Regarding VA01 issue

hi all ,
i got issue in VA01 transaction . actually my customer wants an message in VA01 transaction when quantity is not there . for example if user entering 20 quantity for material but it has got 3 quantity only even though it has got 3 quantity its going to next screen as per my requriement if 20 quantity is not there it should give message that it has not got 20 qantity ,it has only 3 quantity . can anybody help me how to solve this issue . Thanks

hi
Please use this FM to check for particular material
CALL FUNCTION 'SD_MATERIAL_DETERMINATION'

Similar Messages

REgarding licensing issues involvng 'Computername' and the use of UpperCase4 vs Lowercase Letters

Does any one know if it would cause problems for the Office 365 software license to be displayed as licensed to an ALL CAPS name like 'MY-FAVORITE-PC' but the computer itself shows the computer name to be 'my-favorite-pc"?
If it does, which one should I change? A couple of people here have had this same problem (which usually occurs when they change to using a different PC for their account) I have to Deactivate their Old PC namer and then install the licnse to
their New OC using whatever name it has.
On more than one system, this has resulted in various odd "failure to contact Microsoft server" issues when activating. The problem continues for 7 days and then their copy of Office starts showing reed warning bards and eventually gets totally
unusable.
However, if I uninstall the office, deactivate the license, and reinstall it once again, it install just fine and acts ok but invariably at some point, the same thing occurs.
On one of them I noticed the difference in the case of the letters used in the computer name and the license name. On others I am wondering about various software add ins for Outlook or some other 3rd part application causing the problem. Whatever
it is, it gets extremely annoying. Officer 365 apparently must run an activation sequence almost constantly while Office 2010 (and I presume 2013) ran it once and were done with it.
Searching Google I have found too many possible reasons along with a lot of people who have had the same problems but no one seems to have the 100% solution. This has only started happening since we switched to Office 365 and only
seems to occur on systems that are changed out to different ones with the same User's 365 Account which is in good standing and has 5 available licenses of which only one is in use.
In the case of the caps vs lowercase I also wonder if changing the name to CAPS on their PC would create additional problems on its own?

Hi Questorfla,
For the Office 365 software license issue, I recommend you can post in dedicated Office 365 Forum to get a better response:
http://community.office365.com/en-us/f/148.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Regarding Consignment Issue

Hi Friends,
I have a question regarding consignment issue. During the consignment fill up I have entered a material (machine) that is configurable and also assigned a serial number to it. Now when I try to create an order (consignment issue) and enter the corresponding serial number tied up to the machine in Consignment fillup, the system is taking just the higher level item of the BOM. The BOM is not getting exploded in the order. Can anyone please suggest where I can control. Any help is greatly appreciated. Thanks in advance.
Sunny.

Hi
I don't think it will b exploded in Consignment Issue as it has already exploded in Consignment fill up. Consignment issue means what selling the stock which is at consignee's place so it dose not have to b exploded. u carr on like that and see what is the flow if it is ok then go on otherwise u let me know the problem.
Thanks
Mastan

Regarding Performance Issue in MI Application

Hii All,
We have made a SmartSync MI Application.Everything thing is working fine.But the scenario is this that when we try to navigate through the application from one page to another ,for example if i click on one link to get details corresponding to that link(i.e) we are retreiving the data from the local database, but this is taking a lot of time and according to our buisness need we have to reduce this time to fetch the data.
Can anyone help me regarding this issue what can be done either in coding part, what parameters & standards to follow to improve the performance.
Thanks,
Devendra Phate

hello deven,
if you are only focusing on your application's performance
on the aspect of usability i.e. less waiting time, fast
response UI, i would personally suggest you to use AJAX.
put some processing part on the browser side and making
data retrieval from MI asynchronous... this way, your user
don't have to wait for all data to be presented, but rather
could work on the data presented in pieces (i.e. asynchronously).
anyway try googling for AJAX...
regards
jo

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My iphone plus is bending, what does Apple offer regarding this issue? I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is u

My iphone plus is bending, what does Apple offer regarding this issue?
I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is under Slovenian ownership. This means that the original warranty comes from Slovenia, bit complicated but still I would like to get an urgent answer how to proceed with this issue, thanks

Maybe i should have only asked if anyone is aware on apple's policy
regarding bending. I took the point that this seems not a proper forum to
pose Q's to apple thanks to both
On Wednesday, November 5, 2014, Apple Support Communities Updates <

I just want to know if you could help me regarding my issue purchase Adobe Photoshop at Aps store unable to proceed the order due to forgot the answer for the 2 questions.

I just want to know if you could help me regarding my issue purchase Adobe Photoshop at Aps store unable to proceed the order due to forgot the answer for the 2 questions.
I dont know how to check my particulars during filling up my registration in apple store support.
Hope u could give us advice. Thanks...
CandidoSG
<Edited by Host>

Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.
http://support.apple.com/kb/HT5699

Regarding goods issue

Dear GUrus,
I am issuing raw material against a production order.
the BOM for the finished material is
to produce one qty of FG 30 KG of raw material is required
and the raw material available in my store is only 10KG. and it still allows me to issue that 10kg of raw material against that production order.(I am doing this with movement type 261)
Where as the requirement from my user is that the system should issue an error msg that there is deficit of raw material quantity.
Please look into the matter adn throw some light as to how do i set this in the system.
Thanks

Hi Anand,
Check with your user, if they are OK with this -
Release of Production order is possible only if all components exist i.e. full qty. If they are OK with that, then go to OPJK for the plant - order type - business function (2) combination set Release Material indicator to 3.
This will prevent the order being released due to shortage of component qty.
Hope the above is helpful.
Regards,
Vivek

Regarding goods issue (reversal) against process order

Dear friends,
Recently i have noticed one strange thing in SAP.I have created one process order and against it i have done the confirmation.Now when i go to Transaction code mb1a and select movement type 262 (Goods Issue to process order-reversal) and give the storage location and in next screen i gave order number,material code and its qty.These material code is not maintained in the bom of order header material.And even in process order in material tab we haven't maintained this material.Also while doing the confirmation in goods movement we haven't maintained this material.Then also system allows me to do so.Which means material which i haven't issued against the process order, system is allowing me to do its reversal i.e (262).because of which system is creating the stock for that material, which is not correct.
Can we control this behaviour of system.
Thanking you guys in advance.

Hi Jitendra,
This is fact and there is no standard Control available for the same.Only thing you can do is put control over Movement type 262 or try it by implementing User Exit.
I am not sure but you can use Enhancement CCOWB001 - Customer exit for modifying menu entries.
Include is LXCOWBF01.
Regards,
Dhaval

Regarding Goods issue date and order date.

Hi All,
Could you please tell me from where we can fetch Goods issue date and Order date.
Waiting for your reply.

Preeti,
Goods issue date/order date of what ?
Goods can be issued in a number of ways, in reference to many types of documents. In each case, the GI date and order date are found in different places.
Please elaborate your request.
Best Regards,
DB49

Contacting skype via email regarding payment issue

I would like someone to contact me via email regarding the following issue:
I received a notification my account with Skype has been canceled. I surmise that for some reason or another Citibank has not been sending payment via electronic payment per my contract with SKYPE.
I have contacted Citibank just now via email, sending then the following message.
(please email me back with your contact phone numbers so I can resolve this unfortunate incident or issue which I have first heard about an hour ago via an email to me from SKYPE)
Received this from your accounting operations.
Something wrong here as the payments are suppose to be make automatically when they g3et near the ten dollar mark.
I have not been following payment as it has been done automatically-and this is the first notification.
How can this be? This amount shown is very strange and very incredulous to be this high unless Citibank Guam Visa has been not paying the amounts when charged by SKYPE.
Obviously if this is true, for about the past five or so months by my estimate this has been happening.
What is perplexing is that the credit card is still good and ca not understand how it was’t paid.
Could you send me the past 2012 payments so I can see what has been going on?
I will send this on to Citibank as an inquiry.
Anyway, I do not want to cancel my SKYPE account.
Thank you.
Alan J. Sokoloff
*edited for privacy*
----- Forwarded Message -----
From: Skype <[email protected]>
To: *edited for privacy*
Sent: Monday, January 28, 2013 9:25 PM
Subject: Problem with your payment
This is an automated email, please don’t reply.
Hi there Alan Sokoloff,
Problem with your payment
Unfortunately, your payment failed, but don’t worry, we didn’t deduct any money from your card.
Here are your order details:
Skype Name: alan.sokoloff4
Total amount: $71.28
Transaction date: Jan 28, 2013
Order number: [removed for privacy]
Order status: Refused
Why was my payment refused?
Reasons for your card payment failing can be:1. You entered the wrong details. Make sure you have the correct details and try again. You didn't have enough money on your card. Make sure you have enough money before you try again. You might be using an anonymous proxy or proxy server to access the internet, which we don't allow during the purchase process. Skype is always doing its best to protect you from any kind of fraud. Sometimes this can cause perfectly legitimate purchases to be refused.
What can I do?
We recommend using another card or one of our other payment methods such as Skrill, one-off bank transfer or retail vouchers. View the different ways to pay for Skype products.
Talk soon,
The people at Skype
Lost Password·Account Settings·Help·Terms of Use·Privacy
Getting help for Skype
While you cannot reply to this email, you can contact us through our help section for assistance.
You can also visit our forums.
Protect Your Password
Skype staff will NEVER ask you for your password via email. The only places you are asked for your password are when you sign in to Skype or on our website if you want to buy something or check your account. You will always sign in via a secure connection, and we ask you to ensure that the address in your browser begins exactly like this https://secure.skype.com It should also show a little padlock symbol to indicate the secure connection.
Be alert to emails that request account information or urgent action. Be cautious of websites with irregular addresses or those that offer unofficial Skype downloads. Security updates and product upgrades are made available at www.skype.com or using the client's upgrade function.
© 2003-2013 Skype Limited. Skype Communications S.a.r.l. 23-29 Rives de Clausen, L-2165 Luxembourg.
Skype, associated trademarks and logos and the "S" symbol are trademarks of Skype.
Thanks for any assistance
Alan J. Sokoloff
*edited for privacy*

TJZ1 wrote:
I have attempted numerous times to contact you. I just get stuck in the endless and unhelpful loop.
I only do video chat. I don't know why I am being charged ANYTHING, much less two payments a month of $2.99 and $3.01. The account shows no subscription. Why are you charging me??
I want a TELEPHONE NUMBER TO CALL!
if you are having problems in getting in touch with Skype through their usual webform, you can just try to send an email to [email protected] Skype only offers email, and live chat for premium/selected users.
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

Regarding Excel Issue

As I am facing the issue with microsoft excel while operating formula with excel sheet getting error

Hi,
In regarding of the issue, please provide us more information to assist you better.
Which Excel version are you using? Excel 2013 or other.
Which formula are you using?
Do you mind tell us the whole error message?
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Regarding space issue

There is an space issue in datatop.Could you please help me out in deleting any logs and unnecessary data in that location.As the mount which own datatop is completely filled.

Hi,
Do you have any archivelog files on this disk? If so, consider moving/deleting obsolete files. For datafiles/tablespaces, if it is possible to shrink it, please do so. Otherwise, you need to move it to some other disk.
Also, if AUTOEXTEND is enabled, you need to disable it (at least for now) until you have more space on this disk.
You may also refer to the following document, it should be helpful.
Note: 274666.1 - Cleaning An 11i Apps Instance Of Redundant Files
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=274666.1
Regards,
Hussein

Regarding HR Issue

Hi
Iam doing HR issue to get some infotype change details. But I cannot get the relation between infotype tables other than pernr
Any one can give info regarding change gistory table or infotypes related fields?
Thanks in Advance
GVRao

Hi Venkateswar Rao,
check this as will help u.
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
kindly reward if found helpful.
cheers,
Hema.

Regarding performnce issue

Hi all
Please help me
this is regarding to threads performace issue.
from my java application i am dumping records into Oracle database.for every 15 seconds 1000records are dumped into oracle.
now i want to increase records per second while dumping into oracle
so i decided to use threads
i am working on these from 2 days
but i am not getting any performace.so please reply me
what is the solution to increase the number of records per second dump into
Oracle int this scenario.
Thanking you

Hi,
what is the solution to increase the number of records per second dump intoOracle
With the right configuration, I've been able to insert over 300,000 rows per second.
First, optimize your inserts:
http://www.dba-oracle.com/t_optimize_insert_sql_performance.htm
Next, look at running parallel insert threads, using multiple freelists or ASSM:
http://www.dba-oracle.com/t_parallel_dml_updates_inserts.htm
Finally, using SSD will speed-up optimized inserts:
http://www.dba-oracle.com/oracle_tips_data_load.htm
Hope this helps. . . .
Donald K. Burleson
Oracle Press author

Regarding VA01 issue

Similar Messages

Maybe you are looking for