Regarding ASM in Oracle 11g
Hi
I would like to use ASM storage for my single instance oracle 11gR2 database. I am a little bit confused so that asking some question about Oracle 11g ASM.
1. Does Grid Infrastructure mandatory for installation Oracle 11g ASM instance?
2. Without installation Grid Infrastructure can I full fill my requirements ?
Regards
Rabi
"If you plan to use Oracle Restart or Oracle Automatic Storage Management (Oracle ASM), then you must install Oracle Grid Infrastructure before you install and create the database. " -- http://docs.oracle.com/cd/E11882_01/install.112/e47689/oraclerestart.htm#LADBI999
Similar Messages
-
Help needed regarding installation of Oracle 11G in Solaris10(VMware)
I am trying to install Oracle 11G in Solaris. Whenever I am trying to run the installer ,I gets below error messages.
# cd /export/home/oracle
# ls -ltr
total 2098204
drwxr-xr-x 3 oracle oinstall 512 Mar 29 21:23 product
drwxr-xr-x 2 oracle oinstall 512 Mar 29 23:03 Documents
drwxr-xr-x 2 oracle oinstall 512 Mar 29 23:03 Desktop
-rw------T 1 root root 1073741824 Mar 29 23:09 orcl_swap
lrwxrwxrwx 1 oracle oinstall 32 Mar 30 19:34 link to installation -> /e xport/home/oracle/installation
drwxr-xr-x 4 root root 512 Mar 30 20:30 installation
drwxr-xr-x 4 oracle oinstall 512 Mar 30 23:30 tmp
# cd installation
# ls -ltr
total 4
dr-xr-xr-x 4 root root 512 Mar 30 20:30 linux.zseries64_11gR2_data base_2of2
dr-xr-xr-x 3 root root 512 Mar 30 20:30 solaris.x64_11gR2_database _1of2_1
# cd solaris.x64_11gR2_database_1of2_1
# ls -ltr
total 2
dr-xr-xr-x 8 root root 512 Mar 30 21:09 database
# cd database
# ls -ltr
total 38
dr-xr-xr-x 12 root root 512 Mar 30 20:34 doc
dr-xr-xr-x 4 root root 512 Mar 30 20:34 install
dr-xr-xr-x 2 root root 512 Mar 30 20:34 response
dr-xr-xr-x 2 root root 512 Mar 30 20:34 rpm
dr-xr-xr-x 2 root root 512 Mar 30 20:34 sshsetup
dr-xr-xr-x 14 root root 1024 Mar 30 21:09 stage
-rwxrwxrwx 1 root root 6513 Mar 30 21:59 runInstaller
-r--r--r-- 1 root root 5400 Mar 30 21:59 welcome.html
# ./runInstaller
./runInstaller: /export/home/oracle/installation/solaris.x64_11gR2_database_1of2_1/database/install/.oui: cannot execute
It will bre great if anyone can help me with some ideas and concepts here.I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Creating Oracle 11g Database Manually on ASM on 11g R2 Grid
Hi:
Earlier added this issue alongwith Grid installation. Only Jorg replied to me but could not find a complete solution. So thought of starting a new thread.
Wanted to know if any one of you have successfully created Oracle Database Manually on ASM on Oracle 11g R2 Grid.
I have installed Oracle 11g R2 grid (grid user) and Oracle 11g R2 DB software succesfully (oracle user).
Now trying to create a database manually on ASM as Oracle user.
First I create an pfile in $ORACLE_HOME/dbs
then I started by db on nomount stage. when I create a spfile on to my ASM diskgroup I get
I have created 2 diskgroups '+DGASMSPFILE' (ASM Spfile) and '+DGDBDATA' (for database)
Grid is up and running.
From Oracle user:
Have created a sample initDBRAC.ora
Now I want to create Oracle Database Global Spfile into '+DGASMSPFILE'
export ORACLE_SID=DBRAC
$ sqlplus / as sysdba
SQL> create spfile='+DGASMSPFILE/spfileDBRAC.ora' from pfile;
ORA-17502:ksfdcre:4 failed to create file +DGASMSPFILE/spfileDBRAC.ora
ORA-12547: TNS lost contact
"Oracle user" should have privileges to access ASM diskgroup right? What is the permission set for /dev/sdc* (earlier it was root:oinstall I changed it to grid:oinstall even then no difference.
Trace output:
ASM_DISKSTRING= /dev/sdc*
***********************************************************************1st trace file
Fatal NI connect error 12547, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser)(CONNECT_DATA=(CID=(PROGRAM=oracle@skyit6)(HOST=skyit6)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 01-JUN-2011 01:27:07
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 01-JUN-2011 01:27:07
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS-12547: TNS:lost contact
ns secondary err code: 12560
nt main err code: 517
TNS-00517: Lost contact
nt secondary err code: 32
nt OS err code: 0
ERROR: Failed to connect with connect string: (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser))
Wed Jun 01 01:27:07 2011
ERROR: slave communication error with ASM; terminating process 16772
Errors in file /oraeng/app/oracle/product/diag/rdbms/dbrac/DBRAC/trace/DBRAC_ora_16772.trc:
Regards
DineshHi Sebastian:
When I installed grid software, oracle db software and created oracle db manually things worked fine.
When I restart the RAC environment I found the following issues:
1) all the resources does not come up automatically, once i issue crs_start -all all the services comes up. (most of the resources related to node1 comes up but cluster resources related to node2 does not come up) crsctl check crs shows that things are online.
2) wanted to recreate a database manually after restarting the RAC enviroment. To start of as usual tried to create a spfile in ASM disk "Create spfile='+DGDBSPFILE' from pfile'
I get ORA-17502:ksfdcre:4 failed to create file +DGDBSPFILE'
12547: TNS: lost contact
looks like permission problem.
The same command worked before restarting the RAC environment. Pls let me know if I am missing out anything.
Is it because i am unable to access ASM instance.
3) As you had mentioned tried to set the sbit by executing the following statement:
$ /opt/grid/bin/setasmgidwrap o=/opt/oracle/product/11.2.0/db/bin/oracle
should this be put into "rc" folder in linux so that it gets set everytime linux starts up. because once i restart the permission get changed.
I should execute it from grid user to change the permission of 'oracle' binary in 'oracle user' right?
Can you explain me why is this required (sbit).
Thanks.
Regards
Dinesh -
Dear Support,
Please correct my post as i am not supposed to write URGENT word there.
My apologize.
Thanks
Malik Adeel Imtiaz
Dear Support,
I need urgent help regarding License of Oracle 11g. Your quick reply will be highly appreciate.
My Client has Oracle 10g DB Server and Oracle 10g DB client installed. Now we update them on Oracle 11g DB Server.
They have purchased Oracle 11g DB Server. Please confirm that do they also need to purchase Oracle 11g Clients for there user machines.
Also plz confirm Oracle 11g DB Clients is free ware. (As per my understanding Oracle 11g DB Client comes in pack with Oracle 11g DB Server).
Please reply
Thanks
Adeel Imtiaz
Edited by: 860994 on May 25, 2011 4:46 AMFirst of all,
This is NOT Support, and this forum is not monitored by Oracle. Your use of the word 'urgent' consequently as insulting and rude, especially as the questions you ask are answered in the license you agreed to, you can read the license yourself.
Please refer to the terms of use for this forum, especially paragraph 4
http://www.oracle.com/us/legal/terms/index.html
If you would have read the license, you would have known the Client is included on the CD with the RDBMS.
There is no need to purchase anything.
Sybrand Bakker
Senior Oracle DBA -
Upgrade ASM Oracle 10.2.0.4.0 to ASM Oracle 11G R2 on Windows 2008 SP2
Please advice on procedure or where I can find information on upgrading ASM from Oracle 10G to Oracle 11G R2 (Winwdows 2008 SP2 64bit environment) for mutiple Oracle instances (not a RAC environrment).
The current scenario is as follow:
- Two oracle homes; one for ASM instance and another for the Oracle Databases (in current case only two oracle instances possiblly more at a later time). Both (ASM and Oracle databases) have the same version of Oracle 10.2.4.0.
The Oracle database home can't be upgraded due to application restricition (Vendor Application not tested on Oracle 11G) but will like to upgrade the ASM instance to Oracle 11G (Oraclle 11G R2).
Questions:
- Is is a feasable solution? Can I upgrade ASM instance to Oracle 11G R2 to take advantage of new features? Will the ASM upgrade scenario is compatible with the Oracle Database Instance running Oracle 10G? Any possible issues that I should be aware or concerns?
Is it possible to have ASM running in Oracle 11G R2 and service the need of Oracle database instance running in 10G?
Please advice or where I can obtained information on the matter. Also possibly if someone has done it on Windows 2008 SP2 (not Windows 2008R2).
Thanks in advanceThanks so I can upgrade the ASM Home instance and leave the Oracle Databases home on Oracle 10.2.0.4.
I agree with you not just 100%, actually 120%. Fortunately, the vendor is finally understanding by pressure provided by DBAs and Application Teams that they are very behind the curve. It is working and by summer we should have an oracle 11G compatible product.
The same thought went when I was told of their compatability database level.
Regards
Albert -
Installing oracle 11g with ASM
Hi ,
Thanx for priviuos supportss.
Here we are going to configure a new set up on new hardware :
clients requirements :
oracle 11g with ASM :
Number of instance = Single database
Platform = IBM AIX 6.1
Kindly provide me any guidence / steps regarding same as i havent configured this yet..user12045405 wrote:
Thank u very much for interest ...
version = 11.2.0.2
Can u plz ans my below questions :
1.When we say ASM , is it considedred as a Grid Infrastructure ASM is one component of Grid Infrastructure. You can't have ASM without it.
2.What is ORACLE RESTART , do i really need to install it...It is also part and parcel of Grid Infrastructure - at least for a stand-alone.
there is an entire forum dedicated to GI installation, located [url https://forums.oracle.com/forums/forum.jspa?forumID=62]here
>
And fwiw, if you run the GI installer, one of the options is gives is to Install Grid Infrastructure for a standalone server. Pretty painless as long as you have correctly configured your disks that will be used with ASM.
kindly revert.........Edited by: EdStevens on Feb 28, 2013 7:25 AM -
ASM option comes with Standard Edition Oracle 11g R2 Install or not?
Hello,
I just wanted to make sure before installing the Oracle 11g R2 software, whether ASM (Automatic Storage Management) is available for Standard edition or not?
Thank you for your help.
Ally.
Edited by: Ally_p on Jun 17, 2010 1:58 PMHi Ally,
based on:
http://www.oracle.com/us/products/database/product-editions-066501.html
I think it is included. See Automatic Storage Management section!
Regards,
David
OCP 9i / 10g / 11g
https://www.oratoolkit.ch/knowledge/howto/installation/otn.php -
Oracle 11g ASM installation on HP UX 11.31 Risc
Hi All,
I am planning to install Oracle 11g ASM on HP UX 11.31 Risc machine. Is it possible to configure ASM without using RAW devices. If yes what is the procedure.
Thanks,I am planning to install Oracle 11g ASM on HP UX 11.31 Risc machine. Is it possible to configure ASM without using RAW devices. If yes what is the procedure.AFAIK, it is not possible.
-
How to Create Manual Standby for a Oracle 11g RAC with ASM to Single Instan
Hi All,
I have a task to configure a Single Instance Standby Database with ASM for 2-node Primary RAC+ASM database.
Version using : 11.1.0.6 Oracle 11g --- *" STANDARD EDITION "* Please note datagaurd will not be supported in standard edition.
Primary database - 2 -Node RAC using ASM storage (All datafiles, redologs, controfile and archive logs)
Need to setup a single instance standby database manually and than using scripts to transfer the archive logs from primary server to standby server to do recovery time to time.
Please let me know if there are any configuration document(s) which can help me to set the manual standby? or need your kind help to give your valuable ideas how to go in above situation.
Thanks in advanceNiall Litchfield wrote:
El DBA wrote:
Well if the archive logs are stored in ASM on the primary nodes, you almost definitely want to be using RMAN to access them. Then to transfer between primary and standby there are many options, this is essentially the step that Data Guard takes care of - so if you (and I) are running Standard Edition, this is the part to "worry" about.
I'm not really sure what you mean by this:
As in standard edition the archive destination will be on ASMI don't think the Edition of Oracle (Standard or Enterprise) dictates where and how you store your archive logs, but it's possible I've misunderstood what you mean...SE dictates that database storage for RAC will be ASM, including archive log files. Anything else is not officially supported. I haven't tested but it may be that you can use LOG_ARCHIVE_DUPLEX_DEST to specify a local filesystem for archive log files as well.
If that doesn't work you'll have to script rman "backup as copy" jobs regularly and then transport the results of that.
Niall Litchfield
http://www.orawin.info/
By the way, it seems Robert has been pretty helpful, it's polite to give him some points dude. And since this is your thread, not mine, give him a "helpful" from me too :p
El DBA
Incidentally if you are forced down the RMAN backup as copy route then this will likely throw your current backup retention strategy somewhat, you'll need to think carefully about when an archivelog can be deleted following backup, how many times it might be backed up and so on. I do understand, and have argued for, the use of SE RAC. I also understand and have argued for and implemented manually managed standby a number of times. However by the time your primary database is a RAC instance and you need a standby for DR etc then you really have to look very seriously at whether Standard Edition is still the right investment or not. You will be spending a lot of DBA time managing and troubleshooting this, and you will find that it is less reliable than the off the shelf solution. I suspect that you are very close to the point where an EE installation becomes a worthwhile investment here.
Niall Litchfield
http://www.orawin.info/ -
Need help regarding upgrading Oracle 10g Forms to Oracle 11g Fusion Middlew
Hi All,
I am trying to create a workshop on a VM for showing the migration / upgrading of Oracle Forms 10g to Oracle 11g FMW using the Upgrade Assistant tool available in <ORACLE_HOME>/bin/ua.bat.
As per my understanding of pre-requisites:
1) I need to install Oracle SOA Suite 10g on my VM.
2) I also need to install Oracle SOA Suite 11g on my VM.
3) I need to install Oracle Forms/Reports Services 10g on my Oracle SOA Suite 10g installation.
4) I need to run Oracle Forms/reports installer on my Oracle SOA Suite 11g installation.
5) I need to run upgrade assistant tool on my VM to upgrade my form from source(Oracle SOA Suite 10g) to destination(Oracle SOA Suite 11g). Is it mandatory for this migration that I should have Oracle SOA Suite 10g and Oracle SOA Suite 11g on the same system ?
Having all these software installed on one VM would be difficult. So just wanted to check can I avoid any software to install on VM ?
If there is any alternative suggestion then please let me know.
Regards,What do you want to do with the SOA-suite? At least for Froms10G is is not necessary.
-
Oracle 11g ASM - looking for some answers
Hello,
I reviewed a bunch of stuff about Oracle 11g ASM from various sources, but still haven't figured out some answers. Perhaps someone could help me to find the missing links please.
Q1) ASMLib seems to require partitions. ASM recognizes partitions as well as disk devices. So why not using partitions in general? At least I could use ASMLib later without having to reconfigure the drives and loosing all data. Correct?
Q2) The ASMLib driver is not installed by default, and unlike other ASM components is not available from the public yum repository for OEL 5.5. After some searching I found it available for download, but why is it not more obvious. Should it not be used anymore? http://www.oracle.com/technetwork/topics/linux/downloads/rhel5-084877.html
Q3) ASM will not see drives or partitions unless the device ownership is set to Oracle. When Enterprise Linux starts, it resets all block devices to the owner of root. The solution is to create a udev rules file: e.g.:
/etc/udev/rules.d/99-oracle.rules:
KERNEL=="sda", OWNER="oracle", GROUP="dba", MODE="0660"
KERNEL=="sdb", OWNER="oracle", GROUP="dba", MODE="0660"
Before using ASMLlib, I need to configure the driver, which will ask me for the default user and group who owns the partitions (/etc/init.d/oracleasm configure)
I conclude that using ASMLib will therefore not require a udev rules file, correct?
Q4) The Oracle documentation outlines that ASMLIB is an application programming interface (API) developed by Oracle to simplify the operating system–to-database interface and to exploit the capabilities of vendors' storage arrays on Linux-based systems. What does this mean, examples? Isn't this what ASM does in general, why ASMLIB?
Q5) I installed ASM and would like to re-configure it. Apparently ASM alone does not provide an interface other than sqlplus. In order use ASM with Enterprise Manager, I need to install a database or EM 11g (?) Grid control. Correct?
Thanks,
MarkusHi,
So you got answers for 3 4 and 5
Q1) ASMLib seems to require partitions. ASM recognizes partitions as well as disk devices. So why not using partitions in general? At least I could use ASMLib later >without having to reconfigure the drives and loosing all data. Correct?Using ASMLib, you can use your understandable disk partitions names rather than creating raw devices and adding entry in /etc/raw file and changing rights on every startup, so it makes life easier. Read post of "wcoekaer" from following thread
ASMLib and Linux block devices
Q2) The ASMLib driver is not installed by default, and unlike other ASM components is not available from the public yum repository for OEL 5.5. After some >searching I found it available for download, but why is it not more obvious. Should it not be used anymore? http://www.oracle.com/technetwork/topics/linux/downloads/rhel5-084877.html
I am not sure about OEL 5, but i have seen it in OEL 4 and i can install this package during OEL 4 installation. But i believe you should be able to find this package in one of the Disks of OEL 5
Salman -
sir/mam
i am facing a problem in installing the oracle 11g.. after installing the software. when i am going on command prompt then it is asking for user name and password. after then it is showing that connected to oracle. then when i am clicking on the desktop icon get started with oracle database 11g, it is opening a web page. i am not getting what to do after that..?????
sir/mam please give me some advice.. its very urgent.
thanks a lot..Hi,
Reading Database Express Edition Getting Started Guide might help
http://docs.oracle.com/cd/E17781_01/admin.112/e18585/toc.htm
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
+ASM spfile default location of Oracle 11g RAC Linux
Is anybody now the default location of +ASM spfile at Oracle 11g RAC Linux.
ITs there if you dont have the Database installed yet ! +DATA/asm/asmparameterfile/registry.253.725983597
-
ASM Installation on Oracle 11g Clusterware (RAC) environment
Hi All,
I am trying to setup Oracle 11g Standared Edition RAC+ASM on RedHat Linux 5.0 VM ware box. As part of this RAC setup successfully completed. For this i have used raw devices and mounted using NFS.
In many of forumns i have read that ASM installtion on a cluster envioronmnet is different than non cluster environment.
I dont know how to start ASM installtion on RAC environment. Please share any documents if you have?
Thanks,
Rakeshwill the steps need to be done on two nodes of cluster or it is sufficient on first node.
"raw device" for OCR, VOTE, SPFILE_FOR ASM and ASM DISKGROUPs
before do "raw devices" you have to fdisk(make partitions) on share storages
node1:
# fdisk /dev/sdf
# ls /dev/sdf*
node2:
# ls /dev/sdf*
don't find...,so just fdisk -> l and -> w
fdisk how? http://linux.about.com/od/commands/l/blcmdl8_fdisk.htm
Example: /etc/sysconfig/rawdevices do it every nodes
#Oracle OCR File +~280M+
/dev/raw/raw1 /dev/sdf1
#Oracle Voting File +~280M+
/dev/raw/raw2 /dev/sdf2
#Oracle ASM spfile ~50M+
/dev/raw/raw3 /dev/sdf3
#Oracle ASM DISK Group1
/dev/raw/raw4 /dev/sdg1
#Oracle ASM DISK Group2
/dev/raw/raw5 /dev/sdh1
And oracle user.. can read /dev/raw/raw* You should find on every nodes
http://oraclepitstop.wordpress.com/2008/02/15/raw-devices-on-rhel-5-or-oel-5/
ls -la /dev/raw/raw*
crw-rw---- 1 root oinstall 162, 1 Jan 13 12:53 /dev/raw/raw1
crw-rw---- 1 oracle oinstall 162, 2 Jan 13 12:53 /dev/raw/raw2
crw-rw---- 1 oracle oinstall 162, 3 Jan 13 12:53 /dev/raw/raw3
crw-rw---- 1 oracle oinstall 163, 1 Jan 13 12:53 /dev/raw/raw4
crw-rw---- 1 oracle oinstall 164, 1 Jan 13 12:53 /dev/raw/raw5
do it on node1 but you have to pass phrase on every nodes Before
http://www.puddingonline.com/~dave/publications/SSH-with-Keys-HOWTO/document/html/SSH-with-Keys-HOWTO-5.html
example:
node01:
$ ssh node01 hostname
node01
$ ssh node02 hostname
node02
- Install + Setup Clusterware:
OCR = /dev/raw/raw1
VOTE = /dev/raw/raw2
- Install Oracle Database for ASM Home
spfile for ASM = /dev/raw/raw3
- after ASM started... create disk groups from /dev/raw/raw4 and /dev/raw/raw5
- Install Oracle Database for RDBMS Home
- Create Database to use ASM diskgroups
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnRHEL5UsingVMwareESXAndNFS.php
Did you followed the same procedure to set up Oracle 11g RAC+ASM on RHEL 5.0.I'd done(test 11gRAC) it on RHEL 4 + 11g + ASM(on raw device)
on production, I use ASMlib... + ASM + 10g
you can read on metalink to help idea
465001.1
357492.1
605828.1
564580.1
on http://startoracle.com/2007/09/30/so-you-want-to-play-with-oracle-11gs-rac-heres-how/
Oracle 11g’s RAC.. I think.. that can help you ;)
Good Luck
Edited by: Surachart Opun (HunterX) on Jun 26, 2009 11:22 AM
Example from IBM... Deploying Oracle RAC 11g R1 on RHEL 5 or SLES 10 with Oracle ASM on the IBM DS3400, DS4200, DS4700, and DS4800 Storage Subsystems
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP101323
Edited by: Surachart Opun (HunterX) on Jun 26, 2009 11:27 AM -
Regarding Insallation Oracle 11g
Hi Friends,
I am having Oracle 10g Enterprise edition and i am trying to install oracle application express facing some problem, so i downloaded oracle 11g express edition.
Installed 11g in different drive... while accessing independently it's working, while accessing through front developer PL-SQL Developer,Oracle forms and reports etc facing problem as tns manes could not resolve..
How can i over come this..
--kishoreHi Friends,
I am having Oracle 10g Enterprise edition and i am trying to install oracle application express facing some problem, so i downloaded oracle 11g Release 1.
Installed 11g in different drive... while accessing independently it's working, while accessing through front developer PL-SQL Developer,Oracle forms and reports etc facing problem as tns manes could not resolve..
How can i over come this..
--kishore
Maybe you are looking for
-
Find/Replacing numbers in document problem
I have a large document that I need to replace the numbers from 1-10 with letters. The problem with doing an automatic replace is that it will affect numerals like 1.5 and numbers 11 and over. Is there any way to get around this or am i doomed to go
-
Year 2009 Malaysia Public Holidays set wrongly in SAP calendar Time Mgmt
Dear Guru, I have a scenario that the Year 2009 Malaysia Public Holidays for Hari Raya Day 1 and Hari Raya Day 2 has set wrongly in SAP calendar Time Management. Seeking your advice how do I change the Public Holiday dates in the SAP calendar to ret
-
Hi Experts, For the requirements gather workshops for in a full cycle project, what does the workshops covers. Is it just the As-Process discussed or as a consultants, what is that we need to do or prepare for the workshops? Appreciate if anbody can
-
Touchpad sensitivity and misc. help!
Hello all! I am still very new (3 weeks) and having a hard time just navigating simple things that came second nature on my Dell......like.....I would like to make my touchpad more sensitive.....I used to just go to preferences or control panel but w
-
Does anyone know where I can find documentation on Oracle's vision database? Thanks in advance, Carlos Urcuyo project manager cisp [email protected]