Regarding table that shows tcode info

Hi all,
       Is there a table in SAP which shows all the users who used a particular tcode. Can any one suggest me if there is one like that.
   Let me know if any additional information is required.
Thanks in advance.
Ravi Boppana

Hi Ravi,
I think ST03N tcode is used to check the history of transaction usage by the users. I think you will have logs upto 5 months.
You can also go to SUIM and check which users have access to a particular tcode.
Hope this helps.
Regards,
Kiran Kandepalli.

Similar Messages

  • ANYBODY GIVE ME THE TABLE/TABLES THAT CONTAIN TCODE AND DEVELOPMENT CLASS

    ANYBODY GIVE ME THE TABLE/TABLES THAT CONTAIN TCODE AND DEVELOPMENT CLASS

    Hi phani,
                 The table TSTC contains the transaction codes.
    Also the below links provides a lot of info on the Standard SAP Tables.
    http://www.sapdev.co.uk/tables/tables.htm
    Pls reward if useful..
    Thanks,
    Sirisha.

  • Process Chains! is there a table that shows how long a PC works?

    hi all
    I've got many process chains in my system, i need their statistical data about how long they keep working once a day,
    so, do you know a table that keeps the data i need?
    regards,
    Mete

    If you run/receive the Early Watch report, it has some info on Process Chains, a sample of the info pasted below (apologies on some of the alignment).  Also tran ST03 in Expert mode has some Process Chain info as well.
    Main Chain     #Total Subchains     #Total Steps     #Runs     Total Runtime [min]     Avg. Runtime [min]     Med. Runtime [min]     Avg. Proc.Type Runt. [min]
    ZTV_D_LOAD     0     24     4     964     241     236     267
    ZSR_D_ALL_META     18     113     4     740     185     169     111
    ZFM_D_TRAN_METACHAIN     9     63     4     363     91     81     120
    ZPM_D_METACHAIN     6     46     4     328     82     30     83
    FI_DAILY_TRAN_METACHAIN     8     51     4     280     70     68     118
    ZADM_R_RSRV     0     6     1     145     145     145     254
    ZSRMD_WK_META     4     68     1     111     111     111     111
    ZMD_D_METACHAIN     7     93     4     103     26     26     27
    ZTC_D_METACHAIN     3     56     4     72     18     18     18
    ZMM_D_META_2     2     17     4     58     15     8     14
    ZADM_D_METACHAIN     2     16     4     52     13     14     13
    ZFI_12PM_TRAN_XTRA     3     11     7     48     7     8     7
    ZFI_3PM_TRAN_XTRA     6     20     7     45     7     7     7
    ZARS_W_TRAN     0     9     1     40     40     40     39
    ZFI_5PM_TRAN_XTRA_START     12     38     7     37     6     6     6
    ZFI_D_TRAN_ZSLGS_01     0     3     4     34     9     7     9
    ZMM_D_META_1     1     17     4     31     8     7     8
    ZFI_X_ARAPGL_TRAN     6     40     1     30     30     30     47
    ZFI_5AM_TRAN_XTRA_META     9     29     2     28     14     14     14
    ZMD_W_TEXT_PROBLEMS     0     4     1     18     18     18     18

  • Workflow table that shows whether a TS is a background type

    Hi,
    does anyone know the name of the SAP table that tells you whether a workflow task is a foreground or background type?
    Thanks,
    Jerry

    Hi Rose,
    Thank you. The SE11 table description for HRS1201 doesn't reflect what's in the table.
    Regards,
    Jerry

  • Table that shows variants?

    Dear GURUS
    I need to know if there is a table that holds the variants which are used in reports.
    Best Regards
    SP

    > VARID
    > VARIT
    > VARI <- this is the table that holds variant values,
    > but unfortunately they are stored in a cluster and
    > hence not easy to read.
    Could you please open a little bit. about the table VARI / i need to finds variant's values. how to read that table?
    thanks

  • Tables That Show a Specific Field

    Hello,
    The same field is used in many transactions and tables, for example Purchase Groups and Validity Dates.  Can anyone tell me if there is a transaction or table that would tell me what other transactions or tables use a particular field as part of the criteria?
    Thank you in advance.
    Judi

    Press F1 on the field you want to know..
    and you will see a popup, there click the technical information
    tab..
    you will see table , field & data element...
    Double click on Data element..
    it will take you to Next screen..
    there clcik the Where- used List( Three Arrows) CtrlShiftF3..
    you will get the options for tables, transactions , Programs etc..
    Tick what you want to see
    for that  particular field ...
    and execute..
    Thx
    Raju
    Edited by: Manohar Raju on Mar 12, 2008 12:53 PM

  • Cannot Drop Table that Shows in dba_tables

    In my IDE I see two tables that I no longer need. I created them as a test to see the difference between LOGGING vs NOLOGGING. Now I want to drop the tables.
    I issue the command drop table customers_no_logging.
    The system responds with ORA-00942: table or view does not exist.
    However, select table_name from dba_tables returns the table names in question.
    Even in sqlplus I get the same result:
    SQL> select table_name from dba_tables where owner = 'RUB';
    TABLE_NAME
    CUSTOMERS
    INV_ITEM_MASTER
    INV_SITE
    CUSTOMERS_w_log
    CUSTOMERS_no_log
    5 rows selected.
    SQL> drop table CUSTOMERS_no_log;
    drop table CUSTOMERS_no_log
    ERROR at line 1:
    ORA-00942: table or view does not exist
    How can I drop these tables?
    Thanks,
    Gregory

    I was connected as RUB in my IDE and SYS in SQLPlus.
    I have connected as RUB in SQLPlus and tried
    SQL> drop table "RUB.CUSTOMERS_no_log";
    drop table "RUB.CUSTOMERS_no_log"
    ERROR at line 1:
    ORA-00942: table or view does not exist
    Maybe I need to stop and restart the DB?
    Gregory

  • Checkboxes in table that show value

    Hello,
    I have a series of questions that I want the user to be able to answer yes or no by selecting or deselecting a checkbox. I have this working fine now, except when it is loaded again all the checkboxes are unchecked, even though some of my values are 'true'.
    I've tried setting the 'selected' property on the checkbox to a binding of the value in the table, as #{row.answer}, but that did nothing. I got it to work by using a #{row.answer == 'true'}, but then the checkbox became read only, which destroys the purpose.
    Lastly, I tried having two separate checkboxes, one that was selected by default and one that was unselected, then I set the render property to #{row.answer == 'true'} or #{row.answer == false}, respectively. This works the first time I load the page but after I submit or change sections they all show as unselected again.
    How can I get the checkboxes to reflect the current value?
    Thanks,
    -N

    Hi Frank,
    Thanks, that's exactly what I'm looking for.
    I'm getting stuck though and I can't figure out why. I got the sample application to work very easily, but when I try to adapt it to my new project it doesn't show any value for StatusAsBoolean. I tried using the same table even and it remains blank.
    Here's what I've done:
    Created an entity object for the table.
    Created a view object based on the entity and added another attribute (StatusAsBoolean) and uncheck everything, set as type Boolean and Always Updatable.
    Created a new class (SettingsViewRowImpl.java) and used the same code as in the class in the sample file.
    Created a table on the .jsp page.
    One thing I've noticed is that when I make a view object, it creates a SettingsViewImpl.java file. I tried putting the code in there but that crashes the application.
    I hope I'm not frustrating you, I've been trying really hard to get this to work and I'm sure it's a really obvious mistake.
    Thanks

  • Show item info does not show on all files

    I need that "show item info" very much, because it shows, how many sec each of my video clips are. When I have a folder with many video clips in it, about 3/4 shows the item info (sec length of clip) but about 1/4 it does not.
    It would help me a lot to see all. Would there be a way to fix that?
    Dorian

    Before you do this insert your original dvd, then restart holding the c key until the grey apple logo screen appears. When it asks to select language do so. On the next screen select Disk utility from the tools/utilities menu. Select your HD and do a Repair Disk. If errors are indicated and repairs are shown as successful, rerun this until there are no errors indicated. Also do the Repair Permissions option while in this mode.
    After all this restart and see whether all goes well.
    This process will be a lot quicker than a reinstall if it solves the problems.
    Neville

  • Is there a table/report that shows a list of the original tcodes vs tcodes?

    How to I find out the calling tcode of a transaction other than using SE93?
    e.g
    ABUM 's original tcode is AB01.
    Is there a table/report that shows a list of the original tcodes vs tcodes?

    Table TCDCOUPLES gives a list of called tcodes for a particular tcode.
    e.g
    For parameter tcode 1KEF  , called-tcodes are :
    1KE1
    1KEF
    1KEG
    OKKS
    BUT this table does not show which called-tcode is the original tcode.
    Using se93, I see that 1KEG is the original tcode.
    Is there a table that will show only the parameter tcodes vs orginal tcodes?

  • BSP That shows me the entrys of a table in R/3 System

    Hi There,
    i need a simple code...
    I have a table in my R/3 System called. ZRP_DATEN
    What i want is a BSP Page that shows all the Entys in the table..
    Can somebody help here?
    Thanks
    Bjoern

    Hi ,
    Create a BSP application ZBSP_SHOWMAT , Create a BSP page..
    Eventhandler...OnCreate.
    Select * from zrp_daten into table gt_daten .
    Layout:
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content design           = "design2003"
                   controlRendering = "SAP" >
          <htmlb:page title="Show data from teble">
    <htmlb:form id="empconfirm" >
    <htmlb:gridLayout columnSize  = "1"
                              rowSize     = "1"
                              cellSpacing = "10"
                              cellPadding = "2" >
    <htmlb:gridLayoutCell columnIndex = "1"
                                    rowIndex    = "1" >
    <htmlb:tableView id                     = "material"
                                     headerText          = "Materials"
                                     headerVisible       = "true"
                                     design              = "alternating"
                                     visibleRowCount     = "5"
                                     fillUpEmptyRows     = "true"
                                     selectionMode       = "MULTILINEEDIT"
                                     filter              = "SERVER"
                                     emptyTableText      = "No items found for specified search criterion"
                                     table               = "<%= gt_daten %>" />
    </htmlb:gridLayoutCell>
    </htmlb:gridLayout>
    </htmlb:form>
        <htmlb:page>
    </htmlb:content>
    Type Definitions..
    TYPES: tt_daten type table of zrp_daten
    Page Attributes:
    gt_daten TYPE tt_daten
    Search the forum for tutorials
    Regards,
    Anubhav

  • A matrix column that shows a field from a linked table

    Hello,
    I'm creating a custom UI form for a UDO of type document.
    This UDO (say FATHER) has one child table (say CHILD). I show its data in a matrix.
    Every line in CHILD links to a sales order line (RDR1).
    In the matrix I'd like to show:
    A) some columns from CHILD (I succeded)
    B) a linked button column that links to ORDR using CHILD.U_OrderEntry (I succeded)
    C) a column that shows RDR1.DocDueDate (how?)
    D) a linked button column that shows RDR1.ItemCode and links to OITM (how?)
    Something similar is done by B1 in pick list standard form (id 85), for instance.
    Can you help me solving issues C and D?
    I guess I should link my CHILD.U_OrderEntry and U_OrderLine with RDR1.DocEntry and LineNum.
    Many thanks!

    Hi Simone,
    I agree, my explanation was partial.
    When I am creating a new form, I'm basing every single piece of the UI on DataTable (I never use DBDataSource and UserDataSources only for Folders). One for the header, one for each Matrix/grid, etc.
    By doing this, it allows me to have the correct layout and validate the UI with the project manager (or the Customer, when this is me the project manager ).
    Then, I am creating the queries, to extract data from the DB exactly as the previously defined DataTables are expecting these data (so, calculating the LineId from the query...).
    And finally, this is the beauty of the design, DataTables allows to to extract (since 2007PL47?) the data from a DataTable as an xml String and to import it in a different DataTable.
    So, to make the full picture, I have a specific DataTable to execute queries, from which I'm extracting the xml definition to load it in the "UI's DataTable". It ends with a matrix.LoadFromDataSource...
    Definitions are staying as defined, querying and loading is sub-second time (depending on your SQL expertise), layout doesn't flicker...
    If you need an excerpt of code (frankly, I'd prefer you to write it with this "how to"), just ask.
    Regards,
    Eric

  • I'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

    i'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

    Until Bob Timmons gets back to you, first decide what you would like the Express to do. I understand you want it for AirPlay remote speakers, which you can certainly do.
    I am assuming that you are not using an Apple AirPort router; if that's not the case stop here and let me know.
    If your existing router is not an Apple AirPort Base Station, the Express:
    can "join" an existing wireless network as a client, for the sole purpose of streaming music. If that's what you want to do, do not connect it to your router with an Ethernet cable.
    can "extend" an existing wired network to serve as an additional wireless access point, which can also stream music. If that's what you want to do, connect its WAN port to an available LAN port on your router using an Ethernet cable.
    Then, "hard reset" the Express according to the instructions below, and configure it. The prompts should be self-explanatory. If you run into trouble, describe which of the above two configurations you decided upon, and the point at which you're getting the "unexpected problem".
    To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click.  Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

  • HT4111 I just purchased my first iPad (the new one) and a wireless keyboard. Is there a keyboard usage manual available anywhere that shows the functions of the keys? The info that came with the keyboard was very basic and my searches have been unsuccessf

    I just purchased my first iPad (the new one) and a wireless keyboard. Is there a keyboard usage manual available anywhere that shows the functions of the keys? The info that came with the keyboard was very basic and my searches have been unsuccessful.

    If you are using a Bluetooth keyboard on your iPad device, you should take advantage of the keyboard shortcuts for quicker access to copy, cut, paste, undo, redo, and other commands.
    Command + C : Copy Selected Text
    Command + V : Paste
    Command + X: Cut Selected Text
    Command + Z: Undo
    Command + Shift + Z: Redo
    Command + Delete: Delete everything to the left of the cursor on the current line
    Option + Delete: Delete the word to the left of the cursor
    Command + Up Arrow: Go to top of document
    Command + Down Arrow: Go to bottom of document
    Command + Left Arrow: Go to beginning of current line
    Command + Right Arrow: Go to end of current line
    F1: Dim screen
    F2: Brighten screen
    F7: Back one song
    F8: Play/pause song
    F9: Skip song
    F10: Mute
    F11: Decrease volume
    F12: Increase volume
    Eject button: Show or hide onscreen keyboard
     Cheers, Tom

  • I cannot sort my music or  change any info that shows on my iphone.

    I cannot sort my music or  change any info that shows on my iphone.

    Seems like the music never completly downloaded. Try redownloading on computer and sync.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for