Regarding Oracle SOA suite patch

Hi All,
From the following URL I find that :-
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
SOA suite patch set 10.1.3.4 has been released.
However not sure whether this patch set can be applied on top of 10.1.3.1 version and that too on standalone Oracle BPEL 10.1.3.1. So will it upgrade 10.1.3.1 directly to 10.1.3.4?
Again if I am using the metalink for the 10.1.3.3 patch against patch no:-6906880, I am finding that the product name is only Oracle BPEL and not soa suite patch. So will this patch upgrade all soa suite components of 10.1.3.1 to 10.1.3.3?
Again for installing Oracle SOA suite on third party servers separate installers are available from:-
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
so will only this installer be enough to install soa suite on third party servers or again according to the Installation guide we need to install soa suite 10.1.3.1 version also?
Please advice me which one to use to upgrade to the correct stable version from 10.1.3.1?
Thanks.

6906880 is for the entire SOA Suite. This specific version is 10.1.3.3.1 MLR 8
They are now up to MLR 12, patch 7167518. If you read the readme for these, you'll see that they patch ESB as well as BPEL.
These patches are used for either the "Advanced Install" of the complete suite or will work with a standalone installation of BPEL or ESB.
From other notes I've seen, you should be up to at least 10.1.3.3.1 MLR 9.
Supposedly 10.1.3.4 is only up to the MLR 7 level so keep that in mind.

Similar Messages

  • Problem in installing Oracle Soa suite 10.3.4 patch..plzz help

    hii alll..
    Ive downloaded oracle soa suite 10.3.1.0 and then installled 10.3.4 patch on it..now when i try to deploy a Bpel prcoess iam not able
    to find the default domain..when i login to Bpel console it says no default domain available ...where as if i install only soa suite 10.3.1.0 ...then iam able to deploy the bpel process to the default domain.
    iam using jdev 10.3.4
    some one plzzz help..
    Edited by: ADFexplorer on Apr 4, 2009 12:49 PM
    Edited by: ADFexplorer on Apr 4, 2009 12:50 PM

    in the upgrade set, check the disk1/install/soa_scheme_upgrade directory.
    Under that art scripts to upgrade the BPEL and ESB schemas from earlier versions to 10.1.3.4. Execute those with the correct credentials for each schema.

  • ORACLE SOA Suite 10.1.3.1 인스톨후 10.1.3.3 patch 중 로컬포트 통신 오류가 납니다.

    oracle soa suite 10.1.3.1 에 port를 7777로 변경 하여 install 하였습니다.
    잘 startup 되고 잘 shutdown 이 되었구요,
    그 다음에 10.1.3.3 patch를 install 하는 중에 에러가 났습니다.
    Configuration Assistant "OWSM Configuration Assistant"을(를) 성공함
    ================================================================================================================
    Configuration Assistant "OPMN Shutdown Configuration Assistant"에서 생성된 출력:
    opmnctl: opmn is not running
    Configuration Assistant "OPMN Shutdown Configuration Assistant"을(를) 실패함
    ================================================================================================================
    Configuration Assistant "OPMN Shutdown Configuration Assistant"에서 생성된 출력(시도 2):
    opmnctl: opmn is not running
    Configuration Assistant "OPMN Shutdown Configuration Assistant"을(를) 실패함
    ================================================================================================================
    Configuration Assistant "OPMN Shutdown Configuration Assistant"에서 생성된 출력(시도 3):
    OPMN 서버의 로컬 포트에 통신 오류가 발생했습니다.
    OPMN 로그 파일을 확인하십시오.
    왜 그럴까요?
    em console도 안 뜨고 아무것도 안 뜹니다.
    물론 startall & stopall을 해도 같은 로컬 포트 통신 에러가 납니다.

    10.1.3.3.0 패치는 10.1.3.1.0인스턴스가 살아 있는 상태에서 적용하는 패치입니다.
    아래의 패치 step을 확인하시기 바랍니다.
    7. SOA 10.1.3.3.0 패치 적용
    a. 10.1.3.1.0 신규 설치 후 곧바로 패치를 하는 경우에는 다음을 수행하고, 그렇지 않은 경우에는 doc 폴더의 readme.html 파일에 명시된 patch set requirements를 참조하여 사전 준비 작업을 마친다.
    b. setup.exe를 실행한다.
    c. OC4J instance가 모두 살아있는지 확인하라는 메시지 창이 뜨면 아래의 명령으로 상태를 확인한다.
    $ORACLE_HOME\opmn\bin\opmnctl status
    d. 패치할 Oracle Home을 선택한다.(예:C:\Oracle\SOA1013)
    e. oc4jadmin의 암호를 입력한다(예:welcome1)
    f. 10.1.3.3.0패치가 성공적으로 완료되면 설치 프로그램을 종료하고 다음을 수행한다.
    g.ORACLE_HOME(SOA_SUITE)\bpel\system\database\scripts\upgrade_10131_10133_orac
    le.sql을 orabpel schema로 접속하여 실행한다.
    예) C:\Oracle\XE\app\oracle\product\10.2.0\server\BIN>sqlplus orabpel/orabpel
    SQL*Plus: Release 10.2.0.1.0 - Production on 월 8월 27 03:53:07 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    다음에 접속됨:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL>
    @C:\Oracle\soa10131\bpel\system\database\scripts\upgrade_10131_10133_oracle
    .sql
    h. instance를 모두 stop시킨다. (“Stop SOA Suite” shorcut실행 혹은 opmnctl stopall명령 수행)
    i. PHP를 enable시킨다.
    ORACLE_HOME\Apache\Apache\conf\httpd.conf의 내용 중에서 PHP4.0의 내용을 remark처리하고, 아래와 같이 PHP 5.0정보를 추가한 후 저장한다.
    #LoadModule php4_module modules/ApacheModulePHP4.dll
    LoadModule php5_module modules/php5apache.dll
    #AddModule mod_php4.c
    AddModule mod_php5.c
    AddType application/x-httpd-php .php .phtml
    AddType application/x-httpd-php .php .php5
    AddType application/x-httpd-php-source .phps
    j. 시스템 환경 변수에 PHPRC환경 변수를 추가한다.
    set PHPRC = $ORACLE_HOME(SOA Suite Home)\Apache\Apache\conf\php5.ini

  • Query regarding integrating sun MQ with Oracle SOA suite 11g

    Hi,
    I am new to SOA suite 11g.I have a requirement of connecting to Sun MQ 4.4 queue from Oracle SOA suite 11g.Right now, I have found a work around using java embedding by connecting to the queue from java code directly.Can I use the JMS adapter for this purpose? If yes what are the options of doing that.I saw there is an option of third party queue in the JMS adapter configuration wizard but could not get it to work.Any help is appreciated.
    Thanks in advance

    I think we can exchange only data types, i dont see any data type which can hold the object types.
    If you find anything better let us know.
    Constructing string xml and converting to xml is best option i can think of.
    Thanks,
    Vijay

  • Does OEM 12c supports for performing administration tasks on Oracle SOA Suite 10.1.3.5 environment ??

    Hello Everyone,
    I would like to start a discussion on the OEM 12c see if anyone has used for SOA Suite 10g. We are currently running on Oracle SOA Suite 10.1.3.5 we want to make use of OEM 12c for monitoring and perform administration activities. I have gone through some Oracle documents for OEM 12c,I found it's supported up to 10.1.3.4.However I am not so sure so I just wanted to clarify on this.
    Can we install the client in  Oracle Application Server/SOA OC4J  container to perform any administration task,purging,patching,monitor interfaces etc.
    I look forward to your valuable input and feedback on the discussion.
    Best Regards,

    Hi,
    The zip p6511843_101330_Generic.zip contains a README.txt which explains the steps to be followed to apply this patch.
    In the README.txt
    Refer to Section2 point No.1.
    Get the latest Opatch from metalink for bug 2617419.[this zip will contain a Opatch Directory].Extract this zip into your Oracle SOA home.[ex: C:/product/101.3.1/OracleAS_1]
    Also make sure that the Opatch directory in set in the path.
    Since we are running this Opatch on a Basic SOA installtion , you don't have to execute the changeNamesWindows.pl script[make sure that you have installed Basic version of SOA and not the Advanced].
    This patch will not work on Advanced Install.
    You can directly excute
    opatch apply.
    Follow the remaining steps mentioned in README.txt.
    Thanks
    Hot-Plug Team

  • Oracle SOA suite 11.1.1.7 on windows 8 OS, But, during installation i got a problem "Check OS Certification".

    I want to install Oracle SOA suite 11.1.1.7 on windows 8 OS, My personal HP Pavilion g6 laptop. But, during installation i got a problem "Check OS Certification". What is this certification. Please Help Me.
    Regards,
    Satish.

    Pl identify exact version of Windows 8. Have you verified that your OS is supported/certified by consulting the spreadsheet at Oracle Fusion Middleware Supported System Configurations

  • Error while deploying BPEL into Oracle SOA Suite

    Hi All,
    I am facing an issue while deploying my bpel project into Oracle SOA Suite. Please find the following error log
    BUILD FAILED
    D:\jdevstudio10135\jdev\mywork\FirstApplication\WelcomeProjct\build.xml:78: A problem occured while connecting to server "localhost" using port "8888": bpel_WelcomeProjct_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
    Error while loading process.
    The process domain encountered the following errors while loading the process "WelcomeProjct" (revision "1.0"): null.
    If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
    at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
    at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
    at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
    at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
    at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
    at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
    at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
    at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
    at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
    at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
    at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Total time: 2 seconds
    I am using JDevelpoer 10.1.3.5 and SOA Suite 10g. Please help me to figure it out.
    Thanks

    Make sure you use the similar version of soa suite and JDev 10135. If you are using JDev 10.1.3.5, your soa suite version should be 10.1.3.5. I was just wondering if you were ever able to deploy any other process successfully from the similar JDev and on similar SOA Suite ? If not you need to revisit your soa suite installation again.
    Also check the log files on the server to see if any errors are recorded.

  • Error Installing Oracle SOA Suite 10.1.3.1

    Hi Gurus,
    I was in the process of installing Oracle SOA suite 10.1.3.1 on Windows 2003, the installer seemed to take a lot of time at the 92% point, a closer examination that was the point at which the opmnctl was starting the services. After that, the installer proceeds to conclude the setup successfully but the opmn log indicates an error as shown below
    ==================================================================================================
    09/03/09 18:26:51 [ons-internal] ONS server initiated
    09/03/09 18:26:51 [pm-internal] Create pm state directory: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
    09/03/09 18:26:51 [pm-internal] PM state file does not exist: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states\.opmndat
    09/03/09 18:26:51 [pm-internal] OPMN server ready. Request handling enabled.
    09/03/09 18:26:56 [pm-requests] Request 2 Started. Command: /start
    09/03/09 18:26:56 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1600851961:0)
    09/03/09 18:26:56 [pm-process] Starting Process: default_group~home~default_group~1 (1600851962:0)
    09/03/09 18:26:59 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1600851961:1548)
    09/03/09 18:36:57 [pm-requests] Request 2 Completed. Command: /start
    09/03/09 18:36:57 [pm-process] Stopping Process: default_group~home~default_group~1 (1600851962:2016)
    *09/03/09 18:36:57 [libopmnoc4j] Process Stop Error: default_group~home~default_group~1 (1600851962:2016)*
    *09/03/09 18:36:57 [libopmnoc4j] Failed to construct stop command for proc: 1600851962*
    *09/03/09 18:36:57 [libopmnoc4j] Forcefully Terminating Process: default_group~home~default_group~1 (1600851962:2016)*
    ==================================================================================================
    The installer then indicates that the setup is successful despite the OPMN error. After the setup however, the Application server configuration assistant and the OPMN configuration assistant fail with the errors below:
    ==================================================================================================
    Launched configuration assistant 'Oracle Application Server Configuration Assistant'
    Tool type is: Optional.
    The command being spawned is: 'C:\product\10.1.3.1\OracleAS_1\jdk\bin\java -cp C:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\ascontrol.jar;C:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\log4j-core.jar;C:\product\10.1.3.1\OracleAS_1\jlib\oraclepki.jar;C:\product\10.1.3.1\OracleAS_1\jlib\ojmisc.jar; oracle.sysman.ias.studio.installer.ASControlConfigAssistant -sso false -j2eeinstance home -username oc4jadmin -password Protected value, not to be logged -oraclehome C:\product\10.1.3.1\OracleAS_1'
    Start output from spawned process:
    java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
    Exception in thread "main"
    End output from spawned process.
    Configuration assistant "Oracle Application Server Configuration Assistant" failed
    java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
    Exception in thread "main"
    Result code for launching of configuration assistant is: 1
    Launched configuration assistant 'Oracle Process Management and Notification Configuration Assistant'
    Tool type is: Recommended.
    The command being spawned is: 'C:\\product\\10.1.3.1\\OracleAS_1\\perl\\5.8.3\\bin\\MSWin32-x86-multi-thread\\perl.exe C:\product\10.1.3.1\OracleAS_1\config\launchopmnCA.pl'
    Start output from spawned process:
    C:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl.exe start stopproc reload startproc
    Launching C:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl.exe start
    opmnctl: opmn already running
    start status 0
    Launching C:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl.exe stopproc
    opmnctl: stopping opmn managed processes...
    stopproc status 0
    Launching C:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl.exe reload
    opmnctl: reconfiguring opmn...
    opmnctl: opmn reloaded successfully.
    reload status 0
    Launching C:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl.exe startproc
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=harbel_srv:6200
    1 of 2 processes started.
    ias-instance id=brnhb.harbel_srv.lbdi.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    default_group/home/default_group/
    Error
    --> Process (index=1,uid=983174492,pid=1016)
    time out while waiting for a managed process to start
    Log:
    C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log
    start status 152
    opmn not reloaded and restarted
    End output from spawned process.
    Configuration assistant "Oracle Process Management and Notification Configuration Assistant" failed
    =================================================================================================
    I have not been able to establish the cause of this problem, any help will be greatly appreciated.
    Edwin

    I have tried that option but the result was the same, however, I realized that there was a .err file among the installation logs and below are the contents:
    ===============================================================================================
    java.util.zip.ZipException: oversubscribed dynamic bit lengths tree
         at java.util.zip.InflaterInputStream.read(Unknown Source)
         at java.util.zip.ZipInputStream.read(Unknown Source)
         at java.io.FilterInputStream.read(Unknown Source)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1201)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:217)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:170)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:123)
         at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:338)
    java.util.zip.ZipException: oversubscribed dynamic bit lengths tree
         at java.util.zip.InflaterInputStream.read(Unknown Source)
         at java.util.zip.ZipInputStream.read(Unknown Source)
         at java.util.zip.ZipInputStream.closeEntry(Unknown Source)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:173)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:123)
         at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:338)
    Oracle JAAS [Tue Mar 10 12:16:26 GMT 2009] admin password is changed successfully
    opmnctl: starting opmn and all managed processes...
    ============================================================================
    I don't know whether this could have something to do with the error.
    Regards,
    Edwin

  • Oracle Oracle SOA Suite 10g (10.1.3.1.0) with Oracle Forms

    I need run an Oracle Forms 6i application on then web, after migration process that convert modules to Oracle Forms 10g modules, can i run my application on the Oracle Application Server latest version (Oracle Oracle SOA Suite 10g (10.1.3.1.0))?

    Forms and reports is not included in the 10.1.3 release - so you need to deploy Forms and reports on 10.1.2 and 10.1.3 on a different installation home. Next release of Forms will be 11
    Regards
    Grant

  • Facing Issue With Oracle SOA Suite 11.1.1.3.0

    Hi All,
    I am facing some issues with ORACLE SOA SUITE 11.1.1.3.0.
    Hope you people can help us out.
    Please find the issue details below along with all the relevant information’s
    I have following SOA suite installation at my server:
    Oracle 10g Express Edition Universal 10.2.0.1
    RCU 11.1.1.3.3
    Web Logic Server 10.3.3.0
    SOA suite 11.1.1.3.0
    JDeveloper 11.1.1.3.0
    The first thing what I have done is created a web service and deployed it to server without any issue.
    After that I created proxy client for that service and accessed it successfully from the client end.
    Till here no issue occurs.
    After that I applied few policies on top of web service and deployed it to server.
    The policy I had chosen was “oracle/wss_username_token_service_policy” [coming under OWSM policies list]
    While deploying there was no issue, all went well.
    2nd step I had created client using “oracle/wss_username_token_client_policy” policy which is counter part of above policy and tried to access the web service but failed.
    I have followed this blog:
    [http://biemond.blogspot.com/2010/08/things-you-need-to-do-for-owsm-11g.html ]
    Please have a look on service and client code:
    Service Code:
    package Demo_ScoreCard;
    import javax.jws.WebService;
    import weblogic.wsee.jws.jaxws.owsm.SecurityPolicy;
    @WebService
    @SecurityPolicy(uri = "oracle/wss_username_token_service_policy")
    public class ScoreCardWithPolicy {
    public double getPercentageWithPolicy(double markEng,double markMath,double markHindi,double markScience,double markSsc)
    double result;
    result= ((markEng+markHindi+markMath+markScience+markSsc)/500)*100;
    return result;
    Client Code:
    package com.tec.proxy.client;
    import java.util.Map;
    import javax.xml.ws.BindingProvider;
    import javax.xml.ws.WebServiceRef;
    import weblogic.wsee.jws.jaxws.owsm.SecurityPolicyFeature;
    public class ScoreCardWithPolicyPortClient {
    @WebServiceRef
    private static ScoreCardWithPolicyService scoreCardWithPolicyService;
    public static void main(String[] args) {
    scoreCardWithPolicyService = new ScoreCardWithPolicyService();
    SecurityPolicyFeature[] securityFeatures =new SecurityPolicyFeature[] { new SecurityPolicyFeature("oracle/wss_http_token_client_policy") };
    ScoreCardWithPolicy scoreCardWithPolicy =scoreCardWithPolicyService.getScoreCardWithPolicyPort(securityFeatures);
    Map<String, Object> reqContext =((BindingProvider)scoreCardWithPolicy).getRequestContext();
    reqContext.put(BindingProvider.USERNAME_PROPERTY, "testclient");
    reqContext.put(BindingProvider.PASSWORD_PROPERTY, "test12345"); // I have added this to the myrealm from console under security realms
    double arg1 = 77.2;
    double arg2 = 79.2;
    double arg3 = 77.2;
    double arg4 = 76.2;
    double arg5 = 67.2;
    double clientResult =scoreCardWithPolicy.getPercentageWithPolicy(arg1, arg2, arg3, arg4,arg5);
    System.out.println("clientResult with policy =====> " + clientResult);
    Error Log:
    SEVERE: WSM-07617 Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
    SEVERE: WSMAgentHook: An Exception is thrown: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
    Exception in thread "main" javax.xml.rpc.JAXRPCException: oracle.wsm.common.sdk.WSMException: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
    at oracle.wsm.agent.handler.wls.WSMAgentHook.handleException(WSMAgentHook.java:395)
    at oracle.wsm.agent.handler.wls.WSMAgentHook.init(WSMAgentHook.java:206)
    at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.newHandler(TubeFactory.java:105)
    at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.createClient(TubeFactory.java:68)
    at weblogic.wsee.jaxws.WLSTubelineAssemblerFactory$TubelineAssemblerImpl.createClient(WLSTubelineAssemblerFactory.java:148)
    at com.sun.xml.ws.client.WSServiceDelegate.createPipeline(WSServiceDelegate.java:467)
    at com.sun.xml.ws.client.WSServiceDelegate.getStubHandler(WSServiceDelegate.java:689)
    at com.sun.xml.ws.client.WSServiceDelegate.createEndpointIFBaseProxy(WSServiceDelegate.java:667)
    at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:362)
    at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.internalGetPort(WLSProvider.java:855)
    at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate$PortClientInstanceFactory.createClientInstance(WLSProvider.java:967)
    at weblogic.wsee.jaxws.spi.ClientInstancePool.takeSimpleClientInstance(ClientInstancePool.java:621)
    at weblogic.wsee.jaxws.spi.ClientInstancePool.take(ClientInstancePool.java:486)
    at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:782)
    at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:344)
    at javax.xml.ws.Service.getPort(Service.java:133)
    at com.tec.proxy.client.ScoreCardWithPolicyService.getScoreCardWithPolicyPort(ScoreCardWithPolicyService.java:86)
    at com.tec.proxy.client.ScoreCardWithPolicyPortClient.main(ScoreCardWithPolicyPortClient.java:23)
    Process exited with exit code 1.
    Not getting any help from any blog. Just wondering why this error is coming. I would be glad if you can help us in this regard.
    Apart from above issue I have few queries like:
    1.What is difference between OWSM policies and WLS policies?
    2.Are these the only policies we can apply on top of services?
    3.If some one wants to configure his own custom policies than what need to be done
    4.Could anyone please provide some useful links to implement ENCYPTION and SIGNATURE on top of web services?
    5.And If I am not wrong, I guess Oracle Service BUS OSB 11.1.1.3 has been removed from the main download link and version 11.1.1.4 has been provided. Is it
    compatible with SOA suite 11.1.1.3.0? If not where can I get OSB 11.1.1.3?
    Looking forward to hear from you people.
    Thanks
    Arvind
    Edited by: user8490871 on Apr 15, 2011 12:53 AM
    Edited by: user8490871 on Apr 15, 2011 12:53 AM

    Hi,
    I don't know why u get an error. Here are answers for additional questions:
    1. OWSM policies are for web services. WLS policies are based on Java EE security. They are used to protect resources e.g. URL, EJB
    2. I don't know about other policies
    3. See http://download.oracle.com/docs/cd/E14571_01/web.1111/e13713/owsm_appendix.htm#CHDCHFBH
    4. See http://download.oracle.com/docs/cd/E14571_01/security.1111/e10037/toc.htm
    5. I can see OSB 11.1.1.3 download link here
    http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
    Regards,
    Milan

  • Oracle SOA Suite 11.1.1.5.0 installation setup files

    Hi,
    Please share me the Oracle SOA Suite 11.1.1.5.0 and OSB installation setup.
    like Oracle Weblogic server for OSB, RCU, SOA Suite.
    I could able to find in Oracle site only the latest SOA version [11.1.1.6.3] not the older versions.
    Thanks,
    Pradeep

    Pradeep,
    You may find 11.1.1.5 installable at https://edelivery.oracle.com
    It is recommended to use latest version available though.
    Regards,
    Anuj

  • Schematron validation error in BPEL, Oracle Soa Suite 11g

    Hi Friends,
    As per the requirement, I have to validate all the mandatory element values from an XML payload and need to send the consolidated report to the source application with all the validation failure elements.
    I am trying to implement Schematron validation in BPEL, but its giving me the following error:
    +<remoteFault>+
    +<part name="summary">+
    +<summary>oracle.fabric.common.FabricException: Cannot get Object part 'result'. No parts are set on the message</summary>+
    +</part>+
    +<part name="detail">+
    +<detail>Cannot get Object part 'result'. No parts are set on the message</detail>+
    +</part>+
    +</remoteFault>+
    I have followed the below process and created very basic sample composite.
    1) Extracted the validate.wsdl from bpm-services.jar.
    2) Imported the validate.wsdl into my Jdev Project.
    3) Created partenr link based on the validation.wsdl and used Invoke activty to invoke the partner link.
    4) Created .sch file and passed to input variable of the invoke activity.
    If any one knows about this issue, plz help me. Or if any one has developed an example on how to use schematron in BPEL plz share it with me.
    Thanks
    Ramesh

    1) How often did u see SOA suite being used in Non-Oracle Apps projects i.e projects that do not use Oracle Applications as the source data provider.Frankly speaking, not very often but still there are many customers who are using/willing to migrate on Oracle SOA Suite because of the many advantages provided by 11g stack.
    2) How much Oracle Apps knowledge is required for choosing the career of Oracle SOA Suite Integration Architect? I would say that both the technologies have very less in common so it never depends on your level of Apps knowledge to architect a SOA solution. You have to learn SOA from scratch but if you have prior experience in Oracle Apps then it may not be very difficult for you to go ahead with SOA.
    Regards,
    Anuj

  • Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.

    Hi,
    Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.
    Getting the following exception when installing BPEL
    oracle.as.install.util.ActionFailedException : java.io.FileNotFound Exception :
    D:\software\bpel\bpel_oc4j\install\log.properties(The system couldnot find the specified).
    at oracle.as.install.action.LogConfigAction.execution(Unknown Source)
    at oracle.as.install.util.ActionQueue.run(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
    Caused by : java.io.FileNotFoundException : D:\software\bpel\bpel_oc4j\install\log.properties
    (The system cannot find the specified file)
    at java.io.FileInputStrem.open(Native Method)
    at java.io.FileInputStrem.<init>(Unknown Source)
    at oracle.as.install.action.LogConfigAction.execute(Unknown Source)
    at oracle.as.install.util.ActionQueue.run(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
    In the unzipped BPEL software folder for installation there is no such file.
    Have installed several Oracle SOA suite 10.3.1.0 on windows server 2003 - 32 bit using the same software.
    But now am using it along with a patch- p6712338 for windows server 2008-64 bit.

    If this is a production instance, you should NOT read past this sentence -- contact Oracle support to do it right.
    If this is just for testing/experiments, have you tried putting an empty file at D:\software\bpel\bpel_oc4j\install\log.properties? How about putting a copy of the file from one of your "windows server 2003 - 32 bit" installations?
    Good luck, Andy

  • Integration with PeopleSoft Applications Using Oracle SOA Suite 11g BPEL

    Hi,
    I'm integrating BPEL with Peoplesoft FSCM 9.0 Application on tools 8.49 using Oracle SOA Suite 11g. The BPEL invokes the web service method generated from Peoplesoft Component Interface in a synchronuos manner.
    I have deployed the BPEL in Oracle SOA Suite 11g using Jdeveloper successfully but I have problem in configuring the BPEL node in Peoplesoft side using Oracle SOA Suite 11g(FMW) . I had done the integration of BPEL with Peoplesoft FSCM 9.0 on tools 8.49 using Oracle SOA Suite 10g earlier successfully by configuring BPEL node properties as follows:
    BPEL CONSOLE : http://Host Name:8888/BPELConsole (System with Oracle SOA Suite 10g server for deployment)
    BPEL DOMAIN : default
    Using this BPEL node configuration, I was able to ping the BPEL console of Oracle SOA Suite 10g from peoplesoft and hence complete the integration successfully.
    Now in order to acomplish Business rules and other functionality, the BPEL application has been developed in Oracle SOA Suite 11g using Jdeveloper 11g. This time I'm not able to configure the BPEL node in Peoplesoft for this integration as I'm assuming there is no separate BPEL console in Oracle SOA Suite 11g. All the BPEL deployments are administered in console (11g console used for deployment of BEPL)
    http://Host Name:7001/em (System with Oracle SOA Suite 11g server - Fusion Middleware).
    So when I Configured the BPEL node property in Peoplesoft as :
    BPEL CONSOLE : http://Host Name:7001/em (System with Oracle SOA Suite 11g server for deployment)
    BPEL DOMAIN : default
    I'm not able to ping the Peoplesoft BPEL node to the Oracle SOA Suite 11g. Hence I'm not able to proceed with my integration.
    When I searched the OTN discussion forum on BPEL console for Oracle SOA Suite 11g, all threads point that there is no separate BPEL console unlike Oracle SOA Suite 10g. Also most of the articles for Integration with Peoplesoft Application using SOA 11g do not state any specific configuration setting for property of Peoplesoft BPEL node in order to integrate with BPEL 11g. The examples published in OTN still point towards screen shots of integration using SOA Suite 10g.
    So I'm not able to proceed in this regard.
    Any help in this regard is highly appreciated.
    Thanks in Advance,
    Girish
    Edited by: user11214154 on Nov 23, 2009 8:12 PM
    typo error

    Hi,
    I found this document from the Oracle Open World 2009 (maybe you have found it too) :
    "Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
    And this could be a little more simple, but have a good step-by-step tutorial.
    [http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
    I think you must read this docs by now, but never come amiss.
    Hope this can help you,
    By the way, if you can help me with this I'll appreciate it a lot.
    Unable to access the following endpoint(s)

  • Oracle SOA Suite 11.1.1.4.0  software download

    Hi
    Please provide the link for downloading the oracle Soa Suite 11.1.1.4.0 software
    Thanks in Advance

    PS3 (11.1.1.4) installable have been removed from OTN and EDelivery. You may log a SR with Oracle Support if you need PS3 installable for any purpose.
    Regards,
    Anuj

Maybe you are looking for

  • Import Problems and Missing Images

    Hi Firstly apologies for this being so long and so detailed, but I wanted to include as much as possible to narrow down options. I'd like to say before describing the problem(s) that I use lightroom 2 and have not knowingly changed any settings since

  • Extreme heat on an 2008 MBP

    Hi, My MBP has been heating up quite rapidly. The CPU has gone up to 74 degrees (Celsius), and the GPU to 76. About the same thing happened once when I was trying to load Windows 7 VIA Parallels. I figured I was overloading the CPU and therefor it wa

  • Desktop picture has disappeared and screen gone blue

    my 18 month old has got to my keyboard, and my desktop ahs gone blue and my picture gone, and the menu bar across the top keeps disapperaing, I have tried changing the picture but it makes no difference, help please?

  • Importing podcasts.txt problem

    Using iTunes 10.1 I exported my list of podcasts recently and iTunes saved this file as podcasts.txt Now I want to import that same list, there is no option to do this. How do I import it?

  • Re: authorization object

    Hi,     I have created authorizatin field for authorization object and class.  So now how can i add this authorizationh object for a particular user. rgds p.kp