Regd new Valuetype

Hi Gurus,
For Value type in BW we have 10-Actual 20-Plan 60 Forecast.
Our client has some adjustments to be carried out and hence we intend to have actual adjustment -11 and plan adjustment as 21.
We know by  Note 523742 - BCT-CO: BW key figure model and R/3 tables for trans. data that the actual R/3 values are different like 1- plan 4- target etc. There are conversion routines on COSP and COSS tables to convert the data on BW.
Can we add our new types and change the conversion exits.
Cheers

any idea?

Similar Messages

  • Regd New BI 7.0 Implementation

    Hi All,
    I have been working on BW 3.1and 3.5. Now we are supposed to start off a new project on BI7.0. Can any body please suggest the methodology to start off the project from business content installation and the major diff' from other verisons . also a list of do's and do not's.
    Regards

    Hi
    These are the links to BW 7.0 Release
    Re: BW 7.0 Release
    BI 7.0 would be released as part of NW 2004s in June 2006. You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
    SAP Business Warehouse
    Re: BW 7.0 Release
    Re: BW 7.0 Release
    Re: BW 7.0
    This will help U to find the diff between versions
    Regards
    Ajay

  • SLD objects transport....

    Hi Experts,
        I hav a qs...can we transport BS,TS,LS from the SLD of a XI system( it may be Dev or Qua) to the SLD of  another XI system (a sandbox) which is not in the same landscape....If it is possible thn pls can anyone provide me step by step guide...
    Regds,
    New XI..

    Hi,
    Either you need to manually export SLD objects from the first SLD and import that in second SLD.
    Or You can transport the SLD objects by SLD transports...
    have you check -
    https://websmp210.sap-ag.de/~sapidb/011000358700000315022005E.PDF
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    Thanks
    Swarup

  • New JRC version of eclipse thraw ValueType exception.

    new JRC version of eclipse thraw ValueType exception when connecting to a table in MySQL data base  which includs a column of type bit('0') == boolean.
    the previous version des not have any problem with kind of type.
    what should i do?

    what you are trying to say? is this a known issue? does it work at all.
    exception:
    11:04:20:270 [ERROR] JRCCommunicationAdapter:  detected an exception: Unexpected ValueType
            at com.crystaldecisions.reports.common.Utils.a(Unknown Source)
            at com.crystaldecisions.reports.common.Utils.a(Unknown Source)
            at com.businessobjects.reports.sdk.builder.ConnectionDatabaseBuilder.a(Unknown Source)
            at com.businessobjects.reports.sdk.builder.ConnectionDatabaseBuilder.a(Unknown Source)
            at com.businessobjects.reports.sdk.builder.EROMDatabaseBuilder.a(Unknown Source)
            at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
            at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
            at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
            at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ds.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.an.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.b0.if(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.b0.b(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.bb.int(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.performDo(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.DatabaseController.byte(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
            at org.t2k.web.reports.CRJavaHelper.changeDataSource(CRJavaHelper.java:200)
            at org.t2k.web.reports.CRJavaHelper.changeDataSource(CRJavaHelper.java:83)
            at org.apache.jsp.basic_jsp._jspService(basic_jsp.java:71)
            at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
            at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
            at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
            at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
            at org.t2k.web.filters.AddDomainPropertyFilter.doFilter(AddDomainPropertyFilter.java:46)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
            at org.t2k.web.filters.UtfFilter.doFilter(UtfFilter.java:22)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
            at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
            at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
            at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
            at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
            at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
            at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
            at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
            at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
            at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
            at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
            at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
            at java.lang.Thread.run(Thread.java:595)
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unexpected ValueType---- Error code:-2147467259 Error code name:failed
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
            at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
            at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
            at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ds.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.an.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.b0.if(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.b0.b(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.bb.int(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.performDo(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.DatabaseController.byte(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
            at org.t2k.web.reports.CRJavaHelper.changeDataSource(CRJavaHelper.java:200)
            at org.t2k.web.reports.CRJavaHelper.changeDataSource(CRJavaHelper.java:83)
            at org.apache.jsp.basic_jsp._jspService(basic_jsp.java:71)
            at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
            at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
            at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
            at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
            at org.t2k.web.filters.AddDomainPropertyFilter.doFilter(AddDomainPropertyFilter.java:46)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
            at org.t2k.web.filters.UtfFilter.doFilter(UtfFilter.java:22)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
            at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
            at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
            at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
            at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
            at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
            at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
            at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
            at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
            at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
            at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
            at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
            at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.IllegalArgumentException: Unexpected ValueType
            at com.crystaldecisions.reports.common.Utils.a(Unknown Source)
            at com.crystaldecisions.reports.common.Utils.a(Unknown Source)
            at com.businessobjects.reports.sdk.builder.ConnectionDatabaseBuilder.a(Unknown Source)
            at com.businessobjects.reports.sdk.builder.ConnectionDatabaseBuilder.a(Unknown Source)
            at com.businessobjects.reports.sdk.builder.EROMDatabaseBuilder.a(Unknown Source)
            at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
            ... 53 more

  • Regd Workflow for a new custom page

    HI ,
    We have created 2 pages for some functionality where in user can login n serach for a person and update certain attributes like his source/company, assignment category etc.
    First page he can searach the person and after search results come in, he can click on a link and go to the next page where he can edit the attributes n submit.
    Now after updating and submitting the page, we have a reqt to send notifications to the initiator in case the user has approved the txn or rejected or sent for correction. But we dont know how to achive it with the 2 pages n no workflow.
    How to launch a workflow for this ?
    or is there a way we can send notification from backend without using workflow n it shud still come in the worklist of a person.
    Regards,
    Preeti

    Hi Preeti
    DECLARE
    l_itemtype VARCHAR2(30) := 'XX_TEST';
    l_itemkey VARCHAR2(300) := 'TEST';
    BEGIN
    Begin
    wf_engine.createprocess(l_itemtype, l_itemkey, 'XX_MAIN_TEST');
    Exception
    when others then
    dbms_output.put_line('Error in create process:' sqlerrm);
    End;
    BEGIN
    wf_engine.setitemuserkey(itemtype => l_itemtype
    ,itemkey => l_itemkey
    ,userkey => 'USERKEY: ' l_itemkey);
    EXCEPTION
    when others then
    dbms_output.put_line('Error in set userkey process:' sqlerrm);
    END;
    BEGIN
    wf_engine.setitemowner(itemtype => l_itemtype
    ,itemkey => l_itemkey
    ,owner => 'SYSADMIN');
    EXCEPTION
    when others then
    dbms_output.put_line('Error in set owner process:' sqlerrm);
    END;
    BEGIN
    wf_engine.startprocess(l_itemtype, l_itemkey);
    dbms_output.put_line('Process started');
    commit;
    EXCEPTION
    when others then
    dbms_output.put_line('Error in set owner process:' sqlerrm);
    END;
    END;These are the details of the functions used
    1> wf_engine.createprocess
    This API creates a new runtime instance of the workflow process, Pass the item type and item key for the workflow.
    2> wf_engine.setitemuserkey
    Use this API to mark the new runtime instance of the workflow process with an
    end–user key
    3> wf_engine.SetItemAttrText
    Use this API to set values for the item type attributes defined for workflow process .E.g.: Email ID, Description defined in the workflow.
    4> wf_engine.setitemowner
    Use this API to set the value of owner (Of Workflow)
    5> wf_core.context
    In case of exception, it will help in locating source of an error.
    6> wf_engine.startprocess
    Use this API to invoke the workflow for the item type and item key specified.
    Ajay

  • Regd creation of New Sales Order Type - Credit Memo Request

    Hello Gurus,
    I have created a New Sales Order Type as per the given requirements. This is a Credit Memo Request. I have done all that are needed from SD perspective.
    Can you please let me know what needs to be done from FI-CO perspective when a New Sales Order Type is created and this is a Credit Memo Request. If some one can let me know the customizations that needs to be done it will be very helpful for me.
    Thanks,
    SNK.

    Hi,
    As per my understanding, there is nothing to be required from FI-CO perspective, in case when you defined a document type in SD.
    During the sales order processing the SD-FI interface happenes for following activities
    1) Credit check (In case you use Credt management)
    2) Tax determination
    For more knowledge
    go through the link given below.
    http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
    Hope it helps,
    Regards,
    MT

  • Regd import statement - -added new question here

    Hi ,
    I have developed a standalone page .. n now trying to import that into database ...
    import C:\JDEV9i-03\jdevhome\jdev\myprojects\cisco\oracle\apps\per\workscape\webui\WorkscapeUI.xml -rootdir C:\JDEV9i-03\jdevhome\jdev\myprojects\ -userId 1 -username apps -password cR8nm0r3 -dbconnection "(description = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(host =hrdev-db.cisco.com)(port = 1548)))(connect_data = (sid = HRDEV)))"
    After importing it shows ,,,,
    Importing /cisco/oracle/apps/per/workscape/webui/WorkScapeUI
    Import completed.
    But when I run the jdr_utils package to see whether page is imported or not ..
    begin
    JDR_UTILS.printdocument('/cisco/oracle/apps/per/workscape/webui/WorkscapeUI');
    end;
    I get the following output ..
    Error: Could not find path /cisco/oracle/apps/per/workscape/webui/WorkscapeUI
    Please help on the same !!
    Regards,
    Preeti
    Edited by: Preeti2 on Sep 2, 2008 1:10 AM
    Edited by: Preeti2 on Sep 2, 2008 4:48 AM

    Hi,
    I'm having similar problem.
    I ran the following and the import succeeded.
    C:\jdevinstall\jdevbin\jdev\bin\import C:\javawork\jdev\myprojects\gsi\oracle\apps\xxcust\projects\contracts\webui\VWFContractsSearchPG.xml -rootdir C:\javawork\jdev\myprojects\gsi\oracle\apps\xxcust\projects\contracts\webui -username apps -password xxxx -dbconnection "(description = (address_list = (address = (protocol = tcp)(host = orarh303.gs-inc.com)(port = 1521)))(connect_data = (sid = TEST)))"
    Importing /VWFContractsSearchPG
    Import completed.
    But when I run the below I get a message.
    exec jdr_utils.printDocument('/gsi/oracle/apps/xxcust/projects/contracts/webui/VWFContractsSearchPG');
    Error: Could not find document /gsi/oracle/apps/xxcust/projects/contracts/webui/VWFContractsSearchPG
    PL/SQL procedure successfully completed.
    Can you let me know?
    Thanks

  • Creation of new field in Web Page

    Hi All,
    i am new in SAP CRM 2007. i wanted to add one field therefore i went to EEWB and try to create one extension. In extension i have enter all fields like Name, Description, EEW Bus. Object and Extension Type when i click on continue system is giving error that is "No request was sent" (No request was sent through the interface).
    please tell me how to solve this error???
    Thanks & Regards,
    RAJ

    Hi Raj,
    Check if you have followed the below steps:
    -While creating new project in EEWB you Need to enter existing package then you will get transport request Dialog box .
    -Click on create on continue which will then create the project.
    -Then right click on Project create extesion.You must select EEW Bus Object and Extension Type Header or Item level.
    -Then you will get the Wizzard and assign Transaction TYpe while proceeding in Wizzard.
    -In define field you must maintain the data type i.e Character or check box
    -In assign field must check header or Item and assign the subbobject and continue.
    It may take some time but will create a new field.
    Regds
    Arup

  • Help adding new WLC to existing ACS

    Hi All,
    I need help with this.
    This network has a working WLC that authenticates wireless users against an ACS by MAC address. It works fine.
    I need to add a new WLC.
    I added the WLC, the APs connect to the WLC fine, but the users get limited connectivity and we've found out that is because the new WLC is getting authentication errors against the ACS.
    The configuration of the new WLC is exactly the same as the current working WLC and both controllers show as AAA clients on the ACS.
    I want to know if somebody can point me out in the right direction to solve this.
    There's connectivity fine between all devices (as far as PING goes), and there's no Firewall or filters in between.
    The difference I see on both WLCs is that on the working one (WLC1), under Security - AP Policies, we see the AP Authorization List with the MAC addresses/cert type/hash.  We don't get this information on the non-working WLC (attached document shows both)
    Also in the attached document, I'm sending the errors I get no the WLC2 controller.
    Any help is greatly appreciated.
    Federico.

    Federico,
    I didn't get you when you say that you see only One WLC under groupsetup/Mac address. Could you please elaborate this?
    Also, if you don't know see any NAR configured under shared profile component then check inside the group/user setup there must be either ip based or CLI/DNIS based NAR configured for WLC's and looking at failed attempts it seem that action is denied.
    HTH
    Regds,
    JK
    Do rate helpful posts-

  • I am trying to create a new ods ?

    hi all,
    Can anyone help me out. i am trying to create a new ods.
    Where in i have characteristics and keyfigures.
    In ods we have - data fields / key fields.
    1. can data fields can contain characteristics and keyfigures
    2. can key fields can contain key figures as well characteristics?
    In which scenario should characteristics should be included in the key fields.
    If u have any docs abt ods send it acrros to my email id [email protected]
    regds
    haritha

    Hi Haritha,
         for your first question... YES , You can take charecterstics as  Data fields.. and you can create ODS... 
         but  for your second question  , NO, You can't take  key figures as  key fields..
    because.. the example..  Charecterstics means.. on charecterstics based only we are analysis the reports... so, on which based you want report.. suppose for example.. EMPLOY NUMBER based on  you want you can take.. that  EMP id as  KEY FIELDS.. otherwise.. you  want to see the report  on DEPT ID wise..  you can take.. that Dept Id as  key fields.. and then Emp ID you can take as   Data field ...
        so,  completely based on your reporting requirement you can put charecterstics as keyfields  or datafields...
    but ..  key figures means.. performance indicators.. these always you need to take as   datafields only..
    regards
    @jay..

  • Blank Screen after selecting a role within the new WebClient User Interface

    Hi,
    I have another Problem with the new UI.
    I did all steps as described within the Best Practice Guide for the new Web Client (C04). I used this guide to set up our CRM 2007 System.
    Unfortunately no matter what I do after selecting the appropriate role after logging on to the system I only get a blank screen and nothin else happens. Even changes to the navigation frame have no effect.
    If I do not assign a business role I get at least this error. But after doing this I allways got a blank screen no matter what I change in customizing.
    Does anyone have any clues where the error might lie?
    Best Regards
    Christian

    Hi Christian,
    Could you please share me your experience how you resolved this issue?
    We are at the clients place facing the same problem. After logging in it is asking to select business roles like salespro,marketpro....etc...but after selecting this role we are getting blank white screen in the browser with  URl- http://*******.**.com:8030/sap/bc/bsp/sap/crm_ui_frame/default.htm?sap-client=150&sap-sessioncmd=open
    We have followed the latest 2007 Best Practice where we have assigned the roles to user like : SAP_CRM_UIIU_FRAMEWORK
    SAP_CRM_OR_ADMIN
    SAP_CRM_OR_USER
    BP_POWERUSER
    In best practice 5.2 this role was assigned through Org Model where as in 2007 first it guides us to get the WebClient and then asking us to create Org Model.
    you had mentioned that you got rectified through  local server settings on OS level. Can you please help in explaining what exactly you did to rectify the DNS setting????
    Any other solution most welcome
    Regds...Arup

  • How to create a new value for template classification??

    I want to classify a workflow template, I mean I will not classify my template as a general task. Using TA PFTC_CHG I get a list with all the entries that a customized in my system. My question is how to create a new entry in that list? System is 46C.
    thanks in advance for any hints
    Jochen Winler

    Hi Jochen,
    Follow the customiztion path:
    SAP Web Application server->Business Mgmt->SAP Business WF->Basic Settings->Maintain task classes
    (For 4.6c the path is:
    Basis Components->Business Mgmt->SAP Business WF->Basic Settings->Maintain task classes)
    By this you can maintain task class entry as you required.
    Hope this helps.
    Pls. close the thread once your problem is solved.
    Regds,
    Akshay Bhagwat
    Note: Pls. reward with points if it helps:)
    Message was edited by: Akshay Bhagwat
    Message was edited by: Akshay Bhagwat

  • How to add a new server to the grid control

    Hi ,
    OEM 10g grid control has already bee installed n our site . But I don't know how a add /configure a new sever / database into that . Do I need to install the agent software on the destination machine OR is there any way to add the new sever from the 10g grid control itself ... Please help me out . You can also revert me back on my id [email protected]
    redgs
    RAHUL

    thnx for replying .
    Could you please tell me the patch number that I need to download for OEM grid control 10.2.0.3 . Actually I searched for lot of docs . But didn't found doc regarding installation of oem agent and agent PATCH number .
    So , Please revert back with necessary Patch number and all the steps that I need to be follow . Thanx in advance
    regds
    RAHUL

  • Need to add a new release of the segment and maintain that version

    Hi All,
    I want to add one field in the Z segment type using WE31.But i am getting the error message as
    'Current segment definition <segment name> can no longer be changed and The current segment definition
    is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
    The current segment defenition which i am trying to change got the SAP release of 4.6C. But the system has upgraded to Ecc6 recently.
    I tried going to the edit menu and cancel the release, but still it is not allowing.
    Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
    I suggested by that
    *You can only edit segments in the current release. You will need to add a new release of the segment and maintain that version with changes. *
    If this is right then
    How to do this settings
    regards,

    'Add version' use this option - a new version will be created in the current release.
    then add your field to that and relase it again.
    Regds,

  • Regd: Converting Data in XML file

    Hi All,
    We hav a requirement to convert the data from Internal table into a XML file.
    The scenario is we hav developed a program to download the data in XML format,the problem is when the file is converted inot XML format its giving erreor that
    <b>The XML page cannot be displayed
    End tag 'KUN' does not match the start tag 'KUNNR'. Error processing resource 'file:///C:/TEST.xml'. Line 2, Position 1712
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0"><asx:values><IT_XML_OUT><item><VBE...</b>
    The code is specified below for understanding.
       TBALES DECLARATION
    TABLES:  VBAK, "Sale Order Header
             VBAP, "Sale Order Item Data
             VBEP, "Schedule Line Data
             KNA1, "General Data in Customer Master
             VBRP. "Billing Document Item Data
       TYPES DECLARATION
    TYPES : BEGIN OF TY_SOSTATUS,
              KUNNR    LIKE VBAK-KUNNR,  "Customer Number
              NAME1    LIKE KNA1-NAME1,  "Customer Name
              BSTNK    LIKE VBAK-BSTNK,  "Customer P.O.
              BSTDK    LIKE VBAK-BSTDK,  "Customer P.O. Date
              VBELN    LIKE VBAK-VBELN,  "Sale Order Number
              ERDAT    LIKE VBAK-ERDAT,  "Sale Order Date
              POSNR    LIKE VBAP-POSNR,  "Sale Order Line Item
              MATNR    LIKE VBAP-MATNR,  "Material Number
              ARKTX    LIKE VBAP-ARKTX,  "Material Description
              KWMENG   LIKE VBAP-KWMENG, "Sale Order Quantity
              VRKME    LIKE VBAP-VRKME,  "Unit of Measurement
              EDATU    LIKE VBEP-EDATU,  "Sale Order Schedule Date
              FKIMG    LIKE VBRP-FKIMG,  "Despatch Quantity
              GBSTA    LIKE VBUP-GBSTA,  "Overall Sale Order Status
              PNDQTY TYPE I,
    END OF TY_SOSTATUS.
    TYPES : BEGIN OF TEMP_DISP,
              VBELN    LIKE VBAK-VBELN,
              AUART    LIKE VBAK-AUART,
              ERDAT    LIKE VBAK-ERDAT,
              KUNNR    LIKE VBAK-KUNNR,
              BSTNK    LIKE VBAK-BSTNK,
              BSTDK    LIKE VBAK-BSTDK,
              POSNR    LIKE VBAP-POSNR,
              MATNR    LIKE VBAP-MATNR,
              ARKTX    LIKE VBAP-ARKTX,
              KWMENG   LIKE VBAP-KWMENG,
              VRKME    LIKE VBAP-VRKME,
    END OF TEMP_DISP.
    DATA: XML_OUT TYPE STRING.
       INTERNAL TABLE DECLARATION
    DATA : IT_SOSTATUS TYPE STANDARD TABLE OF TY_SOSTATUS
                WITH HEADER LINE INITIAL SIZE 100 WITH DEFAULT KEY.
    DATA : IT_TEMP TYPE STANDARD TABLE OF TEMP_DISP
                WITH HEADER LINE INITIAL SIZE 100 WITH DEFAULT KEY.
    DATA : BEGIN OF IT_XML_OUT  OCCURS 0,
           A(1500) TYPE C,
           END OF IT_XML_OUT.
       SELECTION SCREEN DECLARATION
    SELECTION-SCREEN  BEGIN OF BLOCK SOBLOCK WITH FRAME.
    SELECT-OPTIONS:   S_VBELN FOR VBAK-VBELN,
                      S_ERDAT FOR VBAK-ERDAT,
                      S_AUART  FOR VBAK-AUART,
                      S_WERKS FOR VBAP-WERKS.
    SELECTION-SCREEN  END OF BLOCK SOBLOCK.
       START OF SELECTION
    SELECT SVBELN SAUART SERDAT SKUNNR SBSTNK SBSTDK
           LPOSNR LMATNR LARKTX LKWMENG L~VRKME FROM VBAK AS S
                                                        INNER JOIN VBAP AS L
                                                        ON SVBELN = LVBELN
                                                        INTO CORRESPONDING FIELDS OF TABLE IT_TEMP
                                                        WHERE S~AUART IN S_AUART AND
                                                              S~ERDAT IN S_ERDAT AND
                                                              L~WERKS IN S_WERKS .
    CALL TRANSFORMATION (`ID`) SOURCE IT_XML_OUT = IT_TEMP[] RESULT XML XML_OUT.
    CALL FUNCTION 'SOTR_SERV_STRING_TO_TABLE'
      EXPORTING
        TEXT                      = XML_OUT
      FLAG_NO_LINE_BREAKS       = 'X'
       LINE_LENGTH               = 65000
      LANGU                     = SY-LANGU
      TABLES
        TEXT_TAB                  = IT_XML_OUT[].
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    filetype = 'BIN'
    filename = 'C:\TEST.xml'
    TABLES
    data_tab = IT_XML_OUT[].
    Is there any other way to process this and download in XML format.
    Help and Suggestions will be much Appreciated.
    Thanks & Regds.
    Ramesh.

    Hi ramesh,
    1. itab --- > xml
    xml ---> itab.
    2. This program will do both.
    (just copy paste in new program)
    3.
    REPORT abc.
    DATA
    DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
    DATA : BEGIN OF itab OCCURS 0,
    a(100) TYPE c,
    END OF itab.
    DATA: xml_out TYPE string .
    DATA : BEGIN OF upl OCCURS 0,
    f(255) TYPE c,
    END OF upl.
    DATA: xmlupl TYPE string .
    FIRST PHASE
    FIRST PHASE
    FIRST PHASE
    Fetch Data
    SELECT * FROM t001 INTO TABLE t001.
    XML
    CALL TRANSFORMATION ('ID')
    SOURCE tab = t001[]
    RESULT XML xml_out.
    Convert to TABLE
    CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
    EXPORTING
    i_string = xml_out
    i_tabline_length = 100
    TABLES
    et_table = itab.
    Download
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    filetype = 'BIN'
    filename = 'd:\xx.xml'
    TABLES
    data_tab = itab.
    SECOND PHASE
    SECOND PHASE
    SECOND PHASE
    BREAK-POINT.
    REFRESH t001.
    CLEAR t001.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = 'D:\XX.XML'
    filetype = 'BIN'
    TABLES
    data_tab = upl.
    LOOP AT upl.
    CONCATENATE xmlupl upl-f INTO xmlupl.
    ENDLOOP.
    XML
    CALL TRANSFORMATION ('ID')
    SOURCE XML xmlupl
    RESULT tab = t001[]
    BREAK-POINT.
    regards,
    amit m.

Maybe you are looking for

  • Migration Assistant doesn't allow me to choose what drive.

    Well, I got my new computer. I tried to migrate a drive from my old computer using Migration Assistant. and it doesn't allow me to choose what drive. In my old computer I have 5 drives. The original HD (was 10GB, was replaced last year by a 40 GB) an

  • Applet Problems

    Hi all.... I wonder if anyone could give me any tips about call the following program from an applet? Basically i am going to send a dataset to this program from an applet and i want it to display the graph that is created... I realise i will have to

  • How to save as an older version in numbers for lion

    my mom just got a new macbook air. we are sharing files on dropbox and everytime she opens a numbers file it does an autosave and then i can't read it because i have numbers '08. is there no way to back save to an older version of numbers in lion? su

  • Dimension vs Detail Universe objects

    What are the pros and cons of creating Dimension vs Detail Universe objects? We have created our Universes with both types to logically group some dimension objects with details that can only be one value of it's associated dimension object. We have

  • Color of video looks extremely different (photo negative) after export

    After sending my footage (on my timeline) to Color, I changed the color in the Primary In, then added some Effects in the Color FX section. I added Exposure, Film Look, and Saturation. I edited each one of my clips (with the same settings as I mentio