF i_mara.
DATA: BEGIN OF i_t023t OCCURS 0,
matkl LIKE t023t-matkl,
wgbez LIKE t023t-wgbez,
END OF i_t023t.
DATA : var_length(20) TYPE c,
var_breadth(20) TYPE c.
DATA: p_w_value LIKE konv-kwert.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv, " Event for Table to creater fieldcatalog
wa_fieldcat LIKE LINE OF it_fieldcat, " Work Area for table field catalog
lt_top_of_page TYPE slis_t_listheader, " Header table for top of page
i_layout TYPE slis_layout_alv . " It will fill the layout
gt_event TYPE slis_t_event. " Table Event
*DATA :
"itab_tnlst TYPE STANDARD TABLE OF tnlst WITH HEADER LINE,
" itab_tkukt TYPE STANDARD TABLE OF tkukt WITH HEADER LINE,
*" itab_t016t TYPE STANDARD TABLE OF t016t WITH HEADER LINE,
itab_tvgrt TYPE STANDARD TABLE OF tvgrt WITH HEADER LINE.
*& SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK block
WITH FRAME TITLE text-100.
SELECT-OPTIONS: s_date FOR vbrk-fkdat OBLIGATORY,
s_vkbur FOR vbak-vkbur OBLIGATORY,
s_vtweg FOR vbrk-vtweg OBLIGATORY,
s_werks FOR vbap-werks,
s_spart FOR vbrk-spart OBLIGATORY,
s_matkl FOR mara-matkl.
PARAMETERS:
r_opt3 RADIOBUTTON GROUP grp1,
r_opt2 RADIOBUTTON GROUP grp1.
r_opt4 RADIOBUTTON GROUP grp1,
r_opt5 RADIOBUTTON GROUP grp1,
r_opt1 RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK block.
*& INITIALIZATION
INITIALIZATION.
r_opt2 = 'X'.
*& START-OF-SELECTION.
START-OF-SELECTION.
*select data from VBRP
SELECT vbeln
posnr
matnr
aubel
fkimg
vrkme
arktx
vgbel
werks
vkgrp
fklmg
volum
vkbur
vtweg_auft
FROM vbrp
INTO TABLE i_report
WHERE "erdat IN s_date
AND spart IN s_spart
vkbur IN s_vkbur
AND vtweg_auft IN s_vtweg.
**logic for Pending, Summary & Detail Report
IF
r_opt1 EQ 'X' OR
r_opt2 EQ 'X' OR
r_opt3 EQ 'X'.
SELECT vbeln
rfbsk
erdat
fkdat
fksto
netwr
fkart
knumv
mwsbk
bzirk
vtweg
spart
FROM vbrk INTO TABLE i_vbrk
FOR ALL ENTRIES IN i_report
WHERE "vbeln = i_report-vbeln
" and
fkdat IN s_date
AND fkart IN ('ZBHR', 'ZTZT', 'ZKRP', 'ZRUD', 'ZBSR',
'ZGHT', 'ZKOL', 'ZPTN', 'ZRNC', 'ZCND',
'ZDLH', 'ZGZB', 'ZGUR', 'ZHSR', 'ZJPR',
'ZLKW', 'ZBLR', 'ZCHN', 'ZCBM', 'ZHUB',
'ZHYD', 'ZKOC', 'ZAHD', 'ZIND', 'ZMUM',
*********************MODIFICATION BY CHAKRAPANI (ADDITION OF ZVIJ AND ZHWH ) 18.05.2007
'ZNGP', 'ZPNE', 'ZRPR' , 'ZEXP', 'ZDEM','ZVIJ', 'ZHWH','JEX' )
*********************MODIFICATION BY CHAKRAPANI (ADDITION OF ZVIJ AND ZHWH ) 18.05.2007
AND vtweg IN s_vtweg
AND spart IN s_spart
AND fksto NE 'X'.
IF i_vbrk[] IS NOT INITIAL.
SELECT vbeln
posnr
matnr
aubel
fkimg
vrkme
arktx
vgbel
werks
vkgrp
fklmg
volum
vkbur
vtweg_auft
FROM vbrp
INTO TABLE i_report
FOR ALL ENTRIES IN i_vbrk
WHERE vbeln = i_vbrk-vbeln "erdat IN s_date
AND spart IN s_spart
AND vkbur IN s_vkbur
AND vtweg_auft IN s_vtweg.
ENDIF.
ELSEIF r_opt4 EQ 'X' OR
r_opt5 EQ 'X'.
SELECT vbeln
rfbsk
erdat
fkdat
fksto
netwr
fkart
knumv
mwsbk
bzirk
vtweg
spart
FROM vbrk INTO CORRESPONDING FIELDS OF TABLE i_vbrk
FROM vbrk INTO TABLE i_vbrk
FOR ALL ENTRIES IN i_report
WHERE vbeln = i_report-vbeln
AND fkart EQ 'ZEXP'
AND vtweg IN s_vtweg
AND spart IN s_spart
AND fksto NE 'X'.
ENDIF.
SORT i_vbrk BY vbeln ASCENDING.
ENDIF.
change amit by my self may be removed
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SORT it_report BY aubel.
*select VBAP data
SELECT posnr vbeln matnr werks
kwmeng lgort
FROM vbap
INTO TABLE i_vbap
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-aubel.
ENDIF.
change amit by my self may be removed
*select data from VBKD
IF NOT i_vbap[] IS INITIAL.
SELECT vbeln posnr
FROM vbkd
INTO TABLE i_vbkd
FOR ALL ENTRIES IN i_vbap
WHERE vbeln = i_vbap-vbeln.
ENDIF.
SORT i_vbap BY vbeln ASCENDING.
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
DELETE ADJACENT DUPLICATES FROM it_report COMPARING matnr.
SORT it_report BY matnr.
SELECT
matnr
matkl
mtart
labor
bismt
normt
ferth
zeinr
extwg
spart
FROM mara
INTO TABLE i_mara
FOR ALL ENTRIES IN i_report
WHERE matnr = i_report-matnr
AND spart IN s_spart.
ENDIF.
IF NOT i_mara[] IS INITIAL.
SORT i_mara BY matnr.
SELECT matnr
labst
FROM mard
INTO TABLE itab_mard
FOR ALL ENTRIES IN i_mara
WHERE matnr = i_mara-matnr.
ENDIF.
ENDIF.
DATA : it_mara LIKE LINE OF i_mara OCCURS 0.
IF NOT i_mara[] IS INITIAL.
REFRESH it_mara.
it_mara[] = i_mara[].
DELETE ADJACENT DUPLICATES FROM it_mara COMPARING matkl.
SORT it_mara BY matkl.
SELECT matkl wgbez
FROM t023t
INTO TABLE i_t023t
FOR ALL ENTRIES IN it_mara
WHERE matkl = it_mara-matkl.
*T024X
REFRESH it_mara.
it_mara[] = i_mara[].
DELETE ADJACENT DUPLICATES FROM it_mara COMPARING labor.
SORT it_mara BY labor.
SELECT * FROM t024x
INTO TABLE itab_t024x
FOR ALL ENTRIES IN it_mara
WHERE labor = it_mara-labor
AND spras = sy-langu.
ENDIF.
*begin of change amit
LOOP AT i_vbap.
READ TABLE i_mara WITH KEY matnr = i_vbap-matnr.
IF sy-subrc = 0.
*material type & material group
i_vbap-mtart = i_mara-mtart.
i_vbap-matkl = i_mara-matkl.
ENDIF.
MODIFY i_vbap.
ENDLOOP.
*Material Group Description
*end of change amit
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
DELETE ADJACENT DUPLICATES FROM it_report COMPARING vgbel.
SORT it_report BY vgbel.
SELECT vbeln
ean11
volum
lgmng
FROM lips
INTO TABLE i_lips
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-vgbel.
ENDIF.
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY vgbel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING vgbel.
IF i_lips[] IS NOT INITIAL.
SELECT vbeln
wadat_ist
traid
bolnr
FROM likp
INTO TABLE i_likp
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-vgbel.
ENDIF.
SORT i_lips BY vbeln ASCENDING.
LOOP AT i_lips.
REFRESH t_line.
CLEAR w_tdname.
w_tdname = i_lips-vbeln.
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = 'ZVOW'
language = sy-langu
name = w_tdname
object = 'VBBK'
TABLES
lines = t_line
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT t_line.
CONCATENATE i_lips-waybill t_line-tdline INTO i_lips-waybill.
ENDLOOP.
IF sy-subrc EQ 0.
MODIFY i_lips.
ENDIF.
ENDLOOP.
*IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY aubel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SELECT a~vbeln
b~name1
b~kunnr
b~regio
b~land1
a~vkgrp
b~niels
b~kukla
b~brsch
a~vkbur
FROM vbak AS a
INNER JOIN kna1 AS b
ON akunnr = bkunnr
INTO TABLE i_kna1
FOR ALL ENTRIES IN i_report
WHERE vbeln = i_report-aubel.
AND land1 = 'IN'.
*endif.
DATA : it_kna1 LIKE LINE OF i_kna1 OCCURS 0.
IF NOT i_kna1[] IS INITIAL.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY regio.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING regio.
SELECT spras
land1
bland
bezei FROM t005u
INTO TABLE i_t005u
FOR ALL ENTRIES IN it_kna1
WHERE bland = it_kna1-regio
AND spras = 'EN' AND land1 = 'IN'.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY niels.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING niels.
SELECT spras niels bezei FROM tnlst
INTO TABLE i_tnlst
FOR ALL ENTRIES IN it_kna1
WHERE niels = it_kna1-niels
AND spras = sy-langu.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY kukla.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING kukla.
SELECT spras kukla vtext FROM tkukt
INTO TABLE itab_tkukt
FOR ALL ENTRIES IN it_kna1
WHERE kukla = it_kna1-kukla
AND spras = sy-langu.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY brsch.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING brsch.
SELECT spras brsch brtxt FROM t016t
INTO TABLE itab_t016t
FOR ALL ENTRIES IN it_kna1
WHERE brsch = it_kna1-brsch
AND spras = sy-langu.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY vkgrp.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING vkgrp.
SELECT spras vkgrp bezei FROM tvgrt
INTO TABLE itab_tvgrt
FOR ALL ENTRIES IN it_kna1
WHERE vkgrp = it_kna1-vkgrp
AND spras = sy-langu.
ENDIF.
SORT i_kna1 BY vbeln ASCENDING.
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY aubel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SELECT a~vbeln
a~kunnr
b~city1
FROM vbpa AS a
INNER JOIN adrc AS b
ON aadrnr = baddrnumber
INTO TABLE i_adrc
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-aubel
AND parvw = 'WE'.
SORT i_adrc BY vbeln ASCENDING.
ENDIF.
DATA : it_adrc LIKE LINE OF i_adrc OCCURS 0.
IF i_adrc[] IS NOT INITIAL.
REFRESH it_adrc.
it_adrc[] = i_adrc[].
SORT it_adrc BY kunnr.
DELETE ADJACENT DUPLICATES FROM it_adrc COMPARING kunnr.
SELECT kunnr name1
FROM kna1
INTO TABLE i_kna2
FOR ALL ENTRIES IN it_adrc
WHERE kunnr = it_adrc-kunnr.
ENDIF.
SELECT a~lifnr
a~vbeln
b~name1
FROM vbpa AS a
INNER JOIN lfa1 AS b
ON alifnr = blifnr
INTO TABLE i_lfa1
FOR ALL ENTRIES IN i_report
WHERE vbeln = i_report-vgbel
AND parvw = 'SP'.
SORT i_lfa1 BY vbeln ASCENDING.
change amit by my self may be removed
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY vbeln.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING vbeln.
SELECT exnum
exdat
rdoc
status
FROM j_1iexchdr
INTO TABLE itab_exnum
FOR ALL ENTRIES IN it_report
WHERE rdoc = it_report-vbeln AND status = 'P' OR status = 'C' .
ENDIF.
change amit by my self may be removed
change amit by my self may be removed
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY aubel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SELECT kwmeng
vbeln
lgort
FROM vbap
INTO TABLE itab_qty
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-aubel.
ENDIF.
change amit by my self may be removed
SORT itab_qty BY vbeln.
CHECK NOT i_vbrk[] IS INITIAL.
SORT i_report BY vbeln.
DATA : t_vbrk LIKE LINE OF i_vbrk OCCURS 0.
REFRESH t_vbrk.
t_vbrk[] = i_vbrk[].
SORT t_vbrk BY knumv.
DELETE ADJACENT DUPLICATES FROM t_vbrk COMPARING knumv.
SELECT ksteu
knumv
kschl
kbetr
kwert
kposn
kmein
FROM konv
INTO TABLE it_rate
FOR ALL ENTRIES IN t_vbrk
WHERE knumv = t_vbrk-knumv
AND kschl IN ('ZR00', "Basic Price
'ZR01', "Basic Price
'ZR02', "Basic Price
'ZR03', "Basic Price
'ZR04', "Basic Price
'ZR05', "Basic Price
'JEXP', "Excise
'JECS', "ED
'ZG03', "Freight
'ZG04', "Freight
'JCST', "CST
'JLST', "LST
'ZDEV', "Dev Tax
'Z001', "Discount
'Z002', "Discount
'Z003', "Discount
'Z004', "Discount
'Z005', "Discount
'Z006', "Discount
'Z007', "Discount -
Short Dump while creating Configuration (Application or Component)
Hi All,
I m facing a short dump, while creating a Component or Applcation Configuration
in the standard FPM_GAF_COMPONENT.
Short dump states the Runtine error as MESSAGE_TYPE_UNKNOWN
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_MESSAGE_MANAGER========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_MESSAGE_MANAGER========CP" -
in "IF_WD_MESSAGE_MANAGER~REPORT_T100_MESSAGE".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 16
of the (Include) program "CL_WDR_MESSAGE_MANAGER========CM00R".
12 exporting
13 textid = cx_wdr_rt_exception=>invalid_
14 endif.
15
>>>> message id msgid type msgty number msgno
17 with p1 p2 p3 p4
18 into msg.
19
20 if p1 is not initial.Hello Srikanth,
I have no issues in trying to help someone as polite as you! It is very nice to have questions answered in an intelligible manner - not unfortunately always the case.
Without being able to debug on your system it is quite difficult to say what might be causing this error - especially as you say this was working in a different system.
I'm sure you've already tried eliminating differences in your authorisations between the two systems? Are you registered as a developer in the new system?
Sorry I'm now just guessing as I've not come across the error myself - hopefully now that we have clearly documented the issue, someone else might be able to shed some light on what might cause it!
Chris -
Short dump while using BAPI_PO_CREATE1
Hi all,
I am facing this short dump while executing my program that uses BAPI_PO_CREATE1.
The error is 'Exception condition "failure" raised'.
The trigger location of runtime error is
Program : CL_HANDLE_MANAGER_MM====================CP
Include: CL_HANDLE_MANAGER_MM=====================CM005
Module name: GET
Source code:
Method GET.
If my_manager is initial.
Call method get_manager.
endif.
call method my_manager-> search EXporting im_id = im_id
Importing ex_handle = ex_handle
Exceptions failure = 01.
If sy-subrc <>0.
raise failure.
endif.
I am a beginner in ABAP. Plz help.Hi ,
I faced the similar situation once , in my case when i passed the Delivery indicator value in the Item Table as well as Itemx Table , i was facing this error .
what i suggest you is to pass it at the Item table only , not at the itemx Table.
it worked for me .
try this and reply for the same. -
Short Dump while using BAPI_PS_PRECOMMIT to set Project Definition Status
Hi All,
I am getting a short dump while using BAPI_PS_PRECOMMIT for setting the Project Definition status..
The requirement is to create a Project Definition and then set its status to REL from CRTD. For this purpose i am using the BAPI's in the following sequence :
1. BAPI_PS_INITIALIZATION
2. BAPI_PROJECT_MAINTAIN
3. BAPI_BUS2001_SET_STATUS
4. BAPI_PS_PRECOMMIT
5. BAPI_TRANSACTION_COMMIT
The Proj Def creation is happening successfully in step2. Interestingly, when I debug the program and stop at PRECOMMIT BAPI the program does not give a dump. I have also tried to give COMMIT WORK / WAIT FOR n SECONDS after BAPI_BUS2001_SET_STATUS, to give BAPI sometime for DB update but nothing seems to be a permanent solution.
Please give your views on a solution for this problem..
Thanks & Regards,
SomilCan you please check how to post code in SDN ...
I cannot read your code properly -
Short Dump while executing ALV Grid.
Hi All,
I m getting a short dump while trying to execute an ALV.
The dump exception is of type
CX_SY_DYN_CALL_ILLEGAL_TYPE class.
The message displayed is : " Call to form 'GI_FIELDCAT' is incorrect .The actual parameter in PERFORM is different data type than requested for form GI_FIELDCAT " .
The part of programe included is as follows:
FORM build_fieldcat .
PERFORM gi_fieldcat USING 'MBLNR' text-014 '1' '20'.
PERFORM gi_fieldcat USING 'ZEILE' text-005 '2' '4'.
PERFORM gi_fieldcat USING 'MATNR' text-006 '3' '18'.
PERFORM gi_fieldcat USING 'MAKTX' text-028 '4' '40'.
PERFORM gi_fieldcat USING 'MATKL' text-029 '5' '40'.
PERFORM gi_fieldcat USING 'BUDAT' text-027 '6' '10'.
PERFORM gi_fieldcat USING 'MENGE' text-026 '7' '9'.
PERFORM gi_fieldcat USING 'DMBTR' text-025 '8' '13'.
PERFORM gi_fieldcat USING 'WAERS' text-011 '9' '5'.
PERFORM gi_fieldcat USING 'RSNUM' text-012 '10' '10'.
PERFORM gi_fieldcat USING 'PSPHI' text-013 '11' '10'.
ENDFORM. " build_fieldcat
FORM gi_fieldcat USING fieldname TYPE slis_fieldcat_alv-fieldname
colmname TYPE slis_fieldcat_alv-seltext_m
colmpos TYPE slis_fieldcat_alv-col_pos
outputlen TYPE slis_fieldcat_alv-outputlen.
wa_fieldcat-fieldname = fieldname.
wa_fieldcat-seltext_m = colmname.
wa_fieldcat-col_pos = colmpos.
wa_fieldcat-outputlen = outputlen.
wa_fieldcat-
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " gi_fieldcat
Can ayone gimmi a solution for the same.Hi,
Try to change ur code like the below.
Attached: sample code
Building field catalog
PERFORM modify_catlog USING:
'GT_OUTPUT' 'AUART' text-t02 '1',
'GT_OUTPUT' 'KUNNR' text-t03 '2',
'GT_OUTPUT' 'NAME' text-t04 '3',
'GT_OUTPUT' 'KWMENG' text-t05 '4',
'GT_OUTPUT' 'VRKME' text-t06 '5',
'GT_OUTPUT' 'LFIMG' text-t07 '6',
'GT_OUTPUT' 'GEWEI' text-t08 '7',
'GT_OUTPUT' 'VOLUM' text-t09 '8',
'GT_OUTPUT' 'VOLEH' text-t10 '9',
'GT_OUTPUT' 'BRGEW' text-t11 '10',
'GT_OUTPUT' 'UOMGW' text-t12 '11',
'GT_OUTPUT' 'VARCE' text-t13 '12',
'GT_OUTPUT' 'UOMVR' text-t14 '13'.
FORM modify_catlog USING pa_tabname TYPE string
pa_field TYPE string
pa_text TYPE string
pa_pos TYPE string.
CLEAR gs_fieldcatalog.
*Modifying field catalog
gs_fieldcatalog-col_pos = pa_pos.
gs_fieldcatalog-fieldname = pa_field.
gs_fieldcatalog-tabname = pa_tabname.
gs_fieldcatalog-seltext_m = pa_text.
APPEND gs_fieldcatalog TO gt_fieldcatalog.
CLEAR gs_fieldcatalog.
l_repid = sy-repid.
To call function to display ALV output
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
it_fieldcat = gt_fieldcatalog
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e000 WITH text-t16.
ENDIF.
Reward if helpful.
Regards,
Ramya -
Short Dump while execuition of DTP.
Hi,
I got short dump while execuiting the DTP.
Error messages shows as below:
1.The database returned a value containing an error
2.An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3.Exception CX_SY_NO_HANDLER logged
Could you please help us in solving this issue.
Regards,
Suman.hi,
an error like this comes usually in 2 cases
1) not enough resources are available to carry out loads.in this case increase no of parallel processes to 2-3 in dtp setting,check the option get delta request by request(if its a delta load) and decrease packet size to 10000(from default 50000)
2)fileld to field assignment is not proper:
u need to check if there is any source field with lenth lets say 5 ans is getting assisgned to a target field length lets say 4.in this case dumps will come
please check the error message in st22 and here you can also check the termination point.please check in option Chosen variables /contents of system fileds where you can get temp values at point of termination.here you can pinpoint values at which prog is throwing dumps.
Maybe you are looking for
-
Can no longer import 2 CD's at the same time in iTunes 10.5.2, what happened?
i was able in the previous version of itunes to be able to import two CD's at the same time from two different optical drives. instead of importing automatically from the pop up window i could right click on the CD under the devices column and click
-
Changing the item data in MIRO ,MIR7,MIR4 transactions
Hi, Please help in finding out the BADI/User exit to change the line item data and passing changed data back to the main screen for MIRO,MIR7 and MIR4 transactions.
-
How to make a link to an image in flash?
Hi, I´m new in Flash CS3 and I´m trying to get some answers to my problem.. The question is that how do I create a link to an image in flash?? I know how to make a link to a text field but I really don´t know how this could get working properly.. :/
-
ill try and explain this in the least confusing way i can. I have a page on my site that i want to have a navigation system setup so a person on that page can find files in a folder on my computer and download them. right now i have it so when the pa
-
Create MTO production order immedately after running MRP
HI experts, Does a stragtey group can be used for a material to create MTO production order/purchase order after running MRP? Or how we can set a material to create MTO production/purhcase order immedately after running MRP? Now we are using stragety