Regarding RRI reports

Hi all,
can any one plz tell me, in any RRI report where can we find the receiver report name??

Hi,
In transaction RSBBS, enter the name of the Sender Query and press enter. It wil show the names of the Receivers.
if receiver is a query, then its COMUID will be displayed along with the Description. IF you want to find the technical name of the query then copy the name of the receiver abject and enter it as COMPUID in table RSRREPDIR.
- Jaimin

Similar Messages

  • Doubts regarding RRI

    Hello Friends,
    I have some doubts regarding RRI, please go through below questions.
    I have 2 queries 1. sales report  2. Sales report world
    I have built a jump target in RSBBS by giving sender and receiver details
    In sales report I have the following data, my useer requirement is If he select one material -> right click -> goto -> jump to world report, then he wants to see the data for only that particular material , bu in my case it is showing for all the materials which are in 1st query.
    Material--Dist Channel-Month
    098647A639          G2     201002
    098647A781          G2     200909
    0265231927          G2     200901
    0986479560          G2     200912
    0204011474          G2     200912
    098647A711          G2     201002
    098647B772          G2     200909
    0986473371          G2     200901
    0265216627          G2     200901
    1987482222          G2     200901
    1987482202          G2     200901

    Hi,
    I have same requirement, I achieved by selecting go to on the respective company, Sales document (in my case). I have done no settings in assignment details.
    I have another RRI requirement.
    When we are in the report for Invoice, when we click on the Billing Document, It should go to transaction "VF03" in R/3.
    I can able to achieve (we have SSO logon configured).
    My requirement is when we select goto VF03, it should go to the respective billing document on which we right clicked, now i'ts displaying only VF03 transaction. It should display display of the respective Billing Document.
    Can anyone help to resolve the issue?
    Thanks in advance,
    Venky

  • Questions regarding RRI

    Hi Folks,
    I have two questions regarding RRI:
    1) Is it possible to define jump by selecting more than one value of a fileld/variable ? My RRI is working with one value. But if I mark more than one value and goto jump, the new query just uses the first value from my selected list
    2) Is it possible to jump to a workbook ?
    Thanks

    Hi,
    1) Is it possible to define jump by selecting more than one value of a fileld/variable ? My RRI is working with one value. But if I mark more than one value and goto jump, the new query just uses the first value from my selected list
    In RSBBS when you are defining the RRI you can choose the variables which are common in the reports to pass values to the next query.
    2) Is it possible to jump to a workbook ?
    No jump to a workbook is not possible.
    regards,
    Arvind.

  • Help needed regarding ALV report

    Hi,
    I have a query regarding ALV report.
    The requirement is as follows:-
    When the user executes the ALV report and if he sums one numeric field column values and filters out some of the field columns ( for example there r 5 columns in the report and the user has filtered out 2 of them and viewing only 3 columns)
    and now the requirements is that when the user runs the report later he should see the modified report ( i mean only 3 cloumns and the total value of the column which he has made) but not the original output which was there when the report was developed.
    First of all i wanna know is it possible to do r not. If yes then how
    Hope u have got what i want.
    eagerly waiting for ur reply.
    regards,
    maqsood

    Hi
    Yes you can! You have to manage the layout variant.
    So when you call your ALV you have to set the parameter I_SAVE = 'A'.
    In this way you'll allow the user to save the variants for layout.
    After you has to have a chance to choose the variant in selection-screen.
    See the demo program BCALV_GRID_11 to manage the variant in selection-screen.
    Max

  • Regarding Interactive reports

    Hi All,
    Yesterday i submitted a query regarding Interactive reports.and i recieved lots of reply .But the replies are all about ALV interactive report.I want to know just about the interactive reports where ew use AT LINE OF SELECTION, HIDE e.c.
    PLZ send methe documents related that.
    Thanks and Regards
    RASHMI

    Hi
    Interactive Reports
    As the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers. And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.
    We can have a basic list (number starts from 0) and 20 secondary lists (1 to 21). Events associated with Interactive Reports are: 1. AT LINE-SELECTION 2. AT USER-COMMAND 3. AT PF<key> 4. TOP-OF-PAGE DURING LINE-SELECTION. HIDE statement holds the data to be displayed in the secondary list. sy-lisel : contains data of the selected line. sy-lsind : contains the level of report (from 0 to 21)
    Interactive Report Events:
    AT LINE-SELECTION : This Event triggers when we double click a line on the list, when the event is triggered a new sublist is going to be generated. Under this event what ever the statements that are been return will be displayed on newly generated sublist.
    AT PFn: For predefined function keys...
    AT USER-COMMAND : It provides user functions keys.
    REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
    HEADING.
    *TABLES DECLARATION
    TABLES : KNA1, VBAK, VBAP.
    *SELECT OPTIONS
    SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
    *INITIALIZATION
    INITIALIZATION.
    CUST_NO-LOW = '01'.
    CUST_NO-HIGH = '5000'.
    CUST_NO-SIGN = 'I'.
    CUST_NO-OPTION = 'BT'.
    APPEND CUST_NO.
    *SELECTION SCREEN VALIDATION
    AT SELECTION-SCREEN ON CUST_NO.
    LOOP AT SCREEN.
    IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
    MESSAGE E001(ZTJ1).
    ENDIF.
    ENDLOOP.
    *BASIC LIST SELECTION
    START-OF-SELECTION.
    SELECT KUNNR NAME1 ORT01 LAND1 INTO
    (KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
    FROM KNA1
    WHERE KUNNR IN CUST_NO.
    WRITE:/1 SY-VLINE,
    KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
    16 SY-VLINE,
    KNA1-NAME1 UNDER 'NAME',
    61 SY-VLINE,
    KNA1-ORT01 UNDER 'CITY',
    86 SY-VLINE,
    KNA1-LAND1 UNDER 'COUNTRY',
    103 SY-VLINE.
    HIDE: KNA1-KUNNR.
    ENDSELECT.
    ULINE.
    *SECONDARY LIST ACCESS
    AT user-command.
    IF SY-UCOMM = 'IONE'.
    PERFORM SALES_ORD.
    ENDIF.
    IF SY-UCOMM = 'ITWO'.
    PERFORM ITEM_DET.
    ENDIF.
    *TOP OF PAGE
    TOP-OF-PAGE.
    FORMAT COLOR 1.
    WRITE : 'CUSTOMER DETAILS'.
    FORMAT COLOR 1 OFF.
    ULINE.
    FORMAT COLOR 3.
    WRITE : 1 SY-VLINE,
    3 'CUSTOMER NO.',
    16 SY-VLINE,
    18 'NAME',
    61 SY-VLINE,
    63 'CITY',
    86 SY-VLINE,
    88 'COUNTRY',
    103 SY-VLINE.
    ULINE.
    FORMAT COLOR 3 OFF.
    *TOP OF PAGE FOR SECONDARY LISTS
    TOP-OF-PAGE DURING LINE-SELECTION.
    *TOP OF PAGE FOR 1ST SECONDARY LIST
    IF SY-UCOMM = 'IONE'.
    ULINE.
    FORMAT COLOR 1.
    WRITE : 'SALES ORDER DETAILS'.
    ULINE.
    FORMAT COLOR 1 OFF.
    FORMAT COLOR 3.
    WRITE : 1 SY-VLINE,
    3 'CUSTOMER NO.',
    16 SY-VLINE,
    18 'SALES ORDER NO.',
    40 SY-VLINE,
    42 'DATE',
    60 SY-VLINE,
    62 'CREATOR',
    85 SY-VLINE,
    87 'DOC DATE',
    103 SY-VLINE.
    ULINE.
    ENDIF.
    FORMAT COLOR 3 OFF.
    *TOP OF PAGE FOR 2ND SECONDARY LIST
    IF SY-UCOMM = 'ITWO'.
    ULINE.
    FORMAT COLOR 1.
    WRITE : 'ITEM DETAILS'.
    ULINE.
    FORMAT COLOR 1 OFF.
    FORMAT COLOR 3.
    WRITE : 1 SY-VLINE,
    3 'SALES ORDER NO.',
    40 SY-VLINE,
    42 'SALES ITEM NO.',
    60 SY-VLINE,
    62 'ORDER QUANTITY',
    103 SY-VLINE.
    ULINE.
    ENDIF.
    FORMAT COLOR 3 OFF.
    *END OF PAGE
    END-OF-PAGE.
    ULINE.
    WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
    SY-PAGNO.
    SKIP.
    *& Form SALES_ORD
    *& FIRST SECONDARY LIST FORM
    FORM SALES_ORD .
    SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
    (VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
    FROM VBAK
    WHERE KUNNR = KNA1-KUNNR.
    WRITE:/1 SY-VLINE,
    VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
    16 SY-VLINE,
    VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
    40 SY-VLINE,
    VBAK-ERDAT UNDER 'DATE',
    60 SY-VLINE,
    VBAK-ERNAM UNDER 'CREATOR',
    85 SY-VLINE,
    VBAK-AUDAT UNDER 'DOC DATE',
    103 SY-VLINE.
    HIDE : VBAK-VBELN.
    ENDSELECT.
    ULINE.
    ENDFORM. " SALES_ORD
    *& Form ITEM_DET
    *& SECOND SECONDARY LIST FORM
    FORM ITEM_DET .
    SELECT VBELN POSNR KWMENG INTO
    (VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
    FROM VBAP
    WHERE VBELN = VBAK-VBELN.
    WRITE : /1 SY-VLINE,
    VBAP-VBELN UNDER 'SALES ORDER NO.',
    40 SY-VLINE,
    VBAP-POSNR UNDER 'SALES ITEM NO.',
    60 SY-VLINE,
    VBAP-KWMENG UNDER 'ORDER QUANTITY',
    103 SY-VLINE.
    ENDSELECT.
    ULINE.
    ENDFORM. " ITEM_DET
    REPORT demo_list_at_pf.
    START-OF-SELECTION.
    WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
    AT pf5.
    PERFORM out.
    AT pf6.
    PERFORM out.
    AT pf7.
    PERFORM out.
    AT pf8.
    PERFORM out.
    FORM out.
    WRITE: 'Secondary List by PF-Key Selection',
    / 'SY-LSIND =', sy-lsind,
    / 'SY-UCOMM =', sy-ucomm.
    ENDFORM.
    After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
    Secondary List by PF-Key Selection
    SY-LSIND = 14
    SY-UCOMM = PF06
    Example for AT USER-COMMAND.
    REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
    START-OF-SELECTION.
    WRITE: 'Basic List',
    / 'SY-LSIND:', sy-lsind.
    TOP-OF-PAGE.
    WRITE 'Top-of-Page'.
    ULINE.
    TOP-OF-PAGE DURING LINE-SELECTION.
    CASE sy-pfkey.
    WHEN 'TEST'.
    WRITE 'Self-defined GUI for Function Codes'.
    ULINE.
    ENDCASE.
    AT LINE-SELECTION.
    SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
    PERFORM out.
    sy-lsind = sy-lsind - 1.
    AT USER-COMMAND.
    CASE sy-ucomm.
    WHEN 'FC1'.
    PERFORM out.
    WRITE / 'Button FUN 1 was pressed'.
    WHEN 'FC2'.
    PERFORM out.
    WRITE / 'Button FUN 2 was pressed'.
    WHEN 'FC3'.
    PERFORM out.
    WRITE / 'Button FUN 3 was pressed'.
    WHEN 'FC4'.
    PERFORM out.
    WRITE / 'Button FUN 4 was pressed'.
    WHEN 'FC5'.
    PERFORM out.
    WRITE / 'Button FUN 5 was pressed'.
    ENDCASE.
    sy-lsind = sy-lsind - 1.
    FORM out.
    WRITE: 'Secondary List',
    / 'SY-LSIND:', sy-lsind,
    / 'SY-PFKEY:', sy-pfkey.
    ENDFORM.
    When you run the program, the system displays the following basic list with a the page header defined in the program:
    You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
    Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
    For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
    Regards
    Anji

  • RRI Reports - Tables

    Hi all,
    I have a list of queries and Web templates. I want to know if there are any RRI Reports built on these queries. Is there any table from which I can fetch this information??
    For e.g.
    I have one XYZ query.
    i need to find if there any RRI report on this XYZ report and if exist then i want to know the settings.
    Looking for a quick reply..
    Thanks in advance.

    Hi,
    Check in SE11 in BI with RSZ* tables.
    Some useful tables for reports
    RSZELTDIR Directory of the reporting component elements
    RSZELTTXT Texts of reporting component elements
    RSZELTXREF Directory of query element references
    RSRREPDIR Directory of all reports (Query GENUNIID)
    RSZCOMPDIR Directory of reporting components
    RSZRANGE Selection specification for an element
    RSZSELECT Selection properties of an element
    RSZELTDIR Directory of the reporting component elements
    RSZCOMPIC Assignment reuseable component <-> InfoCube
    RSZELTPRIO Priorities with element collisions
    RSZELTPROP Element properties (settings)
    RSZELTATTR Attribute selection per dimension element
    RSZCALC Definition of a formula element
    RSZCEL Query Designer: Directory of Cells
    RSZGLOBV Global Variables in Reporting
    Thanks
    Reddy

  • RRI reports

    What are the Tcodes used to create RRI reports?
    Thanks..

    Hi,
    T/code - RSBBS
    If you want to check in the table, please find the table : RSBBSCUBEMAPPING
    Thanks
    PT

  • Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

    Hi !
    Sir I have some questions regarding word report generation using(C language in labwindows) Please.
    1.How can i add border to a word page?.
    2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
    3.How can i fill a cell of word report table withe the data type other than "character"?.
    And sir one question about use of timer in cvi labwindows please.
    Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
    Regards
    Imran
    Pakistan
    Solved!
    Go to Solution.

    Hello sir!
    Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is  involved i,m just trying to achieve minimum time interval of 1millisecond.
    Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
    And sir also waiting for your kind reply regarding word report generation.
    Thanks.
    Imran.
    Attachments:
    screen_shot_rigistry.docx ‏65 KB

  • Query regarding Crystal Reports Server

    Hi,
    I am new to Crystal Reports.
    I have created a couple of .rpt files using CR2008 and I am loading these report files in my aspx pages using CrystalReportViewer control.
    I am planning to host my webApp on IIS in production environment. Maximum simultaneous/concurrent connections to my reports would be 1 or 2.
    My question is:
    1. Do I need Crystal Reports Server in this scenario?
    2. In future if the number of concurrent users to report increases then do I need to go for Crystal Reports Server? Will just buying and installing the Crystal reports server on production server work? or will I have to do some configuration or some other changes in the existing deployed reports? OR Will I have to deploy my existing reports on Crystal Report Server again?
    Any help will be highly appreciated.
    Thanks in advance,
    Manish

    Manish, please do not cross post:
    Query regarding Crystal Reports Server
    See the [Rules of Engagement|http://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] for more details.
    Marking this thread as answered and locking...
    - Ludek

  • Regarding RRI

    Hi All,
    We have to create Jump targets using RRIs. Before that Iw ant to know a few details about it.
    1. What are the main advantages of using RRIs in performance as well as in reporting?
    2. Are there any disadvantages of using RRIs?
    3. We can even go for VB scripts and use buttons to navigate to other reports or transactions instead of using RRIs. What will be the difference.
    Your information will be helpful to us.
    Regards
    YJ

    Well Jayanth,
          Using RRI has no drawbacks. The same functionality can be achieved using VB script also. The RRI is a feature provided by SAP and it gives the same result in every client port. The VB script is not created in BW server but should last in Web Server or anyother transaction server. Another thing is the OLAP functionality which brings the results easily from the Cache unlike VB script where we should write code to connect to OLAP server every time. The no of round trips cannot be less in this case.
    I hope this will help you.

  • RRI (Report Report Interface) with ABAP Sender program

    I need to call a Report Writer report from a bespoke ABAP program. I can call transaction START_REPORT to do this, but I wondered if the Report-Report Interface can be used here.
    Has anyone ever programmed a direct call to the RRI interface in ABAP?

    Hi Robin
    I know the answer comes late but you might find my wiki posting helpful:
    https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP+Report-Report-Interface
    Regards,
    Marc
    SAP NetWeaver RIG

  • RRI (Report to Report Interface)

    Hi all
    i search in forum and i got a ans., but i'm not able to understand this., what is reporting to report inter face(RRI)
    t-code RSBBS., when do we use., can u pls explain me this one and as wel give on scenario Can u pls give brief and
    step by step scenario
    Kind

    Hi krisna,
                   Report-To-Report Interface is used to navigate from One Report To Another Report. Say for example Your Manager wants to view Yearly report(YTD) which gives sales for Jan, Feb, Mar etc.... he aswell wants to view detailed monthly report for any month say for march..... by right clicking on YTD report he should get Monthly(MTD) report.....so this can be achived by RRI.
    In RSBBS you will have to assign the Source query(in this case it is YTD report) and Target query(in this case it is MTD report). Means the user is able to view YTD and MTD at same instance. Its just like drilldown between reports. Let me know if u have any doubts?
    Regards,
    Vishnu.

  • URGENT: - REGARDING ALV REPORT

    hi,
        i had made dis report in ALV and i want to display d heading format as follows:-
            NAME:- TEST PROGRAM
            date: - 21.05.2007
            time:- 1:30:23 am
    moreover i want to see the print perview of it but it is giving runtime error.
    plz help me in solving dis problem and he or she will be definately rewarded..
    *& Report  ZMFTEST5
    REPORT  ZMFTEST5 no standard page heading LINE-SIZE 310.
    TABLES : VBAK,ABAP,VBEP,VBKD,MARA,KNA1,MAKT.
    *Varriable declaration.
    TYPE-POOLS SLIS.
    DATA : POS TYPE I.
    DATA REPID LIKE SY-REPID.
    DATA : F1 TYPE SLIS_T_FIELDCAT_ALV,
    F2 TYPE SLIS_FIELDCAT_ALV,
    L_LAYOUT TYPE SLIS_LAYOUT_ALV.
    DATA L_POS TYPE I VALUE 1. "position of the column
    DATA GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    DATA: GT_EVENTS TYPE SLIS_T_EVENT,
    FS_EVENTCAT LIKE LINE OF GT_EVENTs.
    DATA : T_HEADING TYPE slis_t_listheader.
    INTERNAL TABLE FOR SALES ORDER *****************
    DATA : BEGIN OF ITSO OCCURS 0,
    VBELN LIKE VBAK-VBELN,
    ERDAT LIKE VBAK-ERDAT,
    BSTNK LIKE VBAK-BSTNK,
    KUNNR LIKE VBAK-KUNNR,
    MATNR LIKE VBAP-MATNR,
    POSNR LIKE VBAP-POSNR,
    WMENG LIKE VBEP-WMENG,
    NTGEW LIKE MARA-NTGEW,
    BRGEW LIKE MARA-BRGEW,
    GEWEI LIKE MARA-GEWEI,
    SPART LIKE VBAK-SPART,
    BMENG LIKE VBEP-BMENG,
    EDATU LIKE VBEP-EDATU,
    BSTKD LIKE VBKD-BSTKD,
    WERKS LIKE VBAP-WERKS,
    MEINS LIKE MARA-MEINS,
    KWMENG LIKE VBAP-KWMENG,
    KLMENG LIKE VBAP-KLMENG,
    BALQTY LIKE VBAP-KLMENG,
    SOGWT LIKE MARA-BRGEW,
    SONWT LIKE MARA-BRGEW,
    SINWT LIKE MARA-BRGEW,
    BALGWT LIKE MARA-BRGEW,
    BALNWT LIKE MARA-BRGEW,
    DISPNWT LIKE MARA-BRGEW,
    PARTYNAME LIKE KNA1-NAME1,
    ITEMDESC LIKE MAKT-MAKTX,
    STATUS TYPE C,
    END OF ITSO.
    DATA:B_QTY TYPE P LENGTH 7 DECIMALS 3.
    ***********PARAMETERS***************
    PARAMETERS : PLANT LIKE VBAP-WERKS OBLIGATORY.
    *********SELECTION SCREEN OPTIONS*********
    SELECT-OPTIONS : SO_ORD FOR VBAK-VBELN,
    SO_PARTY FOR VBAK-KUNNR,
    IT_M FOR MARA-MATNR,
    DIV FOR VBAK-SPART,
    SO_DATE FOR VBAK-ERDAT,
    S_DATE FOR VBEP-EDATU.
    START-OF-SELECTION.
    SELECT DISTINCT A~VBELN A~ERDAT A~BSTNK A~KUNNR B~SPART B~MATNR B~POSNR B~WERKS B~KWMENG B~KBMENG C~NTGEW C~BRGEW C~GEWEI D~WMENG D~BMENG D~EDATU D~VBELN
    FROM VBAK AS A INNER JOIN VBAP AS B ON B~VBELN = A~VBELN
    INNER JOIN MARA AS C ON C~MATNR = B~MATNR
    INNER JOIN VBEP AS D ON D~WMENG > 0 AND D~VBELN = A~VBELN AND D~POSNR = B~POSNR
    INTO CORRESPONDING FIELDS OF TABLE ITSO
    WHERE A~VBELN IN SO_ORD AND A~KUNNR IN SO_PARTY AND B~SPART IN DIV AND A~ERDAT IN SO_DATE AND D~EDATU IN S_DATE AND B~MATNR IN IT_M AND B~WERKS = PLANT.
    IF SY-SUBRC <> 0.
    MESSAGE E899(M3) WITH 'No records'.
    ENDIF.
    DATA : V_NETWT LIKE MARA-NTGEW,
           V_GRWT LIKE MARA-NTGEW,
           V_SOSTAT TYPE C.
    LOOP AT ITSO.
      if ITSO-bmeng = 0.
        V_SOSTAT = 'A'.
      ELSEIF ITSO-WMENG <> ITSO-BMENG.
        V_SOSTAT = 'B'.
      ELSE.
        V_SOSTAT = 'C'.
      ENDIF.
      IF ITSO-GEWEI = 'G'.
        V_NETWT = ITSO-NTGEW / 1000.
        V_GRWT = ITSO-BRGEW / 1000.
      ELSEIF ITSO-GEWEI = 'KG'.
        V_NETWT = ITSO-NTGEW.
        V_GRWT = ITSO-BRGEW.
      ELSEIF ITSO-GEWEI = 'TO'.
        V_NETWT = ITSO-NTGEW * 1000.
        V_GRWT = ITSO-BRGEW * 1000.
      ENDIF.
      ITSO-STATUS = V_SOSTAT.
      ITSO-SOGWT = V_GRWT * ITSO-WMENG / 1000.
      ITSO-SONWT = V_NETWT * ITSO-WMENG / 1000.
      ITSO-SINWT = V_GRWT * ITSO-BMENG / 1000.
      ITSO-BALGWT = V_GRWT * ( ITSO-WMENG - ITSO-BMENG )  / 1000.
      ITSO-BALNWT = V_NETWT * ( ITSO-WMENG - ITSO-BMENG )  / 1000.
      ITSO-DISPNWT = V_NETWT * ITSO-BMENG  / 1000.
      ITSO-BALQTY = ITSO-WMENG - ITSO-BMENG.
      SELECT SINGLE NAME1 FROM KNA1 INTO ITSO-PARTYNAME WHERE KUNNR = ITSO-KUNNR.
      SELECT SINGLE MAKTX FROM MAKT INTO ITSO-ITEMDESC WHERE MATNR = ITSO-MATNR.
      MODIFY ITSO.
    ENDLOOP.
    perform f_build_eventcat.
    PERFORM LAYOUT using t_heading.
    END-OF-SELECTION.
    FORM LAYOUT using t_heading  type slis_t_listheader.
    data : t_event    type slis_t_event.
    PERFORM FCAT USING 'WERKS'     'ITSO' '' 'PLANT '               'WERKS'     'VBAP' ''.
    PERFORM FCAT USING 'VBELN'     'ITSO' '' 'SO NO. '              'VBELN'     'VBAK' ''.
    PERFORM FCAT USING 'ERDAT'     'ITSO' '' 'S.O.DATE'             'ERDAT'     'VBAK' ''.
    PERFORM FCAT USING 'BSTNK'     'ITSO' '' 'P.O.N.O.'             'BSTNK'     'VBAK' ''.
    PERFORM FCAT USING 'KUNNR'     'ITSO' '' 'PARTY '               'KUNNR'     'VBAP' ''.
    PERFORM FCAT USING 'PARTYNAME' 'ITSO' '' 'PARTY DESCRIPTION'    'PARTYNAME' ''     ''.
    PERFORM FCAT USING 'ITEMDESC'  'ITSO' '' 'MATERIAL DESCRIPTION' 'ITEMDESC'  ''     ''.
    PERFORM FCAT USING 'MATNR'     'ITSO' '' 'MAT.NO. '             'MATNR'     'MARA' ''.
    PERFORM FCAT USING 'POSNR'     'ITSO' '' 'LINE.ITEM'            'POSNR'     'VBAP' ''.
    PERFORM FCAT USING 'WMENG'     'ITSO' '' 'S.O.QTY'              'WMENG'     'VBEP' '' .
    PERFORM FCAT USING 'EDATU'     'ITSO' '' 'SCH.DATE'             'EDATU'     'VBEP' ''.
    PERFORM FCAT USING 'SONWT'     'ITSO' '' 'S.O.NWT '             'P'         ''     ''.
    PERFORM FCAT USING 'SOGWT'     'ITSO' '' 'S.O.GWT '             'P'         ''     ''.
    PERFORM FCAT USING 'SPART'     'ITSO' '' 'DIV    '              'SPART'     'VBAP' ''.
    PERFORM FCAT USING 'BMENG'     'ITSO' '' 'DISP.QTY'             'BMENG'     'VBEP' ''.
    PERFORM FCAT USING 'DISPNWT'   'ITSO' '' 'DISP.NT.WT '          'P'         ''     ''.
    PERFORM FCAT USING 'BALQTY'    'ITSO' '' 'BAL.QTY.'             'P'         ''     ''.
    PERFORM FCAT USING 'BALNWT'    'ITSO' '' 'BAL.NT.WT '           'P'         ''     ''.
    PERFORM FCAT USING 'BALGWT'    'ITSO' '' 'BAL.GR.WT '           'P'         ''     ''.
    PERFORM FCAT USING 'STATUS'    'ITSO' '' 'STATUS'               'STATUS'    ''     ''.
    refresh t_event.
    *perform set_top_page_heading using t_heading t_event.
    REPID = SY-REPID.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                =
      I_BUFFER_ACTIVE                   = ' '
       I_CALLBACK_PROGRAM                = REPID
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
       I_CALLBACK_TOP_OF_PAGE            = ' '
      I_CALLBACK
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
      IT_FIELDCAT                       = F1
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         = GT_EVENTS[]
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IT_ALV_GRAPHICS                   =
      IT_ADD_FIELDCAT                   =
      IT_HYPERLINK                      =
      I_HTML_HEIGHT_TOP                 =
      I_HTML_HEIGHT_END                 =
      IT_EXCEPT_QINFO                   =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
    TABLES
       T_OUTTAB                          = ITSO
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
    ENDFORM. " LAYOUT
    *& Form FCAT
    FORM FCAT USING P_FIELD P_TABLE P_SUM P_TEXT P_RFIELD P_RTABLE P_DISP.
    ADD 1 TO POS.
    F2-COL_POS = POS.
    F2-FIELDNAME = P_FIELD.
    F2-TABNAME = P_TABLE.
    F2-SELTEXT_L = P_TEXT.
    F2-REF_FIELDNAME = P_RFIELD.
    F2-REF_TABNAME = P_RTABLE.
    F2-DO_SUM = P_SUM.
    F2-NO_OUT = P_DISP.
    APPEND F2 TO F1.
    CLEAR F2.
    ENDFORM. " FCAT
    FORM F_BUILD_EVENTCAT .
    CLEAR: GT_EVENTS. REFRESH: GT_EVENTS.
    CLEAR: FS_EVENTCAT.
    FS_EVENTCAT-NAME = 'TOP_OF_PAGE'.
    FS_EVENTCAT-FORM = 'F_REPORT_HEADER_ALV'.
    APPEND FS_EVENTCAT TO GT_EVENTS.
    CLEAR: FS_EVENTCAT.
    FS_EVENTCAT-NAME = 'END_OF_LIST'.
    FS_EVENTCAT-FORM = 'F_WRITE_SUMMARY'.
    APPEND FS_EVENTCAT TO GT_EVENTS.
    ENDFORM.
    *FORM F_REPORT_HEADER_ALV.
    *CALL FUNCTION 'Z_HEAD_PRINT'
    EXPORTING
    WRITE: / TITLE1 = 'XYZ Limited'
    TITLE2 = 'Sales Order Report'
    TITLE3 = 'Created on '
    COLOR = 'X'.
    *ENDFORM.
    FORM F_WRITE_SUMMARY .
    write:/ 'Welcome to XYZ Limited'.
    write:/ 'This is a test program to display Report in ALV Format'.
    ENDFORM.
    *&      Form  set_top_page_heading
          text
         -->P_T_HEADING  text
    *form set_top_page_heading  using    t_heading
                                       t_events  type slis_t_event.
    *data: x_heading type slis_listheader,
         x_event   type line of slis_t_event.
    Report title
    clear t_heading[].
    clear x_heading.
    x_heading-typ = 'H'.
    x_heading-info = ''(001).
    append x_heading to t_heading.
    t_heading-info = 'TEST'.
    t_heading-typ = 'H'.
    Program name
    clear x_heading.
    x_heading-typ = 'S'.
    x_heading-key = 'Program: '.
    x_heading-info = sy-repid.
    append x_heading to t_heading.
    User who is running the report
    clear x_heading.
    x_heading-typ = 'S'.
    x_heading-key = 'User: '.
    x_heading-info = sy-uname.
    append x_heading to t_heading.
    Date of execution
    clear x_heading.
    x_heading-typ = 'S'.
    x_heading-key = 'Date: '.
    write sy-datum to x_heading-info.
    append x_heading to t_heading.
    Time of execution
    clear x_heading.
    x_heading-typ = 'S'.
    x_heading-key = 'Time: '.
    write sy-uzeit to x_heading-info.
    append x_heading to t_heading.
    Top of page event
    x_event-name = slis_ev_top_of_page.
    x_event-form = 'TOP_OF_PAGE'.
    append x_event to t_events.
    *endform.                    " set_top_page_heading

    Hi,
    i had change ur code just copy this and try,i hope it will work.
    REPORT ZMFTEST5 no standard page heading LINE-SIZE 310.
    TABLES : VBAK,ABAP,VBEP,VBKD,MARA,KNA1,MAKT.
    *Varriable declaration.
    TYPE-POOLS SLIS.
    DATA : POS TYPE I.
    DATA REPID LIKE SY-REPID.
    ****************CHANGES**************
    DATA : FDATE TYPE STRING,
           FTIME TYPE STRING,
           FNAME TYPE STRING.
    ****************CHANGES**************
    DATA : F1 TYPE SLIS_T_FIELDCAT_ALV,
    F2 TYPE SLIS_FIELDCAT_ALV,
    L_LAYOUT TYPE SLIS_LAYOUT_ALV.
    DATA L_POS TYPE I VALUE 1. "position of the column
    DATA GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    DATA: GT_EVENTS TYPE SLIS_T_EVENT,
    FS_EVENTCAT LIKE LINE OF GT_EVENTs.
    DATA : T_HEADING TYPE slis_t_listheader.
    INTERNAL TABLE FOR SALES ORDER *****************
    DATA : BEGIN OF ITSO OCCURS 0,
    VBELN LIKE VBAK-VBELN,
    ERDAT LIKE VBAK-ERDAT,
    BSTNK LIKE VBAK-BSTNK,
    KUNNR LIKE VBAK-KUNNR,
    MATNR LIKE VBAP-MATNR,
    POSNR LIKE VBAP-POSNR,
    WMENG LIKE VBEP-WMENG,
    NTGEW LIKE MARA-NTGEW,
    BRGEW LIKE MARA-BRGEW,
    GEWEI LIKE MARA-GEWEI,
    SPART LIKE VBAK-SPART,
    BMENG LIKE VBEP-BMENG,
    EDATU LIKE VBEP-EDATU,
    BSTKD LIKE VBKD-BSTKD,
    WERKS LIKE VBAP-WERKS,
    MEINS LIKE MARA-MEINS,
    KWMENG LIKE VBAP-KWMENG,
    KLMENG LIKE VBAP-KLMENG,
    BALQTY LIKE VBAP-KLMENG,
    SOGWT LIKE MARA-BRGEW,
    SONWT LIKE MARA-BRGEW,
    SINWT LIKE MARA-BRGEW,
    BALGWT LIKE MARA-BRGEW,
    BALNWT LIKE MARA-BRGEW,
    DISPNWT LIKE MARA-BRGEW,
    PARTYNAME LIKE KNA1-NAME1,
    ITEMDESC LIKE MAKT-MAKTX,
    STATUS TYPE C,
    END OF ITSO.
    DATA:B_QTY TYPE P LENGTH 7 DECIMALS 3.
    ***********PARAMETERS***************
    PARAMETERS : PLANT LIKE VBAP-WERKS OBLIGATORY.
    *********SELECTION SCREEN OPTIONS*********
    SELECT-OPTIONS : SO_ORD FOR VBAK-VBELN,
    SO_PARTY FOR VBAK-KUNNR,
    IT_M FOR MARA-MATNR,
    DIV FOR VBAK-SPART,
    SO_DATE FOR VBAK-ERDAT,
    S_DATE FOR VBEP-EDATU.
    START-OF-SELECTION.
    SELECT DISTINCT A~VBELN A~ERDAT A~BSTNK A~KUNNR B~SPART B~MATNR B~POSNR B~WERKS B~KWMENG B~KBMENG C~NTGEW C~BRGEW C~GEWEI D~WMENG D~BMENG D~EDATU D~VBELN
    FROM VBAK AS A INNER JOIN VBAP AS B ON B~VBELN = A~VBELN
    INNER JOIN MARA AS C ON C~MATNR = B~MATNR
    INNER JOIN VBEP AS D ON D~WMENG > 0 AND D~VBELN = A~VBELN AND D~POSNR = B~POSNR
    INTO CORRESPONDING FIELDS OF TABLE ITSO
    WHERE A~VBELN IN SO_ORD AND A~KUNNR IN SO_PARTY AND B~SPART IN DIV AND A~ERDAT IN SO_DATE AND D~EDATU IN S_DATE AND B~MATNR IN IT_M AND B~WERKS = PLANT.
    IF SY-SUBRC <> 0.
    MESSAGE E899(M3) WITH 'No records'.
    ENDIF.
    DATA : V_NETWT LIKE MARA-NTGEW,
    V_GRWT LIKE MARA-NTGEW,
    V_SOSTAT TYPE C.
    LOOP AT ITSO.
    if ITSO-bmeng = 0.
    V_SOSTAT = 'A'.
    ELSEIF ITSO-WMENG <> ITSO-BMENG.
    V_SOSTAT = 'B'.
    ELSE.
    V_SOSTAT = 'C'.
    ENDIF.
    IF ITSO-GEWEI = 'G'.
    V_NETWT = ITSO-NTGEW / 1000.
    V_GRWT = ITSO-BRGEW / 1000.
    ELSEIF ITSO-GEWEI = 'KG'.
    V_NETWT = ITSO-NTGEW.
    V_GRWT = ITSO-BRGEW.
    ELSEIF ITSO-GEWEI = 'TO'.
    V_NETWT = ITSO-NTGEW * 1000.
    V_GRWT = ITSO-BRGEW * 1000.
    ENDIF.
    ITSO-STATUS = V_SOSTAT.
    ITSO-SOGWT = V_GRWT * ITSO-WMENG / 1000.
    ITSO-SONWT = V_NETWT * ITSO-WMENG / 1000.
    ITSO-SINWT = V_GRWT * ITSO-BMENG / 1000.
    ITSO-BALGWT = V_GRWT * ( ITSO-WMENG - ITSO-BMENG ) / 1000.
    ITSO-BALNWT = V_NETWT * ( ITSO-WMENG - ITSO-BMENG ) / 1000.
    ITSO-DISPNWT = V_NETWT * ITSO-BMENG / 1000.
    ITSO-BALQTY = ITSO-WMENG - ITSO-BMENG.
    SELECT SINGLE NAME1 FROM KNA1 INTO ITSO-PARTYNAME WHERE KUNNR = ITSO-KUNNR.
    SELECT SINGLE MAKTX FROM MAKT INTO ITSO-ITEMDESC WHERE MATNR = ITSO-MATNR.
    MODIFY ITSO.
    ENDLOOP.
    perform f_build_eventcat.
    PERFORM LAYOUT using t_heading.
    END-OF-SELECTION.
    FORM LAYOUT using t_heading type slis_t_listheader.
    data : t_event type slis_t_event.
    PERFORM FCAT USING 'WERKS' 'ITSO' '' 'PLANT ' 'WERKS' 'VBAP' ''.
    PERFORM FCAT USING 'VBELN' 'ITSO' '' 'SO NO. ' 'VBELN' 'VBAK' ''.
    PERFORM FCAT USING 'ERDAT' 'ITSO' '' 'S.O.DATE' 'ERDAT' 'VBAK' ''.
    PERFORM FCAT USING 'BSTNK' 'ITSO' '' 'P.O.N.O.' 'BSTNK' 'VBAK' ''.
    PERFORM FCAT USING 'KUNNR' 'ITSO' '' 'PARTY ' 'KUNNR' 'VBAP' ''.
    PERFORM FCAT USING 'PARTYNAME' 'ITSO' '' 'PARTY DESCRIPTION' 'PARTYNAME' '' ''.
    PERFORM FCAT USING 'ITEMDESC' 'ITSO' '' 'MATERIAL DESCRIPTION' 'ITEMDESC' '' ''.
    PERFORM FCAT USING 'MATNR' 'ITSO' '' 'MAT.NO. ' 'MATNR' 'MARA' ''.
    PERFORM FCAT USING 'POSNR' 'ITSO' '' 'LINE.ITEM' 'POSNR' 'VBAP' ''.
    PERFORM FCAT USING 'WMENG' 'ITSO' '' 'S.O.QTY' 'WMENG' 'VBEP' '' .
    PERFORM FCAT USING 'EDATU' 'ITSO' '' 'SCH.DATE' 'EDATU' 'VBEP' ''.
    PERFORM FCAT USING 'SONWT' 'ITSO' '' 'S.O.NWT ' 'P' '' ''.
    PERFORM FCAT USING 'SOGWT' 'ITSO' '' 'S.O.GWT ' 'P' '' ''.
    PERFORM FCAT USING 'SPART' 'ITSO' '' 'DIV ' 'SPART' 'VBAP' ''.
    PERFORM FCAT USING 'BMENG' 'ITSO' '' 'DISP.QTY' 'BMENG' 'VBEP' ''.
    PERFORM FCAT USING 'DISPNWT' 'ITSO' '' 'DISP.NT.WT ' 'P' '' ''.
    PERFORM FCAT USING 'BALQTY' 'ITSO' '' 'BAL.QTY.' 'P' '' ''.
    PERFORM FCAT USING 'BALNWT' 'ITSO' '' 'BAL.NT.WT ' 'P' '' ''.
    PERFORM FCAT USING 'BALGWT' 'ITSO' '' 'BAL.GR.WT ' 'P' '' ''.
    PERFORM FCAT USING 'STATUS' 'ITSO' '' 'STATUS' 'STATUS' '' ''.
    refresh t_event.
    *perform set_top_page_heading using t_heading t_event.
    REPID = SY-REPID.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER =
    I_BUFFER_ACTIVE = ' '
    I_CALLBACK_PROGRAM = REPID
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = ' '
    I_CALLBACK_TOP_OF_PAGE = ' '
    I_CALLBACK
    I_CALLBACK_HTML_TOP_OF_PAGE = 'TOP'
    I_CALLBACK_HTML_END_OF_LIST = ' '
    I_STRUCTURE_NAME =
    I_BACKGROUND_ID = ' '
    I_GRID_TITLE =
    I_GRID_SETTINGS =
    IS_LAYOUT =
    IT_FIELDCAT = F1
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    I_SAVE = ' '
    IS_VARIANT =
    IT_EVENTS = GT_EVENTS[]
    IT_EVENT_EXIT =
    IS_PRINT =
    IS_REPREP_ID =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    IT_ALV_GRAPHICS =
    IT_ADD_FIELDCAT =
    IT_HYPERLINK =
    I_HTML_HEIGHT_TOP =
    I_HTML_HEIGHT_END =
    IT_EXCEPT_QINFO =
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    TABLES
    T_OUTTAB = ITSO
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    ENDFORM. " LAYOUT
    *& Form FCAT
    FORM FCAT USING P_FIELD P_TABLE P_SUM P_TEXT P_RFIELD P_RTABLE P_DISP.
    ADD 1 TO POS.
    F2-COL_POS = POS.
    F2-FIELDNAME = P_FIELD.
    F2-TABNAME = P_TABLE.
    F2-SELTEXT_L = P_TEXT.
    F2-REF_FIELDNAME = P_RFIELD.
    F2-REF_TABNAME = P_RTABLE.
    F2-DO_SUM = P_SUM.
    F2-NO_OUT = P_DISP.
    APPEND F2 TO F1.
    CLEAR F2.
    ENDFORM. " FCAT
    FORM F_BUILD_EVENTCAT .
    CLEAR: GT_EVENTS. REFRESH: GT_EVENTS.
    CLEAR: FS_EVENTCAT.
    FS_EVENTCAT-NAME = 'TOP_OF_PAGE'.
    FS_EVENTCAT-FORM = 'F_REPORT_HEADER_ALV'.
    APPEND FS_EVENTCAT TO GT_EVENTS.
    CLEAR: FS_EVENTCAT.
    FS_EVENTCAT-NAME = 'END_OF_LIST'.
    FS_EVENTCAT-FORM = 'F_WRITE_SUMMARY'.
    APPEND FS_EVENTCAT TO GT_EVENTS.
    ENDFORM.
    *FORM F_REPORT_HEADER_ALV.
    *CALL FUNCTION 'Z_HEAD_PRINT'
    EXPORTING
    WRITE: / TITLE1 = 'XYZ Limited'
    TITLE2 = 'Sales Order Report'
    TITLE3 = 'Created on '
    COLOR = 'X'.
    *ENDFORM.
    FORM F_WRITE_SUMMARY .
    write:/ 'Welcome to XYZ Limited'.
    write:/ 'This is a test program to display Report in ALV Format'.
    ENDFORM.
    FORM TOP.
      DATA: WT_HEADER TYPE SLIS_T_LISTHEADER,
            WA_HEADER TYPE SLIS_LISTHEADER.
    CONCATENATE 'DATE:-' SY-DATUM INTO FDATE.
    CONCATENATE 'TIME:-' SY-UZEIT INTO FTIME.
    FNAME = 'NAME:- TEST'.
      WA_HEADER-TYP = HEADER.
      WA_HEADER-INFO = FNAME.
      APPEND WA_HEADER TO WT_HEADER.
      CLEAR WA_HEADER.
      WA_HEADER-TYP = HEADER.
      WA_HEADER-INFO = FDATE.
      APPEND WA_HEADER TO WT_HEADER.
      CLEAR WA_HEADER.
      WA_HEADER-TYP = HEADER.
      WA_HEADER-INFO = FTIME.
      APPEND WA_HEADER TO WT_HEADER.
      CLEAR WA_HEADER.
    ENDFORM.                   
    *& Form set_top_page_heading
    text
    -->P_T_HEADING text
    *form set_top_page_heading using t_heading
    t_events type slis_t_event.
    *data: x_heading type slis_listheader,
    x_event type line of slis_t_event.
    Report title
    clear t_heading[].
    clear x_heading.
    x_heading-typ = 'H'.
    x_heading-info = ''(001).
    append x_heading to t_heading.
    t_heading-info = 'TEST'.
    t_heading-typ = 'H'.
    Program name
    clear x_heading.
    x_heading-typ = 'S'.
    x_heading-key = 'Program: '.
    x_heading-info = sy-repid.
    append x_heading to t_heading.
    User who is running the report
    clear x_heading.
    x_heading-typ = 'S'.
    x_heading-key = 'User: '.
    x_heading-info = sy-uname.
    append x_heading to t_heading.
    Date of execution
    clear x_heading.
    x_heading-typ = 'S'.
    x_heading-key = 'Date: '.
    write sy-datum to x_heading-info.
    append x_heading to t_heading.
    Time of execution
    clear x_heading.
    x_heading-typ = 'S'.
    x_heading-key = 'Time: '.
    write sy-uzeit to x_heading-info.
    append x_heading to t_heading.
    Top of page event
    x_event-name = slis_ev_top_of_page.
    x_event-form = 'TOP_OF_PAGE'.
    append x_event to t_events.
    *endform. " set_top_page_heading
    *please do reward points if helpful
    Thanks and Regards,
    S.N.Venkatesh

  • Regarding aging reports

    Hi Experts/Gurus
    I need the standard reports and transaction for customer aging report and vendor aging report.(I need only standard reports not the custom reports)
    Need immediate replies.
    Your answers can be rewarded with good points.
    Regards,
    kumar

    Hello,
    Check the link
    Aging Report for AR
    Vendor Ageing Report ?
    If useful reward.
    Vasanth

  • Regarding the report for vendor stock

    Hello all,
    This is regarding the Subcontracting scenario. We have requirement of transferring the stock of material to Vendor by using 311 Q as the tye child material is in the project stock. In
    However the customer would like to have a report in which we can see the stock provided to vendor  ' Vendorwise or PO wise" .
    Kindly suggest the solution.
    Thanks & regards,
    Sudhir

    Hi
    The stock monitoring for SC stocks at vendor can be done uswing ME2O report.
    If you want to see the total stocks available at vendor then use report MBLB

Maybe you are looking for