Reg : Variant saving for Module Pool Programming

Hey Friends,
Plz help me in how to create variant for Module Pool Programming as in normal reports.Thanx in advance.

Hi,
You can create variants for Module pool program using the transaction SHD0. You can create Screen variants for your screens using this Tcode.
Go to SHD0 -> Give the Transaction code(ZTRAN) for which you want to create a variant -> name of some variant (ZVAR) -> create -> takes you to your transaction -> Give the values that you want to be displayed as variants -> Click on Save -> Opens a pop up to confirm the screen entries -> Check the check boxes of those fields that you have entered the data with (the column with check boxes that says W.Content) -> Exit and Save -> Save the variant -> You can see a screen variant created (ZVAR_0100)
Now Goto -> Create variant transaction -> Give your transaction variant name (ZVAR) -> Select Transaction with variant -> Takes you to SE93 transaction -> Give the transaction variant name -> save. Run with the created transaction.
Edited by: Nitwick on Jul 27, 2009 4:49 PM

Similar Messages

Send me one link for module pool programming !

Send me the link Where i can get the screen shots step by step to create a simple module pool programming !

hi,
pls Go through this link for module pool programming
http://www.allsaplinks.com/dialog_programming.html
http://sap.mis.cmich.edu/sap-abap/abap09/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://sap.mis.cmich.edu/abap-00/
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com
http://www.sapgenie.com/abap/example_code.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/dialog_programming.html
http://www.sapbrain.com/TUTORIALS/default.html
http://www.sappoint.com/abap/spmp.pdf
http://sappoint.com/abap.html
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/code/archives.asp?i=10&t=450&a=t
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/abap/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://www.sappoint.com/faq/faqdiapr.pdf
http://www.allsaplinks.com/dialog_programming.html
Reward Points if usefull
Regards
Fareedas

How to conduct training for Module Pool Programming

Hi everybody
I am going to conduct 5 days training for module pool programming.
Can you please provide me some suggestion about how to start & what r the steps?
Please provide suggestion for following
1) From where should I start
2) What should be the first step & subsequent steps
3) how should I get documentation & sample programs
thanks

Hello,
You can start the training by first explaining what is Module Pool programming, and why is it needed, how is it different from other forms of programming , like reports(SE38).
Then go on to explain how to create a MPP , i.e this you can do by giving the demo online, like:-
Goto SE80
Create a new program, and so on.
Talk about the various elements of MPP, such as the scree(which is also known as Dynpro), text elements, pushbuttons, tabstrips, etc, and how to use them in the program.
For sample programs and documentation, you can refer to help.sap.com, and search the documnetation for Module Pool Programming.
Thanks and regards,
Prerna

Online Documentation for Module Pool Programs

Hi All,
Is it possible to display online documentation for module pool programs?
When the report program is excuted,we have an icon to display online documentation.Can we have the same for module pool ?
Helpful answers wouuld be rewarded.
Regards
Prathima

Hi Friend,
Continuing with previous post here...
Create a Push Button in application toolbar, check the function code in USER-COMMAND event.
There u write code to call function module DSYS_SHOW_FOR_F1HELP..
Pass DOKCLASS = RE
        DOKLANGU = sy-langu
        DOKNAME = 'Module pool name'
        SHORT_TEXT = 'X'.
It will populate the documentation window.
Regards
Krishnendu

'Save As Variant' for Module Pool Program - FM to be called?

I have a dialog program, i want to activate the 'Save As variant' when i click on save on the selection screen of the transaction i created for the dialog program. What funtionality should be called or written for the PF-STATUS to implement the functionality.

hi Dagny,
You can't have variants for module pool. It is possible only for selection screen.
You have following alternatives :-
1. Create a report with same selection screen as you have now in module pool.
And then make a call screen to your intial module pool.
In this way you can all the advantage of variants as well as module pool.
OR
2. Create a transaction variant using transaction SHDO.
Hope it is helpful.
and do search the form , it is already answered before.
regards
venkat

Online Background job for Module pool program

Hi,
I need to process the dialog program in background. Normally for any executable report programs by default we will have that functionality. But i need the same functionality for my module pool program. User needs 2 execute buttons - one is for direct excute (foreground execute) and the other one is for back ground processing.
I tried with the 3 function modules job_open, job_submit & job_close. But i am keep on getting some issues and i am not sure how those will work because i wrote all the validations in direct exucte user command, now if user clicks on Background how that logic will be called and how it will be processed.
Can any one give your valuable suggestions.
regards
Jaya

Hi
Create a Transaction code for this Program.
Then implement the BDC Code to Process the SCreens with the Required input Values.
Schedule this BDC Session in Backgound using RSBDCSUB.
Reward if usefull

Reusing Standard Classes for Module pool Programming using Abap Objects

Hi.,
    I debugged the ME21n transaction and found a number of classes such as
         CL_BASIC_MODEL_VIEW_MM
         CL_GENERIC_MODEL_VIEW_MM
         CL_GENERIC_VALUE_MODEL_MM
         CL_MODEL_CONTAINER_MM
         CL_MODEL_CONTROL_VIEW_MM
         CL_MODEL_VIEW_MM
         CL_TABLE_MODEL_MM
         CL_TABLE_MODEL_TREE_VIEW_MM
         CL_VALUE_MODEL_MM
         CL_VALUE_MODEL_VIEW_MM
         CL_BASIC_MODEL_VIEW_MM
        CL_COMPOSITE_SCREEN_VIEW_M
        CL_CUSTOM_CONTROL_VIEW_MM
        CL_EXPAND_BUTTON_VIEW_MM
        CL_EXPAND_VIEW_MM
        CL_FOREIGN_APPLICATION_VIE
        CL_GENERIC_MODEL_VIEW_MM
        CL_GRID_VIEW_MM
        CL_MODEL_CONTROL_VIEW_MM
       CL_MODEL_VIEW_MM
       CL_SCREEN_VIEW_MM
      CL_SETUPVIEW_BUILDER_MM
        CL_SIMPLE_TREE_VIEW_MM
         CL_TABLE_MODEL_TREE_VIEW_M
         CL_TABLE_VIEW_CONTAINER_MM
         CL_TABLE_VIEW_MM
         CL_TABSTRIP_VIEW_MM
         CL_TC_BUTTON_VIEW_MM
         CL_TC_ITEM_VIEW_MM
         CL_TOGGLE_VIEW_MM
         CL_VALUE_MODEL_VIEW_MM
         CL_DEFAULT_CONTROLLER_MM
         CL_CONTROLLER_MM
         CL_ATP_CONTROLLER_MM
         CL_DRAG_DROP_CONTROLLER_MM ..
               How we can reuse these classes to build a custom module pool program which supports MVC architecture as used in enjoy SAP transactions .I am very much confused from where to start .
Guide me on this.I want to create a simple module pool program with Subscreens, Table Controls and Tabstrips ..
Regards.,
S.Sivakumar

Have you got any solution on this.
because i want to use CL_GRID_VIEW_MM->handle_on_data_changed for one of my development related to ME51N.

Total screen shots for module pool programming

Hi Abapers,
Any one could send me the screen shots for the module pool programming with multiple screens.
Thanks in advance.
Regards
Yubi

You can check the transaction ABAPDOCU for sample programs..
Check the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
Also chk this thread.
Urgent: : Requiremnt on module pool

Links/Docs for Module Pool Programing using abap objects

Hi all,
Can anyone send me links/docs related to Module Pool programing using Abap Objects.
Thanks n Regards
Maruthi Rao. A

hi maruthi rao,
check the below link
http://abapcode.blogspot.com/2007/06/object-oriented-alv-sample-program-to.html

Material for module pool programming

hi
can someone give me a link to THE BEST MATERIAL ON DIALOG PROGRAMMING please.
points will be given

hi,
refer the links:
http://sap.mis.cmich.edu/sap-abap/abap09/sld001.htm
http://abaplovers.blogspot.com/2008/03/sap-abap-module-pool-programming.html

Suggest Program for Module Pool Programming

Dear All,
Please suggest me the best example i can do in Module Pool.
i want to make best use of Module pool.
thanks
RP

u can create a ztable.
update that z-table with module pool program.
Create a table control and enter the data in that, update it through screens.
Regards,
Sujatha.

How to create a top include for module pool program

hi all..
I want to add my global declarations in one top inlcude.. There are so many other includes in my pgm. But how can i create top include explicitly. Also I have one normal report pgm attached with this module pool.

hi Cynthia ,
there are two ways of creating a top include at your situation ,
1) Insert an include <Prog name >TOP in your mpool program and cut n paste your declarations there .. check if this works ...
2)else .. create another m pool program in SE80 , while creating a pop up will ask for with TOP include ... check mark that and then proceed ..
anything of these two will work ...
Reward if helpful !!
Regards,
Ranjita

Reg alv grid using module pool programming

Dear Friends,
I have a situation where i am using alv grid in module programming where in when i click the total button in the tool bar for any numeric column, the screen goes for a run time error.
I have giving all conditions such as made the column in the field structure of lvc_field_catalog as do_sum = 'X',
still goes for a dump...can anyone throw some hints to do more or the reason behind this and also have not excluded the function code for this total pushbutton while passing to the method set_table_for_first_display
thanks...

hi,
check this up
internal tables
DATA: i_tab TYPE TABLE OF zchangereq,
w_tab TYPE zchangereq.
display field details
DATA: w_field_cat_wa TYPE lvc_s_fcat. " Field Catalog work area
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-020.
PARAMETERS: p_outs RADIOBUTTON GROUP g1,
p_comp RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
*MACROS
DEFINE add_field.
&1 = FIELDNAME &2 = HEADING &3 = Key field flag
clear w_field_cat_wa.
w_field_cat_wa-fieldname = &1.
lw_field_cat_wa-ref_table = p_ref_table.
lw_field_cat_wa-inttype = p_inttype.
lw_field_cat_wa-decimals = p_decimals.
lw_field_cat_wa-coltext = p_coltext.
lw_field_cat_wa-seltext = p_seltext.
lw_field_cat_wa-do_sum = p_do_sum.
lw_field_cat_wa-no_out = p_no_out.
lw_field_cat_wa-col_pos = p_col_pos.
lw_field_cat_wa-reptext = p_coltext.
lw_field_cat_wa-colddictxt = p_colddictxt.
w_field_cat_wa-scrtext_m = &2.
w_field_cat_wa-key = &3.
append w_field_cat_wa to i_field_cat.
END-OF-DEFINITION.
ALV specific Declarations...........................................
ALV specific Internal table declarations.............................
DATA: i_field_cat TYPE lvc_t_fcat, " Field catalogue
i_alv_sort TYPE lvc_t_sort. " Sort table
ALV variables........................................................
DATA: w_alv_layout TYPE lvc_s_layo, " ALV Layout
w_alv_save TYPE c, " ALV save
w_alv_variant TYPE disvariant. " ALV Variant
ALV Class definitions................................................
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS: handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
METHODS: handle_hotspot
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id.
ENDCLASS. " CLASS LCL_EVENT_HANDLER DEF..
ALV Class implementation............................................
In the Event of a Double Click drill down to the corresponding CHANGE REQUEST
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_double_click.
DATA: l_tab LIKE LINE OF i_tab.
CHECK e_row-rowtype(1) EQ space.
READ TABLE i_tab INDEX e_row-index INTO l_tab.
SET PARAMETER ID 'ZTY' FIELD l_tab-ztype.
SET PARAMETER ID 'ZCR' FIELD l_tab-zcref.
CALL TRANSACTION 'ZCRT' AND SKIP FIRST SCREEN.
ENDMETHOD. " HANDLE_DOUBLE_CLICK
not working yet - hotspot seems to stay in the gui!!
METHOD handle_hotspot.
DATA: l_tab LIKE LINE OF i_tab.
CHECK e_row_id-rowtype(1) EQ space.
READ TABLE i_tab INDEX e_row_id-index INTO l_tab.
SET PARAMETER ID 'ZTY' FIELD l_tab-ztype.
SET PARAMETER ID 'ZCR' FIELD l_tab-zcref.
CALL TRANSACTION 'ZCRT' AND SKIP FIRST SCREEN.
ENDMETHOD. " HANDLE_DOUBLE_CLICK
ENDCLASS. " CLASS LCL_EVENT_HANDLER IMPL...
ALV Grid Control definitions........................................
DATA:
ALV Grid Control itself
o_grid TYPE REF TO cl_gui_alv_grid,
Container to hold the ALV Grid Control
o_custom_container TYPE REF TO cl_gui_custom_container,
Event handler (defined in the class above)
o_event_handler TYPE REF TO lcl_event_handler.
INITIALIZATION.
PERFORM create_field_catalogue. " Create ALV Field Catalog
START-OF-SELECTION.
Outstanding requests
IF p_outs = 'X'.
SELECT * FROM zchangereq
INTO TABLE i_tab
WHERE zstatus < 99.
ELSE.
completed requests
SELECT * FROM zchangereq
INTO TABLE i_tab
WHERE zstatus = 99.
ENDIF.
END-OF-SELECTION.
PERFORM list_output_to_alv. " Perform ALV Output operations
FORM LIST_OUTPUT_TO_ALV *
This subroutine is used to call the screen for ALV Output. *
There are no interface parameters to be passed to this subroutine. *
FORM list_output_to_alv.
CALL SCREEN 100.
ENDFORM. " LIST_OUTPUT_TO_ALV
Module STATUS_0100 OUTPUT *
This is the PBO module which will be processed befor displaying the *
ALV Output. *
MODULE status_0100 OUTPUT.
SET PF-STATUS '0100'. " PF Status for ALV Output Screen
IF p_outs = 'X'.
SET TITLEBAR 'STD'.
ELSE.
completed requests
SET TITLEBAR 'COMP'.
ENDIF.
CREATE OBJECT: o_custom_container
EXPORTING container_name = 'SC_GRID',
o_grid
EXPORTING i_parent = o_custom_container.
PERFORM define_alv_layout. " ALV Layout options definitions
PERFORM save_alv_layout_options. " save ALV layout options
PERFORM call_alv_grid. " Call ALV Grid Control
ENDMODULE. " STATUS_0100 OUTPUT
Module USER_COMMAND_0100 INPUT *
This is the PAI module which will be processed when the user performs*
any operation from the ALV output. *
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'EXIT' OR 'BACK' OR 'CANC'.
may need to do this so display is refreshed if other report selected
CALL METHOD o_custom_container->free.
SET SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
FORM DEFINE_ALV_LAYOUT *
This subroutine is used to Define the ALV layout. *
FORM define_alv_layout .
w_alv_layout-numc_total = 'X'. " Numc total line
w_alv_layout-cwidth_opt = 'X'. " Optimal column width
w_alv_layout-detailinit = 'X'. " Show values that are initial in
" detail list.
w_alv_layout-sel_mode = 'A'. " Column selection mode
w_alv_layout-no_merging = 'X'. " No merging while sorting columns
w_alv_layout-keyhot = 'X'.
ENDFORM. " DEFINE_ALV_LAYOUT
FORM SAVE_ALV_LAYOUT_OPTIONS *
This subroutine is used to Save the ALV layout options. *
FORM save_alv_layout_options.
See the ALV grid control documentation for full list of options
w_alv_save = 'A'.
w_alv_variant-report = sy-repid.
ENDFORM. " SAVE_ALV_LAYOUT_OPTIONS
FORM CALL_ALV_GRID *
This subroutine is used to call ALV Grid control for processing. *
FORM call_alv_grid.
CALL METHOD o_grid->set_table_for_first_display
EXPORTING
is_layout = w_alv_layout
i_save = w_alv_save
is_variant = w_alv_variant
CHANGING
it_outtab = i_tab[]
it_sort = i_alv_sort
it_fieldcatalog = i_field_cat.
Link used Events and Event Handler Methods
CREATE OBJECT o_event_handler.
Set handler o_event_handler->handle_top_of_page for o_grid.
SET HANDLER o_event_handler->handle_double_click FOR o_grid.
ENDFORM. " CALL_ALV_GRID
*& Form create_field_catalogue
set up field catalogue
FORM create_field_catalogue .
Fieldname Heading Key?
*eg add_field 'ZTYPE' 'Type' 'X'.
ENDFORM. " create_field_catalogue

How can we select multiple rows in table control for module pool program?

hi guru's
i cannt able to select multiple table control rows for deletion of records please give any code to select rows?
regrards,
satheesh.

On the Table Control attributes there is a "Selectability" option where you choose one of: None, Single, or Multiple. In your code you then need to pick up which rows have the selection column set to 'X'.

Is it possible to save a variant in Module Pool program

Hi,
We have got a requirement to save a Variant for the user selections in Module Pool Program. Is it possible to save a variant in a Module Pool Program?
Please let me know how to do that if it is possible.
Thanks in Advance.

hi Dagny,
You can't have variants for module pool. It is possible only for selection screen.
You have following alternatives :-
1. Create a report with same selection screen as you have now in module pool.
And then make a call screen to your intial module pool.
In this way you can all the advantage of variants as well as module pool.
OR
2. Create a transaction variant using transaction SHDO.
Hope it is helpful.
and do search the form , it is already answered before.
regards
venkat

Reg : Variant saving for Module Pool Programming

Similar Messages

Maybe you are looking for