Regarding Proxy to Soap

i have a proxy to soap scenerio can i test it with SOAP UI and i didnt have the WSDL can i test it with out WSDL,as i created the target based on the request strcture and imported the imported the WSDL how can i t test it with out URL give me some suggestions
Regards
sravan

Why you want SOAP UI to test Proxy to SOAP scenario? no need, trigger proxy program in ECC,it will send data to SOAP receiver.
You required WSDL for receiver structure, i hope you have compledted your development.
SEARCH IN SDN for SOAP receiver scenarios
Regards,
Raj

Similar Messages

  • Error while invoking the ABAP Proxy via SOAP Adapter

    Hi,
    My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
    SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
    Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
    SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
    With this approach, i am encountering the below error message
    2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    Any ideas on the above errror message? Any pointers or inputs will be appreciated.
    Thanks,
    Vinayak Kamath

    > 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    > 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    This is a generic error message which does not have any information about the error which has occurred.
    Do you see any error messages in the SOAP client?
    Regards
    Stefan

  • Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario

    Hi all,
    We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message.
    SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
    Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message 1364b76e-ecbf-11e4-85f4-000023acfde6.
    We are running PI 7.4.
    Any help is appreciated.
    Thanks,
    Pushpa

    Hi,
    Seems the Receiver Webservice is not reachable. Did you try to test it using SOAP UI tool.
    1. Test a fresh message from local SOAP UI tool.
    2. Pick 3rd party WSDL file and Import in SOAP UI tool.
    3. Put some dummy data for mandatory fields
    4. Trigger it msg and ckh if you get successful / response msg.
    5. Check if firewall is open and that URL is not blocked.
    Hope it helps
    Regards,
    Azhar

  • ABAP-Proxy to SOAP: Error in SOAP Adapter

    Hi!
    I would like to implement ABAP-Proxy to SOAP scenario.
    Unfortunately my SOAP receiver channnel has the following error:
    SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No SOAP Envelope but 1 definitions; HTTP 200 OK: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Furthermore the call of  /sap/bc/soap/rfc of business system B is erroneous
    http://<server system B>:8000/sap/bc/soap/rfc
    Here I get the error: HTTP 500 Internal Server error
    Can some one help me to solve this problem?
    Thank you very much!
    regards
    Holger

    Hi,
    Are you using the webservice exposed by SAP or it is third party webservice. Can you explain your complete scenario? What is the url you have given in your receiver SOAP Channel? Was that no configured earlier?
    If at all you are using the SAP webservice, the wsdl link should be.
    http://<server>:<http port>/sap/bc/soap/wsdl11?services=BAPI_MATERIAL_EXISTENCECHECK&sap-client=200
    The target url you will be able to see in the wsdl itself also
    amit

  • Error "soap fault: No operation available for request" in proxy to soap Scenario

    Hi Experts,
    Unable to trace the below error when pushing the message from RWB while testing the PROXY to SOAP interface
      Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: No operation available for request {http://schemas.xmlsoap.org/soap/envelope/}Envelope.
    Thank you very much if any one provided the solution
    Regards,
    Yugandhar 

    Hi Yugandhar,
    Check the below thread,
    Connecting from SAP PI To Salesforce
    Regards
    RK N.

  • Error in Proxy to SOAP synchronous scenario

    Hi Gurus,
    Hope you are doing well. I have a Proxy to SOAP synchronous interface interacting with an external system (system outside the firewall/landscape of my company).
    When I am trying to post the request message from XI, I am getting the following error.
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The server was unable to process the request due to an internal error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs
    In the WSDL provided by the external application, i.e. receiver WSDL, there is no attribute/field with the name 'IncludeExceptionDetailInFaults' and there is no fault string defined.
    Where is this error being thrown up? Is it a network/firewall error that XI is unable to determine?
    Please provide an answer as soon as possible.
    regards
    Debansu

    Hi,
    i think it is the problem in the WSDL provider system, because it is throwing the Error with some string".NET",
    do the below steps for investigating the issue
    1)try pinging the URL provided in the WSDL from internet explorer.
    2)if it is successfull, try to push one message from SOAP UI to by importing that WSDL, if you get any error then it is problem in the end system.
    Thank You,
    Madhav

  • Error in synchronous( abap proxy to soap)scenario

    Hi experts,
    My scenario is synchronous abap proxy to sysnchronous soap. for proxy I am using business system name as ERDCLNT220 and soap business system name as BS_HRS_DEV
    configuration steps are
    1. only client proxy to soap scenario I have done.
    communication channels: only receiver soap adapter. no proxy sender communication channel for client proxy.
    Already we have RFC destination connection and connection type H for proxy to xi.
    1.Is it required RFC destination connection for xi to server proxy.
    2.Is it required receiver proxy communication channel for server proxy?.
    i HAVE TESTED THIS INTERFACE. I am able to send the request. But I am not able to receive the response from soap webservice message .
    error is:
    SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson. Setting message to status failed.
    Kindly help me.
    advance thanks
    thanks and regards
    elton
    Edited by: eltonsaranya on May 9, 2011 10:27 AM

    Your exception message shows problem at the webservice side.
    Check the following:
    a) you need two mappings one for proxy req to soap request and other soap response to proxy response
    b) You need to create service interfaces both sender and receiver synchronous .
    c) communication channel  QOS is best effort for both sender and receiver
    d) I dont see problem in soap configuration. Bcuz you are able to ping and while getting response from the method getPerson it fails.
    f) See your SOAP response structure matches with WSDL provided.
    g) You can also test outside PI.. I meant testing via soap client tool like SOAPUI  for that web service. So that you know whether problem exists on the target system or not.
    Hope that helps.

  • ABAP Proxy to SOAP using PI

    Dear Friends,
    I have the requirement ABAP Proxy to SOAP using PI.
    In R/3 I had generated the proxy , after that what I need to do.
    Please suggest me.
    Regards,
    Shalini Shah

    Hi Shalini,
    There are loads of blogs and discussion threads available to help you with this scenario. Just check the following links:
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79?quicklink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/advancedsearch?query=proxytosoap+scenario
    Please go ahead and check the documents and let us know if you have any doubt.
    Rgds,
    Puneet

  • Proxy to SOAP in PI 7.1

    Hi Experts
    I have requirement for Proxy to SOAP (Synchronous) and it needs a BPM to get the response from SOAP and post to the Proxy
    Can any send the Prototype
    Thanks
    PR

    BPM design:
    Receive(Async From Proxy) -
    > SyncSend(To SOAP) ---> Send(Async from BPM to Proxy)
    you need to have:
    1) 1 OB Async SI for SAP ---> BPM.......1 ABS Async SI to receive the SAP message into BPM.....message in both the SIs is the Proxy structure
    2) 1 ABS Sync SI for BPM <---> SOAP ...... 1 IN Sync SI at the SOAP side
    3) 1 ABS Async SI for BPM----> Proxy.......1 IN Async SI at the SAP end....message will be the Proxy structure.
    You may need:
    1 OM for BPM <---> SOAP flow
    1 OM for BPM ---> Proxy....
    Have you opened one more thread with the same requirement??
    Regards,
    Abhishek.

  • "Configure Proxy in SOAP Receiver"

    Hi ,
    Can some one help in providing me the information regarding "Configuration of proxy in SOAP receiver adapter (PI 7.1).
    Thanks ..

    Hi Stefan,
    I have my Proxy Values ,the Host and the Port ...even then i am facing some issues., I want to know are there any other details which needs to provided inorder to configure proxy ...(My receiver  is a 3rd party Webservice outside the firewall.)
    Do i need to check the conversion parameters.
    Error:
    SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: "*********************************". at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.RouteRequest(SoapServerMessage message) at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)</SAP:AdditionalText>
      <SAP:Stack />
    Edited by: Madhusree  Nagalla on Oct 28, 2010 3:28 PM
    Edited by: Madhusree  Nagalla on Oct 28, 2010 3:29 PM

  • Proxy to SOAP

    HI Experts ,
    Have a query.
    We have a proxy to SOAP scenario in which there is a requirement that once the request parameters are going on to the webservice there can be a chance that the webservice is down or authentication parameters are wrong. In that case we require a reply back to the request after certain time that the request couldnt be processed due to either failure of authentication parameters or some other reason.
    Basically what we want is that we want that request to wait wait for certain amount of time , if not successful gives back message to the wizard after certain attempts say 2.
    How can we achieve this . Where can we do these settings in PROXY or IN SAP PI.
    Need your inputs.
    Regards,
    Saras

    there can be a chance that the webservice is down or authentication parameters are wrong
    in such a case PI/XI itself will throw an alert in SXMB_MONI...your task will be to capture that particular and send it back to the SAP system......
    I dont know how BPM will capture such types of alert.....
    There is a blog by Bhavesh...explaining how to throw an alert if the end system is down...implemented using an UDF in message mapping...just search you will get it easily
    this is the blog:
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Edited by: abhishek salvi on May 15, 2009 11:01 AM

  • Proxy to SOAP Scenario

    Hi,
    I have a requirement where the scenario is Proxy to SOAP (synchronous) from SAP CRM to the third party system. On XI we have a web service which will be invoked to create a SOAP request and receive SOAP Response.
    Can someone please tell the Step by Step procedure for this scenario and what all objects need to be created in IR and ID.
    Thanks,
    Vikas

    Hi Vikas,
    I think you are quite new to XI.
    The IR objects need to be created for this scenario are listed below.
    1. 2 data types one for request proxy(outbound) and the other one for response proxy(inbound) and 2 message types associating these two data types.
    2. You need to import WSDL files (for Request and Response webservice schema) under the External Definitions Tab.
    3. 2 message Interfaces one for outbound and the other one for inbound(both will be synchronous), select output message and input messages accordingly.
    4. Two message mappings one from Proxy to webservice and the other one fron Websevice to proxy
    5. One interface Mapping.
    Activate all the IR objects when they are created.
    ID objects need to be created for this scenario
    1. Create a configuration scenario
    2. Assign sender and receiver business systems to this configuration scenario from the Objects Tab.
    (you can also create a business service, incase the business system is not defined in SLD)
    3. Create 2 communication channels, one under each business system.
    For exp: suppose the names of sender and receiver systems are SAP and Webservice respectively.
    Create a communication channel for exp: proxy_sender for SAP system.
    Attributes for communication channel Proxy_sender are:
    Channel Name: Proxy_sender
    Serveice: SAP (sender Busines system in your case)
    Adapter type: XI(browse it from the list) and check the radio button sender.
    Transport protocol: HTTP 1.0
    Message protocol: XI 3.0
    Adapter Engine: Integration server(if you are using any non central adapter engine then select the same from the list)
    select the HTTP security depending on the requirement.
    Create another communication channel for exp: SOAP_Receiver for webservice system.
    Attributes of communication channel SOAP_Receiver are:
    Channel Name: SOAP_Receiver
    Serveice: Webservice(receiver Busines system in your case)
    Adapter type: SOAP(browse it from the list) and check the radio button Receiver.
    Transport protocol: HTTP
    Message protocol: SOAP 1.1
    Adapter Engine: Integration server(if you are using any non central adapter engine then select the same from the list)
    Target URL: Mention the URL of the server where the webservice is executed.
    Configure the
    Receiver Determination,Interface Determination,Sender Agreement and Receiver Agreement for this scenario.
    Activate all the objects created under the configuration scenario from the change lists Tab.
    I beleive it is good enough to start with, although I have not explained the configuration steps in details.You start the implementation, in case you have any doubts please post it.
    Best Regards,
    Nitin...

  • Proxy to SOAP with an attachment

    Hi all,
    we have a scenario proxy to soap,and the volume of data sending from proxy to soap is more than 20 mb.
    as the third party system can't receive 20MB of data in one single soap message and we can't split this message as the whole data is related one WorkOrder. we thought of sending the SOAP message with an attachment.could any one guide me how can i attach the payload data to soap as an attachment and send.
    thank you.

    Hi,
    It's pretty easy - just have a look at my article:
    The specified item was not found.
    and let me know if this works out for you
    Regards,
    Michal Krawczyk

  • Proxy to SOAP Sync with BPM (1:N)

    Hi
    Proxy to SOAP Sync and return message will be posted back to R/3 via proxy. This is Async to Sync using BPM. And the split happens in BPM as well. We are suppose to go with BPM here, that's the mandatory step for learning purpose
    I am trying to follow the steps below
    1. OB Async MI Proxy outbound message into XI
    2. ABS Async MI to receive the proxy message into BPM
    3. ABS Sync MI SOAP Sync message
    4.ABS Async MI for Proxy Inbound to R/3
    5. BPM for Split
    I am at the stage of writing spec, can't execute any of the steps and have no prior experience with this kind ofscenario. If anybody have experience, please do share exact steps. Thanks in advance

    Hi,
    Your steps are correct ... in the IP, the following steps will be there -
    Rcv -> Transform -> Send (sync) -> Transform -> Send (async).
    I am not too sure what you mean by step 5 - BPM for split ?
    Regards,
    Neetesh

  • Proxy to soap synchronous

    Hi.
    In my synch proxy to soap scenario, facing the error while testing web service from altova spy.
    Err thrown after i send request is "<RCVR Deter> "MESSAGE_INCOMPLETE"
    This is when i use WSDL generated from my ID.
    When i use wsdl given from client it doesnt post at all, with message code (500).
    Scanned sdn and asked everyone i cud, but cudnt hit any solution.
    I noticed following things in WSDL given by client,
    1. URL within WSDL's adress tag, when pasted in browser doesnt opens WSDL or any web page rather  says "Welcome to axis.."
    2,When added ?wsdl at the end of the url, the wsdl can be seen.(so using URL with "?wsdl" as my target URL in soap receiver ID, is approach right??)
    3.In WSDL from client has, <wsdl:operation name="XXX" parameterOrder="XXXXX">
    what ideally shud be approach when soap is at receiver end.
    Also, Great confusions about These::
    1. URL in target url in soap receiver
    2.URL of file location, while sending request. (shud b wsdl file saved in desktop, or url of wsdl )
    3.soap end point and action (what if, when no action is there in wsdl) when changing soap parameters 
    4.In moni and also in altova getting err <Receiver determintaion> Message_incomplete
    5.when to use wsdl generated from ID and when to use wsdl provided from client.
    I am badly stuck in this scenario. Couldnt find any way out, at the same time its v v critical object.
    wud be thankful if someone can help me in sorting out this..
    thanks

    5.when to use wsdl generated from ID and when to use wsdl provided from client.
    This should be your first question
    Use wsdl generated by ID in case of soap sender scenarion and use wsdl from client in case your scenario is soap receiver.
    This is when i use WSDL generated from my ID.
    For the receiver soap scenario, you dont have to generate wsdl in ID. Use the wsdl given by receiver.
    When added ?wsdl at the end of the url, the wsdl can be seen
    If your scenarion could work after adding this, then there is nothing wrong in this approach.
    1. URL in target url in soap receiver
    Use the URL provided by the receiver system. The same url is present in the wsdl file that receiver provide to you.
    2.URL of file location, while sending request. (shud b wsdl file saved in desktop, or url of wsdl )
    What do you mean by this? For a soap receiver channel, you only need the URL and use the wsdl provided by receiver.
    3.soap end point and action (what if, when no action is there in wsdl) when changing soap parameters
    Action is not compulsary. Just use the wsdl provided by client and check whether it contains <action> tag or not. If it has, then only provide the action.
    4.In moni and also in altova getting err <Receiver determintaion> Message_incomplete
    Your case is of soap receiver. You should not send messge from Altova to XI in this case.
    Regards,
    Prateek

Maybe you are looking for