Regarding types of projects

what is a rollout project?

The only thing that differentiates implimentation to Roll-out is,
say for ex: your client has business units in more than 1 country/location. the country/location where the strategic business consuting is done, business rules are based,gap analysis if done, requirements are mapped into SAP implimentations blue prints are drawn for the impliementation, the company code which is the basis of entire company's business logic, meaning in which ever country the first implementtaion is done..its implementation, but extending same rules and processes and mapping the same to other countries/location it would thn be called roll-out.
say, first you impliment in ex: COCA COLA,USA...it wld be implmentation, then you extend to COCACOLA ,India its wld be called ROLL-OUT.
ex: NAGARJUNA CEMENTS first implementation then extend the same to NAGARJUNA FERTILISERS.
the key thing is it is a roll-out only if there are similarities in business logic...ex: in HR side the employee groups etc.
ROLL-OUT projects are relatively easy, as u already have referencable data in the system to check incase u want to check, how it was done. especially rules in payroll,,its easier to look n copy.
Check this document:
http://www.open.hr/hiz/hrusko/RolloutPresCASE3.pdf
Regards.
Edited by: Sravan Prakash.V on Jan 11, 2008 11:37 AM

Similar Messages

  • Type of projects

    Dear all,
    In WBS , basic data screen contains proj. type field , where different type of projects are shown. what does it mean by cost,customer,capital and service project(Pls. give 1 eg. of each) in SAP terminiology? Construction of building and selling it is which type of project?
    Regards,

    Dear Rohit,
    First you go through "Project Type" Definition:
    An object that groups projects according to criteria, The project type does not influence program control or screen selection. You can use the project type as a filtering criterion in the information system.This is useful for reporting purpose.
    For Example:
    Capital-investment projects
    Customer projects or Sale projects
    Development projects
    Lease Projects
    For Construction industry you can create two types of projects.
    1) Customer or Sale Projects
    2) Lease Projects
    In 1st case you need to create project profile as Sale project, in this you are constructing Residential Building & then selling to Customers
    For this you are create Project Type as "Residential Project"
    In 2nd Case
    You need to create Lease Project profile.In this you are constructing Commercial complexes, Health facilities, Park & Gardens, Hotels, Multiplexes etc. after completion of project same will be given on Lease basis.
    For this you can create Project Types Like
    Commercial Project
    Health Facilities Project
    Hotels Project
    Multiplexes Project.
    Hope its useful.
    Sandeep

  • What are the different type of projects

    i mean how many different type of projects are there in sap implementation..
    what do you mean by,
    enhancement project
    rollout project
    development project
    support project
    is there any thing else other than this?
    please clear my doubt.
    points would be rewarded.
    thank you.

    Check the link:
    http://help.sap.com/saphelp_sm40/helpdata/en/ba/38c93a37c59122e10000000a114084/content.htm
    Implementation Project
    Project to implement business processes in an SAP landscape.
    Create a project structure from the business processes. You can either create a new project structure, or base it on one of the following:
    One or more user or partner templates
    An existing project
    Scenarios and configuration structures delivered by SAP 
    An existing production solution landscape
    Template Project
    A project to create a template.
    A template makes your project structure, or parts of it, with its assigned objects (documentation, test cases, IMG activities), available to other projects.
    You can lock templates, completely or partially, against changes when they are used in other projects. To use templates in other systems, transport them.
    Template projects are especially suited to SAP partner solutions or global rollout.
    Upgrade Project
    A project to upgrade existing systems.
    In an upgrade project you can:
    Upgrade customizing: Upgrade existing functions
    and/or
    Delta customizing: Copy additional functions
    Optimization project
    A project to optimize the flow of business processes, or the use of a software solution.
    You can use optimization projects, for example, in SAP Services.
    Safeguarding project
    A project to resolve a critical situation in the implementation or use of an SAP solution.
    Safeguarding projects show the reasons for a critical situation and coordinate the steps required to resolve the problems.
    Maintenance project
    A project to maintain a solution
    in Change Request Management. The project contains all maintenance activities and urgent corrections of a solution.
    in Check-In/Check-Out Business Processes from the Solution Directory
    Regards
    Edited by: Sravan Prakash.V on Dec 28, 2007 12:25 PM

  • How to set a default date for a custom field of Date type in project server 2010.

    hi,
    can somebody help  me.
    How Can i set the default date for a custom field of date type in project server 2010 ?

    Dear Rohan,
    You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
    Regards,
    Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

  • Activity types rate Project wise

    Is it possible to define activity type rate project (PS) wise since rate is different for each project due to its nature aor any other mechanism by which i can capture

    HI,
    This is possible in WBS level. You need to set the planner profile with the layout WBS element as input parameters. SAP standard is 1-701 layout for this purpose.
    Hope this answer helps
    Vijay

  • How many types of projects exist in sap bw

    i heard that there are two types of projects
    1.implementation project
    2.support project
    and what about up gradation project, migration project, and i want to know what all the projects exists and there processes..
    if not possible please provide the link to navigate me to there

    sb92075 wrote:
    how many types of searching is in dbms ?42(What was the question, again? ;-) )
    Learn something new every day. I thought there were only 2 - successful (aka correct) and failed (aka wrong).

  • Regarding Upgradation of Project

    Hi
    Can you please guide me what exactly is the role of an BW consultant.. For ex: One XYZ  company is Using BW3.1 c now they want to upgrade the systems to BW 3.5 . In this scenario what is the role of an BW consultant and what exactly we are going to do...
    Please send any kind of documentation to my mail id <removed> regarding Upgadation of project.
    Thanks & Regards
    Ajay

    Hi Ajay,
    Please go through this document: How to SAP BW 3.5 Upgrade Prep and Post- Upgrade Checklist
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    Hope this helps...

  • Types of projects

    Plz can any body explain me about the type of projects.

    Hi,
    Plz go through this u understand the types of projects and differences.
    Difference between implementation, support & upgradation projects and the role of ABAPer in each of them
    SAP Implementation:
    SAP Implementation is the whole of processes that defines a complete method to
    implement SAP software in an organization. It is based on best practices and case studies from various literature sources and presents a collection of processes and products that make up a complete implementation method to allow any organization to plan and execute the implementation of SAP (ERP) software. The SAP implementation process is made up out of four main phases, i.e. the project preparation where a vision of the future-state of the SAP solution is being created, a sizing and blueprinting phase where the solution stack is created and training is being performed, a functional development phase and finally a final preparation phase, when the last tests are being performed before the actual go live.
    ABAP Developer Role is to prepare the Technical Specification (based on a Functional Specification given by a Functional Consultant), build the code, Review the code and finally to prepare the Unit Test Cases. Sometimes ABAPer may be asked to do a technical research for an optimal solution.
    SAP Support:
    After a go live, the application needs a maintenance/support to resolve the issues/tickets raised by the users when using the application. Ticket is like a request for changes/bug fixing or a request for a new ABAP Developer Role includes bug fixing/change the existing code due to new requirements/build a new code etc.
    SAP Upgrade:
    SAP Upgrade is nothing but upgrading the software with a superior version which has got more advantages when compared to the earlier version.
    ABAP Developer Role is to go through transactions SPAU/SPDD to compare the old and new version of the change and finally need to activate the relevant one. Some times might need to work on SAP notes too.
    Rewords some points if it is helpful.
    Rgds,
    P.Nag

  • Retrieve all values from project type when project type combo box is null

    Hi,
    We are facing a tight situation here. We have a scenario where we have 2 filter options.
    1) Department ID
    2) Project type
    When department ID is selected all the department IDs should be populated in the combo box and the project type combo box should be empty.
    Similarly, when project type is selected all the project types should be populated in the combo box and the department ID combo box should be empty.
    Then, when more than one value is selected from department ID box and all the values from project type must be retrieved from query level (as per business logic).
    How do we do this? Kindly help us with this situation.

    Basically my situation slightly different.
    I am trying to do a bulk insert on SQL Server table using prepared statement, during that time i am getting the exception. I am using JDBC-ODBC driver. However, if i do individual record insertion, it is working.
    Any idea about this type of problem ?
    Regards
    Ramesh

  • Documentation Types in projects

    Is it possible to differentiate Documentation Types selectable in RMMAIN and Solar01/02 ?
    The reason we want this is that we produce project documentation (sub set of the Documentation Types) in RMMAIN and we produce the Solution documentation (another sub set of Documentation Types) in Solar01 and Solar02.
    We select the Documentation Types available for the Project in SOLAR_PROJECT_ADMIN and all the Documentation Types selected as u201CProject Documentation Typesu201D are then available in RMMAIN, SOLAR01 and SOLAR02.
    At the moment we have 48 Documentation Types and the list is just too long.
    Is it possible to make just a sub set available in RMMAIN?
    Br.
    Are

    Hi Are,
    As far as I know the both applications use the same documentation types, so it wouldn't be possible to make ones exclusive for one of the applications. You should try to organize your projects and roadmaps creating specific types with may a classification on the name of the doc type, so you could distinguish when using in roadmaps or projects.
    Kind regards, Fabricius

  • 641 movement type in Project

    Dear Experts,
    Is it possible to assign movement type 641 in Project for non valuated material (packaging material).
    I have checked it in T_CODE: OPT1, where we can maintain single movement type at a time.
    Our requirement is for both 281 and 641movement type, considering packaging material as capital
    material in Project.
    Please let me know how it can be maintain else suggest any other solution in this scenerio.
    Regards,
    Nitish

    Please correct the movement type is 621 not 641.
    Rgds,
    Nitish

  • Variant to data: Need info regarding type of data

    Hello,
    What I want to do is very basic. I will acquire the image using CCD camera. The
    image is a raw data type: 2D array of type long (4 bytes per element) or integer (2 bytes per element). I can save the image even as .tiff file. Using Variant To Data, I am converting the image so that labview can handle it (I am not sure whether I really need this) before I write that data to some file and save it. I have to define data type for Variant To Data. I tried to define the data type. However, I am confused. Would anybody give me some suggestion?
    Thanks a lot,
    Dushyant

    Hrm, you'll need to be more specific about your actual question in order for us to give you a good answer, but, without more information, I'd say you should just define the type as a 2-d array of either longs or words. (i.e. get an array constant, place a numeric constant inside of it, right click the numeric constant, and select Representation->Long or Representation->Word then wire the constant to the Type input of the Variant to Data).
    If you're dealing with variants, I'd guess you are probably calling an ActiveX control or server to communicate with your camera?
    Regards,
    Ryan K.

  • Regarding types statement in ECC 6.0...plz reply..urgent

    Hi,
    I am copying a program which is in<b> 4.7 to ECC 6.0,</b>i am facing error regarding <b>structures with types<b>...
    The following code in<b> 4.7</b>
    <b>DATA:BEGIN OF W_BMM00.
            INCLUDE STRUCTURE BMM00.
    DATA:END OF W_BMM00.
    DATA:BEGIN OF W_BMMH1.
            INCLUDE STRUCTURE BMMH1.
    DATA:END OF W_BMMH1.
    DATA:BEGIN OF W_BMMH7.
            INCLUDE STRUCTURE BMMH7.
    DATA:END OF W_BMMH7.
    DATA : BEGIN OF TAB_TLINE OCCURS 0.
            INCLUDE STRUCTURE TLINE.
    DATA : END OF TAB_TLINE.</b>
    i have written the same in <b>ECC6.0</b> as below
    <b>TYPES:BEGIN OF tw_bmm00.
            INCLUDE STRUCTURE bmm00.
    TYPES:END OF tw_bmm00 ,
          tt_bmm00 TYPE STANDARD TABLE OF tw_bmm00.
    TYPES:BEGIN OF tw_bmmh1.
            INCLUDE STRUCTURE bmmh1.
    TYPES:END OF tw_bmmh1 ,
              tt_bmmh1 TYPE STANDARD TABLE OF tw_bmmh1.
    TYPES:BEGIN OF tw_bmmh7.
            INCLUDE STRUCTURE bmmh7.
    TYPES:END OF tw_bmmh7 ,
          tt_bmmh7  TYPE STANDARD TABLE OF tw_bmmh7.
    TYPES:BEGIN OF tw_TAB_TLINE.
            INCLUDE STRUCTURE TLINE.
    TYPES:END OF tw_TAB_TLINE,
          tt_tab_tline TYPE STANDARD TABLE OF tw_tab_tline.
    lw_bmm00 TYPE tw_bmm00,
          lt_bmm00 TYPE tt_bmm00,
          lw_bmmh1 TYPE tw_bmmh1,
          lt_bmmh1 TYPE tt_bmmh1,
          lw_bmmh7 TYPE tw_bmmh7,
          lt_bmmh7 TYPE tt_bmmh7,
          lw_tab_thead TYPE tw_tab_thead,
          lt_tab_thead TYPE tt_tab_thead,</b>....
    when i check SLIN errors i am getting the following errors<b>...plz resolve</b>..
    <b>The current ABAP command is obsolete
    <b>Within classes and interfaces, you can only use "TYPE" to refer to ABAP Dictionary
    types (not "LIKE" or "STRUCTURE").</b></b>
    <b></b>

    include strture not allowed.
    rules.
    ABAP Development under Unicode
    Prior to Unicode the length of a character was exactly one byte, allowing implicit typecasts or memory-layout oriented programming. With Unicode this situation has changed: One character is no longer one byte, so that additional specifications have to be added to define the unit of measure for implicit or explicit references to (the length of) characters.
    Character-like data in ABAP are always represented with the UTF-16 - standard (also used in Java or other development tools like Microsoft's Visual Basic); but this format is not related to the encoding of the underlying database.
    A Unicode-enabled ABAP program (UP) is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system (NUS) as in a Unicode system (US). In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
    In a US, you can only execute programs for which the Unicode flag is set. In future, the Unicode flag must be set for all SAP programs to enable them to run on a US. If the Unicode flag is set for a program, the syntax is checked and the program executed according to the rules described in this document, regardless of whether the system is a US or a NUS. From now on, the Unicode flag must be set for all new programs and classes that are created.
    If the Unicode flag is not set, a program can only be executed in an NUS. The syntactical and semantic changes described below do not apply to such programs. However, you can use all language extensions that have been introduced in the process of the conversion to Unicode.
    As a result of the modifications and restrictions associated with the Unicode flag, programs are executed in both Unicode and non-Unicode systems with the same semantics to a large degree. In rare cases, however, differences may occur. Programs that are designed to run on both systems therefore need to be tested on both platforms.
    Other Changes
    1. Bit Statements
    2. Adding Field Sequences
    3. Loops with VARY and VARYING
    4. Creating Subroutines
    5. Saving Programs
    6. Assigning Types for GET/SET PARAMETER
    7. Unreachable Statements
    8. Function Modules with Incorrect Parameter Names
    1. Bit Statements
    Previously, the system checked for the bit statements SET BIT i OF f [TO g] and GET BIT i OF f [INTO g]whether the field f is character-type; X fields, X strings, and flat structures are usually regarded as character-type. For Unicode programs this is no longer useful, because the types X and XSTRING no longer count as character-type and the bit by bit access to character-type fields or structures is no longer platform-independent. Therefore, with these operations in Unicode programs, the field f must be type X or XSTRING.
    For the bit mask operations f O x, f Z x, and f M x you could previously use all number-type and hence all character-type types for the left operand f. In Unicode programs, the f operand must now be type X or XSTRING.
    2. Adding Field Sequences
    When adding field sequences, restrictions apply to the following statements in Unicode:
    ADD n1 THEN n2 UNTIL nz [ ACCORDING TO sel ] GIVING m ...
    ADD n1 THEN n2 UNTIL nz TO m [ RANGE str ].
    1. The operands n1, n2, and nz must be type-compatible with one another.
    2. The distance between nz and n1 must be an integral multiple of the distance between n2 and n1.
    3. A syntax or runtime error occurs if the fields n1, n2, and nz are not in a structure. This structure must be recognizable statically or its valid area must be marked explicitly using the RANGE addition.
    4. At runtime, the system ensures that the RANGE area is not left.
    ADD n1 FROM i1 GIVING m [ RANGE str ].
    1. Field n1 must be within the structure. The structure must be explicitly defined using the RANGE addition if it is not recognizable statically.
    2. For this variant, the system also checks at runtime whether n1 and the addressed values are within the structure.
    3. Loops
    Loops with the VARY or VARYING addition are also problematic in Unicode, since a type-a access to memory contents cannot be ensured and memory can be overwritten inadvertently.
    DO ... VARYING f FROM f1 NEXT f2.
    For this statement, the fields f, f1, and f2 must be type-compatible with each other. To prevent memory contents being overwritten, a RANGE for valid accesses is introduced implicitly or explicitly for the following statements:
    DO ... TIMES VARYING f FROM f1 NEXT f2 [ RANGE f3 ].
    WHILE ... VARY f FROM f1 NEXT f2 [ RANGE f3 ].
    A syntax or runtime error is caused if f1 or f2 are not included in f3. If the RANGE addition is missing, it is defined implicitly from FROM f1 NEXT f2 as follows:
    1. If both f1 and f2 are statically recognizable components of the same structure, the valid RANGE area is defined from the smallest structure that comprises f1 and f2.
    2. A syntax error is triggered if it is recognizable statically that f1 and f2 are not part of the same structure.
    3. A valid area must be defined explicitly using the RANGE addition if the connection between f1 and f2 is not recognizable statically.
    If you specify a deep structure as the RANGE addition, the system checks for every loop pass that there are no field references, object references, tables, or strings in the area read.
    4. Creating Subroutines
    When automatically generating subroutines using the statement GENERATE SUBROUTINE POOL itab NAME name, the generated program inherits the content of the Unicode flag of the generating program.
    5. Saving Programs
    When automatically generating programs using the statement INSERT REPORT prog FROM itab, default values are set for the TRDIR entry as before. Amongst other things, this statement has the new addition UNICODE ENABLING uc, with which the Unicode flag of the inserted report receives the value of uc. If this addition is missing, the following applies:
    1. A Unicode program creates a Unicode program.
    2. A non-Unicode program in turn creates a non-Unicode program.
    3. A non-Unicode program becomes a Unicode program if it is overwritten by a Unicode program.
    4. A Unicode program remains a Unicode program if it is overwritten by a non-Unicode program.
    6. Assigning Types for GET/SET PARAMETER
    For the statements GET PARAMETER ID pid FIELD f and GET PARAMETER ID pid FIELD f, f must be character-type. You can use the EXPORT and IMPORT statements for storing non-character-type fields and structures.
    7. Unreachable Statements
    In Unicode programs, unreachable statements cause a syntax error. In non-Unicode programs, there was previously only a syntax warning.
    8. Function Modules with Incorrect Parameter Names
    In Unicode programs, calling a function module, whose parameter names are specified statically as a literal or constant, causes an exception that can be handled if an incorrect parameter name was specified. This only applies to function modules that are not called via Remote Function Call. In non-Unicode programs, an incorrect name was previously ignored.
    http://service.sap.com/instguides
    --> SAP Business Suite Applications
    --> SAP ERP
    --> mySAP ERP 2005
    --> Upgrade
    --> Upgrade Documentation - mySAP ERP 2005 SR2
    There choose your database and operating system.
    If you're looking for functional details check
    http://service.sap.com/releasenotes

  • Regarding Types of reports

    Hi friends
                       Help me to find the tutorial for ABAP Reports(Types and their applications)

    Hi Friend,
    Programs that can be run
    These programs can be run by a user by entering the program name or a transaction code. They are they actual application programs within the R/3 System, and are explained in more depth later on.
    Type 1
    You can start a type 1 program by entering its program name. For this reason, they are also known as executable programs. When you start a type 1 program, processors are started in the runtime environment that call a series of processing blocks (event blocks) in a predefined sequence. The sequence is oriented towards reporting tasks. This is why executable programs are also known as reports. For further information, refer to Running Programs Directly - Reports.
    A special type of type 1 program is a logical database. You can start logical databases together with reports. A logical database contains subroutines that are called by an invisible system program in a prescribed sequence for type 1 programs. The subroutines make certain reporting functions reusable. For further information, refer to Logical Databases.
    Type M
    Type M programs can only be started using a transaction code. A transaction code starts a screen, which consists of the screen itself and its flow logic. Screen flow logic can call special processing blocks (dialog modules) in the corresponding ABAP program. Since type M programs contain mostly dialog modules, they are known as module pools. For further information about running module pools, refer to Dialog-controlled Program Execution - Transactions.
    Programs that Cannot Be Run Directly
    These programs cannot be started directly by a user. Instead, they contain processing blocks or other source code that can only be used by an application program that is already running. They are described in more detail in a later section.
    Type F
    Type F programs are not executable. They serve as a container for function modules. When you call a function module from an ABAP program, the entire main program is loaded into the internal session of the current program. Since type M programs contain mainly function modules, they are known as function groups. Function modules are a type of procedure. They are described in more detail in the Procedures section.
    Type K
    Type K programs are not executable. They are container programs for global classes, and are known as class definitions. Classes belong to ABAP Objects and are described in more detail in that section.
    Type J
    Type J programs are not executable. They are container programs for global interfaces, and are known as interface definitions. Interfaces belong to ABAP Objects and are described in more detail in that section.
    Type S
    Type S programs are not executable. They are container programs for subroutines that should only be called externally. When you call a subroutine from an ABAP program, the entire main program is loaded into the internal session of the current program. Since type S programs contain mainly subroutines, they are known as subroutine pools. Subroutines are a type of procedure. They are described in more detail in the Procedures section.
    Type I
    Type I programs cannot be run directly, and contain no callable processing blocks. They are used exclusively for modularizing ABAP source code, and are included in other programs. Include programs are described in more detail in the Source Code Modules section.
    <b>Reward point, if helpful.</b>
    Regards,
    Atin

  • Material type for Project related

    Hi ,
    When creteing the material master we have which take  "Material Type"  if it related to project , i am perticular about construction and instaltion related business topic . Normally we take Raw material , semi finished material and finished material in case of manufactureing industry , in construction in

    Hi
    In projects also maximum Raw material is used. Usage of semifinished and finished material is minimum.
    i am particular about construction and instaltion related business topic .
    In construction industry raw material type is used.
    Ex:
    Cement, bricks etc...
    Cement and bricks is a finished product for production industry, but this as RAW material for construction industry.
    THanks
    S.murali

Maybe you are looking for

  • Using iphone4 in the UK

    What do I have to do to activate my phone in the UK for making and receiving calls and email. No texting. What is the cost? (Customer private information has been edited as per Verizon Wireless Terms of Service). Message was edited by: Verizon Modera

  • Apex 4.0 Image Buttons to update SQL Where clause of Report?

    I made a table called Letters with 1 column in it called Letter and the data in it is simply A,B,C, to H. I made an apex form around this table and then created two image buttons A and B that display above the reporting area b/c i want to be able to

  • Mounting Sol 8 SPARC disk on Solaris 10 x86

    I have been having a very difficult time mounting a Solaris 8 (SPARC) SCSI disk on a Solaris 10 x86 box. The disk is recognized (it shows up under format as c2t2d0). I cannot mount it at all. The individual slices will mount under another Sol 8 machi

  • Adobe reader xi stopped working

    Question?  I tried to print a statement this morning with Adobe Reader XI.  A screen appeared telling me that Adobe Reader XI had stopped working and that windows was checking for a problem.  I thought I could just download a new Adobe Reader XI but

  • Can't sync music or podcasts after update to iOS4

    Just upgraded my iPhone 3G to iOS4. Since doing this, iTunes can no longer sync music or podcasts to the iPhone. Only the apps will sync. iTunes claims the files cannot be found - despite the fact that they are all listed correctly in iTunes and all