Regaring error when installing oracle 10g on redhat linux4 on vmware

hi can any body help me with this error
when i run the runInstaller
it run the prerequsits and
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-12-24_01-06-17PM. Please wait ...[oracle10g@system3 oracle10g]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
thanks
Edited by: user9971259 on 24-Dec-2010 05:38

Welcome to the forums !
Pl post exact details of OS and database versions. This error indicates that all pre-requisites for your install have not been met - the Install guide for your specific version of database can be found at http://docs.oracle.com
Pl use the search feature to find many previous discussions on this topic - http://forums.oracle.com/forums/search.jspa?threadID=&q=xlib+AND+connection+AND+refused+AND+server&objID=f64&dateRange=thisyear&userID=&numResults=15
HTH
Srini

Similar Messages

Error while installing oracle 10g in redhat Server

Hi experts,
I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
when Try to start the listener the following error comes.
Tns-12537:TNS:Connection closed
Tns-12560:TNS:PROTOCOL ADAPTER ERROR
Tns-00507:TNS:Connection closed
Linux error 29:illegal Seek.
Please help me

Thanks for the answer it was helpful and i successfully started the oracle database.
and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
imp userid=username/password@servicename file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Gives ORA-12560: TNS: protocol adapter error when installing oracle 10g

I tried to install oracle 10g r2 in server 2008. but it gives ORA-12560: TNS: protocol adapter error when installing. how I can fix this issue??? please help me ASAP. because its urgent.
thanks in advance.
chamara

Welcome to the forums !
Pl indicate which version of 10g you are installing and on which version of Win 2008. Neither 10gR1 nor 10gR2 are certified to be installed on Win 2008 R1, AFAIK.
For 10gR2, only 10.2.0.5 is certified for Win 2008 R2 - see MOS Doc 1173433.1 (How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2)
Also see MOS Doc 740926.1 (Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008R1?).
Both 10gR1 and 10gR2 are now in extended support - is there a reason you are not using 11gR2 ?
HTH
Srini

ACL Error when install Oracle 10G on Windows XP

I tried to install Oracle 10G Personal Edition on my Windows XP box. I see the following error in the log file:
INFO: Calling Action w32OcxRegActions10.2.0.0.0 RegisterOCX
OcxPath = C:\oracle\product\10.2.0\db_1\oraconfig\oraconfigps10.dll
WorkingDir = C:\oracle\product\10.2.0\db_1\oraconfig
INFO: Calling Action SpawnActions10.1.0.2.0 Spawn
installcommand = "C:\oracle\product\10.2.0\db_1\oraconfig\ocfgperm" -aa {A1F205B4-4418-11D2-B2F1-00805FC19E2E} set ORA_DBA permit
deinstallcommand = null
WaitForCompletion = true
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: ERROR: Cannot add user to application access ACL.
No mapping between account names and security IDs was done.(534)
INFO: End output from spawned process.
In addition if I try to create a DB later via command line or via the DB Config tool I get all these windows dialogs popping up saying: "Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience."
Any ideas what might be wrong with my installation?
David

Hi David,
i got the same error on a Windows 2003 Server. At this time no password was set for the Administraor account!.
After setting a password for the Administraor i could install the SW withaout any Problem!
Rudi

Perl error when installing Oracle 10g in a Window XP

After I install Oracle Enterprise Manager 10g Grid Control in a Window XP SP2 environment, and appears the next message: "perl.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
And in some logs appears Errors, like in OC4J~OC4J_EM~default_island~1:
08/04/30 11:46:03      at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
08/04/30 11:46:03      at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
08/04/30 11:46:03      at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)
between other errors in other logs.
I need to configure the snmp agent and subagent, but it doesnt work correctly :(
If someone can help me with this problems please I will so thank.
Gabriela

Hi,
As you are new I would like to explain you more. First please confirm whether you have Oracle support. Metalink can be accessed only when you have oracle support.
Regards
Mudhalvan M.M

Error when installing oracle 10g on OEL4..(oracle enterprise linux )

Hi everyone,
i am getting this error when i run ./runInstaller
[oracle@localhost database]$ ./runInstaller
./runInstaller: line 52: /root/Desktop/10201_database_linux32/database/install/.oui: Permission denied
But it has all the permissions (read,write,execute) for owner,groups,others.Do i have to give any more permissions.
File owner of that file : oracle
file group: oinstall
i used the following commands when i created the groups.
/usr/bin/groupadd oinstall
/usr/bin/groupadd dba
/usr/bin/ useradd-m-g oinstall -G dba oracle
what more permissions do i have to give to that ./runInstaller.
please helpme
sandeep

hi everyone,
Please help me.I am not able to figure out what am i doing wrong.I am getting the permission denied error when i am running the ./runinstaller.But it has all the read,write execute permissions
[root@localhost ~]# ls -ltr
total 120
-rw-r--r-- 1 root root 32283 Jan 3 18:36 install.log.syslog
-rw-r--r-- 1 root root 57519 Jan 3 18:36 install.log
-rw-r--r-- 1 root root 1446 Jan 3 18:36 anaconda-ks.cfg
drwxrwxrwx 3 oracle oinstall 4096 Jan 3 21:40 Desktop
[root@localhost ~]# su oracle
[oracle@localhost root]$ ls -ltr
ls: .: Permission denied
[oracle@localhost root]$ cd Desktop
bash: cd: Desktop: Permission denied
[oracle@localhost root]$ exit
[root@localhost ~]# cd Desktop
[root@localhost Desktop]# su oracle
[oracle@localhost Desktop]$ ls
10201_database_linux32
[oracle@localhost Desktop]$ ls -ltr
total 8
drwxrwxrwx 3 oracle oinstall 4096 Jan 3 21:38 10201_database_linux32
[oracle@localhost Desktop]$ cd 10201_database_linux32/
[oracle@localhost 10201_database_linux32]$ cd database/
[oracle@localhost database]$ ls -ltr
total 52
drwxrwxrwx 9 oracle oinstall 4096 Jan 3 21:38 doc
-rwxrwxrwx 1 oracle oinstall 1327 Jan 3 21:38 runInstaller
drwxrwxrwx 2 oracle oinstall 4096 Jan 3 21:38 response
drwxrwxrwx 5 oracle oinstall 4096 Jan 3 21:38 install
-rwxrwxrwx 1 oracle oinstall 5213 Jan 3 21:40 welcome.html
drwxrwxrwx 9 oracle oinstall 4096 Jan 3 21:40 stage
[oracle@localhost database]$ ./runInstaller
./runInstaller: line 52: /root/Desktop/10201_database_linux32/database/install/.oui: Permission denied
Please tell me what shall i do to run the installer.pleaseeeeee
thanks
sandeep

Installing Oracle 10g db on Linux4 on VMWare Workstation

Checking Network Configuration Settings................ Warning
Check complete: The overall result of this check is : Failed <<<<
Problem: The install has detected that the primary ip address of the system is DHCP-assaigned
REcommendation: ORacle supports installations on systems with DHCP-assigned public IP address. However the primary interface on the system should be configured with a static IP address in order for the Oracle Software to funtion properly.
I want to install O10g on Linux on VMware and I need to work on it.
Please suggest me how can I proceed further........
Thanks in advance..............Lakshman

LaskhmanK wrote:
Checking Network Configuration Settings................ Warning
Check complete: The overall result of this check is : Failed <<<<
Problem: The install has detected that the primary ip address of the system is DHCP-assaigned
REcommendation: ORacle supports installations on systems with DHCP-assigned public IP address. However the primary interface on the system should be configured with a static IP address in order for the Oracle Software to funtion properly.
I want to install O10g on Linux on VMware and I need to work on it.
Please suggest me how can I proceed further........The usual approach I would use is to read the message and take the recommended action.
In this case it says "However the primary interface on the system should be configured with a static IP address", so I would probably take that action.
As far as I know there is no Distro called 'Linux4'. Once you identify the distro properly, you might get an explanation of the basic steps to do network admin on the box. If that distro is some variant on Red Hat, you could use the CentOS docs at http://centos.org/docs/4/ , in particular Section IV.

Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit

I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.

865231 wrote:
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration.

Error while installing Oracle 10g on Solaris 9 x86

Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
Alex

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Error message when installing Oracle 10g on Windows XP Professional

Hello,
I need help installing oracle 10g database. When I attempt to run the installation from the setup.exe icon, I get a message that says
"Error in writing to directory C:\Documents and Settings\Owner\Local Settings\Temp\OraInstall2007-04-29_01-19-29PM. Please ensure this directory is writable and has atleast 45Mb of disk space. Installation cannot continue."
When I try to open the installation from the Autorun icon, it points to an innability to find setup.exe and when I go back to Setup.exe, it gives me the above error. Everytime I try to run the installation and it fails, the installation leaves a folder in my Temp folder with the above format. Any help would be appreciated. Thank you.

I do have administrative privilege on my computer and I have plenty of space. I have 80gb of free space. What do I do to successfully install the software without incurring those messages I displayed in my first thread?

Error while installing oracle 10g on centos 5.6 32 Bit

Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.

satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail.

Regaring error when installing oracle 10g on redhat linux4 on vmware

Similar Messages

Maybe you are looking for