Regarding the clusters in HR - ABAP

Hi All,
Anybody is having the documents regarding the clusters. If so can u please share with me?
Thanks & Regards,
Suresh

Hi Suresh,
Go through the following link.You will get a brief knowledge about clusters in HR
www.hrexpertonline.com/downloads/12-04.doc .
Regards,
Deepthi Reddy

Similar Messages

Regarding the operators used in abap oo

hi,
can any one send me the link or else please give in writing the operators used in oo abap. like ->, =>, ?= etc etc. please send me them i didnot find them in many sites that i am going through .
thanks and regards
ibrahim.md

These operators are described in the standard SAP help under ABAP Objects Overview but in particular:
-> is an instance component selector
=> is a static component selector
?= is used for widening casts (casting one object to another)
Thanks,
Pete

Regarding the Authorization in ABAP-HR

Hi all,
I want to know about the Authorizations in the ABAP-HR. If any body is having any material regarding the can you plz share with me...
thanks in advance,
Suresh

Hi Kutam,
Chk these Links....
Can i have the list of infotypes .
abap hr
http://www.asug.com/client_files/Calendar/Upload/HR_STRUCTURAL_AUTHORIZATIONS.ppt
Reward Points if Useful
All the Best
Gokul

Regarding the PPT or documents to give session regarding the HR- ABAP

Hi all,
Well and wish same from you.. Can please share the PPT or documents to give session regarding the HR- ABAP.
Thanks ,
Suresh

Hi ,
Please send to my personal id [email protected].
Thanks in advance..
Suresh.

WD ABAP: Regarding the url

Hi,
I just installed the netwear2004s for ABAP. My intention is to learn webdynpro. I installed this on a different machine. When I tried to execute some demo web dynpro, I am facing an error regarding the url. The url its trying starts with localhost:....., whereas it should be the system number of that system. When I changed 'localhost' to the corresponding system number, I am able to get the screens
How to change to the system number instead of "localhost"?
Thank you in anticipation.
S V Raja

Hi,
after installation, did you carry out the necessary configuration settings? See http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm
Regards, Heidi
PS: See also http://help.sap.com/saphelp_nw2004s/helpdata/en/8c/780741375cf16fe10000000a1550b0/frameset.htm
Message was edited by: Heidi von Geisau

How to log in to the new installed SAP ABAP instance ?

Dear Experts,
In SAP ERP 2005 installation,
I have done central system installation, Now I need to perform postinstallation steps,
Could you please tell me, how to log in to the new installed SAP ABAP instance and do the post installation?
Regards,
Madhavan K

Hi,
Check the list of post installation steps:
http://www.saptechies.com/post-installation-steps-for-ecc-60/
From my point of view basic post installation steps are:
- Installing SAP License (from http://service.sap.com/licensekeys)
- Setup TMS (STMS)
- Import profiles (RZ10)
- Client Copy (SCC*)
- Create users (SU01)
However further many steps are required as per your requirements. Cehck the link for more detailed steps.
Regards,
Srikishan

Any means to print the output from an abap report immediately

Hi,
I would like to know if there are any means to print the output of an abap program immediately. Our user wants to execute the program online and once the result list is displayed on screen, user wants the same list to be printed simultaneously without the need to press the 'Print' button.
Thanks in advance for your help and advises.
Francis

Hi
We can print the list while displaying using NEW-PAGE PRINT ON.
below is the syntax for this.
     NEW-PAGE PRINT ON [NEW-SECTION]
                [<params> | PARAMETERS <pripar>]
                [ARCHIVE PARAMETERS <arcpar>]
                [NO DIALOG].
Regards
Ramanjaneya Reddy.
[email protected]

Specifications for the report regarding the invoiced quantity.

Hi all SAP gurus,
I want to give specifications to the abaper regarding the layout of a report. The details are sales order, materials in it, order quantity, invoiced qty, balance qty and stock against the balance qty.
I want to know the table & field name where the qty is getting updated. Suppose order qty is 20, today i invoice 5 qty. The balance is 15. When i run the report, in the invoiced qty column the system should show 5. Tomorrow i invoice 10 qty, the balance will be 5. When i run the report again, in the invoiced qty column, the system should show 15.
Where is the data stored regarding the updated qty which is already invoiced.
The scenario is MTS. Is it possible to show the exact available qty in the balance qty. column some material may be confirmed for other sales order also.
Regards,
Allabaqsh G. Patil

Hi
Need to understand couple of more things before i tell you the fields as are you considering report Based ON invoice or delivery as you are saying that order quantity is 20 and invoice is 5 , ( do you mean to say delivered quantity is 5)
secondly since this report is for stock are you taking into the account of all the pending orders not yet delivered , partially deliverd.
Hope you understand this as this report could change every minute the order is delivered
And as per my knowledge there is no such table which can give you that information , you need to write a logic which will consider the open orders, partially delivery , and stuff into .....hope i am in Sync with what you are asking
Cheers

What is the next step after ABAP ? Need resources for SAP structure

Hello,
I have learned ABAP and now it is time to use it to write SAP programs. But what is the next step?
From where can I get information about SAP tables to proceed?
I have 2 ABAP books but they only provide the syntax for ABAP. After learning that, I am finding trouble in knowing on which objects/tables to apply it on.
For example, I want to know that when I use the CV01n to create a file, what happens in terms of internal SAP tables?
If I select multiple files in the search result "CV04N" which table should I access to get these selected files?
Basically does anyone know where I can find such resources in order to understand how to proceed in developing SAP application ?
Regards.

Hi HASSAN,
For Learning the Business part of ABAP, (That is what is missing for you i.e the tables and their relations), i would suggest you to take one module at a time.
Like MM(Material management) or SD(Sales and distribution) etc.
Refer this link to know the business part of the SAP:
MM:
http://help.sap.com/saphelp_47x200/helpdata/en/96/df293581dc1f79e10000009b38f889/frameset.htm
SD:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
Regards,
Ravi

How to debug the background job in ABAP

Hi Guys,
Can anyone let me know how to debug the background job in ABAP.
Thanks in advance
peter

Hi,
Goto SM37 and see the log if any is there and based on that you can check the code.
you can't debug background job.
Create a Variant for the Program and
Schedule JOB in background:
Go to SM36 create a Job
enter Program and Variant for that program in STEP..
click on Start Condition
Click on DATE and TIME enter date scheduled Start and END times
click on Period Values
Click on HOURLY/WEEKLY etc
CLick on RESTRICTIONS also to use further criteria.
so your job will be scheduled and run as per your requirement.
and in SM37 Transaction check the status of that JOB
Check this link for scheduling jobs..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
Check this
http://jplamontre.free.fr/SAP/Debug%20background%20process.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/abap+debugger&
Regards,
Padmam.

How is the interface between the Java Stack and ABAP stack is achieved?

How is the interface between the Java Stack and ABAP stack is achieved?..Please send me the answer to [email protected]

Hi,
By interface, I assume you mean the connection between the ABAP and the Java stacks in a double stack system.
The connection from Java to ABAP is through JCo connections defined in the WebDynpro section of the J2EE start page. So Java to ABAP requests are processed through JCo.
The connection from ABAP to Java is through RFC connections defined in TA SM59. The ABAP to Java requests are processed through RFC.
Refer https://dsd.esco-salt.com/StartPage/documents/integration/3.html for detailed explanation.
The UME can be maintained in either ABAP or in JAVA depending on the persistence.
Refer: http://help.sap.com/saphelp_nw70/helpdata/en/5b/5d2706ebc04e4d98036f2e1dcfd47d/frameset.htm
Check UME data source configuration.
Some quick FAQs can be found at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad47eb90-0201-0010-7cb2-ddfa5ed879ec
Hope this helps.
Best Regards,
Srividya.R

How to save the data to sap abap using Adobe Flex

Hi Everybody......
I am new to Adobe flex with sap abap.
      How to save the data in sap abap using Adobe Flex coding is Action Script and using RFC web service.
Please give me any suggisions on that.
Thank you
Venkatesh V

Hi Venkatesh,
Try with folowing coding...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
     initialize="initApp()">
     <mx:Label x="10" y="23" text="Airline" width="90" id="lblAirline"/>
     <mx:TextInput x="108" y="21" id="txtAirline"/>
     <mx:Button x="10" y="49" label="Get Data" id="btnGetData" enabled="false" click="getData()"/>
     <mx:DataGrid x="10" y="97" id="dgFlightData" dataProvider="">
     </mx:DataGrid>
       <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               import mx.rpc.AbstractOperation;
               import mx.rpc.events.FaultEvent;
               import mx.rpc.soap.LoadEvent;
               import mx.rpc.events.ResultEvent;
               import mx.rpc.soap.WebService;
               [Bindable] public var flightData:ArrayCollection;
    private var flightWS:WebService;
     private function initApp():void{
          flightWS = new WebService();
          flightWS.wsdl = "http://uscib20.wdf.sap.corp:50021/sap/bc/soap/wsdl11?services=ZGTEST&sap-client=000";
        flightWS.addEventListener(FaultEvent.FAULT,onWSError);
          flightWS.addEventListener(LoadEvent.LOAD,onWSDLLoaded);
         flightWS.addEventListener(ResultEvent.RESULT,onFlightWSGotResult);
          flightWS.loadWSDL();
private function getData():void{
          var operation:AbstractOperation = flightWS.getOperation("ZGTEST");
          var input:Object = new Object();
          input.Airline = txtAirline.text.toUpperCase();
          operation.arguments = input;
          operation.send();
     private function onWSError (event:FaultEvent):void{
     private function onWSDLLoaded(event:LoadEvent):void{
          btnGetData.enabled = true;
     private function onFlightWSGotResult(event:ResultEvent):void{
          flightData = event.result.SFLIGHT;
          ]]>
     </mx:Script>
</mx:Application>
Regards,
Vinoth

Reading and printing the pdf file in abap reports.

Hello friends .
how to read pdf file and print the contents of the pdf file in abap reports.?
Edited by: Shivanand Kalagi on Jan 11, 2008 12:47 PM

HI Brad Bohn,
Issue is not only with the file damaged.
My requirement is to place the PDF file in FTP folder using FTP_COMMAND, FTP_R3_TO_SERVER Function Modules.
I'm placing the PDF sucessfully in FTP Folder. When i try to open it's showing the "File cannot be opened because it's damaged....".
I'm not sure whether i'm placing the PDF file in correct way.
Regards,
Saran

Regarding the Remote Function Module

hi,
Can any body can provide the brief information regarding the Remote Function Module.
1)How to create the remote function module
2)how it differ from the normal function module
3)any special features about this.
Thanks in advance

Hi
RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
and you will be passing an Import parameter DESTINATION to it.
Other code and usage will be similar to any fun module;
Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
Refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm
check out the following link it might help you
http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCFESDE2/BCFESDE2.pdf
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
<b>Reward points for useful Answers</b>
Regards
Anji

What is the role of an abaper in upgradation project from 4.7 to ecc6.0?

Hi anybody pls forward any documentation and ppts to understand the upgradation project
What is the role of an abaper in upgradation project from 4.7 to ecc6.0?
what we have to check and we have to upgrade give some guidance
thanks in advance.

Hi,
check the below link..
http://www.thespot4sap.com/upgrade_guide_v2.pdf
reward if helpfu.
Regards,
Nagaraj

Regarding the clusters in HR - ABAP

Similar Messages

Maybe you are looking for