Regarding Error Message in RunTime Workbench

Hi All,
Could you please tell me how to resolve the following error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
While doing testing in the Integration engine. This is JDBC to SOAP scenario.
Regards,
Sai

Hi Sai,
I think as per the error message, the WebService is sending back the response.
Probably you have to use JDBC adapter as Synchronous to capture the respons eof WebService.
But generally JDBC sender is used to be Async,and I think you have used it the similar way.
You need to build the Async to Sync Bridge for JDBC to SOAP communication.
Please refer below links for more details
http://help.sap.com/saphelp_nw04/helpdata/en/43/65d4dab39b0398e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/20d251c20a0732e10000000a155369/content.htm
The above links are focused for JMS adapter but you could be able to use these Adapter modules for other types of adapters also.
AF_Modules/RequestResponseBean &
AF_Modules/ResponseOnewayBean
I think the abouve modules need minumum SP 16 onwards
Either way it can be achivable with BPM also
Thanks
Swarup

Similar Messages

Unknown Erro while sending atest message through Runtime Workbench

Hi,
SInce none of my interfaces are running or generating any message, i tried sending the test message from Runtime Workbench.
And I am getting following message
Error when sending message: 403 Forbidden
What could be the reason for this message, is there any authorisation issue.
Regards
Ria
Message was edited by: ria sen

Hi ria,
Refer these threads they might be useful :
403 ERROR
HTTP 403 using the AdapterFramework
Regards
Suraj

Soap-xml messages in runtime workbench monitoring?

soap-xml messages in runtime workbench monitoring? how u montor soap xml message in runtime workbench... thanq/../

All the messages in the RWB are monitored by only one way.
Select the Message montioring and select the filter criterias. like interface name and namespace and all and u can monitor the same.
regards,
Vishal

I am trying to install the latest itunes software to my computer. After installing I keep receiving the error messages. Runtime error. Please help

Hello
I am trying to install the latest itunes software to my computer. After installing I keep receiving the error messages. Runtime error.
Please see the screen capture of the error messages.
Please help, Thank you
Ab Majid

See Troubleshooting issues with iTunes for Windows updates.
tt2

During the installation of iTune update received error message C runtime Library error 7 1114, R6034. Unable to now open my itunes. How do I fix this?

During the update of iTunes to my desktop, I received the error message: C:runtime error. R6034 Error 7 1114. What does this mean and how do I fix it?
Not that computer savvy so please walk me through the fix in simple terms. Thanks

Hey lucky scruffy,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?

I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Testing or postingmultiple messages in runtime workbench

Hi,
I want to know if there is any shortcut to automatically post multiple messages say around 130 in runtime workbench at a time without clicking send message button for each message?
let me know if any tools are available
With Regards,
Deepika.

Hi,
I am assuming you are talking about sending new messages to XI system for testing.
- You can create sender file channel in test mode and it will keep sending messages to XI system and dump all type of messages in this folder for load testing.
- You can use SOAP UI (search google for free SOAP UI), various UI tools support multiple sending for messages in one go for testing.
Regards,
Gourav

Regarding Error message in ME_PROCESS_PO_CUST badi for validation.

hi Friends,
I am Using ME_PROCESS_PO_CUST badi for validation in Purchase order (ME21N),
For that I implemented PROCESS_ITEM method which fires during each row now i add another validation in same implementation for plant should be same through out the all line item. Now following code is woking fine but when for second line item user changese plant then it shows error message as per logic which is fine but even after changing plant to correct one the error message is still coming why is it so?
following is my current validation code
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
DATA:ls_poitem TYPE mepoitem,
       ls_poitem_set TYPE mepoitem.
DATA:ls_poheader TYPE MEPOHEADER.
DATA:lm_poheader TYPE ref to IF_PURCHASE_ORDER_MM.
DATA:w_mara TYPE mara.
DATA:IT_ZMMTBL039 TYPE STANDARD TABLE OF ZMMTBL039 ,
       WA_ZMMTBL039 TYPE ZMMTBL039 .
DATA:ls_poitem1 TYPE mepoitem.
DATA:V_KUNNR1 TYPE KNA1-KUNNR.
DATA:V_KUNNR2 TYPE KNA1-KUNNR.
DATA:W_WERKS(4),
       w_werks_tmp(4),
       w_flag(1).
ls_poitem = im_item->get_data( ).
lm_poheader = im_item->GET_HEADER( ).
ls_poheader = lm_poheader->GET_DATA( ).
IF ls_poitem-werks IS NOT INITIAL.
    w_werks = ls_poitem-werks.
    import w_flag to w_flag from MEMORY ID 'FLAG'.
    if w_flag is initial.
      w_flag = 'X'.
      EXPORT w_werks_tmp FROM w_werks TO MEMORY ID 'MEMO1'.
      export w_flag from w_flag to MEMORY ID 'FLAG'.
      clear: w_flag.
    endif.
ENDIF.
IMPORT w_werks_tmp TO w_werks FROM MEMORY ID 'MEMO1'.
break swaroopb.
IF ls_poitem-werks NE w_werks.
      MESSAGE E010(zparts) with 'Different plants are not allowed in single PO.'.
ENDIF.
CLEAR: WA_ZMMTBL039,w_mara.
REFRESH:IT_ZMMTBL039[] .
SELECT *
    INTO TABLE IT_ZMMTBL039
    FROM ZMMTBL039
   WHERE bsart EQ ls_poheader-bsart.
IF sy-subrc EQ 0.
    CLEAR: WA_ZMMTBL039,w_mara.
    SELECT SINGLE *
      INTO w_mara
      FROM mara
     WHERE matnr EQ ls_poitem-MATNR.
    IF SY-SUBRC EQ 0.
      READ TABLE IT_ZMMTBL039 INTO WA_ZMMTBL039 WITH KEY bsart = ls_poheader-bsart
                                                          mtart = w_mara-mtart
                                                          spart = w_mara-spart.
      IF SY-SUBRC NE 0.
        MESSAGE E009(zparts) WITH ls_poitem-MATNR w_mara-spart ls_poheader-bsart .
      ENDIF.
    ENDIF.
ENDIF.
end method

Hello Swarup
Since you want to compare all items together (having the same plant) I would suggest to implement this logic either in method CHECK or POST of the interface.
However, if you want to make your checks within the PROCESS_ITEM method then you should change your logic.
It does not make sense to work with the ABAP memory within a BAdI implementing class because the class itself is your "memory".
I would use the following logic to implement your validation:
lo_poheader = im_item->get_header( ). " retrieve header instance
lt_items = lo_poheader->get_items( ).   " retrieve all items
ls_detail_x = im_item->get_detail( ). " details of currently processed item
LOOP AT lt_items INTO ls_item.
    ls_detail = ls_item-item->get_detail( ).
    IF ( ls_detail-werks NE ls_detail_x-werks ). " validation failed
    " do something...
   ENDIF.
ENDLOOP.
However, I would prefer to do this kind of validation in CHECK or POST method.
Regards,
Uwe

Regarding Error Message for the purchase order

Hello SRM Experts,
The Status of the purchase order is Archived and PO is not transferred to the backened system. I ran the transaction bbp_pd_po_transfer_exec in P36 and check the error message in T-Code RZ20, i get the following error in RZ20 for the PO as:
1. Error reading the export data for EXEC of purchase order
2. and in P36 system, when i press F5, popup message appears - Error while reading PO in backened system. Inform System administrator.
I want to know, why this problem appears and how to resolve this issue ?
Thanks in Advance,
Regards,
B.Satyanarayan Reddy

Hello,
I checked in the bbp_pd and there also i got the popup message as Error while reading PO in backened system. Inform System Administrator.
I also checked with the backened team, everything seems to be fine there.
The thing is that PO is not transferred to the backened system since 13.02.2008 to till date and it stuck up in the EB system.
Kindly let me know, why this problem occurs and what should i do to resolve the issue.
Thanks in advance,
Regards,
B.Satyanarayan Reddy

Query regarding Error Messages

Dear All,
            Anyone please tell me how to display 'Error Messages in PCUI'.
I tried using " Message MESAGEID type MESSAGETYPE number MESSAGENUMBER " but it did not work.
Please provide some pointers on the above.
Regards,
Vijay

You can use the the function module 'CRM_MESSAGE_COLLECT' to add a message to the application log. These are then displayed in the pc ui.
For example if you are in an application like opportunities which is working on a one order object you can use something like the following to display a message :
message w123(mymessageclass) into lv_dummy.
call function 'CRM_MESSAGE_COLLECT'
        exporting
          iv_caller_name = gc_object_name-orderadm_h
          iv_ref_object = iv_header_guid.
Regards, Paul
Don't forget to award points if this helps

Regarding Error Message while releasing Process Order

Dear friends,
                          While releasing process order i m getting following error message.
" Storage location in PUB(loc1) is not same as storage location (loc2)''.
how to remove this error and release the order.
Thanks & regards,
Sandip Sonar

Hi Sandip,
The error message LP 099 'Stor. location in PUB X is not the same as prod.stor. location Y' is issued when the system finds inconsistancy in your customizing of the couple storage location - Production supply area for your components in your process order.
The logic of the storage location determination is the following ...
The issuing storage location is determined in three steps:
1. First, the issue storage location of the material to be issued   (MARC-LGPRO) is transferred to the material master from the MRP    data if it is filled.
2. The system overwrites this value with the issue storage location from the bill of material (RC29P-LGORT, STPO-LGORT) if it is     filled.
3. If the operation to which the component is assigned in production order contains a work center with supply area, the storage    location is transferred from this supply area (PVBE-LGORT).     However, this transfer is only carried out if storage location data (MARD) is maintained for this storage location for the    material.
The logic of the supply area determination:
Priority of supply area determination for WM staging is as follows :
1. Supply Area of Work Center               (highest priority)   If no supply area defined look to
2. Supply Area in item of Bill of material (second priority)   If no supply area defined look to
3. Material Master View MRP2                (third priority)         If no supply area defined -> Error message LP 099
I hope this helps in sorting the issue.
Regards,
Mauro

Regarding error message in AXIS --Solution Urgently Required

I tried to install axis and when I run the server and enter
http://localhost:8080/axis/index.html
I get the following exception and the desired result page http://localhost:8080/axis/happyaxis does not open .
Plz help -----
The exceptions are :
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Can't find bundle for base name i18n, locale en_US
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:207)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:240)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:187)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:198)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:144)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:209)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:138)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2459)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:132)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:118)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:116)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:126)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
     at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)
root cause
java.util.MissingResourceException: Can't find bundle for base name i18n, locale en_US
     at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:837)
     at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:727)
     at java.util.ResourceBundle.getBundle(ResourceBundle.java:577)
     at org.apache.jsp.index_jsp.getRB(index_jsp.java:72)
     at org.apache.jsp.index_jsp.getMessage(index_jsp.java:168)
     at org.apache.jsp.index_jsp.getMessage(index_jsp.java:106)
     at org.apache.jsp.index_jsp.getLocaleChoice(index_jsp.java:82)
     at org.apache.jsp.index_jsp._jspService(index_jsp.java:296)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:92)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:162)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:240)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:187)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:198)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:144)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:209)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:138)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2459)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:132)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:118)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:116)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:126)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
     at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)

Yes I am using default error messages generated by adf framework . for ex. required="true"
for changing locale my code is:
public void setLocaleEnUS() {
    // change the locale
    Locale newLocale = new Locale("en", "US");
    FacesContext fctx=FacesContext.getCurrentInstance();
    fctx.getViewRoot().setLocale(newLocale);
    setPreferredLocale(FacesContext.getCurrentInstance().getViewRoot().getLocale());
public void setLocaleZhHK() {
    // change the locale
    Locale newLocale = new Locale("zh", "TW");
    FacesContext fctx=FacesContext.getCurrentInstance();
    fctx.getViewRoot().setLocale(newLocale);
    setPreferredLocale(FacesContext.getCurrentInstance().getViewRoot().getLocale());
}

Regarding error message BTE_01

Hi Sap Experts
Please help me for following error. I never seen before
one of my user is trying to post GR using t-code MB1C and getting following error message
BTE_01: Account 21000027 must be posted as group account 21000000 with trading partner.
Message no. /SIE/SF_FI_CL_01106
How can i slove it.
thank you

If you are doing it like this.
message id 00 type 'E' number 001 with 'This is the error'.
then you will get the behavior that you are seeing.
If you do it like this.... then it will be what you want.
message e001(00) with 'This is the error'.
Regards,
Rich Heilman

Regarding Error Message Deletion

Hi All,
We have lots of Fault Messages at R/3(application Error Messages) in our present client. SO when we delete this client and create a new client, will these application errors will alos be deleted or will these errors be persistent. ours is WAS 6.20.
Thanks and Regards,
Sundar

Hi,
YOu can backup table SNAP and try to restore it in new client if possible.
THanks
Amit lal

Regarding error message

hi,
When I created a simlple XL Reporter and clicked on save, then later after closing it i try to open the same file it is showing this error message:
An error occured while trying to open (filename) . type mismatch.
How to rectify this. It was not like this before.
thanks in advance
regs priya

Hi Priya,
Did you use any special characters in your file? Sometimes using special charaters result in file corruption in XL-Reporter.
Regards,
Hamsa

Regarding Error Message in RunTime Workbench

Similar Messages

Maybe you are looking for