Regarding data flow in SAP XI

Hello Friends,
In Landscape where XI connected to system(s), is there any way to find how the data flows through or how it is designed to connect other systems in SAP XI other than SLD
thanks

If you are looking for any specific landscape and trying to make out how the message flow, then i think you need
to get the Technical and functional specification documents and based on that you can get a clear picture of
how different interface are designed and which systems they are connecting.
Regards
Srinivas

Similar Messages

  • Data flow in SAP XI

    Any one there , will provide me the Data flow in SAP XI ,
    thanking you
    sridhar

    Hi sridhar
    1) Sender Adapter & Sender agreement & communication channel
    2) receiver determination
    3) interface determination
    4) message branch
    5) receiver agreement & communication channel
    6) call inbound adapter
    Regards Mario

  • Data Flow in SAP BI - Please Help

    Hello All,
    I have to prepare a Data flow in SAP BI for one of the Insurance system application.
    There are 4 flat files coming from the source. Each flat file has records on insurances details like policies and so on.
    Each flat file represents a line of business. Now the data model is newly being made. There will also be historic data for last three years for reporting and current year data is loaded in monthly basis.
    Also the error records will go in different target for reporting for each line of business.
    Please suggest a data flow which which would be made in best.
    Edited by: Syed786 on Oct 23, 2009 5:09 PM
    Edited by: Syed786 on Oct 26, 2009 11:31 AM

    Hi sridhar
    1) Sender Adapter & Sender agreement & communication channel
    2) receiver determination
    3) interface determination
    4) message branch
    5) receiver agreement & communication channel
    6) call inbound adapter
    Regards Mario

  • Data Flow from SAP Source (ECC) system to SAP BI system

    Hi All,
    I wanted to know how data will be flown from SAP Source system to SAP BI system.Data flow should include
    1) Data will be flown by using the IDOCs?
    2) What all are the interfaces involved while data is transferring?
    3) What will happen exactly, if you execute the PSA?.
    If you have any info on this, could you please post here....I
    Regards,
    K.Krishna Chaitanya.

    Hi Krishna,
    Please go through  this article :
    "http://www.trinay.com/C6747810-561C-4ED6-B85C-8F32CF901602/FinalDownload/DownloadId-C2EB7035A229BFC0BB16C09174241DC8/C6747810-561C-4ED6-B85C-8F32CF901602/SAP%20BW%20Extraction.pdf".
    Hope this answers all the mentioned questions.
    Regards,
    Sarika

  • What is the Data flow in SAP-BPC NW

    Hi All,
    Could any body explain me how the data is flowing in SAP-BPC NW.
    and what are the steps for Planning
    and what are the steps for Consolidation
    Regards,
    Setty

    Hi,
    1) Attributes describe master data like a customer. The country where the customer resides, the industry etc. describe and classify the customer. Attributes are not just the structure/metadata of the characteristics. They are also the content. The following table should visualize what i mean:
    customer-no. | name
    112 | mcpherson inc.
    113 | donalds inc.
    2) I think, you are asking about the laods from infopackage. We dont have types of infopackage. But we have one thing called Infopackage group, You can create the IPG with the selction of all infopackages in RSA1-Modelling Area to automate those loads automatically. That means it will trigger only those IP's which have been pooled up in that IGP...
    Basically there are three types of loads in Infopackage
    Full Upload: This will bring all the records in the BW irrespective of how many times you load.
    Init Delta: In this you have 2 options: a) Init with data transfer and b) Init without data transfer. Init without data transfer will just setup your delta and when you do the delta load it will bring all the records. Init with data transfer is similar to the full upload. This brings all the records for the first time and will also setup the delta process. Once the Init is done; you have to do delta for all the subsequent loads.
    Delta: This will bring only the changed / modified / added / deleted records from the source to BW.
    Hope it helps..
    Regards
    Lavanya

  • SRM Product / Material creation - Data flow to SAP MDM

    Dear SAP friends,
    I need your help with 2 issues. Thanks in advance for your collaboration.
    Our client needs to create products and make them available to purchase almost immediately.
    The scenario we had working for the last 2 years was: product creation in SRM (fields: short description / product category / measure unit), that would then be sent to SAP MDM for data enrichment, through BBP_CCM_TRANSFER_CATALOG (JOB running every 1 minute). This solution worked well for the last 2 years.
    Recently, we are having some problems with this job. We noticed that, sometimes SRM doesn´t send the new products to MDM, and we think it´s a report performance problem. The report doesn´t maintain is normal behavior when executed every 1 minute.
    SAP advice is to only run this report once a day. That would obviously require having a minimum time frame of 1 day between product creation and its availability (purchase), which isn´t acceptable in this client business model.
    Question 1: Did anyone have a client with similar requirement? What was the implemented solution?
    Because of report performance problems, we are running it (BBP_CCM_TRANSFER_CATALOG) every 5 minutes. It happens that sometimes, more than one catalog manager creates products in that time frame, and MDIS when importing the products to MDM, creates one unique workflow JOB making it impossible to assign it to both catalog managers for enrichment.
    Question 2: How can we ensure that SRM sends only one product per xml files sent to XI / PI ? Or, perhaps, ensure that XI / PI splits the xml file sent from SRM into several files with one product each.
    Thank you very much for your help in advance,
    Best Regards,
    João S. Carvalho

    Hi meka
    In product costing values flows as follows;
    In product cost calculation raw material prices are costed which comes from material master in MM01
    Product operations: i.e material BOM and master receipe or routings from PP module.From PP module operation costs comes in product costing.
    In CO module: In Tcode KP26 we maintain activity\cost center planning for activities like machine hours, set up hours, labour hours etc.Here we define plan quantity and plan prices.
    In Cost Sheet (KZS2) we maintain base cost elements & overheads and While order creation we calculate planned cost of that particular  material.and then check the variances after getting actual cost of product.
    Hope this will help you and if found useful assign points.
    Let me know if you need more information.
    Regards
    Nilesh.

  • Urgent ......regarding date format in SAP Script

    In my MAIN WINDOW  I have date fields like Date of Manifacture, created date and Expiry date.
    So, currently  I am using SET DATE MASK = 'YYYY-MM' and it is printing same format for all fields.
    But now my requirement is I want to show date for Expiry Date like 'YYYY-MM-DD'. For this I defined one temparary variable in the form like below
    DEFINE &outdate& = &mchar-vfdat&
    SET &outdate& MASK = 'YYYY-MM-DD'.
    but still it is showing format YYYY-MM...
    Plz help me how to print my desired date format...
    I am waiting for ur reply...
    Regards,
    Kumar

    Hi Kishore kumar,
    What you can do is befor printing the Expiry date set the date Mask as 'YYYY-MM-DD' and after printing your Expiry Date again set the DATE MASK to 'YYYY-MM'
    i.e.
    /: SET DATE MASK = 'YYYY-MM-DD'
       &mchar-vfdat&
    /: SET DATE MASK = 'YYYY-MM'
    Regards,
    Sunil

  • Regarding data transfer from SAP system to XI

    Hi Experts,
    I have a program in which a file of type XSTRING is sent to SAP Business Connector through a Function module. Now we want that file to be transferred to third party system through XI as interface instead of SAP BC.
    Can anybody suggest what will be the required steps ?
    Also please mention the required things to be done on ABAP part.
    Thanks in adv.,
    Akash

    Hi Gordon,
    We don't have the idoc creation part in our program so it will be better if we can use xstring file only.
    Can you suggest any function modules for data transfer to XI ?
    Thanks,
    Akash

  • Datasource and Data flow for SAP table AFVC and field AUFPL

    Hi
           During mapping of SAP fields to datasource field we have come accross AFVC table and field AUFPL .I am not able to find datasource for above mentioned table or field.Can any one please help me out ?
    Thanks
    Datta

    Hi DLK,
    You can search using SE11.
    goto SE11 in ECC system, give the table name and click on where used list.
    in the next screen select structure and press enter.
    in the result screen you will get the list
    Regards,
    Venkatesh

  • Regarding message flow in sap xi

    HI
    i want to the flow of message from outbound system to inbound system completly.
    ie  i want to know ---which components like message interfaces,rd,id,sa,ra,.............such types.i want to know  the complete flow and after which step which is to be taken place.
    also i want to know the steps involved in pipeline and when it will be called in the above sequence.
    thanks in advance.

    Hi
    The steps involved in XI message flow are below.
    1.Receiver Identification - Determines which system to participate in an exchange with the incoming message.
    2.Interface Determination - For each receiver system determines which interfaces should receive a message.
    3.Message Split - If multiple receivers are found, XI will instatiate a new message for each receiver.
    4.Message Mapping - Call the mapping program to transfer the message structure to the receiver format.
    5.Technical routing - Bind a specific  destination and protocol to the message.
    6.Call adapter. Send the transformed message to the adapter or proxy.

  • Error when i try to read a R3 dat file in a data flow

    Dear all,
    The scenario is that i read data using R3 Data flow, from SAP R/3 and put that into a R3 flat file. then i try to read that file along wth some other table from R3 in a R3 data flow. But while executing it gives an error saying cant open file
    3208     2864     R3C-150607     8/23/2009 11:16:59 AM     |Dataflow DF_DeltaNewInfoRecord_SAP
    3208     2864     R3C-150607     8/23/2009 11:16:59 AM     Execute ABAP program <D:/ABAP_PUR/NewInforecord.aba> error <    Open File Error --  D:\ABAP_PUR/InfoRecord.dat>.
    1936     2556     R3C-150607     8/23/2009 11:16:59 AM     |Dataflow DF_DeltaNewInfoRecord_SAP
    1936     2556     R3C-150607     8/23/2009 11:16:59 AM     Execute ABAP program <D:/ABAP_PUR/NewInforecord.aba> error <    Open File Error --  D:\ABAP_PUR/InfoRecord.dat>.
    Can you please help me...thank you very much in advance.
    Regards
    Smijoe
    Equate Petrochemicals

    Place ABAP_PUR/InfoRecord.dat in SAP working directory. This should help.

  • Help Required Regarding - SAP Job names using R3 data flows

    We are calling a set of SAP Jobs using R3 data flows in data services. When ever a job fails we first kill the active SAP jobs by logging into SAP and then restarting the Jobs.
    There are about 100 odd SAP jobs that we call using these Data services Jobs so we wanted to kill the jobs using a reusable code on the SAP side by passing the Job name just before every R3 flows just incase its still in active status.
    So wanted to know if there are any short cuts to retrive the set of associated SAP job names because it will be a tedious process to hardcode the SAP job names and pass them as parameters for all the 100 + SAP job names in the custom defined resuable code.
    Any help or advice on this please !!

    The program is not meeting the expectations
    and the problem is due to reflection.Do we know this for certain?
    ... my application gets the class name, field name
    etc. from an XML file so i don't know their method names
    beforehand .
    Now since every class instance corresponds to a row
    in the database and i have to call get and set
    methods of each class instance so the performance
    keeps on degrading as the number of columns and rows increase .
    Can somebody suggest some improvement regarding this
    and regarding creating multiple instances of the same object Class.forName() will be using a hash already, so there is probably not much room for improvement.
    Class.newInstance() probably does not take significantly more processing than a simple "new Fubar();".
    Umpteen reflective method invokations (one per column) for each row/instance - Are you saying these are the problem?
    You can test this easy enough.
    If you comment out the reflective method invocations and leave the rest of your code untouched,
    does your application processing speed up significantly?

  • Data/Work Flow in SAP

    Hi All,
    Plz. explain the Data/Work Flow in SAP
    Is there any difference between this if so explain,
    and kindly tell me the process.
    thank you,
    Narender

    Hii..
    Work Flow- SAP Business Workflow
    Purpose
    SAP Business Workflow can be used to define business processes that are not yet mapped in the R/3 System. These may be simple release or approval procedures, or more complex business processes such as creating a material master and the associated coordination of the departments involved. SAP Business Workflow is particularly suitable for situations in which work processes have to be run through repeatedly, or situations in which the business process requires the involvement of a large number of agents in a specific sequence.
    You can also use SAP Business Workflow to respond to errors and exceptions in other, existing business processes. You can start a workflow when predefined events occur, for example an event can be triggered if particular errors are found during an automatic check.
    SAP provides several workflows that map predefined business processes. These workflows do not require much implementation. For an overview of these SAP workflows, refer to Workflow Scenarios in Applications.
    Integration
    SAP Business Workflow uses the existing transactions and functions of the R/3 System and does not change the functions. You can combine the existing functions of the R/3 System to form new business processes with SAP Business Workflow. The workflow system takes over control of the business processes. If you are already using SAP Organizational Management, you can use the organizational structure created there to have the relevant agents carry out the individual activities. It is possible to have an activity carried out by a position. This ensures that the respective occupiers of the position can carry out the individual activities during execution of the workflow. This means that personnel changes in your organization are taken into account immediately in the execution of a workflow.
    Features
    SAP Business Workflow provides a number of tools for defining and analyzing workflows as well as for monitoring operation.
    The Workflow Builder is for displaying and making changes to workflows. You can make small extensions directly to the original workflows supplied by SAP, such as carrying out your own agent assignments or changing deadline monitoring.
    There are several Workflow Wizards to support you in the definition of workflows, with which you can create specific parts of a workflow. The Workflow Wizard Explorer gives you an overview of the existing Workflow Wizards.
    In order to make the functions of the R/3 Systems available to a workflow, you use business objects, which you can define and analyze in the Business Object Builder. These business objects are made available to the workflow in reusable tasks. The Business Wizard Explorer gives you an overview of all existing tasks.
    The end user receives information about the activities they are to carry out in their Business Workplace. This provides them with a central overview of all the activities that they are authorized to carry out. They can commence the activities from here.
    Several tools are available to the workflow system administrator, with which they can control and analyze the current workflows. The workflow system administrator is notified of problems automatically by the system.
    DATAFLOW-Data flow means flow of data from one module to another within a sap system.
    Regards,
    Aakash

  • Oracle to SAP BI with BCS u2013 Best Data flow Design.

    Hi,
      We are a SAP implementation team. We are @ Blue Print stage. My client is a RETAIL Business Gaint. Client has 50 % of Transaction data and Master data in Oracle data base. Now we are moving to BI 7.0 and also has plans to use SAP-BCS.
      We would like to map all the existing Oracle tables to BI. Provide any clue regarding the best Data flow (From Oracle 10G to BI 7.0).
    Your quick and valuable suggestion/ links are highly appreciated.
    Warm Regards,
    Bab

    Hi Ashok,
    You have mentioned that you have a Oracle 10g  system as a data inflow which perfectly sets the platform to extract the data from the Oracle  system to SAP BW system.
    This Can be done through the DB connect ,through where you could select the necessary tables and form them as a datasource in BI system,further creating the usual BI objects on top of the DS.
    Once the Data is in BI ,we could pull the BI cube or form a replica of the cube in BCS application format to use it in the BCS environment.
    Hope this helps,
    Regards,
    Rajesh.

  • How to derive month/year from date in SAP BW 3.5 data flow

    Hi
    How we can derive cal year/month and fiscal month/year from date in SAP BW 3.5 data flow (we're using transfer and update rule)..
    Thanks,
    PK

    Hi,
    if you have any date filed in source side you can just map to any time char system will automatically convert to target objects.
    please look at the screen shot for understanding. (not 3.x it is 7.x)
    Thanks,
    Phani.

Maybe you are looking for