Regarding With holding tax with CIN version

Hello SAP gurus
I've done all the configuration required for the extended withholding tax type-also have updated the tax type and code in the vendor master.
How to configure automatic surcharge & education cess., With holding tax certificate . What is business place in tds.How to create remittance challan for tds.what is clearing of invoice against down payment.How to create Annual returns of tds.
While making tds entry with miro, systeam taking dummy profit center.
So what does configuration required for above error.
I will assign full points
Regards
Divya

Hi,
If i am not wrong, the system is reverseing the deduction it has made at the time of adv payment.
Its not deducting again.
Consolidate all the three documents -
- Adv pay
- Inv
- Payment
and you would appreciate the beauty of the concept.
Cheers
Raghu

Similar Messages

Conversion of Extended With Holding Tax

Hello Gurus,
I am curretly working on Conversion to Extended with Holding Tax from Classic with Holding tax with the transaction WTMG.
I did test run for:
> Customized Conversion
> Master data conversion and
> Document Conversion.
the issue is when i ran all these in the test run i dont see any errors in the First step (Customized Conversion) and Master data Conversion.
and when i came to the step Final step "Document Conversion" i see the message saying "Document conversion done with out any errors." at this point once there are no errors it should turn green and Activation button should pop up.
But it is not happening. The light is on red irrespective of test run is done with out any errors. and this does not allow me to activate the Extended with hodling.
Can any one please let me know about this issue that what could be the possible reason for this error and kindly give some solution for this.
thaniks,
anand.

Hello Gurus,
I am curretly working on Conversion to Extended with Holding Tax from Classic with Holding tax with the transaction WTMG.
I did test run for:
> Customized Conversion
> Master data conversion and
> Document Conversion.
the issue is when i ran all these in the test run i dont see any errors in the First step (Customized Conversion) and Master data Conversion.
and when i came to the step Final step "Document Conversion" i see the message saying "Document conversion done with out any errors." at this point once there are no errors it should turn green and Activation button should pop up.
But it is not happening. The light is on red irrespective of test run is done with out any errors. and this does not allow me to activate the Extended with hodling.
Can any one please let me know about this issue that what could be the possible reason for this error and kindly give some solution for this.
thaniks,
anand.

With holding Tax Remitence challan - CIN Version

Hai!
this is regarding the creation of remittance challan for with holding tax. some documents are not being picked in the challan remittance( j1inchln). Cheeked with the table with_item for those documents it is clear that no challan has been generated.
When checked with the bsik table the document does not contains any value.
Section code is updated in the doucments. Vendor Masters are also ok regarding the with holding tax.
Can you please tell me the possible ways to solve this.
Thanks!
Rajesh

Hi!
Thanks! Mr.LaxmiNarayana, I checked up with the FSG of Tax accounts and document contains section codes.
Can you please tell what is Bsik Table is for?
thanks
Rajesh

CIN With-holding Tax Table

Dear Sir,
I seek the kind help from the experts as , whic is the table to give the following information related to CIN With-holding Tax :
Information is :
Certificate Number / Challan Number / Challan Date
With Thanks and Regards
B Mittal

Hi,
In with holding tax there are two elements :
            - Withholding types
            - Withholding codes
each withholding type may contain several withholding codes.
In the vendor master record, you assign the with holding type to the vendor, so when you press F4 you get all withholding taxe codes attached to this   tax type.
you can display and change this assignement in customizing
Customizing >>>Financial Accounting>>> Financial Accounting Global settings>>>Withholding tax>>>Extended Wihtholoding tax>>>Calculation>>> withholiding Tax Codes>>>Define withholiding Tax Codes
regards

Query Regarding With holding tax deducted

Hi,
Hi,
I am facing one problem with With Holding Tax deduction.
Let us explaining with example:
1) Ist I passed one entry through T.Code: f-48 then deducted some TDS (Rs. 5000/- down payment).
2) IInd I passed one invoice T.Code: f-43 then deducted TDS (Invoice amount Rs. 10000/- but tds base amount entered Rs. 5000/-).
Here above I passed two entries and deducted total amount of TDS.
3) While at the time of balance amount payment T.Code: F-53 again system will deduct TDS.
I am facing problem here. Why system is again deduct TDS at the time of balance payment. Already balance amount of TDS duducted at time of Invoice.
Please suggest.
Regards
Srinivas Gundala

Hi,
If i am not wrong, the system is reverseing the deduction it has made at the time of adv payment.
Its not deducting again.
Consolidate all the three documents -
- Adv pay
- Inv
- Payment
and you would appreciate the beauty of the concept.
Cheers
Raghu

DOUBT IN CIN (WITH HOLDING TAX TDS)

Payment occured first and Invoice occured afterwards. Now my question how to configure the system for calculation of with holding tax amount.

Hi Prasana,
In the TDS configuration, Define Withholding Tax Types You have to put a tick in the "Per Year, Starting with Month" accumulation type & enter the starting month.
Next in the define witholding tax code you have to put a tick in the box "wtax form" in the calculation Tab.
Next in the define formulas for calculating withholding tax you have to enter the formulas for calculating tax as follows:
To base Amount, Witholding Tax Rate etc. can be maintained.
Hope this helps.
Regards,
AVD.

Regarding the Grossing up Method for With holding Tax

Hi
I am implementing SAP ECC 6.0. I am having a specific requirement with regard to With holding TAX. If i configure the WT, the tax amount will be deducted from the invoice & posted to a separate GL account. But in My case, the WT amount should be posted to a GL Account and the amount should not be deducted from the vendor account.
This arises in case of foreign payments

Try following this guide for Defining Withholding Tax Formulas
http://help.sap.com/saphelp_erp2004/helpdata/en/7b/5d823ae35c3769e10000000a114084/frameset.htm
and this one Defining Withholding Tax Types and Withholding Tax Codes
http://help.sap.com/saphelp_erp2004/helpdata/en/8e/5a823a89569e68e10000000a114084/frameset.htm
This may help you!

Calculation of with holding tax

The requirement goes like this.
We have to first remove the with holding tax data from the vendor master.
And created 1 KR(amount : 1000) & 1 RE(amount : 2000) document type.Also we posted both the above invoice documents in one Z1 clearing document.
Then add the with holding tax information in vendor master.
Then we executed the report RFWT0020 for that vendor and the document number.Its updating WITH_ITEM table with only the KR total(1000) under WT_QSSHH field.Its not considering RE total.
I debugged the program RFWT0020 and found a function module FI_WT_GET_P_WITH_ITEM which performs the with holding tax calculation.When i checked the function module,its fetching from global memory.
Is there any user exit or BADI for this.We are using 4.7 version.
Please suggest how can i update the correct with holding tax amount in WITH_ITEM table.

Hi,
i´ve used this badi for MM (incoming invoices):
MRM_WT_SPLIT_UPDATE
Best regards.

Re: With holding tax is not picking up while excution of RERAPP

Dear team,
While executing the RERAPP.With holding tax is not picked.We are working on 4.7 version.We had suggested a badi to pull the with holding tax field.Still system is not showing any caluculation.Plz advice us if any one of you did the immplimenttation in 4.7 and how you resolved this problem .So that it would be help ful for us too.Please do the need ful.
Regards,
Suma.

Dear Sir,
What we did is all the with holding tax data include the basic amount calculations manually in excel there after given the input to the system through accounting interface. You can try with your abaper. Plz make sure that GL code length and currency .This has been done through so much work around. Technical person will guide you .If you still facing the problem where exactly your facing then i can help you out.Please be more clear what you did till now then only i can explain you with clarity.
Regards,
Suma.

Unable to select multiple with holding tax codes. -"This entry already exists in the following tables '' (ACPR) (ODBC -2035) [Message 131-183]"

Unable to select multiple with holding tax codes.
This entry already exists in the following tables '' (ACPR) (ODBC -2035) [Message 131-183]

Hi,
Actually this is an application error in 2007 A and there is no version/PL to fix this issue.
Refer SAP note 1260874 - Cannot add a new BP with ITW tax code
Thanks & Regards,
Nagarajan

With holding tax amount exceeds the cutomer/vendor line item amount 001

Hi Guru's,
I have an issue, is there any impact to change the withholding tax base amount 20% instead of 10%.When I change the base amount to 20% and post a document system return error message
"With holding tax amount exceeds the cutomer/vendor line item amount 001".Guide me on this issue.
And tell me the impact of previous open item documents.
Regards
Maruthi.

Thanks for all,
MY problem solved.
Regards
Maruthi

With Holding Tax provided in IDOC FIDCC2 is not getting updated in Acc Doc

Hi All,
I am Posting a Accounting document in R/3 though Idoc FIDCCP02.
This idoc has With holding Tax info segment as E1FIXWT. i gave all the info in this segment, like Tax code, Tax type , Withholding tax base amount (local currency) , Withholding tax base amount in document currency, Withholding tax amount (in local currencyand Withholding tax amount in document currency
However, when the Idoc gets posted,and the accounting document gets generated the With holding tab does not get populated in SAP.
Please let me know your inputs, that why the woth holding tab is not getting populated with the relevant info from Idoc.
Thanks in advance

Hi,
I have the same issue. But as the idoc is generated in a SAP system of the same release I would have expected that the withholding tax data is already complete. Also are no withholding tax info populated in IT_ACCTX. There only VAT is visible. I suppose IT_ACCWT was meant.
Anyone any idea?
Regards
Stefanie

India -With Holding Tax - Changes As per the Budget Approval

Dear All
Many of you are aware, there will not be any surcharge, education & higher education cess for with holding tax in Indai from 01.10.2009.
Our client is operating seperate tax codes for Basic Duty, Surcharge and Education Cess. We have change the configuration and maintained 0% in the formula for calculating with holding tax for surcharge and education cessand we have maintained with the validity from 01.10.2009
(ie., The above solution we thought because, we wish to maintain the same tax code and with out modifying the vendor master)
Now, the system is working fine for all the scenarios, except the transfer of the old advances from special gl indicator to normal line item through T.Code (F-54). Under this T-code, the system is reversing only basic duty at old rates with out surcharge and cess.
Kindly suggest the solution to reverse the surcharge and cess while doing F-54 with the posting dates as 01.10.2009 onwards
Regards
Anilkumar

Please go through the SAP note 1359268 for budget changes
also see the 1369775,1371380,1372734 for your exact requirement

With holding tax

Hi,
If i select With holding tab when entering Down payment request,Down payment and invoice for vendor, i am getting error message as Withholding Tax information missing from line item
Could you advise me where i made wrong cogfiguration for with holding tax.
Your immediate response will be highly appreciated.
With regards,
V.K

Hi
Check Feild status group of G067 in OB14 and make sure that these are optional and also the Feild status group of WHT GL accounts you have assigned.
There is always a possibility that these are in suppressed state.
Award points if useful.
sarma

How to caculate with holding tax using vendor number

Dear All,
I need to calculate and simulate the with holding tax amount before the FI document post. input should be the vendor number fisical year and the company code and the with hoding tax base abount. plz help me to do this
regard
nawa

Hello,
For a record in BBSEG you can have multiple records in the data file which corresponds to Structure BWITH which allows more than one value for field WT_WITHCD. For ex:
BBKPF
Field1      Field2
a     bb
x     yy
BBSEG
Field1      Field2     Field3
a     bb     ccc
x     yy     zzz
BWITH
Field1      Field2     Field3     WT_WITHCD
a     bb     ccc     WT_WITHCD1
a     bb     ccc     WT_WITHCD2
a     bb     ccc     WT_WITHCD3
x     yy     zzz     WT_WITHCD7
x     yy     zzz     WT_WITHCD8
x     yy     zzz     WT_WITHCD9
Hope this gives you some help to proceed further.
Best Regards, Murugesh AS

Regarding With holding tax with CIN version

Similar Messages

Maybe you are looking for