Regarding the JDBC Receiver Communication Channel error

Hi All,
While executing Jdbc to Jdbc interface, i am getting error in jdbc receiver communication channel. please see below message for error description..
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel 'JDBC_AccntStatements_Receiver', Service 'BS_BusinessSystem', Party '': JDBC Adapter configuration not activated
Note: the channel status is active and activated(not in change mode).
Any idea on this error.
thanks,
Madhusudhan.

Hi
According to your Error Message,
Saying that JDBC Configuration is not Active.
Once again cross check all the config is Activated & also Test your Config Using Config Test Tool in ID
And also check in RWB-Adapter Engine-Adapter monitoring ---select the option instaled & Started. whether the JDBC Adapter is working fine or not

Similar Messages

JDBC Receiver Communication channel Error

Hi Friends,
I am facing below error in JDBC Receiver Communication chnnel.
Please shared your views.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'KRSAPJOB' (structure 'Statements'): java.sql.SQLException: [SQL0204] KRSAPJOB in KRONOSMF type *FILE not found.
thanks
Mohit

Hi Mohit,
I received a smiliar error with the receiving JDBC Communication channel. Please talk with your database Admin regarding the stored procedure.
Either one of the fileds in the database is Mandatory and you are not sending that field valiue OR
the data type for one of the fields definied is not matching the one in the database and the stored procedure is failing and throwing an exception.
Teresa

Error in the SOAP Receiver communication channel

Hi ,
My scenario is RFC - to -SOAP (synchronous ) i have specified the TARGET URL inthe SOAP receiver comminication chanel.. but while testing the interface by providing the test data from R/3 .. I'm not getting any Respose.. ..
If I check in the SXMB_MONI in i'm getting the following message .. but the URL whicjh i provided that is fine.. but my doubt is through XI may be it's not able to connect the Target System... .. so, please suggest me...
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: www.webservicex.net</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards
Jain

By default, the SOAP adapter sends the SOAP message with the content type text/xml.
When you check "Do not use SOAP envelope", the default contnet type is application/xml.
You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
Check out this
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
One way of testing ur scenario
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
Also have a look here
SAP Note 856597
reward points if solution found helpfull
regards
chandrakanth

SMTP Receiver Communication Channel error: connection refused

Dear all.
When migrating processes from XI 3.0 to PI 7.1 we run into the problem that we can't get the SMTP Receiver Communication Channel working on PI. We get the following error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect
(The NetWeaver Administrator log shows the following:
unable to call the mailer: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect)
- We copied all configuration settings 1-on-1 from XI to PI, and double-checked we made no mistakes.
- We confirmed the PI system can in fact reach the mailserver by successfully sending Email from the ABAP stack of the PI system (transactions SOST and SCOT)
- When deliberately mistyping the mailserver URL, we get the error: java.net.UnknownHostException. This makes me believe that the 'connection refused' error we get (after re-entering the correct mailserver URL) is indeed coming from the mailserver. But why would it refuse the connection if it allows the connection from the ABAP stack of the same server? And why didn't we run into any such problems on XI?
Any help is much appreciated!
Kind regards,
Eddy Driessen.

Hi All,
We have upgraded our XI3.0 system to PI7.1 and currently performing testing for different adapters. We are also facing similar problem for a scenario File to Mail
19.11.2010 11:31:56     Error     Mail: error occured: java.net.UnknownHostException: [url]
19.11.2010 11:31:56     Error     Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException
19.11.2010 11:31:56     Error     Adapter Framework caught exception: Failed to call the endpoint
19.11.2010 11:31:56     Error     Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to:                     com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null " null"];                     nested exception caused by: java.net.UnknownHostException: [url].
19.11.2010 11:31:56     Information     The message status was set to WAIT.
*[url] = Mail server
Can anyone suggest the steps to solve this error
Thanks
Varun

RFC , IDoc , XI and JDBC receiver communication channel--- Good Design

Hi Experts,
We have developed around 60+ interfaces on PI7.1 EHP1, in that 20 interfaces sending data to Data Base using JDBC receiver communication channel, 15 interfaces ABAP inbound proxy using XI adapter,10 Scenarios using IDoc receiver channel and 15 scenarios using RFC receiver channel.
But I have created only one IDoc, XI , JDBC and RFC channel.
Is it right idea/design or do I need to create more channels to handle multiple request.
Please share your thoughts on this.
Regards,
JAM

Hi,
For XI,RFC and Idoc when it's pointing to one SAP system you don't need any further comm channels.
For JDBC , if you are pointing to only one database you can use the same channel, if the target/databse changes you need more comm channels.
Your Design is as per the standards.
Regards,
Sainath Chutke

Error in JDBC receiver Communication Channel

Hi,
I am facing a problem at receiver communication channel of JDBC adapter. I am gettting the error as,
"com.sap.aii.af.ra.ms.api.RecoverableException: Channel has reached maximum concurrency(5,000 concurrent Messages) and no free resourse found within 5,000 milliseconds; Increase the maximum Concurrency Level."
I am having the configuration on 4 different nodes. but suddenly only 1 out of 4 is working fine but remaining 3 are throwing this exception. It says to increase Maximum Concurrency level but i want to send only one message through one channel.
Is there a way to rectify this error. I am in deep trouble.
can anyone help me out in solving this issue, Its very greatfull if you do the needy.
Thanks,
Soorya,

Hello Aarthi,
I have gone through the link which you have provided for me in this regard. But i am not clear why those values,
AFW.Call.maxConsumers 10
AFW.Recv.maxConsumers 5
AFW.Rqst.maxConsumers 10
AFW.Send.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Call.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Recv.maxConsumers 10
JDBC_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Send.maxConsumers 10
These are concerned to MS only but not at JDBC adpater.
We have to look at JDBC prospective but not at the MS prospective.
So can you please look into the issue as JDBC adapter perspective.
Its like this that, there are 5000 messages are waiting for the free resource with in the next 5secs and as it is reached maximum concurrency of 1.
So my question here is,
Is there only one option to increase this value to 2 or more?
Or else do we have any other option to overcome this problem.
Please reply to this ASAP.
Thanks,
Soorya.

JDBC to JDBC Scenario - Communications Channel Error

I am following the published JDBC to JDBC Scenario:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step-by-step+guides
I am a 3rd Party Vendor, and I'm using NX7: SAP Exchange Infrastructure. My goal is to have a JDBC Sender that sends MS Access data from my PC to NX7, and have a JDBC Receiver that receives MS Access data, and map the data from one database to the other via XI per the scenario, with both databases on my PC.
I set up the NX7 SAP XI per the scenario, but I'm getting an error on the NX7 Communications Channel:
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb' using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
The data source is in
C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb on my PC and it is a shared folder. My PC IP 204.245.44.232 is a public IP address. It should be using the JDBC-ODBC bridge driver in the JDK.
Why am I getting the error?
Thanks,
Ed Culnane

Hi
Connection Parameters are of given below check
Transport Protocol: JDBC 2.0
Message Protocol: XML SQL Format
Adapter Engine: Integration Server
JDBC Driver: jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb
5) In my case there is no userid and password required, but if you have userid and password, then the parameter for Connection becomes,
jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb;Uid=yourid;Pwd=yourpwd;
Well ms access file should be in the XI Server path or it should be able to accessed by the XI
Try this above option of keeping u r file in the XI Server path instead of the local
rgd
srini

SOAP Receiver Communication Channel error

Hi,
In my scenario, I am calling webservice using soap adapter. I have been encountered with the error
SOAP: call failed: java.net.SocketException: Connection reset .. in the communication channel monitoring.
Please could you let me know why is this error coming?
Regards,
Vishnu.

Hi
have a look at SAP note 709140.
may be the problem due to heap size on server.
see the following links also :
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4061https [original link is broken] [original link is broken] [original link is broken]://HTTP error
Some errors in an XI production environment
Regard's
Chetan Ahuja

SAP XI/PI JDBC Receiver communication channel

Dear Expert,
We had few DAE running in company, recently I had below problem, need expert to advise how to overcome this problem.
Try to execute below JDBC statement in our few AE and DAE,
=============================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:MT_OSPEN_TEST_DATA_JDBC2JDBC_COMMIT_T1 xmlns:ns0="http://testing/pen/test/jdbc2jdbc_commit">
<STATEMENT_UPDATE_INSERT_MYTESTTABLE>
<dbTableName action="UPDATE_INSERT">
<TABLE>TMDB_DATA.MYTESTTABLE</TABLE>
<access>
<COLUMN_VARCHAR1>Constant001</COLUMN_VARCHAR1>
<COLUMN_VARCHAR2>Constant002</COLUMN_VARCHAR2>
<COLUMN_FLAG>Y</COLUMN_FLAG>
</access>
<key>
<COLUMN_VARCHAR1>Constant001</COLUMN_VARCHAR1>
</key>
</dbTableName>
</STATEMENT_UPDATE_INSERT_MYTESTTABLE>
<STATEMENT_COMMIT>
<dbTableName action="SQL_DML">
<access>COMMIT</access>
</dbTableName>
</STATEMENT_COMMIT>
</ns0:MT_OSPEN_TEST_DATA_JDBC2JDBC_COMMIT_T1>
=============================================================================================
DAE with MSSQL DB, can execute above statement successfully but
DAE wit Oracle DB had below error:
My question is, why DAE with MSSQL DB can execute the above statement without any error and DAE with ORACLE DB cannot execute the above statement correctly ? How to overcome this problem if I need to execute this statement in DAE ORACLE ?

Hi,
For XI,RFC and Idoc when it's pointing to one SAP system you don't need any further comm channels.
For JDBC , if you are pointing to only one database you can use the same channel, if the target/databse changes you need more comm channels.
Your Design is as per the standards.
Regards,
Sainath Chutke

Testing the JDBC adapter communication channel

Hi
I've created an interface which gets the sender payload using a JDBC adapter.
Basis have installed the JDBC driver for the database where the data resides
I've configured the communication channel to poll every 10 minutes
So far nothing appears to be happening
Can I test the communication channel independantly?
Is there a procedure to make the communication channel active?
Is there an admin area where I can see if there is an issue with the communication channel.
I've checked SMQ1, SMQ2 and SXMB_MONI and there are no messages
I've also checked runtime workbench => adapter monitoring => communication channels but I get an empty list
all help will be very much appreciated

Hi Geoff,
It is not possible to check only the communication channel but we can check the complete scenario confogured in Integration Directory.
1. Open ID.
2. Goto Tools.
3. Provide the sender and the receiver parameters.
4. Also provide the payload in the Payload section.
5. Now, goto Test Configuration
6. Select Run.
This shows you, if there are any issues in the configuration.
Thanks,

JDBC Sender Communication Channel Error

Hi,
We are facing the below error in Sender JDBC communication channels:
The JDBC driver returned the following error message: 'java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]No ResultSet set was produced.'
We are getting this error in channels which are using stored procedures but not in channels using direct sql query statements.
The database is not having any data currently.
So is the above error because of no data or some other issue?
Any ideas?
I have searched the sdn but didnt find anything appropriate.so posting a new thread.
Thanks,
Anu.

Can you try again after filling in few records in the DB? I am suspecting the way SP has been written ... check if it is required to return value from SP?

What to specify in my JDBC receiver communication channel

Hi!
In my Receiver comm channel I have selected
Adapter Type:JDBC
Receiver
Transport protocol: JDBC 2.0
Message Protocol: XML SQL Format
Adapter Engine: Integration server
JDBC driver:??????
Connection: ??????
I dont have any idea as what to give here, How do i check which JDBC driver i am using? and also Connection parameters?
Help me
Thanks

Hi Datta,
Check
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
Best regards, Maksim Rashchynski.

Update query not working in the JDBC sender Communication channel

Hi,
We are working on JDBC to File scenario. As per the configuration, XI should pick the data from SQL database every 20 secs and should update the corresponding flag. We are using subquery in the select and update statement as both header and detail tables are involved.
Now the issue is, select query is working fine but update statement is not working as expected. It is somehow updating some other records rather than doing for the ones selected by the adapter.
Moreover logSQLstatement is also not working. Hence we are unable to identify the records which are getting updated.
Please advise.

Hi Rumi,
See Question 8. Transaction Handling (Sender) in [SAP Note 831162 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 JDBC Adapter|https://websmp130.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=831162].
8. Transaction Handling (Sender)
Q: If I have the following configured in a JDBC Sender:
Select Query:
SELECT column FROM TABLENAME WHERE FLAG = "TRUE"
Update Query:
UPDATE TABLENAME SET FLAG = "FALSE" WHERE FLAG = "TRUE"
How do I know that the JDBC adapter will not update newly added rows (rows that were
added between the time that the SELECT and UPDATE queries were executed) that were
not read in the initial SELECT query?
A: The SELECT and the UPDATE are run in the same DB transaction, i.e. both statements
have the same view on the database.
Make sure that both statements use the same WHERE clause. An additional
requirement for the correct operation of this scenario is the configuration of
an appropriate transaction isolation level on the database
(i.e., repeatable_read or serializable). You might also consider using a
"SELECT FOR UPDATE" statement instead of a plain SELECT statement to
ensure proper locking on the database. "SELECT FOR UPDATE"
is not supported in MS SQL database. In this case please make use of an
appropriate transaction isolation level on the database. For more details
please contact your DB vendors.
After, see Transaction Handling Issues in [SAP Note 1039779 - JDBC Adapter issues(Escape character,Transaction handling)|https://websmp130.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1039779].
Best Regards.
Pedro Baroni

JDBC Adapter Communication Channel error

I am getting this error for a JDBC Adapter, I waondering if anybody could point me in the right direction.
I have installed the driver:
JDBC Driver: oracle.jdbc.driver.OracleDriver
Connection: jdbc:oracle:thin:@146.146.78.74:1521:ts1
Error:
Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@146.146.78.74:1521:ts1': SQLException: Io exception: The Network Adapter could not establish the connection
Any help would be appreciated.

The driver has been deployed into the XI server, I just deployed the testing tool from OSS note 1085539.
I am still getting this error.
Exception Occurred : Io exception: The Network Adapter could not establish the connection
Exception Stack Trace : java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
     at oracle.jdbc.driver.PhysicalConnection.(PhysicalConnection.java:420)
     at oracle.jdbc.driver.T4CConnection.(T4CConnection.java:165)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at java.sql.DriverManager.getConnection(DriverManager.java:559)
     at java.sql.DriverManager.getConnection(DriverManager.java:189)
     at com.sap.util.TestJDBCUtil.testDriverManagerConnect(TestJDBCUtil.java:52)
     at com.sap.tests.TestJDBCConnectionServlet.processRequest(TestJDBCConnectionServlet.java:41)
     at com.sap.tests.TestJDBCConnectionServlet.doPost(TestJDBCConnectionServlet.java:74)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Any suggestions?

Error in HTTP_AAE receiver communication channel, PI 7.4 dual stack

Dear Experts,
I am facing the below certificate error in HTTP_AAE receiver communication channel while using the third party (bank) private key. Third party bank server is HTTPS enabled, moreover they have generated the public and private keys on their server, and they shared the corresponding private keys in .p12 format to us. Our scenario in SAP PI is synchronous ABAP Proxy to HTTP_AAE, when I see the message in SXMB_MONI after testing, we get he below certificate error, though we have provided the correct path from keystorage view and keystorage entry in HTTP_AAE receiver communication channel
“com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SENDING_HTTP_REQUEST, sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target”
We have imported the private key provided by bank in Netweaver admin key storage, by following the below steps.
NWA -> Certificates -> Key Storage -> TrustedCA->Import Entry->Entry Type->PKCS#12 Key Pair->select the .p12 file->import.
Please see the attached doc for related screenshots.
Please experts help me experts as this is on high priority from client, also suggest me if I am doing anything wrong here.
Thanks,
Farhan

Hi Farhaan,
do you have only one certificate or multiple certificate? HTTPS can have 2 or 3 certificates (Root, Intermediate [optional, if any 3rd party person is there in the middle then we can get this certificate] and system certificates).
The issue is with the certificate and it can be because All the certificate is not present or path is not correct.
Please refer the below wiki in which solution is given for this peroblem.
Troubleshooting 7.1 - End-User Experience Monitoring - SCN Wiki
The similar issue is resolved by applying SP level patch, please refer the below discussion
SAP PI 7. 3 HTTP_AAE Receiver with SSL
Please check the below blog -
Configure the HTTP_AAE receiver communication channel with SSL
please also check the below discussion
Where to Import Clients SSL certificate for HTTP_AAE
regards,
Harish

Regarding the JDBC Receiver Communication Channel error

Similar Messages

Maybe you are looking for