Regional and Language Settings for Window and BEX Style
Hi All,
When I change the Regional and Language Settings for Windows, Standards and Formats value to English (USA) the standard Style for BEX is active. For instance, input-ready cell is bordered with blue. But when I switch to Turkish this style is not active.
Additionally, I have to change Style for each Workbook one by one. How can we adopt a style to every workbook.
Regards,
Lars,
This is a setting on the 'Defaults' tab in the User Profile. This can be set when a new user is set-up in SU01, or it can be changed by each user according to personal preference in SU3. I'm sure there is a system table where these settings are stored that could probably be edited for all users, if that is desired, but I don't know which table that would be off the top of my head.
Hope this helps...
Bob
Similar Messages
-
had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you! -
Advice required on optimal MTU and MSS settings for GRE and IPSEC connections
Hi,
We have 2 remote sites (Site A and Site B) which connect to our datacentres (DC) over IPSEC VPN and connect to each other over GRE tunnels.
We had some issues recently which we believe were MTU/MSS related (browsing web servers at one location not appearing correctly etc)
We got some advice from our Cisco partner and tweaked some settings but I'm still not convinced we have the optimal configuration - and we still have some problems I suspect may be MTU related. For example, from our DC (connected to Site A by IPSEC), we CANNOT browse to the webpage of the phone system hosted at Site A. Yet, we CAN browse to the webpage of the Site A phone system from Site B (connected over GRE)
Site A and Site B have two WAN internet circuits each - and each provider presents their circuit to us as ethernet.
Here are the relevant interface settings showing the currently configured MTU and MSS (both routers are configured the same way)
Can someone advise on what the optimal settings should be for our MTU and MSS values on the various interfaces or how we might best determine the values?
interface Tunnel1
description *** GRE Tunnel 1 to SiteB***
ip address [removed]
ip mtu 1400
ip tcp adjust-mss 1360
keepalive 30 3
tunnel source [removed]
tunnel destination [removed]
interface Tunnel2
description *** GRE Tunnel2 to SiteB***
ip address [removed]
ip mtu 1400
ip tcp adjust-mss 1360
keepalive 30 3
tunnel source [removed]
tunnel destination [removed]
interface GigabitEthernet0/0
description "WAN Connection to Provider1"
ip address [removed]
ip access-group firewall in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip inspect cbac out
ip virtual-reassembly in
crypto map cryptomap
interface GigabitEthernet0/1
description "Connection to LAN"
no ip address
ip flow ingress
ip flow egress
duplex auto
speed auto
interface GigabitEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address [removed]
ip access-group 100 in
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1320
interface GigabitEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 25
ip address [removed]
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1320
interface GigabitEthernet0/2
description "Connection to Provider2"
ip address [removed]
ip access-group firewall in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip inspect cbac out
ip virtual-reassembly in
duplex auto
speed auto
crypto map grecrypto
Thanks.Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
http://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/25885-pmtud-ipfrag.html -
Best Presets and Export Settings for GoPro and Iphone Footage?
Is there a good preset that will handle Iphone 4/4s/5 video footage (720P on the 4 and 1080P on the 4S/5), and My GoPro HD Hero2? I typically record on the GoPro in 1080 30FPs, or 720P 60FPS. I generally produce videos with both types of footage.
What about exporting the footage? I prefer max quality. I store files on PC, and typically upload to youtube ( I have no restrictions to length or size on YT)
Using Adobe Premiere Elements 10 W7 64bit, 8GB RAM, I7, NVS4200M, etc.
ThanksIphone won't edit http://forums.adobe.com/thread/881246
-and http://forums.adobe.com/thread/1011411?tstart=0
-and a fix http://forums.adobe.com/thread/934466
GoPro http://forums.adobe.com/message/4486784
-says Cineform WITH GoPro, to convert to other formats
-http://gopro.com/software-app/cineform-studio/
Importing Video http://forums.adobe.com/thread/1065281
Saving & Sharing http://forums.adobe.com/thread/1051093
Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685 -
Call/video not working between Cisco jabber for Windows and VCS control C40s
Hello,
I've been struggling with no luck how to make a call using Cisco Jabber for Windows 9.6.0 registered to CM 8.6.2 with intercluster ICT to another CM 8.6.2 where we have a VCS Control 7.0.2 via GK H225, and all C40s are registered as H.323.
The VCS has interworking between H323 and SIP, however not sure if there is any problem with that. Assuming it is ok, not sure either if I'm facing any interoperability issue because in my remote site I have C40 (H323 registered at VCS and SIP listening mode) and cisco jabber for windows which is SIP based.
If is not possible, would I be able to change my C40 from H323 to SIP at VCS, or have both H323/SIP registered at VCS? If so, will I need to change as well instead of GK I'll have to establish a SIP Trunk between the CM and VCS?
Another thing I do not believe either I would be able to have one VCS connected with two clusters, right?
I'm just trying to find a solution in case my current topology is not compatible, but feel free if you have any better idea to make it work.
Anyway here is what is happening:
When I make a call from my cisco jabber windows to C40 using alias number. The call is being redirected just fine to the C40 and it rings, however when someoene or the auto answer picks it up, the call dropped right away.
However, if I enabled the MTP in my CSF device, the call gets longer before dropping. I was even able to see my jabber " start video" turns green, before was grayed out all the time and the call dropped faster. I hear a fast busy tone.
I'm able to provide SDI traces, logs, diagnostic sip/h323 calls from VCS in order to know for sure if this is an incompatible issue or something I can workaround.
Let me know if someone of you are interested in read these logs or could point me on the right direction.
Thanks!Ok,
I have looked at both logs. I have to mentinon though that you didnt
provide the log that shows the h323 setup between cucm and the VCS. This
is most likely because the call originated from a different cucm than
the ones you provided the logs from.
The call would have orginated from the first cucm in the cucm group of
this trunk: Name=RL_TRUNK_VIDEO
The cucm ip will be : 10.252.53.10.
This is the VCS log that confirms where the h323 request originated
from:
pr 10 22:50:29 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:29,187"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="54000"
Received RAS PDU:
Having said that here is my analysis of the logs that you sent..
Jabber sent an INVITE to CUCM and advertised all the codecs (audio and
video it can support)..
Observer that Jabber says it doesnt support G729 anexB
21:55:16.576 |//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message
from 10.223.20.73 on port 54677 index 90661 with 2220 bytes:
[862370,NET]
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/TCP 10.223.20.73:54677;branch=z9hG4bK000029d3
From: "4122107" <sip:[email protected]>;tag=00059a3c78000011000070b0
-00000e65
To: <sip:[email protected]>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 11 Apr 2014 01:55:16 GMT
CSeq: 101 INVITE
User-Agent: Cisco-CSF/9.4.1
m=audio 19252 RTP/AVP 0 8 18 105 104 101
c=IN IP4 10.223.20.73
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:105 G7221/16000
a=fmtp:105 bitrate=24000
a=rtpmap:104 G7221/16000
a=fmtp:104 bitrate=32000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 28878 RTP/AVP 97
c=IN IP4 10.223.20.73
++++Now lets observer the capabilites exchange during h245 negotiation
between cucm and VCS++++
Here CUCM advertises its caps to VCS (afterreceiving caps from VCS)
Note that G729A, G729AB, G729 is all advertised..
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,017"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : terminalCapabilitySet
capabilityTableEntryNumber 2,
capability receiveAudioCapability :
g729wAnnexB : 6
capabilityTableEntryNumber 3,
capability receiveAudioCapability : g729AnnexAwAnnexB : 6
capabilityTableEntryNumber 4,
capability
receiveAudioCapability : g729 : 6
capabilityTableEntryNumber 5,
capability receiveAudioCapability :
g729AnnexA : 6
++++++
After doing MSD (master slave determination, we move to the OLC phas e..
Here we see that the far end..c40 wants to use G729AB for media++++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,783"
Module="network.h323" Level="DEBUG": Src-ip="10.224.114.11" Src-
port="11163"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
dataType audioData :
g729AnnexAwAnnexB : 20,
multiplexParameters
h2250LogicalChannelParameters :
+++Next VCS sends G729AB as the codec to use to CUCM+++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,784"
Module="network.h323" Level="DEBUG": Dst-ip="10.252.53.10" Dst-
port="45660"
Sending H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
dataType audioData :
g729AnnexAwAnnexB : 20,
multiplexParameters
h2250LogicalChannelParameters :
++++The next thing we get is an OLC reject from CUCM and this is where
th call drops++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= response : openLogicalChannelReject :
forwardLogicalChannelNumber 1,
cause dataTypeNotSupported : NULL
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="INFO": Dst-ip="10.224.114.11" Dst-
port="11163"
Detail="Sending H.245 OpenLogicalChannelRejResponse
+++We then receive a call release from cucm with cause code of 47:
resource unavailable++++
Apr 10 22:50:32 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:32,365"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="50913"
Received H.225 PDU:
Q931
Message Type: Release
Complete
Call reference flag: Message sent from originating side
Call reference value: 0x7b
Info Element : Cause
Location: Usr
Cause Value: Resource unavailable
Info Element : User User
Length = 22
Suggestions:
Change the region setting between the ICT trunk to VCS and Jabber to use
G711 and test again. -
Can I use the same serial number for windows and mac?
Hi
I brought the Adobe Creative Suite 6 DesignandWeb Premium for windows and have been using fine on my PC. I now want to by a MAC laptop - can I use the same serial number and just go online for the MAC version download?Swap Windows <-> Mac http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l
-
What are the settings for datasource and infopackage for flat file loading
hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumarLoading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets. -
Make Flash Plug-In for Firefox Remember Privacy Settings for Camera and Mic Access on Local File
My company is using Flash Player to develop some kiosk-style applications to run on a standalone computer (no network connection). This computer will contain web pages containing Flash content. They will be opened from the local HD with Firefox with the Adobe Flash plug-in (v11.7.700.224). One of the applications accesses the microphone hooked up to the computer. When this application is started, it always asks for permission for "local" to access the microphone and camera. In previous versions of our system, we could click "Remember" if we did it once and that would make it so it wouldn't ask for permissions again (in this case, the Remember option isn't available, and the site settings don't even offer the Privace tab). However, in the previous case, we were running IE with a previous ActiveX Flash version (unfortunately, this approach is no longer available as we have had to switch to Windows 8 and that changes the game with IE and Flash entirely).
At this point, we have tried to use the Global Settings for "Camera and Microphone Settings by Site..." to enter "Local" as an always allowed site. This does not seem to have any effect. We also tried entering the root directory of the applications in "Trusted Location Settings", but that also seemed to have no effect.
I'm not sure what has fundamentally changed here. I think there might be some differences in the Plug-In version (compared to ActiveX), but I'm not sure what they might be or how to do the same thing as before.
Any help would be appreciated. Thanks in advance.
TorreyChris,
We learned that the Privacy tab (in Settings) can be found under the Flash plug-in for Firefox, but only if Firefox is running under an administrator.
Unfortunately, we haven't had much luck with the mms.cfg file. The following was used in the mms.cfg file (placed in both the %WINDIR%\SysWow64\Macromed\Flash and %WINDIR%\System32\Macromed\Flash” directories):
AVHardwareDisable = 0
AVHardwareEnabledDomain = local
AVHardwareEnabledDomain = 127.0.0.1
AVHardwareEnabledDomain = localhost
AutoUpdateDisable = 1
The AVHardwareEnabledDomain settings seem to be getting ignored regardless of whether the user is a standard user or an administrator. I also checked to make sure it wasn't just a local problem by going to a website that uses a microphone (http://www.testden.com/accent-reduction/systemcheck.htm). Adding the requested domain to the list (AVHardwareEnabledDomain = train.act360.com) still didn't bypass the allow/deny dialog box.
We know that the mms.cfg file is being read because setting "AVHardwareDisable = 1" will result in no prompt and that section being greyed out in Global Settings. I saw a post that suggested this setting was required to even make the AVHardwareEnabledDomain work, but it seems to block the local entirely and still brings up the dialog query on the internet site.
Thanks,
Torrey -
CS 6 Design and Web Premium for Windows - convert to Mac compatible version?
Hi
I bought CS 6 Design and Web Premium for Windows. I now have an iMac. Please advise on how I get the Mac version.
ThanksOrder product | Platform, language swap
-
Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium -
Language codes for 'english' and 'english-2' must differ?
I am trying to build my project but as I do I get the following pop up: Compiler: Language codes for 'english' and 'english-2' must differ. What do I need to change?
You have added a language to your project which you don't need. Look in the outline view at the bottom for the folder called langauges, then delete the second one. Both will be English and this cannot be the case on a DVD - the player will not know which assets to use on a menu if there are two langauges the same.
The languages are used when you want to create a disc that will display the correct menu backgrounds when used in players in different countries - the DVD player settings will have a language set up, and the DVD will use the appropriate language files to construct the menus accordingly. -
Hello, I've got a Upgrade-Version of CS5.5 for Windows and changed to a Mac. Now I need the Mac-Version. I tried to install the Download from Adobe. Unfortunatly it didn't accept my password. I guess cause of the Upgrade-Version or the Windows Version I own. My System: Mac OS X 10.6.8, 2,8 GHz. Thanks for answers! Greetings, Eva
Here is a link to the info regarding platform swaps.
Order product | Platform, language swap
If you want to try to contact Adobe support to try to get an exception, Start Here after selecting relevant responses choose "Still need help? Contact us." and the chat contact (or phone) option. -
I have a CS3 for windows and I switched to a mac. Can I get a mac version without having to pay for the suite again?
No.
Adobe only offers a Platform Swap on current software: Order product | Platform, language swap
CS3 is also too old to have an "upgrade path" and is no longer sold or supported by Adobe.
You do, as a CS3 owner, qualify for a 40% discount on your first year of a Creative Cloud Subscription though: Creative Cloud pricing and membership plans | Adobe Creative Cloud
If you don't want to go with the subscription service, Adobe does still offer CS6 (4 versions away from current & no longer receiving updates) as a "one time payment/download" perpetual license: Creative Suite 6 -
How do I activate/download my Adobe Creative Suite onto a new macbook? My previous computer and download was for Windows on a Dell.
The answer depends on which version of Creative Suite.
Either
install Windows on your Mac using Bootcamp or Parallels then install Creative Suite in the Windows Virtual Machine on your Mac.
Or, if you want to install natively on your Mac:
If CS6 then you can apply to Adobe for a platform swap
Order product | Platform, language swap
If CS5 then you must pay to upgrade from CS5 Win to CS6 Mac
Creative Suite 6
If CS4 or earlier then you're out of luck. You'll have to buy a new copy of CS6 for Mac or pay to join the Cloud. -
Issue with Visibility Settings for Backgrounds and Layers
I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave
Maybe you are looking for
-
Nobody get back to me on my other question, so I'm going to try again. I am making a PowerPoint for a meeting and I want to take a 3D PDF and have it spin or rotate on a continuous loop. How can I accomplish this?
-
I want to know why did my macbook stop working i can not login
-
Photoshop Cs4 fails to install
When I go to install CS4 ,I get a message that Bridge is open. It is not open. I try to uninstall CS4 extended trial an the same thing happens. I tried to load CS3 and bridge won't open. CS4 bridge will load even though I have run out of daYS USING T
-
Script to delete the line which is small in length and line on one another
I have lot of small unwanted lines which to be deleted manually any script which can help to deleted small line and If I delete one line i can see below it one or two line on the same line any script which can delete it. Please help me, just by clean
-
HT4899 i want to block an email due to abusive /inappropriate content
can i block specific emails