Reinstalling and Carbon Copy Cloner

I mistakenly posted my question to an 'answered' thread, so will re-post it here. Apologies for the duplication!
Hello Good people on this Mac Forum.
I need your help. Here's the situation:
I'm running OS 10.3.9 on my powerbook G4, which I divided into 5 partitions when I first set it up, a couple of years ago now.
The trouble is that as I grow and my computer grows with me, the partition where I store my hard drive files just isn't big enough to keep up (I have less than 1GB free on this drive and obviously keep getting 'full' messages).
I've already moved most of my applications out onto another partition (months ago now), which has caused various small problems (e.g. I can't open PhotoShop or Dreamweaver files without opening the application first), but the hard drive keeps exanding as I receive emails and blah blah and now it's to the point where I don't even have room on my hard drive partition to receive a podcast, or download a new album to iTunes.
I have plenty of room on other partitions, so my thought is to get rid of the partitions altogether and open my computer up into one large hard drive disc again.
The folks at AppleCare have told me I need to boot from my Software Install and Restore disc and erase the whole disc; then go through the re-installation process.
The problem is that installing from my 'Software Install and Restore' disc will take me back to where I was when I bought the computer (Jaguar), while I am currently running Panther with the benefit of all those years of software updates, etc. I would like to save myself the time and trouble of redoing all this work if at all possible.
I've backed up all my current files on an external drive, using Carbon Copy Cloner (which is partitioned to exactly mirror my computer). What I'd like to do is just get a clean slate on my computer and transfer everything from the external hard drive over onto it. In other words I want to have one drive on my computer, and keep everything exactly as I have it now (sans the partitions).
Has anyone done this before? The AppleCare folks can't help me with the transfer because they are officially unable to advise on anything involving third party software (in this case CCC). They suggested I come here with my question, where people are not constrained by the same rules.
I had originally imagined I could just go through the installation process with my 'install and restore' disc, and then drag and drop (or clone) my backed up files over the new install, replacing them, but they said there might be problems with that. Has anyone had experience with this?
Another solution might be to erase my computer's hard disc, and then boot up from my external drive and clone the backed up files directly onto the empty disc. Would that work? I'm not sure how to boot up from my external drive, or make sure that those files are bootable, however.
Unfortunately I can't find my Panther OS install disc (it's somewhere in a box in the basement that I haven't unpacked since moving), which I'm sure would make the whole thing easier.
Any thoughts or advice for would be very much appreciated.
Amy

Hi Grant,
Thanks for replying!
I've done it several times. The only thing that I'm
not sure of is how you go from several partitions
back to one
This is what I need to do, yes. Are you saying you haven't actually done it? (I too have gone from one to several partitions, and also from several back to one -once- but I didn't need to replace files from an external back up that time.)
(your backup must be to several different
partitions, right?)
Yes, my back up is an exact mirror of my current set up, with the same partitions.
Before you do this, make sure that your backup on the
xternal drive:
1. Is on a firewire, not USB drive
Right - it is.
2. You marked "make bootable" on CCC
I did that, yes.
3. Make sure it actually boots
How would I check that? I don't know how to start up from the external hard drive.
All that said, there are advantages to doing a clean
install.
I'm not sure what you mean by this - do you mean just install through my 'install and Restore' CD?
Its not a bad idea, so long as you can back
up and restore just your files. Most of the updates
will happen automatically (except apps and 10.3.x),
But these are the updates I'm concerned about. There are a LOT of them - I am a web designer and regularly use a LOT of applications. I don't want to reload every one of these, and go through all the updates again. I have deadlines to meet and need to spend the shortest possible time on all this and be safe and smart about it.
and you know that its clean and uncorrupted.
Nothing is corupted now, that I know of. That isn't really the problem.
But you
can always do that later, after the clone, if you
have a problem with it.
I'm not sure what you're referring to here, but I do appreciate the support, especially since it sounds like you use CCC. Can you tell me know to check to see if my backed up systems partition (on the external hard drive) is bootable? Thanks so much.
Amy

Similar Messages

Considering FileVault usage on an iMac with OSX 10.6.7. Wanting to know more about strengths and weaknesses of Filevault with Time Machine, Parallels and Carbon Copy Cloner. Any negatives to consider before flipping the switch?

I'm considering FileVault usage on an iMac with OSX 10.6.7. Wanting to know more about strengths and weaknesses of Filevault with Time Machine, Parallels and Carbon Copy Cloner. Any negatives to consider before flipping the switch? Any information ?
Would specifically like to know:
Filevault impact on performance and application usability.
TIme machine impacts, and whether TIme Machine volume will also be secure?
Will a Cloned copy made with CCC be bootable, or usable?
Any other negatives to consider before turning this thing on?
Thanks,

Filevault impact on performance and application usability.
FileVault encrypts the user's home directory only - it is basically an encrypted disk image that is automatically opened when you log in and closed when you log out. It does cause disk accesses to be a bit slower so it isn't a good idea to use an encrypted account with sound or video or large graphics files. I have no experience with it with Parallels Desktop but suspect that you'd notice a bit of a slowdown. Note: in the User's directory you'll see a Shared Folder. Since FV only encrypts the user's directory you can put data you don't need encrypted in this shared folder which won't be encrypted.
TIme machine impacts, and whether TIme Machine volume will also be secure?
There are issues with TM and FV but how extensive they are with Snow Leopard I can't say, once I realized that TM and FV hadn't substantially changed between 10.5 and 10.6 I stopped dealing with it. When FV and TM were first introduced my testing led me to recommend using CCC or SuperDuper! for backing up.
Will a Cloned copy made with CCC be bootable, or usable?
Yes
Any other negatives to consider before turning this thing on?
Since FV is nothing more than a disk image - and disk images can fail - there are several problems with FV in my opinion. If an encrypted disk image fails it isn't possible to access any of that data. If you don't have a recent (undamaged) backup of the disk image and/or recent backup of the data within the disk image you are in a world of hurt. This isn't just a warning of possibility - this is a real danger that I've seen all too often at the shop where I have worked part time for a number of years.
At this time I strongly recommend that people who have sensitive data keep that sensitive data segregated from their general data and encrypt only the sensitive data or use other methods of locking it down such as saving on an external drive that is kept in a safe. Call me paranoid but I don't even keep all my sensitive data in one encrypted disk image. I use multiple disk images and keep multiple sequential backups. That way I might someday find that my up-to-date investments disk image won't mount but (a) I can go back a week to a backup and (b) that won't impact my up-to-date business records because those are in a different disk image

Mac Pro Boot slow after Leopard Update and Carbon Copy Cloner

I just purchased a 1TB Internal hard drive - Seagate Barracuda 7200rpm - and used Carbon Copy Cloner to clone my original hard drive (which is running Tiger). Everything seems to be normal, except the the long boot up process. The desktop appears, the dock appears, and then there is a long pause of 20 to 30 seconds before the drives mount and and the desktop folders appear. I have 10 gigs of RAM, I have rebuilt the Directory with Disk Warrior 4.1, and also repaired the disk permissions (although some of them state that they can't be repaired). When I reboot from my original 250 Gig hard drive, the boot is lightning fast. Any thoughts? I have many third party software programs installed and am trying to avoid a fresh Leopard Install. Thanks, this is my first post!

this may happen on the first boot on a cloned drive because the system has to rebuild various caches that are not cloned. it should be back to normal boot speed after that.

Mountain Lion is missing, after installing an external hard drive and Carbon Copy Clone.

I have a mid-2007 desktop iMac Model MA877LL, 2.4 ghz/1gb/320gb, with 4 GB memory, upgraded to Mountain Lion 9/7/2012 at an Apple store (now 10.8.5). I just installed a new external hard drive Fantom Drive 1T G-Force Mega Disk Firewire 800, then installed Carbon Copy Clone successfully. However, I could not get the clone to boot from the backup volume. Mountain Lion showed in both Macintosh HD and External Hard Drive at that point. After working through many steps with CCC, trying to get it to boot, the final suggestion was to try installing Mountain Lion onto the backup disk via the Mac App Store Installer. As my Mountain Lion was installed at an Apple store, there's no record of it on line and I can't find an installer, although I've been doing updates as they're issued. Per article, "OS X: Installing OS X on an external volume", I erased and reformatted the storage device. Now, checking my Macintosh HD, Mountain Lion is gone. How do I get it back?

Woodswalker wrote:
...Per article, "OS X: Installing OS X on an external volume", I erased and reformatted the storage device. Now, checking my Macintosh HD, Mountain Lion is gone. How do I get it back?
Are you saying that your internal HD doesn't have an operating system on it either, meaning you can't boot your iMac at all? Or that the external was also named "Macintosh HD" in which case, having been erased and reformatted (hopefully with a GUID partition table), you'll need to clone your internal to it once again.

Can time machine and carbon copy cloner use the same backup drive?

Can time machine and CCC use the same esata backup drive?

Yes, but you will need to first partition the drive so that TM and CCC will backup to their own respective volumes. This way the CCC volume can accommodate a bootable clone.
Be sure the TM volume has adequate space. A TM backup volume should have about twice the capacity of the volume it backs up.

Carbon Copy Cloner: do you have to wipe the target drive

From reading the instructions that come with the download of CCC, it seems that when you clone your Applications drive to another drive (as backup), you are essentially reformatting that 2nd drive to be a copy of the first, right?
So when you use CCC, you must have a drive dedicated to becoming the clone? You would lose all data on the target drive? Correct?
If so, it seems to make sense to get a modest hard drive just to hold a clone of the cleanly reinstalled system.
I still am not clear on how to create a bootable clone on a drive, and how to restore that clone. Do you have to reinstall the operating system (and the various application files that also are installed at that time) and then somehow transfer the clone back to the original drive. Or somehow does the clone make it unnecessary to reinstall the operating system before moving the cloned copy of the os back to the Apps drive.
Whew, that's a tangled up understanding so if anyone can unravel this mess itd be great.
Also, is CCC better than making disk images with Disk Utility?

Jon:
Some of what I say will be repeating some of what has already been posted by way of giving a comprehensive response.
The two most popular and powerful utilities for backup/cloning are SuperDuper and Carbon Copy Cloner. Both have their supporters. Both are effective and relatively easy to use. The latest version of CCC is more powerful, but, I think, SD is easier to use. One of these is the first element in making a clone.
SuperDuper will erase the Destination drive before cloning. CCC gives you an option. You really want it erased, unless you are doing cumulative (SmartUpdates in SD) updates, or you will end up with a jumble of stuff. Both will do cumulative updates. CCC allows you to drill down to a single folder. SD allows you to clone the entire HDD, or just the Users Folder. Both make bootable clones, diskimages, compressed read only disk images.
You need an external firewire Hard Disk Drive. Get the largest you can afford and partition it. Since PPC Macs will not boot from USB devices, firewire is important. There are a lot of HDDs out there, some are sexy looking, some have one touch backup etc. The most important feature in a firewire HDD is that it should have the more reliable Oxford 911+ chipset. This is the part that interfaces the Hard Disk Drive with the computer. When it goes, and it does go on many of these drives after the warranty has run out, the drive itself may still be functional but the computer can't see it. Here is a list of HDDs from OWC that have the Oxford 911+ chipset.
You need to format the new HDD Mac OS Extended (Journaled) and, if it is larger than you need for backup, partition it. Dr. Smoke's FAQ Backup and Recovery has excellent tips on backing up, and has a suggested scheme for partitioning your new external FW HDD. If you need step-by-step directions for partitioning and formatting, please post back and ask.
Finally, once you have chosen your partition scheme, adjusting or deleting partitions would destroy all data on the drive except you use third party software.
Cloning is an excellent way of backing up as it not only gives you a backup of your data and total installation, but it gives you an emergency boot drive as well as a drive from which you can boot to run diagnostics and repairs on your internal HDD.
Please do post back with further questions or comments.
Cheers
cornelius

Advice on Carbon Copy Cloner vs. Time Machine

I have been stuck with a crappy all in one router/modem from the cable company for the last year. Yesterday, I bought an Asus RT N56U. It works great and I get great range. I almost went with an Airport Extreme, but went $40 cheaper. Then, while I was there I decided to get a hard drive for backups since I really need to be better about this with all of the pictures we have of our young children. My wife and I also have Macbooks from 2006-2007 era. Mine's 1,1 with an upgraded memory to 2GB and a new 500GB HD. My wife also has a new HD and the same specs. Anyway, I was tired of hooking them up for time machine backups, so, I tried to format my new Toshiba 3TB hard drive with 3 partitions, all MacOS Extended. One Partition for each of us for time machine and one for random other storage. I wanted a box where I could access this stuff from my iphone if I wanted, just because I thought it was cool to use aicloud (asus).
Anyway, I backed up my computer and hers using time machine with a direct connection to each computer. Then, I tried to hook the hard drive up to the router and can't find it. Come to find out the router only supports FAT and NFTS and one or two other formats. It does not support Mac OS.
So, now I've tried to figure out a way around this. Carbon Copy Cloner says that it will support non Mac OS formats for the hard drive, but not for a bootable copy. So, I could theoretically use CCC to copy things to the HD through WiFi if it is formatted non MacOS, just I wouldn't get a bootable copy. Maybe, I could just copy things like pictures and what not and not all the crap that ends up on my computer after 6 years.
Or even could CrashPlan do a local back up through Wifi?
I basically want something similar to the functionality of Time Capsule with or without Time Machine, but kind of like saving a few bucks, getting 3TB, and a pretty solid router.
Seem reasonable to anyone?
Sometimes I think I should have just gotten a time capsul ... Need to double check Best Buy's Return policy.
Thanks!

Sometimes I think I should have just gotten a time capsul ...
So do I.
Time Machine supports two and only two backup devices: a locally connected volume (like your Toshiba HD) and Time Capsule. If you are fond of the pictures you have of your young children, then use a supported backup method.
You can exclude specific volumes or folders from Time Machine and Carbon Copy Cloner.
Why anyone would buy anything from Best Buy is one of the great mysteries of life. Good luck returning it.

How can we disassociate an Apple ID from a set of computers formated from a single computer using Carbon Copy Cloner and a single image and then Migration Assistant to install their old profile? The original ID is the Apple ID for all the stores.

Here is a bit more detail.
We were replacing old teacher machines and wanted to do it as efficiently as possible. Therefore, we set up one computer, through the OS installation and ran all updates, and then made a disk image so that we can use Carbon Copy Cloner to image all the other computers without having to run all the other updates. Once they were set up to a base level and assigned to a teacher we used Migration Assistant to import all their old files and items. Everything has been fine until recently the computers became aware of needing an update for one or two apps. The machine asks for the original computer's Apple ID for all updates. We have logged out of the apple id and back in with another to test if running the updates will work with that Apple ID and even after a refresh it still asks for the other Apple ID. How can we disassociate the Apple ID from those other computers so that the individual who owns the original is not needed each time there is an update or has to give out their Apple ID password?

There are two parts to this:
1) It may be that you should have an Apple Education Support person helping you with this. If you have enough computers for this to be a problem, you may benefit from a Server, a site license, and an occasional visit from an Education Support Specialist.
2) The brief answer, if you want Individual Apple_IDs to control each computer, is to buy new copies of Mac OS X under those new Apple_IDs and re-download and re-Install. Mac OS X is customized to the Apple_ID before it is downloaded.

What exactly is a Carbon Copy Cloner and does it work on iMac Intel?

A friend of mine recommended to me that carbon copy cloner is the best way to back up data including applications and that it is a freeware downloadable via their website. Can anyone explain to me (using layman's language) what exactly it is and give me a step by step procedure on what I have to do to make it work? Also, does it work on iMac Intel and if so, would I have to set anything differently??
FYI, I do have a La Cie firewire drive.

Did you check out their website? It really has a lot of info, but here it is in a nutshell.
CCC is a cloning software tool. It will make an exact - and bootable - copy of every last bit and byte on your internal drive. You can then use that FireWire drive to boot up your Mac, or restore the data from it in case of an emergency, drive replacement or failure.
It is not universal yet, but it does run through Rosetta.
Download the program and there is a PDF file with all the step by step instructions, but it is really easy to use.
BTW, LaCie has a program that is very similar called SilverKeeper.

Upgrading harddrive and using Carbon Copy Cloner

Hi I'm planning to replace my internal harddrive on my old MacBook Pro (August 2007) running Leopard with the following harddrive:
Seagate Momentus 7200.4 ST9500420ASG - Hard drive - 500 GB - internal - 2.5" - SATA-300 - 7200 rpm - buffer: 16 MB
Is it fully compatible? Also, this ST9500420AS "G" model is said to have its own G-Force sensor. How does it all work out with MacBook Pro's sudden motion sensor?
Finally, if I use Carbon Copy Cloner to clone my old harddrive onto my new harddrive, how can I solve the problem of the "etc", "tmp" and "var" recurring folder problem without the use of the Mac OS X Installation Disc (since I've lost it)?
Thanks very much.
P.S.: Anything else special that I need to take note of when using Carbon Copy Cloner?

The Random Sniper wrote:
Thanks very much. So it is recommended that I should rather for the ST9500420AS non-"G" model for my MacBook Pro to avoid conflict with the existing Sudden Motion Sensor?
If you want to stay with a Seagate, yes.
However, I've also heard that Apple has released a firmware in the past to deal with the G-Force sensor / SMS conflict issue for the MacBook Pro (while nVidia didn't)? Is that true?
Which firmware update are you referring to?
On the other hand, would Western Digital Scorpio Blue's WD5000BEVT be a good alternative? I have heard that although it is only 5400rpm, it's performance is as good as 7200rpm harddrives.
Take a look at a site which has reviews, such as newegg, tomshardware, xlr8yourmac.com. In my mind, Seagates seem to have gone downhill and quite a few people have posted here with compatibility issues.The WD 640GB also seems to have more than its fair share of problems, although I don't believe the 500 shares those issues. After reviewing tests at tomshardware, I chose a 7200 Hitachi 500GB, which was at or near the top in nearly all categories, and has very good user reviews at newegg. I've yet to choose a 2.5" SATA external enclosure (with the number of enclosures around the house, it's hard to believe I don't have one yet, but I guess not), so have not run it yet.

Carbon Copy Cloner and Disk Utilities

I am trying to clone my drive to re-image all my computers (27), I used Carbon Copy Cloner to clone my new image and it works well; however, If I use disk utilities to restore another computer to the new image several files that should be invisible are in fact visible (etc, tmp, & var). While does this happen and how can I fix the problem. Remember I have 27 computers to re-image and 125 student accounts to manage the fix has to be easy.

From "Supported configurations" at http://www.bombich.com/software/ccc.html
"Mounted disk image. Cloning to a disk image will (obviously), not yield a bootable volume unless you use CCC to restore the image to a physical partition or disk."
From this, I gather that you must use CCC to restore the image. Presumably this would require using Firewire Target Disk mode, booting from a Firewire connected drive, or booting from another partition with the other Macs -- otherwise you would be trying to replace the OS those Macs are booted from!

Finder crashes when backing up time machine or carbon copy cloner

I'm trying to create backups of my system, i did have time machine running to a secondary drive internally, but that stopped working at some point and i assumed it was a bad partition.
Everytime i try to create a backup through timemachine it would crash the finder (though it would never create a crash report, just hang) i'd have to hard crash my machine to get it running again.
I verified and repaired any permissions, dumped pref files but still no joy.
I've now bought 2 new drives for clone / backups, thinking the drive is perhaps corrupt.
My plan was to use carbon copy cloner and clone the main hdd as a safety,( incase it was a time machine issue) but its doing the same with CCC-
when i hit clone the finder window pops up asking for my admin password, but beachballs and wont let me type anything. i can select anything with the keyboard (i.e. Jump between programs, or force shutdown running apps) i can shutdown using the file menu but i can close any open windows.
I can copy files manually, but i want a bootable backup of the main hdd (i'm a video editor and reinstalling an entire suite is not good when on a job)
Can anyone suggest a workaround to cloning the main hdd (even if it does have a bug in it, i'd rather have something safe before i do a fresh install)
Cheers

That should read 'CAN'T select anything with the keyboard or finder'

Upgrade of a hardrive with carbon copy cloner

I upgraded my daughter's macbook hardrive and used carbon copy cloner to transfer all the mac stuff over to the new drive. It worked great but the windows stuff did not move with it. she uses boot camp and has not upgraded to leopard yet but has the most recent version of tiger. Is there a way for me to move in total her windows in boot camp without reinstalling it from the beginning?

Hi,
two things you can try:
If the BootCamp Windows uses the FAT32 file system, try this: http://discussions.apple.com/thread.jspa?threadID=717201&start=0&tstart=0
if it uses the NTFS file system, have a look at WinClone: http://www.twocanoes.com/winclone/
Good Luck
Stefan

HELP! Has Carbon Copy Cloner Killed This G5?

I've got myself into a right old pickle, and wondered if any of the Mac faithful would be able to share any bright ideas on how to proceed.
Essentially, here's how I spent my Bank Holiday;
Mission - To completely clone the 150GB System and 230GB 'Projects&Sounds' internal drives on a Dual 2GHz G5 - both drives over 99% full. OS=10.3.5
Began by downloading SuperDuper only to find Sys Reqs not met. (10.3.9 required).
Used Carbon Copy Cloner to duplicate 230GB Internal to 240GB partition of 400GB Ext FW800 drive - all good.
Used CCC to move 56GB of files from 150GB Ext FW400 drive to 130GB partition of 400GB Ext FW800 drive - all good.
Used CCC to clone internal 150GB System drive to 150GB Ext FW 400 drive. 'Bootable clone' selected.
At end of cloning process, with roughly 1GB left to go, CCC hung up.
Force quit CCC yielded no result.
After 2 hours, whole system was frozen, including menu-bar clock & dock. Hard restart from power button.
Stalled at grey screen - Apple & spinning cursor
Disk utility verified all clones OK - backups intact. Initial side by side check reveals all files seem to be present.
Mission now to get G5 going again.
Hooked up 1st G5 by firewire Target Disk Mode to 2nd G5.
Ran Disk Utility on 1st G5's System drive from 2nd G5. Error reported; "The underlying task reported failure on exit (-9972)" Also reported "Keys out of place" Failed to verify/repair.
Installed Disk Warrior 3.02 on 2nd G5 & ran on 1st G5's System drive. Reported major differences between original and rebuilt directory in preview, chiefly in HD Library (App Support) & System Folder.
Made note of differences and rebuilt directory of 1st G5's System drive with Disk Warrior.
Rechecked with Disk Utility, 1st G5's System drive appeared fine this time.
Attempted to boot - stalled at grey screen - Apple & spinning cursor
Booted 1st G5 into Single User mode; fans screaming; reported
"Can't open Library: / System / Library / Frameworks / CoreFoundation.Framework / Versions / A / CoreFoundation (No such file or directory, Errno = 2)"
Ran fsck, all good.
Exited Single User mode, Finder failed to launch.
Relaunched Target Disk Mode, copied missing file from clone back to original.
Attempted to boot - stalled at grey screen - Apple & spinning cursor
Booted into Single User mode; reported huge screen of gobbledygook (see pic!)
Attempted to reinstall System 10.3.4 (Archive & Install) from Install disk - got first kernel panic
Would not boot from install disks
Ran Apple Hardware test - test would not run
Error - "Invalid Memory Access at %SRR0: 00000000.00000000 %SRR1: 10000000.00083030"
Apple PowerMac7,3.5.1.8f2
BootROM built on 05/21/04 @ 10:56:59"
Reinstalled system 10.3.4 over firewire Target Disk Mode from 2nd G5 using Install disks.
Attempted to boot - Kernel panic.
Ran Apple Hardware test again - test still would not run.
Error - "Invalid Memory Access at %SRR0: 00000000.00000000 %SRR1: 10000000.00083030"
Apple PowerMac7,3.5.1.8f2
BootROM built on 05/21/04 @ 10:56:59"
Unplugged all FW & USB peripherals
Removed all but 2 of RAM chips (8 x 1GB DIMMS installed in machine altogether)
Attempted to boot - Kernel panic.
Swapped RAM around in pairs
Attempted to boot - Kernel panic.
Ran Apple Hardware test again - test still would not run.
Error - "Invalid Memory Access at %SRR0: 00000000.00000000 %SRR1: 10000000.00083030"
Ran out of ideas, patience and hair to pull out. Went home to sob on the wife's shoulder and hug the cat.
Now what?
I have to get this computer working again fast!
cheers, and sorry for the long post
Dave
G5 2GHz Mac OS X (10.3.5)
G5 2GHz

Just an update on the situation;
First of all, many thanks you guys for all the replies and helpful suggestions - I was a few millimetres from the end of my tether when I first posted.
After I ran DiskWarrior on the System Drive, it appeared to be OK according to both DU and fsck, so I was able to do another backup copy of all the important stuff. I'd already used Target Disk Mode to create some space on it, prior to my Archive and Install of 10.3.4 over firewire. This still had no effect, however.
As luck would have it, yesterday morning a mate of ours who is an audio systems tech was in the building on another job, so he popped by to have a look. When I opened it up, it was like it had been found in the middle of an ancient pyramid, brown sandy dust all over the fans and the heatsink. We performed a PMU reset, swapped the ram around again, unplugged the HDs and attempted to boot from CD - still no joy. Quite a lot of swearing though.....
My techy mate confirmed my worst fears that it is most likely a blown processor or logic board. We're going to swap in another system drive today just to make sure, but it doesn't look good. Fortunately, he was able to loan my colleague another machine to use whilst the G5 goes away to sickbay for diagnosis and a no-doubt costly repair, but we still had to reinstall and reauthorize the mountain of plugins (over 250!), then copy over more than 100Gb of project and audio files from the backups, which took until 10pm last night to accomplish. We'll have to do the same thing again if and when the original machine comes back from repair.
I'm devastated, this is exactly the disaster I was trying to avoid in the first place. I didn't know you could clone from DU (thanks Tom) - if I did, I probably wouldn't be in this mess..... you live and learn, eh?
This morning though, everything seems to be running fine, the temporary G5 is performing well. Three days behind schedule, looking at a possible £1500 repair bill, but at least we can get some real work done now!
Thanks again to everyone
Dave
G5 2GHz

Carbon Copy Cloner Problem: Can't see my Macs HD when selecting Target Disk

I cannot find an answer anywhere on the net, so I'm trying the trusty Apple Discussions forums. Using Carbon Copy Cloner, I backed up everything onto an external HD and I erased everything from my G5 and reinstalled the software it came with. I then also reinstalled Tiger OS X and now, using CCC, I chose all the original backed up volume from my external HD as my Source Disk, but when I try to save them back onto my G5's HD, I cannot see my Macintosh HD under CCC's Target Disk options. (Note: I recently did exactly the same thing with my iBook using CCC and I was able to see the iBook's HD under CCC's Target Disk options without any problems).
More info: I'm trying to do an Incremental backup, though I tried the "Backup everything" option too (which, incidentally, would defeat the purpose of erasing and reinstalling) just to see if my Macintosh HD would show up under the Target Disk, but it still didn't.
I would really appreciate it if someone could tell me how to get my Macintosh HD to appear under my Target Disk options on CCC. Thx.

I was able to figure out what I was doing wrong on my own
Well done! but you don't need to be "on your own" - you would do well to:
•  use the link that 'baltwo' gave you and at the very least look at Announcements and Stickies
•  use CCC Help available online here or (same docs) from the CCC Help menu.
Andreas   Bombich Forums Moderator

Reinstalling and Carbon Copy Cloner

Similar Messages

Maybe you are looking for