Regarding Material on CRM WinClinet(Configuration)
Hi All,
Kindly provide helpful links or documents on CRM WinClient Configuration.
Alternatively you can mail them to [email protected]
Thanks in Advance.
Best Regards,
Kalyan
Hi Kalyan,
Refer to the link below:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0003b5b0-0b01-0010-c0b4-cb3178973441
Best Regards,
Pratik Patel
<b>Reward with Points!</b>
Similar Messages
-
Take back the exploded material Items from variant configuration
Hi All,
Can any one of you please tell me how to get back the exploded material Items from variant configuration? I was looking for a function module which takes me to CU50 and once user finishes the configuration process. I would like to take back all the exploded Items to my application.
Thank you in advance...
Regards,
SantoshHi,
Create SPK at plant 1000 with below settings,
Plant =1000
Spy type= 70
Proc type= E
Special proc type= E
Activate " withdrawl .alter.plat" check box
Issuing plant = 2000
Assign the Same SPK for component in plant 1000 at MRP view not for Header material.
And Run the MRP for Header material at plant 1000 and check ths requirement would have creatd for Component at plant 2000 .
I hope this will solve your problem.
Pradeep -
IDOC Process And regarding material
Hi,
I want learn about IDOC In ABAP . So please send me the process of IDOC and the regarding material.Check out the following links:
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
http://www.erpgenie.com/sapedi/idoc_abap.htm#Updating%20IDoc%20data%20in%20segments
http://help.sap.com/saphelp_47x200/helpdata/en/78/21750b51ce11d189570000e829fbbd/frameset.htm
Please do assign points if useful
Regards
Aravind -
ALE Process And regarding material
Hi,
I want learn about ALE's In ABAP . So pleasesend me the process of ALE and the regarding material.Hello Nagaraju,
The following links will give you complete idea about ALE,
<a href="http://help.sap.com/saphelp_46c/helpdata/en/c9/d97749ae0311d1a5120060087832f8/frameset.htm">ALE in Business Process</a>
<a href="http://help.sap.com/saphelp_46c/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm">What is ALE and how it works?</a>
Hope this helps.
Regards
Arif Mansuri -
Entire List of CRM Middleware configuration Tables needed.
Hi All, Can any one give me the entire list of all the CRM Middleware configuration Tables.
Thanks in advanceCRM Tables:
SMOFPARSFA--Middleware Parameter
SMW3FDBDOC -
BDoc Type Specific Flow
SMW3FDCUST--Customer-Specific Flow
SMW3FDSTD--Flow: Standard Configuration
R/3 Tables:
CRMRFCPAR --n Definitions for RFC Connecti
CRMPAROLTP -- CRM OLTP Parameters
CRMFILTAB -- Filter Conditions for Download -
Dear SAP Gurus,
could anybody provide me configuration material belongs to CRM. i am new to CRM.
Thank you
krishnaHi Chow,
Here is some useful information regards,
Muralidhar Prasad Chatna[WF|http://help.sap.com/saphelp_46c/helpdata/en/04/926f8546f311d189470000e829fbbd/frameset.htm]
Edited by: Muralidhar Prasad Chatna on Feb 15, 2008 3:22 PM -
Middleware: extended Material to CRM Product, EEWB needed?
Hi all,
If Material in ECC contains custom fields extended by EEWB to the MARA table, and these information are needed in CRM during replication, do I need to use EEWB to extend in CRM as well? (if yes, which table to be extended for product)
Or creating new attributes to the attribute set and assign it to CRM Product's set type will do?
Kindly advise.
cheers,
ginnieHi Ginnie,
You can create a new attributes to the attribute set and assign it to CRM Product's set type. But if you want to have the information in these Zfields in ECC to pass into CRM product master fields then you need to perform the below steps.
Configuration Tables TBE24 and TPS34 in ECC must be maintained for triggering the CRM Middleware download of data from ECC to CRM. In Table TPS34 the Process CRM0_200 contains the entry for CRM Middleware download of data.
1. Activate Customer Product by maintaining table TBE24 using transaction SM30
2. Maintain the Custom product e.g. ZPROD
3. Add the function module that the OPEN_FI function module can find for a Business Transaction Event (BTE) as an alternative to a standard function module by maintaining table TPS34 using transaction SM30
4. Create Function module for mapping in ECC. For e.g. Function Module ZSEND_PROD_TO_CRM handles mapping the custom fields to be transferred to the CRM system.
5. After this you should implement the source code to do the BAPIMTCS mapping to send the data to CRM.
6. Finally, you will need to implement a BADI PRODUCT_CUSTOMER2 in CRM, method MAP_R3_TO_CRM_MATERIAL which will map all of the custom fields from ECC into the Product Master in CRM.
Hope this helps!!!
Regards,
Chandrakant -
CRM Serviceordermanagment - Configuration
Hello,
we are using SAP CRM 2007 and SAP ECC 6.0.
My question is if anybody has already set up the serviceorder in CRM with integration to R/3 logistics execution, Controlling and billing? Could anybody provide a configuration guide? We haven´t set it up yet but we plan to do this in the next weeks.
Thank you
Best regards
ManfredHi,
Search 'Service Order Management' in SCN.
Edited by: Neenu Jose on Apr 24, 2009 7:42 AM
Edited by: Neenu Jose on Apr 24, 2009 7:49 AM -
Hi friends........
I have requirement to create Material through workflow.......
menas we need to pass different views to different person..in his business workplace....
Thanks in Advance.......
Regards,
CharanHi twinkle..........
I did same requiment object.......i will brief u....
1) first create Delagate business object of BUS1001006 with method MATERIAL_MAINTAIN_DAILOGUE function........Using this function module u should create Method for that object.........
Create parameters As T.CODe and status view.....
2)Create Ztable with fields which are need to mandetary for diaplaying particular screen........
3)now u configure u r workflow with this delagate business object and method which was create by your self.......
4)While binding you should pass T.code and status value which view you need.......
IF u doubts , please feel free to send mail........
If useful plz Rewards.......
Thanks In advance,
Regards,
Bhaksar Rao Javvaji -
Automate the set regarding option in CRM 2013 in Outlook?
Is there a way to configure the Outlook add-in for CRM 2013 to automatically set regarding on incoming emails, to the parent account, from contacts who are already in CRM? Customer is asking for automated regarding, not just tracking.
Thank you!
JuneDid you ever find a solution to this issue? I have seen this in a development environment as well.
-
hi,
how can calculate the material taxes
in which tables we can find the s material taxes .
and how can we retrieve the taxes based on material.
plz givee the tables.
regard s
spandanahi ,
U need to consult a SD consultant for configuring the tax and all so after configuring, the system will pick based on the pricing condition available and within the order level u can find the value from that u can reach out to a solution.
i.e passing the condition type to KONV and pick all the details regarding ur order and pass the condition rec no to KONP and then get the amt.
Try this hope this will help u
Regards,
Venkat -
Exits / BTE on material modification - CRM Replication
Hi all.
Our R/3 system is linked with a CRM one.
When material are modified, data are replicated by a business transaction event :
00001250 BC-MID CRD_MATERIAL_COLLECT_DATA.
We want to add custom code to extend modification of material (when material is sent) data but we want it to be replicated too...
1) We try to put our modifications in a FM called in update task in user exit ZXMG0U02 => It failed
2) We try to add a second, specific one BTE 1250. It failed because this second BTE is triggered after those standard that makes replication
Do you have another idea ?
It is possible to modify the order of BTE executions ?
Thanks a lot in advance
J.CHello Johan,
You need to check txn:OMSL in ERP and you need to make sure that settings are in sync with CRM customizing path settings.
SPRO>IMG>Cross-Applicaiton Component>SAP Product>Basic Settings-->Define O/P Format..
Especially you need to check for the lexicographical flag.
If this flag is set, then 0123 is different from 123.
Hope this helps!
Best Regards,
Shanthala Kudva. -
Hi,
I would like to download the Material from ECC to CRM. I understand that ECC's product can be assigned to different plant. In this case, how middleware can take care of this?
For example:
Plant ABC has material 124
Plant DEF also has material 124.
Question 1: iIn this case, middleware will only download the basic data for that material?
Question 2: if ECC material has extended fields which does not exist in CRM. Settype & Attributes for those extended fields have to be created in CRM and assign to the category. What will be the next step? As what I understand, BADI from CRM will be called and FM in ECC as well. But I do not have clear picture on this.
Any input is welcome!
cheers,
ginnieHello Ginnie,
To answer your first question,
In order to download the plant data of a material, you need to add MARC and MARC_KEY under 'Tables/Structures within Object'
tab of txn:R3AC1 , for object MATERIAL. This would make sure that plant data of material gets downloaded to CRM.
To answer your second question,
If you have extended fields in ECC then you need to map them to BAPI structures in User Exit so that these data would flow to CRM.
In CRM, you need to have settype/attributes and assign that settype to category.And then you need to implement the BADI
PRODUCT_CUSTOMER2 ,method MAP_R3_TO_CRM_MATERIAL, which would take care of mapping the ECC extended fields to CRM fields( which were defined as attributes/settype).
Attribute is a way to define datatypes.Settype is a means to group related attributes.If you want these attributes of a particaular settype to be available in a material , then you need to assign that settype to category to which your material belongs to.
Now to map the ECC fields to CRM fileds you need to BADI.
Hope the scenario is clear to you.
Best Regards,
Shanthala Kudva. -
Error while downloading material to CRM-Specify the relevant unit of Length
Hi Gurus,
I am getting the below 2 errors and one information message while downloading the material from R3.
Please help me in resolving the issue.
Thanks in advance for your help.
Error message:
1. Specify the relevant unit of length
2.Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
Information Messages:
1.Conversion factors of base units of measure set to 1
2.Net weight of product HIKARO1 is larger than gross weight
Thanks and Regards,
Ananda Reddy DukkaHi
Please check in ECC material master, the length unit is correclty maintianed.
Then please check in one of the failed BDoc to see whether data segment COMM_PR_UNIT has the correct data.
If the data is corrupt there, there might be the error.
The reason is that xml format was not used in this load. To correct this, please change the entry for consumer CRM in R/3 table CRMRFCPAR parameter send_xml = 'M'. Afterwards start a new initial load of materia.
Best regards,
Maggie -
Regarding : Material document data and PO data do not match (Plant)
Hi Gurus,
Please go through this BAPI program.
While uploading it is giving an error ' Material document data and PO data do not match (Plant) '.
Please help regarding this issue.For all Other moment types it is working fine except this 351 moment type.
dATA: i_excel TYPE truxs_t_text_data. "work table for excel upload
DATA: BEGIN OF it_itab OCCURS 100,
docdate(10),
postdate(10),
mvt_type(3), "Movement Type
plant(4), "Plant
lgort(4),
pur_doc(10), "Purchase Document No
po_item(3), "Purchase Document Item No
material(18), "Material Number
delnote(16),
erfmg(13),
uom(3),
lfmng(13), "Quantity
batch(10) TYPE c,
vfdat TYPE vfdat,
END OF it_itab.
DATA: it_goodsmvt_head TYPE TABLE OF bapi2017_gm_head_01 INITIAL SIZE 100,
it_goodsmvt_code TYPE TABLE OF bapi2017_gm_code INITIAL SIZE 100,
it_goodsmvt_item TYPE TABLE OF bapi2017_gm_item_create INITIAL SIZE 100.
DATA: wa_goodsmvt_head LIKE LINE OF it_goodsmvt_head,
wa_goodsmvt_code LIKE LINE OF it_goodsmvt_code,
wa_goodsmvt_item LIKE LINE OF it_goodsmvt_item.
DATA: w_mat_doc TYPE bapi2017_gm_head_ret-mat_doc,
w_year TYPE bapi2017_gm_head_ret-doc_year.
DATA: BEGIN OF it_errmsg_goodsmvt OCCURS 10.
INCLUDE STRUCTURE bapiret2.
DATA: END OF it_errmsg_goodsmvt.
DATA : obj_type LIKE bapiache09-obj_type,
obj_key LIKE bapiache09-obj_key,
obj_sys LIKE bapiache09-obj_sys.
DATA: v_date1 TYPE sy-datum.
DATA: v_date2 TYPE sy-datum.
DATA: w_lines TYPE i.
DATA: errflag.
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-100.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK bk1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
Start-of-selection processing
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = i_excel
i_filename = p_file
TABLES
i_tab_converted_data = it_itab[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_itab.
REFRESH it_goodsmvt_head.
REFRESH it_goodsmvt_item.
CONCATENATE it_itab-docdate6(4) it_itab-docdate3(2) it_itab-docdate+0(2) INTO v_date1.
CONCATENATE it_itab-postdate6(4) it_itab-postdate3(2) it_itab-postdate+0(2) INTO v_date2.
wa_goodsmvt_head-pstng_date = v_date2.
wa_goodsmvt_head-doc_date = v_date1.
wa_goodsmvt_head-ref_doc_no = it_itab-delnote.
wa_goodsmvt_head-pr_uname = sy-uname.
APPEND wa_goodsmvt_head TO it_goodsmvt_head.
Maintain it_goodsmvt_code
wa_goodsmvt_code-gm_code = '04'.
Maintain it_goodsmvt_item
*LOOP AT it_itab.
IF wa_goodsmvt_item-po_number IS INITIAL.
wa_goodsmvt_item-po_number = it_itab-pur_doc.
wa_goodsmvt_item-move_type = it_itab-mvt_type.
wa_goodsmvt_item-MOVE_PLANT = it_itab-plant.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = it_itab-material
IMPORTING
output = it_itab-material.
wa_goodsmvt_item-material = it_itab-material.
wa_goodsmvt_item-stge_loc = it_itab-lgort.
wa_goodsmvt_item-po_item = it_itab-po_item.
wa_goodsmvt_item-entry_qnt = it_itab-erfmg.
wa_goodsmvt_item-ENTRY_UOM_ISO = it_itab-uom.
wa_goodsmvt_item-po_pr_qnt = it_itab-lfmng.
wa_goodsmvt_item-batch = it_itab-batch.
wa_goodsmvt_item-expirydate = it_itab-vfdat.
wa_goodsmvt_item-NO_MORE_GR = 'X'.
wa_goodsmvt_item-mvt_ind = 'B'.
APPEND wa_goodsmvt_item TO it_goodsmvt_item.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = wa_goodsmvt_head
goodsmvt_code = wa_goodsmvt_code
IMPORTING
materialdocument = w_mat_doc
TABLES
goodsmvt_item = it_goodsmvt_item
return = it_errmsg_goodsmvt.
Process of commit work
IF it_goodsmvt_head[] IS NOT INITIAL.
DESCRIBE TABLE it_goodsmvt_head LINES w_lines.
ENDIF.
IF it_goodsmvt_item[] IS NOT INITIAL.
DESCRIBE TABLE it_goodsmvt_item LINES w_lines.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
IMPORTING
RETURN =
CLEAR errflag.
READ TABLE it_errmsg_goodsmvt INDEX 1.
IF it_errmsg_goodsmvt-type EQ 'E'.
WRITE:/'Error in function', it_errmsg_goodsmvt-message.
errflag = 'X'.
ELSE.
WRITE:/ it_errmsg_goodsmvt-message.
ENDIF.
IF errflag IS INITIAL.
COMMIT WORK AND WAIT.
IF sy-subrc NE 0.
WRITE:/ 'Error in updating'.
EXIT.
ELSE.
WRITE:/ 'Material Document created successfully and the Document Number for the Material',
wa_goodsmvt_item-material,'is:', w_mat_doc, w_year.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.Hey,
Just wanted to post that in my case this was the error of MVT_IND field in item table. When I made it from 'B' to blank then it worked.
Mine is solved....
Thanks
Maybe you are looking for
-
Adding IR c5045 document scanner to Mt. Lion?
Currently trying to scan to a document scanner via LAN in a k-12 environment. I do have print capabilities but the scanner does not show up. My Macbook is not enrolled with Active Directory. Rather, I am talking to the Printer / Scanner by the IP add
-
HT201209 How can i Switch iTunes Stores so i can redeem cards in another currency.
How can i Switch iTunes Stores so i can redeem cards in another currency. Tranks for the help
-
Change the language of Crystal Reports XI
Post Author: damden CA Forum: General When I start Crystal Reports XI the program is in the language Dutch.I'm living in The Netherlands, but my Windows XP is the English version.I want to change the language of Crystal Reports, but how do I do that.
-
How to install smslib.rxtx,commapi and jdk 5 on Ubuntu
I need help for smslib with comm and rxtx packages on Ubuntu I tried But it is not working. I need step By step installation for jdk,rxtx,comm. Please help me. note I tried the following steps: install jdk to my machine /usr/lib/jvm/java-1.5.0-sun/ u
-
Does Muse support multiple renditions of the same site?
I have built a desktop website, but would also like to build a mobile version of the same site. Can Muse support a desktop and mobile edition of the same website? So for example, if the user is viewing the site on an iPhone, they see a mobile-optimis