Regarding RFC Sender Communication Channel

Hi All,
I am working on RFC sender channel, need some important information.
1). Can i use single RFC Sender Channel in Multiple Sender Agreements.
2). Can i use Program ID in Multiple Sender RFC Channels. I am having one RFC to File interface and another RFC to JDBC interface.
Do i need to create 2 sender channels and 2 RFC destinations with 2 Program Ids????.
Please give me clarifications.
Regards,
Balu

If i will use single sender RFC channel and Single Program ID for my all sender agreements, how that Single RFC channel
will identify the information like
In our sender agreement we configure not only the channel but also the Sender Interface (in your case RFC)......this is the factor which defines what to accept......in broader term we use the same concept of channel re-use in other cases also and the same work fine because of this Sender Interface.
I found Q28 interesting: https://service.sap.com/sap/support/notes/730870
In first read it may sound confusing...but after some more rreads you will know what the answer means in the SAP note.
Regards,
Abhishek.

Similar Messages

RFC Sender Communication Channel is not Working Properly

Hi All,
I had a Small Problem.
I had configured RFC Sender in Asyn mode as given in Weblog 5398
The Scenario is working fine for 1 time, after the execution the Communication Channel should be made Active again to make it work for the next time.
For every time to Execute the Scenario i had to Activate the RFC CC.
It is some complicated one. So any one please suggest me what can be done to Resolve the issue.
Thanks in Advance.
Sriram

Hi Bhavesh,
when we test RFC connection it is Failing and giving this error
Error Details     ERROR: timeout during allocate of registered program
Error Details     LOCATION: SAP-Gateway on host p162845 / sapgw00
Error Details     DETAIL: TP Flightdatasender init/busy for more than 60 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 31415
If I Activate the RFC sender CC.It is working again.
After 1 Execution.It is throwing this error.
I even added Name as 'jco.server.max_startup_delay' and Value '1000' in advanced Mode of RFC sender CC.
Please suggest me.
Thanks in Advance.
Sriram

RFC sender communication channel

Hi,
I am working on RFC->XI->SOAP scenario. In R/3, I maintainted an RFC destination with program id same as RFC sender CC in XI, Gateway and host of XI server. But when i test connection the RFC destination, I am getting the following error.
/CPIC-CALL: ThSAPOCMINIT'Transaction program not registered'
Error details: program 'testid' not registered.
What could be the reason and pls let me know if there are any thing else need to be checked or configured. Any blogs or example links are an additional help.
Thanks
Ricky

1) In sap gateway (smgw) of R/3 sender, what should LU Name and TP Name contain? I am right now only seeing R3 host and gateway service respectively for both the columns. Is this correct?
>>>LU name is R/3 Host name. To get the gateway service , go to SMGW>Menu in there GOTO->Parameters-->Display..
Generally it is sapgwXX where XX means System no.
2) The Gateway host of RFC destination in R/3 sender should be what? Is it the business system name in XI for the sender R/3?
>>>It should be Application Server details of the Application System i.e R/3 system. U can get this from the SAP logon pad and application host name. It is not XI server.
Hope this helps,
regards,
Moorthy

Get parameters for rfc sender communication channel

Hello everybody,
does anybody know how to establish the values for the cc-parameters?
For example:
Where do I receive information about:
- the Application Server (Gateway) = Gateway host name of the sender system
- the Application Server Service (Gateway)
- the Program ID
etc.
Regards Mario

hi,
did you have a look at my weblog?
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
>>>- the Application Server (Gateway) = Gateway host name of the sender system
fomr SAPlogon
>>>>- the Application Server Service (Gateway)
SAPGW + system number from SAPlogon
>>>>- the Program ID
any name
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Feilds require in RFC sender Communication Channel

My scenario is RFC to webservice
The scenario is in X13 server(system No.01)and RFC is in X32(system no:00)
For proceeding in this scenario i require following parameter
Please do help me with this same:
1) application server(gateway)
2)application server service(gateway)
RFC Metadata repository parameter
3)Application server;

Hi,
Go to SMGW Transaction in Application System (R/3)
Goto GO to--Parameters-Display
You will find out Gatewya & Gate way service
Reward Points if helpful
Regards
Sesh

Error in sender communication channel

Hi,
I am doing File to RFC scenario in which i am using Standard bapi to get the cost from the sap system
while sending the data in sender communication channel the processing mode is in delete mode but it is not deleting and throwing the error
Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
this error is from sender communciation channel..
can any one give some inputs for this...
regards,
Kishore

K.P.N.,
i have checked it getting the same error. in moni also administrative cache clear error is coming
do we need to do any workaround...
regards
Kishore

Sender Communication Channel Monitoring Error

Hi....Experts,
i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
pls suggest me how can i rectify these errors..
for helpful answers i will give points*********
regards,
Pasi.
Edited by: pasi s on May 5, 2008 8:35 AM
Edited by: pasi s on May 5, 2008 8:40 AM

Hi Pasi,
Check if you are using the same business service (under which u have created the Channels) at sender side in configuration.
You have to use the same business serivce for sender under which your communication channels are created...................
Or
Create a sender communication channel in the service that u have used at sender side.............
So i think in your case there is a mismatch of using the diff sender service at diff stages.............
Hope this will solve your problem
Thanks
Sai
PS: kindly reward points if helpful

Why is a sender communication channel not required for IDOC and PROXY ?

Hello,
In case of IDOCs, metadata will be available in PI for the IDOCs used both at inbound and outbound.
Why is a sender communication channel is not required in case of IDOC and PROXY outbound scenarios (i.e. IDOC to File or PROXY to file ..) when a receiver channel is required for scenarios like file to IDOC or file to PROXY.
Though this might be a regular question, I am not able to find a proper reason.
Please let me know the reason for the above request.
Thanks & Regards.

You will create RFC destination in ECC , it will have details about PI system details, when ever you send IDoc, ECC will use Port and RFC destination to connect PI Integratiion engine to deliver data to PI.
But when receiver side you will create RFC destination in PI with ECC details, but to call RFC destination and Port we need medium that was the reason we create IDoc communication channel.
Even the same case for Proxy also, but HTTP deastination establish the conection between ECC and PI, but receiver side you have to create XI channel with PI integratioin engine adress to post data.
Regards,
Raj

Why Can't see RFC Sender communicaiton channels and Sender Agreenment

Why Can't see RFC Sender communicaiton channels and Sender Agreenment,
but other type communicaiton channels is ok.

hi
If the sender is R/3 then it has connection directly through RFCs .
XI system can understand HTTP procal directly without any communication channel.
It is the same case for both sender R/3 RFCand IDOC adapters.
more over u can registered to IMPORTS permitted for RFCs and IDOCs while creating the name space as WEB AS ABAP.
regards
sreeni

BIC Module Error in Sender Communication channel for EDI to File scenario.

Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
Abhishek

Hi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish

File Structure - Sender Communication Channel

Hi All,
My Sender flat file structure is below like this
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
I did the Sender Communication Channel configuration - Content Conversion
Document Name : XXX
Document NameSpace: XXXX
Recordset Structure: MT_Test,*
Recordset Sequence: Ascending
Key field Type: String Case-Sensitvie
MT_Test.fieldNames: Filed1,Field2,Field3,Field4,Field5,Field6
MT_Test.fieldSeparator: '|'
MT_Test.additionalLastFileds: ignore
MT_Test.endSeparator : 'nl'
ignoreRecordsetName: true.
But its pick the file, In SXMB_Moni show Currect...
But in Runtime workbench, in Communication Channel moni, it show below like this,
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_Test xmlns:ns0="http://XXXXX">
<JOBS />
</ns0:MT_Test>
What is the Issue, where i missed some thing, In message mapping, its correct..
Thanks.
SR

SR,
I am still little confused with your below statement.
But its pick the file, In SXMB_Moni show Currect...
But in Runtime workbench, in Communication Channel moni, it show below like this,
>
> <?xml version="1.0" encoding="UTF-8" ?>
> - <ns0:MT_Test xmlns:ns0="http://XXXXX">
> <JOBS />
> </ns0:MT_Test>
You mean to say that in MONI, the mapping output is fine, but when you check the output at RWB -> CC Monitoring for the Sender Channel, then you get the above mentioned XML?
This means that there is nothing wrong with your source CC settings. If the entry in RWB -> Sender CC is wrong, your MONI entry will never be right. So, this is really weird.
What is the source structure that you have defined in DT?
Regards,
Neetesh
Edited by: Neetesh Raj on Sep 29, 2009 2:31 PM

Adapter Module not working in Sender Communication Channel working in recie

Hi
I have written one adapter module. IF i give that Adapter Module in Sender Communication channel its not working. If i give that in Reciever Communication Channel its working. If i mention in both the channels then its working in sender communication channel also.But in only sender communication channel its not working in only reciever communication channel its working Can any one tell me why its happening
Thanks & Regards
Ravi Shankar B
Message was edited by:
        RaviShankar B
Message was edited by:
        RaviShankar B
Message was edited by:
        RaviShankar B

hi
if its problem with my code why its working if i give the adapter module in both the communication channels?If i give in only sender communication channel the module is not invoking. its not showing any auditlogs.Can any one please help me
OUTBOUND is for sender
INBOUND is for reciever right.?
the following code i have written
public ModuleData process(
          ModuleContext moduleContext,
          ModuleData inputModuleData)
          throws ModuleException {
          String SIGNATURE =
               "process(ModuleContext moduleContext, ModuleData inputModuleData)";
          Object obj = null;
          Message msg = null;
          String filename = null;
          AuditMessageKey amk = null;
          try {
               obj = inputModuleData.getPrincipalData();
               msg = (Message) obj;
               System.out.println("&&&&&&&&&&&&&&&&&" + msg);
               if (msg.getMessageDirection().equals(MessageDirection.OUTBOUND)){
                    amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.OUTBOUND);
                    Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
               }else{
                    File filename1 = new File("
10.7.1.43
XI
source","text.txt");
                    filename1.createNewFile();
                    amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
                    Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
               System.out.println("**************" + amk + "***********");
          } catch (Exception e) {
               Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> GetHostName: Error Module called");
               e.printStackTrace(System.err);
               ModuleException me = new ModuleException(e);
               throw me;
          // Read the channel ID, channel and the module configuration
          try {
               Hashtable mp = (Hashtable)inputModuleData.getSupplementalData("module.parameters");
               if(mp != null){
                    filename = (String)mp.get("FileName");
                    Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,"Host >>> Element Name is set to {0}"+filename );
               }else{
                    Audit.addAuditLogEntry(amk,AuditLogStatus.WARNING,"HostElementName parameter is not set. Default used: HostName.");
                    filename = "FileName";
          } catch (Exception e) {
               e.printStackTrace(System.err);
               Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
               ModuleException me = new ModuleException(e);
               throw me;
          try {
               XMLPayload xmlpayload = msg.getDocument();
               DocumentBuilderFactory factory;
               factory = DocumentBuilderFactory.newInstance();
               DocumentBuilder builder = factory.newDocumentBuilder();
               Document document =
                    builder.parse((InputStream) xmlpayload.getInputStream());
               Element rootNode = document.getDocumentElement();
               if (rootNode != null) {
                    Element childElement = document.createElement("filename");
                    childElement.appendChild(document.createTextNode(filename));
                    rootNode.appendChild(childElement);
               // Transforming the DOM object to Stream object.
               TransformerFactory tfactory = TransformerFactory.newInstance();
               Transformer transformer = tfactory.newTransformer();
               Source src = new DOMSource(document);
               ByteArrayOutputStream myBytes = new ByteArrayOutputStream();
               Result dest = new StreamResult(myBytes);
               transformer.transform(src, dest);
               byte[] docContent = myBytes.toByteArray();
               if (docContent != null) {
                    xmlpayload.setContent(docContent);
                    inputModuleData.setPrincipalData(msg);
          } catch (Exception e) {
               e.printStackTrace(System.err);
               Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
               ModuleException me = new ModuleException(e);
               throw me;
          return inputModuleData;
Best Regards
Ravi Shankar B
Message was edited by:
        RaviShankar B
Message was edited by:
        RaviShankar B

JMS sender communication channel content conversion

Hi,
I struck with the content conversion in the JMS Sender communication channel.
I have configured the communication channel with the filed fixed lengths. (Simple type)
The field fixed lengths i have given are 10,2,3,11
The contents in the file 1000000072 230 111
but, in the input xml after conversion iam getting 100000007 in the first field and 2 in the second field 23 in the third field.
I have configured the sender communication channel as in the document in SDN.
Even, i configured several communication channels. I didn't get this strange error any time.
I have gone through SDN to fix this issue, but i didn't get solution.
If anyone got rectified this kind of error, please answer your solution to me
Thanking you,
Regards,
Krishnaraju.

Hi,
Thanks for all your support. The issue got resolved.
The issue is due to the file, In the file the special characters are appearing. We are not able to see these characters in the notepad, wordpad, text editor.
But, these characters are appearing in th syn text editor. So, we removed those characters and processessed the file. Now, it is successfull.
Regards,
Krishnaraju.

JMS (Sender Communication Channel) and MQ in Mainframe (Legacy) System

Hi All,
Can we use JMS Sender Communication Channel in XI that runs on Windows 2003 server to DIRECTLY poll messages from MQ in Mainframe (Legacy) system??
I understand that we can install MQ on XI server and have mainframe push the messages to XI MQ so that JMS can poll but wanted to see if there is a way to do this without having MQ on XI server.
If you know of any documentation regarding this, can you please post it?
Thanks,
Jay

Jung,
Are you looking for this help:
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Also check this sap help:
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
---Satish

JDBC Sender Communication Channel Problem

Hello everybody,
I have a sender communication channel, it is with green Functioning status in channel monitor in runtime workbench, and the log says "Process started" for every pool as configured, but it doesn't return any data to XI, and there's data to be taken, the problem started a few hours cause it was working fine, I've already executed a Complete refresh cache in SXI_CACHE, and changed the channel from Active to Inactive in ID, and Stopped and Started it again in RW, it doesn't give any errors, but it doesn't bring back any data that should be, any suggestions or maybe any information on how to refresh totally those channels????, thanks in advance.
Regard's
Paul

Hi Paul
Check for JDBC adapter locks. cpa cache locks are not relevant to your problem.
Moreover check with the visual admin logs as well. if you can get info about the issue you have
Thanks
Gaurav

Regarding RFC Sender Communication Channel

Similar Messages

Maybe you are looking for