Reinstall mac os 10.6.4 using a bluetooth mouse?
Hi. I would like to know if I can reinstall mac 10.6.4 ( while doing a disc format ) using my bluetooth mouse and keyboard. I read somewhere that you should use a wired mouse. Is it true?
Download and install the combo update from here:
_http://support.apple.com/kb/DL1048_
Of course when I suggest that, I assume you have some sort of high speed internet available to you?
Joe
Message was edited by: joeuu
Similar Messages
-
i bought a mac book air. when i use sony bluetooth headset on mac os. it works well
but with windows 7, device manager did not know the device.
why?I disabled my microphone in Bootcamp Win7 Ultimate 64B and now it is completly gone. I used the Windows support CD I made and re-installed the 64B Cirrius drivers but the microphone is no where to be found also missing in device manager as well as Control Panel Audio.
Help. -
If I use my bluetooth mouse with my MacBook Pro will it drain more battery?
Bluetooth mouse (Razer Orochi) paired with MacBook Pro with Retina Display. Will it drain my battery drastically?
Not drastically but wil use at the minimum around 30 mins of battery life.....Depending how much you're using your mouse....
-
I want to use a bluetooth mouse with my ipad 2 any suggestions?
I have seen similar discussions, but since there didn't seem to be an answer, I thought I would try again.
I use PocketCloud Pro to access my virtual PC. It has a nifty mouselike display, but I would like to use an actual mouse. With my bluetooth keyboard and a mouse, I could abandon my laptop altogether and work exclusively from my ipad.
I have read about jailbreaking, but don't really want to go this route. Is there any app or mouse that will allow me to do this? If you can use a mouse after jailbreaking, why is this not a possibility?Hi at eeze,
If you are having issues with your wireless mouse, you may find the following article helpful:
Apple Support: Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
Regards,
- Brenden -
Can i use a Bluetooth Mouse as a pointer/presenter in Keynote?
I was just wondering if i could a mouse, lets say logitech bluetooth mouse aa a pointer/clicker/presenter in keynote? Can i controll the slides with each left click and move backwards with a right click?
Thanks!
RobertProbably best to ask in the community dedicated to iWork for iOS.
-
I am trying to use Boot Camp to get my recently purchased Windows 7 running but I was having issues with it. After doing some research I found out that it's because I need to format my HDD and the easiest free way to do this is to reinstall Mac OS X. So I used time machine to back up my HDD, and I was wondering how I go about reinstalling Mac OS X. My other question is should I use time machine to restore my info before I use Boot Camp or after?
Thanks for all help! =DThe error from Boot Camp means that it cannot find 50 GBs of contiguous space at the end of the drive in which to place the partition.
If it cannot, then the only solution is to defragment the drive. A simple solution if you have an external drive your can use:
1. Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive.
Source means the internal startup drive.
3. *Boot from the external drive*: Restart the computer and after the chime press and hold down the OPTION button until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button. The computer should boot from the external drive.
4. Restore the Clone
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Source means the external backup drive.
Destination means the internal startup drive.
Shut down the computer, disconnect the external drive, then restart. The computer will start from the internal drive with your old system all intact and the hard will be defragmented. Boot Camp Assistant should be able to make the 50 GB partition you want. -
Is it possible to reinstall Mac OS X Lion on MacBook and then use Time Machine to restore to the previous backup I made before reinstalling Mac OS X Lion?
My MacBook was not normally booting up. It would turn on, make the Apple startup noise, and the bottom loading bar would progress just a little bit, then my MacBook would shut down. I tried rebooting it many times and the same thing would happen, it would just shut down. Then, I read that I can reset the PRAM (by holding Option+Command+P+R after the Apple startup noise comes). That worked, but now I get a screen that asks me to choose one of the 4 options (see: http://images.macworld.com/images/article/2012/07/lionrecoveryutilities-289404.j pg). I choose Restore From Time Machine Backup, but it progresses to 17.6% and gets stuck there forever. I tried doing it again, and it got stuck at 17.6% again. That is why I am asking if I should just reinstall Lion, then restore a previous backup on the fresh new Lion?
-
How do i successfully reinstall lion as i can't use my mac now
I wiped my MacBook Pro and went to reinstall lion. About 3/4 of the way through it told me to restart my mac and when i done that internet recovery came up and when that was finished it went back to the lion recovery page. I seem to go round in circles. How can I stop this and reinstall lion successfully?
Are you using the Internet Reccovery system?
I would start that. depending on what model Mac you have try Command+Option+r keys to boot the computer from the internet. Then open Disk Utility and erase the Complete drive, not just the Macintosh HD partition. Once that is done proceed with the install of Lion. -
my dad gave me his mac. we deleted and reinstalled mac os and everything works great except for when i go to update garageband it says that it is still assigned to my dads itunes id even though he is no longer using a mac. what do i do?
thank u 4 yr help , i have managed to do it after all. i downloaded the iphone 3gs ios 4.2 manual and it explained everything i had to do on there ... all i had to do was put my sim into phone ,then connect usb lead and then open my i tunes , i clicked on my iphone and went into summery and straight away it synchronized my phone and yay up popped my sim card and ready to use ('',) many thanks though 4 yr help wendy
-
My Macbook Pro will not start anymore after the update.
When I try to Reinstall Mac OS X Lion using the Recovery by choosing the partition, I got an error message saying that it protected. What should I do?Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS. -
Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10
Hello,
I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
Your help is sincerely appreciated. Thanks.Good news!
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing. -
Problem reinstalling Mac OSX 10.5
I am having a problem with reinstalling Mac OSX 10.5 after putting in the disc to do it everything was fine it asks what language I want and then it tells me that it can not be installed on this computer. I am trying to install it on a MacBook bought last year it is an intel machine and I have always kept up on the system updates. I don't want to take it in to a store more because I am stationed in Japan and getting it to a store requires more work than it is worth. If there is any advice on what to do I would greatly appreciate it.
You need the original grey system discs for each Mac model you own, not just to be able to reinstall the OS but also to reinstall the model's bundled retail application software (like iLife, if included) & to run the very model-specific Apple Hardware Test it contains if that is ever required.
The retail Leopard discs do not include either of these capabilities, so unless you are desperate to get Leopard reinstalled on the MacBook, you should try hard to find the original MacBook system discs. Failing that, you can contact AppleCare & request a replacement disc set. Generally speaking, Apple will ship one to you for a nominal replacement cost if you can show that you own that model by providing its serial number or other proof of purchase information.
Regarding installing Vista or Windows XP, both the retail Leopard & system discs include Boot Camp, which includes a convenient utility to format the hard disk for dual booting. While complicated, this can be done without that utility but you still need the hardware drivers the disc contains to get the full use of the Mac's hardware when running Windows. I have no idea if say an iMac's system discs have the Windows hardware drivers that also support a MacBook or if this too is model-specific, so on that you are on your own. -
TS2570 Question re: "Start from your Mac OS X Install disc; use Disk Utility"
I've worked my way through the step-by-step trouble shooting in the TS2570 article up to "Start from your Mac OS X Install disc; use Disk Utility". So far, every step results in the same outcome - my formerly trusty 2007 Intel duo core iMac (24") will not start up, freezing on a grey screen with a blinking question mark on a folder. I don't completely understand this next step. I have both a Leopard and a Snow Leopard disc. I'm not positive whether these were for the iMac, or my old Macbook Pro. I assume this makes a difference.
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
How do I reinstall mac os x 10.5.8 without a full install dvd?
I am needing to reinstall Mac OSX 10.5.8 but don't have the original disk the macbook came with. I have tried using a Snow Leopard full install DVD but I keep getting the error message of "OS X cannot be install on this macbook" (paraphrased). I have tried resetting the PRAM and NVRAM but still nothing.
Any one know how to do this?Using a Snow Leopard install package will not re-install Leopard.
If you tried using a Snow Leopard install package to install Snow Leopard that shipped with a new Mac purchase, the OS X install package that ships with a new Mac purchase is model specific.
Contact Apple or AppleCare to request a replacement Leopard install package that shipped with your Mac when new. -
My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x? Thank you!
you can download the mac os x recovery hd and run the setup to a flash drive using another mac computer running os x 10.7,(so that while installation the os x setup can varify your computer's serial no. and provide you the installation setup through internet)
or the time machine backup(if you have)
Now boot through the flash drive and follow the steps to install mac os x
here is the link to download the recovery hd for flash drive
http://support.apple.com/kb/DL1433
see this before you download
http://www.apple.com/macosx/recovery/
Maybe you are looking for
-
Unable to Activate iMessage on MacPro after adding new SSD
Just added a SSD to my Mac Pro - wonderful speed-up having only System, Apps Library and User Folders on the drive! Using Mountain Lion v 10.8.4 But Messages v 7.0.1 will no longer work. On opening, it asks me to Enter Apple ID to activate iMessage.
-
I've lost the "Send" button in my reply window. When I double click on a Mail message, on order to reply, the "Send" button at the top of the window is missing. I can reply by closing and saving my reply, and re-openning from Drafts. How to fix?
-
Skewed designs from Mac to PC on adobe CS6
I am in the market for a new laptop that will work well with adobe creative suite 6 and pantone colors. However, the comapny that I do design work for and will be sending my designs to, currently has a PC with photoshop 5.5. If I were to purchase a
-
I just purchase nokia c3 two days back At first i could check my mail using wifi.but today,when i tried checking my mail,it took a very long time to load and after that it says try again later.been trying the whole day!!!=(mission failed.help please?
-
WHEN SCANNING TO EMAIL IT REQUIRES A 4 DIGIT PIN FROM THEM TO ME BEFORE THEY CAN RECIEVE THE EMAIL, HOW DO I GET RID OF THE 4 DIGIT PIN PROBLEM. CAN YOU HELP ME I SHOULD NOT HAVE THE PERSON I AM SENDING THE EMAIL TO HAVE THEM SEND ME AN EMAIL BEFORE