Regarding-Copying from sales document type

Hi Friends,
I am trying to create Good Stock return with reference of sales invoice. While entering the reference number system is giving a error message which says u201CCopying from sales document type ZEXP to RE is not Supportedu201D. How to resolve this issue?
Regards,
Shankar G

Hi Shankar,
You need to maintain the copy controls from Invoice to Sales document. Because your Invoice type is customized.
You need to copy from F2 to RE and make the changes as per yopur requirement ZEXP to RE . Then try to create the return order with reference to invoice.
I hope its clear.
Regards,
SK

Similar Messages

  • Copying from sales document type QTH to HU is not supported

    guys i was trying to create a contract based on a quotation created by me  here QTH is my quotation type and HU is my contract type the error i encountered was thiss.
    Copying from sales document type QTH to HU is not supported .

    Hi
    In VTAA maintain the copy control settings from Quotation to Contract
    I think you can copy the AV document type which is quotation for contract.
    regards

  • Copying from sales document type L2 to RK is not supported

    Dear Experts,
    Can any guide me please regarding my issue,
    My process is linked with service order,after creation of service order,I am going to DP90 Tcode with this it will generate debit memo request,and I will do the billing from vf01.
    Now I want to make some  invoice correction,
    so I have copied the standard RK invoice correction document to ZRK
    and i have assign this for my sales area in sales document header,
    now I have raised the order from va01,and I have given the invoice document number,
    its showing this error u201CCOPYING FROM SALES DOCUMENT TYPE L2 TO ZRK IS NOT SUPPORTEDu201D
    for this I think I have to maintain the copy controls,
    can any one help me out how to maintain the copy controls for invoice correction.

    Dear JP,
    As you said I have maintained the item category,I have only two item categories,one is L2N,L2W.
    I have copied the standard document  from VTAF,and I have maintained the copy controls like this,
    Copied from RK to F2 as ZRK to ZL2 header data
    Data T   052  billing doc header
    Data T  103   billing bus header data
    Data T  003   billing header partner
    Copying requirements as   021  billing header
    Tick on copy item number
    Then item category maintained as
    Item category as L2N
    Data T  153  Item from billing document
    Data T  104  billing bus item data
    Data T  004   billing item partner
    Copying requirements  as  000
    Pricing type         u201CEu201D
    2nd pricing type  u201CDu201D
    And the same for L2W,but I have not maintained for u201CG2Nu201Ditem category,but I has copied automatically?
    Then I have raised the sales order from va01,its ask the billing document number,I have  given the billing doc number and press on copy,its has open the sales order,
    Here I have two issues,
    1st its generating the two same line items,with G2N item category
    EG:if I have given 2 materials line items then its generating the 4 line items with the same material.
    2nd I am not able edit any line litem,it all are coming in non editable mode,how to make editable field,and make the changes for price and quantity.
    After saving the document again I have to do the billing from vf01?
    please suggest me,so this will be added advantage to the user.

  • What are the img setting to be fullfilled while copy the Sales document typ

    Hi What are the setting to be fullfilled while copy the sales document type and item category.
    Note:  I have already copied, but unable do the PGI(Post goods issue),  and Billing.
    Thanks
    Prasanna

    Hi
    Answer for this Question.
    we have set the copy control for sales order type and delivery and billing
    Regards
    Prasanna R

  • New document type to be copied from old document type

    Dear Sir
    i have created one document in document type draw no i want to delete that document from draw and i have to copy its all document to my new docmuent type Z09 please guide how can i do it.
    regards
    kunal

    Hi Kunal,
    normally you cannot just change the document type for a document info record. So you have to create a new document info record of type Z09 and maintain the same data for it in transaction CV01N. Since this new document info record is created you can delete the older wrong document info record which is no longer used.
    Another possibility could be to use a DMS BAPI sequence. Here you can read out the whole data with BAPI_DOCUMENT_GETDETAIL2 from the initial document info record. Then you can hand over this data to BAPI_DOCUMENT_CREATE2 and change just the document type to Z09. At the end execute BAPI_TRANSACTION_COMMIT to create the new document info record in your database tables. Afterwards you should be able to see the new document in transaction CV03N as well with the same data.
    I hope this could be useful for you.
    Best regards,
    Christoph

  • Sales docu type ZLCO Vs Billing type ZLR - Error

    Hi Experts,
    Pls help me in the following scenario : I made one sales order with order type ZLCO.(Order relevant Billing type) maintained in VOV8, when i create billing for this order i am getting the following error  Sales document type ZLCO cannot be invoiced with billing type ZLR.
    Regs.
    SR

    Hi,
    Pls check whether you have maintained the following settings:
    Did you maintain the Billing type ZLR in order related billing type in VOV8 .
    Did you maintain the billing relevance B     (Relevant for order-related billing - status acc.to order qty) in VOV7.
    Did you maintain the copy control from Sales document type ZLCO to billing type ZLR in VTFA.
    Regards
    M. Lakshmi Narasimhan

  • What are the Special Sales document types ?

    Dear SAP Gurus
    What are the Special Sales document types ?
    Regards
    ND

    ND
    Special Sales document types are :-
    1.SO-Rush Order.
    2.G2-Credit
    3.RE-Return order
    4.KN
    5.RK-Invoice Correction request
    Regards
    Vivek

  • Copying pricing procedure from sales document to another

    Hi all,
    I have a sales document type ZDSI that has a specific pricing procedure and one
    sales document type DR that doesn't have pricing procedure.
    When I create a sales order DR referencing the sales document type ZDSI ,
    the item is copied but without any pricing procedure (total sum is 0).
    On the Copying Control: Sales Document to Sales Document - I already tried to set for the item category pricing type = G,E & D.
    I need that the system will use the pricing procedure that was copied for the item ,do you know how can I change it to copy from the referenced sales document?
    TX
    Dana Siman

    Hi dana siman
    In VOV8 For the document type DR check what Document pricing procedure (Dupp) has been maintained and also check in the document type ZDSI what Document pricing procedure (Dupp) has been maintained.In both the document types DR and ZDSI  Dupp should be same  So if you have pricing procedure RVAA01 and its Dupp is A then check in the DR document type what Dupp has been maintained.If the Dupp is same then the same pricing procedure will get copied
    Regards
    Srinath

  • Problem with copy control from sales document to billing document

    Hi,
    I have a copy control from a sales document to a billing document,
    which is copying everything from the sales document, except the
    conditoin values. Any ideas on why will a copy routine won't copy the
    condition values from a source document? I don't even have a document
    pricing procedure assigned to my billing document. Any setting, that
    we can do to for the conditions to get copied from the sales document
    to the billing document...just as they are in the sales document?
    Thanks for the help in advance.
    Regards,
    Vijay

    In IMG,
    Implementation Guide for R/3 Customizing (IMG)
    -->Sales and Distribution
       -->Billing
          -->Billing Documents
             -->Maintain Copying Control For Billing Documents
                -->Copying control: Sales document to billing document
    What setting do you have for your source sales document type to target billing document type? Select the row that shows the document type you are interested in and double click on item(on the left pane). Select the item category and do display. What value do you see under the 'Pricing Type' and 'Price Source'?
    May be that is where some config setting is missing.
    Srinivas

  • Reading the description of Sales document type and Profit centre from table

    Hi
    I want to print the description of Sales document type and Profit center on output
    I have checked in table TVAK and CEPC  but i am unable to pick description against the code
    Can anyone please suggest from where can i capture the description of sales document type and profit centre
    Thanks and Regards
    Sunil Srinivasan

    Hi
    If you have the sales document number VBELN then pass this VBELN in to table VBAK and you can get the sales document type VBAK-AUART.
    Now pass the same VBELN to VBAP table here you can get the Profit Center VBAP-PRCTR
    For sales Document type description you pass the VBAK-AUART values into table TVAKT  table and get the values for TVAKT-BEZEI is you sales document type description
    For Profit center description goto table CEPCT and enter the profit center you will get the
    KTEXT
    LTEXT
    MCTXT
    regards
    Prashanth
    Edited by: Prashanth@SD on Oct 25, 2010 12:29 PM

  • Does anybody know table for copy controls from Sales document to Delivery

    Hi,
    Does anybody know table for copy controls from Sales document to Delivery. Especially for item level.
    Regards,
    Praveen

    >
    Lakshmipathi wrote:
    > Almost all members know copy control from sale order to delivery.  What exactly your problem is ??   Please post that and avoid asking questions like this !!!!!!!!!!
    >
    > thanks
    > G. Lakshmipathi
    Sorry for my post. I guess you were a wee bit quicker than me in the reposnse

  • Disable sales document type from COPA? Is it possible?

    Hello gurus
    We have a situation where we dont wish system to create Profitability Analysis segments for items belonging to the quotes that we are creating?
    Is is possible to disable PA assignments by a sales document type and or item categories?
    Many thanks
    Jai

    The best person to guide for this would be your FICO consultant.
    Anyhow, check following thread for some understanding:
    How to deactivate COPA
    Note: Check all possible result before deactivating it on your system.
    Check Following link for understanding
    [Business Area Vs. Profit Center Vs. Profitability Segment|http://sapdocs.info/sap/fico/business-area-vs-profit-center-vs-profitability-segment/]
    [Profit Center Default In Sales Order|http://www.sap-img.com/sap-sd/profit-center-default-in-sales-order.htm]
    Thanks & Regards
    JP

  • Billing block for customer for sales document type OR

    Hi
    I want to block a customer for a particular sales document type OR
    How to do it?
    Regards

    Hi Nikhil
    There is a field called "Check Partner Auth.", but it is necessary to create the order from a contract. This field is in sales document customizing VOV8.
    SAP Documentation:
    Check partner authorizations
    This check determines whether a partner is authorized to release against a contract.
    Procedure
    Here you can specify whether the check is to be performed against the partners in the contract or the partners in the customer hierarchy. If you do not want the check to be performed, leave the field blank.
    When you create a release order for a contract, the system determines whether a partner is authorized to release against the contract. The check is performed at header level. Depending on the rule you enter in this field, the system checks against one of the following:
    Partners in the contract
    If the partner has the partner function AG (sold-to party) or AA (sold-to party authorized to release) in the contract, the system accepts the partner as the sold-to party for the release order.
    Partners in the hierarchy
    If the sold-to party of the contract is at a higher level in the customer hierarchy to the partner who wants to release against the contract, the system accepts the partner as the sold-to party for the release order.
    Note
    If you create a contract with reference to another contract, the system does not run a check and it copies all the partners created in the target contract. If you do not want it to do this, use copying control in Customizing to change it.
    Regards.
    Mikel

  • Sale document type in retail

    hi experts !!!!!!!!
    for IS-Retail project
    here two company code bp01 and bp02
    bp01 is responsible only for procurement and distribution so goods transfer from one company code to other company code site bye standard sales cycle and not thr stock transfer (client reqirement )
    i treat this normanl sales cylcle OR--LF----F2
    or what is the right thing to do here???????
    BUT when sales from site of bp02 there is POS SO DTA COPY FROM POS TO SAP
    so here which sales document type should be used
    and delivery and billing too
    please guide
    thanks

    Hi Hanumant,
    Case 1. Cross Company Sale
    Since you are procuring and distributing in company 1 and sales in company 2
    And as per you said you are selling from Company 1  to company 2
    Then a PO has to be created in company 1 against which a SO - DLY - Bill (OR - LF -F2) will be done.
    2. POS Sales
    As Steven said, there's no need of sales order and delivery for POS sales.
    But you may use (OR - FL)
    For billing you have to use/copy billing document type "FP" for POS billing.
    Maintain the item category, copy control, inbound profile and other config in SPRO.
    Hope this helps.
    Regards,
    Anirban Roy

  • Issues in creating Sales Document Type

    I am creating a new Sales Document Type, but the problem is this that the "Probability"  &
    "Incompl. Proced"  fields are disabled and I am unable to enter record in this field , please help me out that how can I enter values in these fields.

    Hi shadab ali
    You will be configuring  the Incompletion procedure in SPRO->basic functions->Incompletion log procedure.
    There to your sales document type an incompletion log will be assigned and that incompletion log will be getting grayed out. So if you want to change you need to change in in Incompletion log procedure. And the probability will be getting grayed out as it is determined by the Sales document  category .That is the reason if you see for document type IN the probability will be different and if you see for document type QT probability will be different but if you see for document type OR the probability will be 100%.Generally it gets copied from the CMR also.
    Regards
    Srinath

Maybe you are looking for

  • Field explorer does not open on my terminal services profile

    Dear Sirs, For some reason I am unable to open my field explorer in any crystal report on my terminal services profile. I have checked with other profiles and the problem does not exist. The problem is specific to my profile. I can also create new re

  • Replication of BP Enhancement to ERP

    HI All, My scenario is: I have created custom fields in CRM BP (BUT000) using AET. Now i need to replicate these fields in the ERP BP (BUT000) I have enhanced BP in ERP with EEWB and added my fields there. Now i want to know what steps i need to foll

  • Errors when running my Terminal app. on 10.4 that was made on 10.5

    Hi I wrote a small game for the Terminal, and it works fine on my 10.5 mac as well as my brother's. However, when some friends try it on a couple of 10.4 macs, they get either permission errors (this seems to happen if I don't zip up the file before

  • Powerbuilder with Virtual Machine / Build Machine environment

    We are in the process of upgrading our from Powerbuilder 10.5 to Powerbuilder 12.5, and upgrading our virtual machines from Windows 2003 to Windows Server 2008. We work in a virtual machine environment, connecting through Citrix -- multiple virtual d

  • Had it with Dell, just ordered a Mac Mini

    For a number of reasons (that are so boring it will likely kill anyone who reads them so I won't post them here) I am going to throw my 6 month old top of the line Dell XPS in the pool. I just ordered a Mac Mini and I can't tell you how happy I am. H