Regarding Error Message while releasing Process Order

Dear friends,
                          While releasing process order i m getting following error message.
" Storage location in PUB(loc1) is not same as storage location (loc2)''.
how to remove this error and release the order.
Thanks & regards,
Sandip Sonar

Hi Sandip,
The error message LP 099 'Stor. location in PUB X is not the same as prod.stor. location Y' is issued when the system finds  inconsistancy in your customizing of the couple storage location - Production supply area for your components in your process order.                                                                               
The logic of the storage location determination is the following ...
The issuing storage location is determined in three steps:                                                                               
1. First, the issue storage location of the material to be issued   (MARC-LGPRO) is transferred to the material master from the  MRP    data if it is filled.                                                 
2. The system overwrites this value with the issue storage location from the bill of material (RC29P-LGORT, STPO-LGORT) if it is     filled.                                                               
3. If the operation to which the component is assigned in production  order contains a work center with supply area, the storage    location is transferred from this supply area (PVBE-LGORT).     However, this transfer is only carried out if storage location  data (MARD) is maintained for this storage location for the    material.                                                                               
The logic of the supply area determination:                              
Priority of supply area determination for WM staging is as follows :     
1. Supply Area of Work Center               (highest priority)   If no supply area defined look to                                     
2. Supply Area in item of Bill of material  (second priority)   If no supply area defined look to                                     
3. Material Master View MRP2                (third priority)         If no supply area defined -> Error message LP 099                                                                               
I hope this helps in sorting the issue.  
Regards,
Mauro

Similar Messages

  • Error message while viewing Purchase order summary

    Hi all,
    we are in 11.5.10.2 , we are getting error message while viewing purchase order "Currency formatting cannot be performed without a currency code".
    is it beacuse of currency not popluated in Purchase order?
    Verified metalink note - 960504.1
    Thanks
    Kiran

    Hi Kiran,
    Verified metalink and other areas but could not get any appropriate solution.
    I tried to reproduce the issue in various available environments...but no luck!
    My guess would be the datafix/BUG that you have referred in the MOS note 960504.1
    Please check with your DBA for this patch in test instance.
    Thanks
    -Arif.

  • Error message while creating production order with KMAT material strategy25

    Hi PP Gurus I am running variant configuration cycle...Strategy 25, Custermer Req KEK (KMAT Matrl)
    Sales order & MRP Picked the components correctly as per the dependencies
    written. So Planned order generated against sale order.
    When I tried to convert planned order to Production order...I am getting the
    below error message..
    Error Message:
    You cannot make an assignment to make-to-order stock Message no. CO684
    Diagnosis The component cannot be allocated to an individual stock because
    make-to-order production and engineer-to-order production cannot be executed
    with this order.
    A possible cause is that you are trying to create an order with reference to a
    sales-order/project, where an account assignment to a sales order/project is not
    allowed in the settlement profile that is assigned to the chosen order type.
    This is inconsistant.
    System response The following responses are possible:
    Order processing is cancelled.
    The system resets the special stock indicator back to the original value.
    Procedure Choose another order type.
    I used order type with SD1 as settelement profile.
    OVZG: default 046, settlement profile = SD1
    OPJH: Settlement profile = SD1
    Plz through some light on this if u have worked on Variant Configuration/MTO
    settlements.
    Question:
    1) Is creation of production order with KMAT material supported by SAP?
    2) If yes, why the above error occurs?
    Waiting for Ur reply
    With Best Regards

    Dear R.Brahmankar,
    I have check on the note, but it is not relevant to ecc6. The current system default setting is :
    Standrad setting for reqt class 046
    Special Stock E
    Acct Assgt Cat. M
    Valuation M
    Settlmt Profile SD1
    However if I change the Acct Assgt Cat. from M to E. It resolve the problem. I would like to know is this the right solution?
    Config in Acct Assgt M
    Consumption Posting = E
    Config in Acct Assgt E
    Consumption Posting = '  '
    In F1 key of Consumption Posting field it shown following:
    To flag the sales order item as cost- and revenue-carrying, enter an "E" (settlement via sales order).
    If you do not wish to flag the sales order item as cost- and revenue-carrying, do not enter anything.
    Dependencies
    If you are working with nonvaluated sales order stock, always flag the sales order item as cost- and revenue-carrying.
    If you are working with valuated sales order stock:
      In the case of complex make-to-order production, flag the sales order item as cost- and revenue-carrying
      In the case of sales-order-related mass production, do not flag the sales order item as cost- and revenue-carrying
    Should we change to E?
    Regards,
    Ong

  • Deleated Valuation Type --Need Error Message while creating Purchase Order

    Hi,
    In our scenario , i need a message should flash , if enduser by mistake select the deleated valuation type while creating Purchase Order.
    In current configuration , it's not there.
    Await your expert opinion.
    Regards
    Shyam Kogta

    I investigated this recently in our company and gave this answer:
    A deletion flag does not restrict anything. It is just an indicator to tell SAP that you want this record to be deleted with the next archiving run.
    The archiving run then checks if a deletion is possible or not.
    So you can set such deletion flags long time in advance, even at a moment where you still have inventory.
    To block materials from beeing used in business transactions, usually the material and sales status are used. But these statuses can only be set at overall, plant and sales organisation level.  
    In some transactions SAP issues warning messages if a material has a deletion flag. This messages could be customized to be an error and prevent any business. However, this type of restriction is not designed for our machine, as we use the material and sales status.
    Anyhow, there is no message for valuation types that have a deletion flag in procurement area.
    There is one for goods receipts (but only for a certain industry solution that is not used by us)
    There is one for deliveries ( VL 211 ).
    The valuation types are defaulted from customizing to the transaction e.g. purchase order. Or from info record to the PO. So a standard purchase order gets valuation type  ABC , while an internal order (production) gets the DEF.  Usually there should not be a need to change this valuation type manually.
    So the only solution is to archive the material master at valuation type level.
    But I guess, you already have POs with that wrong valuation type, which means you have to archive the POs first. It you have already batches with wrong valuation type, then thy have to be archived as well before a material can be archived.
    And finally if you had stock in current year, then you can archive your material in year after next year, as SAP archives only materials that have no stock in current and previous year.

  • Regarding Error Message for the purchase order

    Hello SRM Experts,
    The Status of the purchase order is Archived and PO is not transferred to the backened system.  I ran the transaction bbp_pd_po_transfer_exec in P36 and check the error message in T-Code RZ20, i get the following error in RZ20 for the PO as:
    1.  Error reading the export data for EXEC of purchase order
    2.   and in P36 system, when i press F5, popup message appears - Error while reading PO in backened system. Inform System administrator.
    I want to know, why this problem appears and how to resolve this issue ?
    Thanks in Advance,
    Regards,
    B.Satyanarayan Reddy

    Hello,
    I checked in the bbp_pd and there also i got the popup message as Error while reading PO in backened system. Inform System Administrator.
    I also checked with the backened team, everything seems to be fine there.
    The thing is that PO is not transferred to the backened system since 13.02.2008 to till date and it stuck up in the EB system.
    Kindly let me know, why this problem occurs and what should i do to resolve the issue.
    Thanks in advance,
    Regards,
    B.Satyanarayan Reddy

  • Error message while printing sales order

    The following message was displayed while trying to print a sales order from a particular computer.  Logging in on another computer with the same credentials worked fine.  any thoughts?
    Error in file Temp (bea4fc21-346f-4d31-93d6-8260b04be0a4)-(B002A516-3EB2-47FF-BAE7-3941126D5257).rpt:
    Error in formula Record Selection:
    ‘(OCTG.GroupNum) = (?Pm=OQUT.GroupNum)’
    This field name is not known
    Details: errorKind

    Hi,
    Similar error found with different layout. Check SAP note,
    1830583 - Error message pops up when printing or previewing
    marketing documents with items managed by batches via CR layouts
    Thanks & Regards,
    Nagarajan

  • USER IS GETTING ERROR MESSAGE WHILE DOING PM ORDER COLLECTIVE CONFIRMATION

    Dear,
    i have query from my client that user is getting error message " no status object is available for cre o/o/o while doing pm order confirmation. My client is using sap MRS . I Recommend the client to run program ZKBEDREP in se38 and still they are facing the same error.Can any body help me in solving this.

    Hi,
    Please see if this thread helps
    System status not avilable for one of the component - Conf. can't be done
    Regards,

  • Error message while releasing to accounting

    hi guys
    I created sales order, delivery and pgi and invoice and after that when i release to accounting this following error message coming.
    Error Message
    Error in account determination: table T030K key INT EXD
    Message no. FF709
    Diagnosis
    In the chart of accounts to be posted to, no accounts are defined for the tax code you used.
    Procedure
    Contact your system administrator.
    Define the accounts to which a tax posting is to be made with the tax code entered in Customizing for taxes on sales/purchases.
    To do this, choose Maintain entries (F5).

    Hello,
    You need to check the account determination VKOA.
    Cehc for the appropriate access.
    Cehck for the combination of based on your selection and checrt of accounts (INT) and account key EXD and maintain G/L account.
    +V + KOFI + Chart of account + Sales org + Mat Acct asst Group+ Cust Acct Asst gr + Account key + G/L Account+.
    Prase

  • ERROR message while posting SHIPMENT order

    Hi all,
    i have developed one program which can create a shipment order using BAPI_SHIPMENT_CREATE.After uploading, i have passed all the data to this FM.
    in my return parameter, i am getting only error message number & type of message but message  is blank.so it is very difficult to know what is the actual error.
    my error is like below
    message type -warning
    message no.-000
    message- (it is blank)
    i am getting 3 error message numbers. all are 000.so how could i solve this error.plz suggest.
    Regards
    pabitra

    Hi vasanth,
    Thanks for ur help. but i am getting only message no & type of message.message ID is also blank.i tried to find this message by debugging but can not succeed.
    type of message--warning
    message no--000
    so, how to find this message.plz suggest.
    Regards
    pabitra

  • Number range does not exist error message while releasing billing document

    Hi,
    We are trying to release a billing document to Accounting through VF02. But the system throws an error message that "For object RF_BELEG 1000, number range interval  does not exist FBN1".  Note : System does not specify which number range is missing...
    There are existing number range intervals for the company code which looks fine. Any advise where this number ranges are missing.
    Regards,
    Sakthy

    Hi,
    I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
    I hope this will make sense.
    Panneer

  • Error message while creating transfer order

    Hi Experts,
    My objective is to create a transfer order from a transfer requirement programatically.
    I am trying to create a transfer order using FM L_TO_CREATE_TR programatically. Prior to this FM, I am calling FM L_TR_CREATE to create a transfer requirement. I am passing this transfer requirement to FM  L_TO_CREATE_TR to create a transfer order.
    But on execution of L_TO_CREATE_TR , I am getting an error message: THIS SCREEN IS ONLY ALLOWED FOR MANUAL TRANSFER ORDERS as a status message in the program.
    Please tell how to solve this.
    Thanks,
    Sangeeta.

    Hi,
    Check whether following link is helpful
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/lt04-from-lb01-1239928
    Regards,
    Dhana

  • What is t-code or path see the error message while creating Purchase order

    Hi,
    I am creating PO and I have not maintained Info Record.While cretaing PO it is throwing warning message.Now I want to convert this to error message.How to do this.
    Regards
    Raghavendra Pai

    Hi,
    You can alter the message at SPRO->Materials management->Purchasing->Environment data->Define attributes of system message.
    Here in the system message, go to  message number 341, then change category from W to E.
    Regards

  • Price error message while creating production order- Urgent

    In past i was getting warning message of 'No price could be determined for material/batch and Plant" message no CK 465 at the time of saving the production order after creation but now it has stopped even though there is no price in material amster.
    I changed the configuration to Error message (TC: OPR4_PPCO) and it works but why not for warning message?
    Thanks

    Please confirm where i should check for Activity price?
    But then why we are able to get error message.
    Reexplain:
    Creating a production order which do not have standard cost in material master.
    While saving, getting a error message'No price could be determined.......'
    Now changing the message to Warning through configuration using TC: OPR4_PPCO
    Now again creating the production order and saving
    Expectation to have same message as warning but not getting anything.
    Thanks
    Edited by: vineet garg on May 1, 2008 12:14 AM

  • Error message while confirming production order.

    Hi Gurus,
    I would like to know if it is possible to get an error message when we try to confirm a production order if there is not a cost for each component.
    Please provide details if any.
    Thanks for your understanding.
    Naveen.A

    Hi,
    You can have setting for error message for incorrect costs in confirmation as below :
    Go to OPK4 ( Parameters for order confirmation) select plant & order type--> General individual entry ( tab)-> Error handling/logs
    Maintain tick in check box for Termination for Incorrect ActCosts.
    This will fulfill your requirement.
    Revert in case any doubt.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Apr 6, 2009 7:17 AM

  • Deletion marked material should give error message while creating proc ord

    Hello,
    i had marked the material for deletion through T-code MM06 & saved.
    Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
    But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

    Yes Brahman is Right,
    Check the followig..
    Go to OMCQ and change the message category  to E- Error message instead of W- Waring message in Message no M7 127, but
    not  M7 121.
    and check it,
    Regards,
    Pavan idlur.

Maybe you are looking for