Regarding Authorisation

Hello All,
Below I have a scenario like this in HR Module,
Some users doesnt have authorization to read infotype 0008 which has been assigend in the standard authority object.
My requirement is when the above user runs one particular report which has got a PNP ldb attached to it he should be authorized to read the inofype 0008.
how to over ride this.
Is this possible,  and please give your valuable suggestions.
Thanks,

check this .
<b>
DBPNPAUT                            19 * Check if the user has any authorizations to read the requested
                                    22 * that users having only P_PERNR authorizations will fail this
                                    24 * Users having only P_PERNR authorizations may need other authorizations
                                    26 * Workaround: we may give the user authorizations for P_ORGIN
                                    32 ** the corresponding authorization information.
                                    39 *    is_authorized TYPE boolean.                          "XYVAHRK055732
                                   119 *          CALL METHOD hrac_badi->check_min_infty_authorization
                                   125 *              is_authorized = is_authorized.
                                   126 *          IF NOT is_authorized = hrac_badi->true.
                                   129 *          ENDIF.  " NOT IS_AUTHORIZED = HRAC_BADI->TRUE.
                                   178 *    is_authorized TYPE boolean.
                                   182 *    CALL METHOD hrac_badi->check_authorization
                                   193 *        is_authorized = is_authorized.
                                   196 *    IF is_authorized = hrac_badi->true.
                                   198 *    ELSE.  " IS_AUTHORIZED = HRAC_BADI->TRUE.
                                   200 *    ENDIF.  " (ELSE) IS_AUTHORIZED = HRAC_BADI->TRUE.
                                   209 * Form for initializing the authorization BADI exit.
</b>
Regards
Prabhu

Similar Messages

  • TS1389 Trying to play purchased TV series to my Apple TV, I am requested to authorise the computer.  This has already been done and I have tried the suggestions regarding authorisation.  I can play the programs on my computer, but not the Apple TV.

    Trying to play purchased TV series to my Apple TV, I am requested to authorise the computer.  This has already been done and I have tried the suggestions regarding authorisation.  I can play the programs on my computer, but not the Apple TV.
    Any ideas?

    in remote app click on the
    lower left corner on the text
    top of the context menu click devices
    choose the appletv rather then your shared lib in the list
    if you are trying to view a movie that is located on your ipad on your tv using the appletv then
    you should use airplay mirror not the remote app

  • Regarding Authorisation for Display

    Hi All,
    1.Initially I was unable o navigate o one particular component in Loyalty Frame work and found Basis people giving authorisation based on Component Access ,So given Component name and Inbound Plug  name  and now I was able to navigate to particular page.
    But it is Displaying one error message at the top " you are not authirised to display "
    2.Second problem is <,For specific role in Search page when i enter something and click on search it is not giving any result but it is giving for other profiles.
    Please help me here about the process how to find out the authorisation object missed for that profile .

    Try login with the same user in GUI when you get error in webui, execute transactino su53. If it doesn't resolve your issue on system trace using st01 tcode and mark "Authorization check' and in general filters use the user id which you are facing problems and do trace on and repeat your testing and do trace off and check the "Analysis" you may find the missing authorization component in end of the analysis.
    Regards,
    Kumar

  • Regarding Authorisation for Document Numbering

    Dear All
    I want to give authorisation for Groups in Document Numbering series. How do i do it ?
    for example : i have three department and i have created seperate series for each department and each department will have different group;
    Dept1: series will be A1, A2, A3, A4 and this will be under group 1
    Dept2: series will be B1,B2,B3,B4 is under group 2
    Dept3: series will be C1,C2,C3,C4 is under group 3
    now i want to give authorization for this group i.e. whenever a person belonging to one dept logs in to the b1, system should show the series pertaining to group 1 only.
    i tried by giving authorization for the group , but it is not accepting.
    do let me know if any options are avialable.
    Regards
    Kashinath

    Hai!
    Log in SAP B1 as a super user.
    Go to Administrator > Sys init > Autho > General Autho
    Select a User their
    Go to Admin > Sys init > Series > Series - Group 1 > Full Autho
    Go to Admin > Sys init > Series > Series - Group 2 >No Autho
    like that..

  • Regarding authorisations

    Hi All,
    when iam viewing CATS data base iam getting warning message as' 90 records ignored for missing authorisation'
    what is this warning mean?
    Regards,
    Evani

    Hi Vani,
    Check with your Security Team (who gives authorizations) that whether you are having authorizations to view or change the CATS data or find out that role and check it in SUIM tcode.
    In SUIM check with role, you will find what are all the tcodes access you have.
    SU53 will not give the solution for this.
    I hope you will get the solution.
    Vijay

  • A question regarding authorisation policies in OIM 11g

    Hi,
    I went through the list of OOTB Authorization policies in OIM 11g, just to know what all permissions were given to the 'ALL USERS' role which will be assigned to any OIM user by default.
    Below two policies are of a bit confusion to me. It would be great if you can put some light and clarify the missing link.
    ::::::::Role Management Role Owner Policy::::::
    This has the permission to delete role, modify role and search role:
    This is applicable to all roles in the system.
    This is assigned to 'ALL USERS' role.
    So as per my understanding, any user who is a member of ALL USERS role, can delete, modify and search role.
    But I can see only search role functionality for the default user. (ie., any user who is a member of 'ALL USERS' role)
    A simple user was not able to delete any kind of role.
    Is my understanding incorrect... Where is the missing link???
    :::::::User Management All Users Policy:::::::
    Permission is view user detail.
    Applicable to All users and assigned to 'ALL USERS' role.
    So any user should be able to view any other user detail.
    But its not happening. A user was not able to view another user's detail
    Is my understanding in correct... Where is the missing link???
    Looking forward to hearing from you,
    Many thanks in advance
    Warm regards,
    818343

    Can u check if role is assignd to user.

  • Regarding link of authorisation study material or books available online

    Hi gurus,
    Can anyone have the links or sites regarding authorisations study materials or books available on net?
    Thanx in advance
    Rgd
    Maddy

    there is no "the study material for certification", so it can't be available "free of cost".

  • Authorisations in BW for different Queries and one InfoObject

    Hi,
    we have a problem regarding Authorisations in BW.
    Some of our users have different rights on different queries e.g. for the Info-Object 0PLANT. For the query ABC he should see data to more plants than for the query XYZ.
    Our idea was to build an Authorisation-Object containing 0PLANT, TCTQUERY, TCTIFAREA and TCT ICUBE and to set the authorization for 0PLANT regarding the detailled name of the query (TCTQUERY). But this doesn't work because when starting the query SAP doesn't check the name of the Query. And so the user can always see the sum of plants set in both authorisations.
    Maybe someone of you has useful hints.

    Hi Andreas,
    In your case you need to use hierarchical authorizaton object to provide data restriction on the queries. Thus everyone can have the same query and they view what ever they are supposed to. Please find the how to document called: "How To…Work With Hierarchy Authorizations" You will find detalied information and businees scenario about the topic. Please let me know if I can assist you further
    Regards

  • Delivery Completion in Sales order

    Hi Experts,
    By Activating delivery completion tick mark in sales order screen it suggest a warning message V1080:Customer wants the order to be delivered completely. I want to convert this Warning message into error . Also is it possible to give authorisation to this field only particular user can remove this tick mark.

    Hi Byju4u,
    For changing warning message into error message, take the help of an abapper to look into the function module of programme used and make your customised codings so that the error message can be changed.
    Regarding authorisation, get the relevant field and define authorisation under the menupath in customisation,
    spro > sap guide > sales and distribution > authorisation management > Define authorisation
    Regards
    R. Senthil Mareeswaran.

  • Authorizations in report

    Hi all,
    I just need clarification regarding authorisations, my requirement is something like this, i have to pass two values for actvt & the field
    authorisation object - v_vfkk_fka
    activity - 03 & 02
    field value - '001' & '002' .
    the code i have written is not working, which is mentioned below.
    authority-check object 'v_vfkk_fka'
                      id 'fkart' field '001' '002'.
                      id 'actvt' field '03' '02'.
    Can anyone suggest me where did i do the mistake?
    Thanks in Advance....

    Hi Prashanth,
    Refer to the following code:
    WF_INTERFACE_KEY = '0000000130'.
      BNAME = SY-UNAME.
      if INTERFACE_KEY <> WF_INTERFACE_KEY.
        RETURN-TYPE = 'E'.
        RETURN-MESSAGE = 'Interface key error.'.
        append RETURN.
        clear RETURN.
        exit.
      endif.
      clear INT_FIELDVALUE.
      refresh INT_FIELDVALUE.
      free INT_FIELDVALUE.
      move 'ACTVT' to INT_FIELDVALUE-FIELD.
      move '16' to INT_FIELDVALUE-VALUE.
      append INT_FIELDVALUE.
      move 'OBJNAME' to INT_FIELDVALUE-FIELD.
      move 'Z_RFC_RFQ_PO_DETAIL' to INT_FIELDVALUE-VALUE.
      append INT_FIELDVALUE.
      call function 'Z_AUTH_OBJECT_CHECK'
        exporting
          BNAME         = BNAME
          OBJECT        = 'Z:RFC:WEBM'
          INTERFACE_KEY = WF_INTERFACE_KEY
        importing
          RETURN        = WF_RETURN
          MSGLINE       = WF_MSGLINE
        tables
          FIELDVALUE    = INT_FIELDVALUE
        exceptions
          others        = 1.
    Hope this helps.
    Reward if helpful.
    Regards,
    Sipra

  • Tacacs+ 2960S Stack

    Hello All,
    We have recently bought a batch of Cisco 2960x-48LPS-L switches. They where all shipped with c2960x-universalk9-mz.150-2.EX2. We have migrated our standard switch configuration which works fine on Cisco 2960, 3750 switches onto these x series switches but have an issue with TACACS+. When we connect using SSH we get a message regarding Authorisation Failure and are unable to logon. This is exactly the same config as used on other switches. I have seen discussions about old versions of code having issues with TACACS have these been fixed in this version? I have tried upgrading one stack to EX4 but with no difference in outcome.
    Got another 20 of these switch planned for the next couple of weeks and TACACS+ is a must so any help would be very appreciated.
    Thanks
    Ian

      Maybe try and zeroize the the ssh keys and recreate them.  Also I have seen in the past where cutting and pasting  a config the tacacs server keys do not get input correctly.  Delete the tacacs server key line and "manually type the whole line with the key . 

  • Project Team System Authorization Standards

    hi
    i am new guy to security. we are in prepare preparation phase(Technical requirements design) of the implementation project.
    i want to prepare documentation for "authorisation standards for project team". and i have to define standards, policies for creating user master records for project team members
    please kindly suggest me and provide some documentaion regarding authorisation standards, roles of project team.
    thanks in advance
    Ramesh

    Hello Ramesh,
    You'll need to do more research within your project team. As Auke suggested, it is a good idea to interview the consultants and assess their needs. Once you know that maybe you can find some SAP roles that will get you on the way.
    Some things to keep in mind:
    What do you allow the consultants to do? Hopefully everything they're being paid for. Check with project management to see if they are not stretching their needs. They also know you're new to the stuff and will take advantage by asking as much as possible.
    What will you not allow them to do? This is to be decided based on risk assessment, done by management. Risks can be simple stuff like: how often do you make a backup? What are the costs in time and material to restore the system to the last sucessfull backup state? Are you using real data (with corporate and privacy risks) to test?
    If you block certain activities and this conflicts with the project progress, what then? Involve the decisionmakers in this design stage already.....

  • Warehouse number at scm

    What are the Assignment to warehouse number, who to process it durning pgi.
    thanks
    Prasanna

    Hi ,
    A ware house number is assigned to  combinations of  a Plant & Storage Location. How ever these plant and storage locatoin comibations must be unique.
    Regarding processing of PGI - its a business process decision regarding authorisations and organization structure. Generally its done by the ware house personnel.
    Regards
    Raghuramam

  • Implementation and Upgrade - Workcenter

    Hi!
    We are setting up a SM7.0 SP-15 environment. We are planning to use ' Implementation Workcenter. I am looking for any pointers in using this new feature vs. the old way of using via solar transactions.
    Thanks in advance
    Mark

    Hi Mark,
    I am yet to make a practical use of it, but very keen to. [This thread|Work Centres as of SP15 - A doubt regarding authorisations; may provide you an idea.
    Best regards,
    Srini

  • I am unable to install apps as my iTunes states my computer is already authorised, then it tells me to authorise it? Does anybody out there know how to fix this. I am sorry if there is already a thread regarding this but there is 224,613 running atm.

    I am unable to install apps as my iTunes states my computer is already authorised, then it tells me to authorise it? Does anybody out there know how to fix this. I am sorry if there is already a thread regarding this but there is 224,613 running atm.
    I have an iMac that has iTunes on it.
    My iPad is a first gen but its almost upto date, I haven't updated it for about a month.
    If anyone out there has some information I would appreciate it a lot.
    I am only doing this as iBooks isn't working
    Thanks in advance.

    Removing the SC Folder worked for me. But as an after thought and another potential problem although I do not think it is related, I had movies authorized thru my wifes Apple ID and she changed her ID a couple weeks ago. This, I think, could have had a contributing factor although not sure.
    You have to delete the SC Folder and then reboot and then go into iTunes, re-authorize if it asks, then I was able to sync the movies. Hope this helps a little.

Maybe you are looking for

  • Can you mimic the mail-merge part of Recuitment to other areas of HRMS?

    We are migrating to Oracle HR from a legacy system that allows users to run custom mail-merge MS Word docs from almost any screen that they choose. Is it possible to do this in HRMS from areas other than OTA and Recruitment? For example, when someone

  • Oracle 10g under solaris 10.

    Hi people, i have installed a Oracle 10g under a solaris 10 zone. The installation was completed sucefull. but when i will try to startup the instance ... [ @ORCL]: ./sqlplus "sys/secure as sysdba" SQL*Plus: Release 10.2.0.1.0 - Production on Thu Sep

  • Agent Error? IOException in sending Request :: Connection refused: connect

    For the past couple of days, I have been running into the "IOException in sending Request :: Connection refused: connect" error. I am running 10.2.01 on Windows 2003R2. Along with this error, the DB Control shows agent unreachable. Is there anything

  • JS Tree Browser - JSP

    I have inserted a JS Tree Browser Data Web Bean in a JSP page but it doesnot works!! This is the result: "Rowset must be self-referential and ViewLink accessor must be defined" ... What should I do??... Thanks!! Johary Pirez.

  • Preset some data

    I have a 2010 list which has some common data like product names, product codes etc. The list also has the dynamic column which has the number of items which is the only variable data. Is there a way to prefix all other data except the number of item