Rejected email notification are not generated in CUP 5.3

Dear Experts,
     The rejected emails are not getting delivered to the user in a particular scenario. Below is my scenario where the email is not generated
1) The request has two roles with two role owners / BDOs
2) The rejected email delivered if the manager rejects the request
3) the rejected email is not delivered if one of the bdo rejects the request first and then the other BDO approves the request later.
4) The rejected email is delivered to the user if one of the BDO approves first but the other BDO rejects only after the first BDO approved the request.
Our conclusion is that the rejected email will be delivered only the last BDO rejects the request but we want the email delivered at any level.
We are looking for some solution for the step 3 in the above mentioned steps. Any help or solution is appreciated.

Varma,
   You have two approvers in the same stage (BDO) whereas manager stage has only one approver. Whenever manager approvers/rejects there is noone else changing the approval and it goes to next stage. In the next stage (BDO), anyone approver can change the approval before it gets routed to the next stage. Can you check the rejection level setting in the BDO stage configuration? If you set the rejection level to request instead of role, this should reject and close the request and CUP will send the email notification.
Regards,
Alpesh

Similar Messages

  • Emails are not generated in CUP To approver, manager

    Hi ALL,
    I Configured one work flow  in CUP. I did SMTP Server setting, EMAIL Remainder setting.
    When I create new account request , CUP is provisioning access properly and automatic mail is going to that user. Mail is not coming to Approve r.
    When I create other requests (change account etc)  provisioning is done properly, but mails are not generated to user, approve r, manager .?
    How can I fix this? Please suggest.
    Thanks,
    Joseph

    Joseph,
      There can be only 2 issues here:
    1) SMTP server config is not correct or CUP is not able to reach SMTP server.
    Ask Basis person to ping the SMTP server from CUP. If it works, then don't worry about 1).
    2) Email reminder job is not running or emails are going to junk email
    Check the log for email reminder job and make sure it is activated and running. check your junk mail folder.
    Rgds,
    Alpesh

  • Email notifications are not working anymore

    Hi guys,
    I use Grid Control 10.2.0.2 on Windows, and email notifications for critical alerts are not working anymore.
    I didn't change anything to the OMS configuration, it just stopped one day, and when I ask for a test email (in "Setup -> Notifications methods" of in "Preferences") it is successfully delivered.
    I didn't find anything related to this in log files, and nothing that could help here or on metalink.
    Can anyone help about that weird issue ??
    thanks in advance
    Antoine

    Have you gone back over your notification rules?
    have you tried just creating a new notification rule and testing it?
    Also take a look at Note:356774.1. If you've applied any patches (or done partition maintenance) you may have inadvertently lost all your jobs, which will break the email notications.
    If still no joy, then try Note:285093.1.
    let us know how you get on.

  • Email notifications are not receiving soon...

    Hi all,
    I am sending notifications to the users.Some of the notifications are receiving early i.e within 2 minutes and some are taking more than 1hr time to reach.
    The mail status in the wf_notifications is stuck to mail and it is taking time(1hr) to change its status.
    Can anyone please tell me why it happens and what is the reason behind it and what i should do to send notifications early?
    If i posted this in wrong discussion forum thenplz tell where to post the workflow related questions...
    Thanks in advance..

    Please upload the output of wfstatus for the problematic document .This report shows what are the activities performed by a workflow. refer:
    NOTE.134960.1 Running WFSTATUS and WFRETRY For Oracle Purchasing Workflows

  • Mi emails notifications are not appearing as other applications, only can see them when open my mails

    Hi I have an Iphone 5c and set my email account (local provider company).
    I can receive mails perfectly and also send mails but the notification of a new mail comming is not appearing with the red globe on top of the Mail as suppose to.
    Once I entered the mail application the mails start to download and the red globe appears but not before just after I entered tha application.
    the other applications I have like whatsapp and bbm are working perfectly. I check the notification center many times and looks ok for me but don't know what could be the problem. If someone can help me I really appreciate...

    Push mail is automatically sent to your device when it arrives at the email server.  Your email account has to support this. 
    Settings > Mail, Contacts, Calendars > Fetch New Data > Push > ON,  your account > select Push (if available), Fetch, or Manual
    Below list of accounts:
    Fetch > select interval

  • EMAIL Notifications are not displayed in UWL

    HI One & All,
    I configured UWL and tested for Leave request Process. Workflow is working fine. Manager is approved the leave. But when manager approved leave a Notification should come in to UWL.
    that notification is cumming in SAP INBOX but it is not appearing in UWL.
    Suggest what are the steps need to follw.
    Regards,
    KSanj.

    You need to create a system to connect to the backend and do the UWL Configuration in Portal.
    Search on SAP Help or on SCN for more information.

  • Email notifications are not showing in notification center

    i have a macbook pro with OS X moutain lion 10.8.2...
    the problem is that i don't get any notifications in the NC. Although i enabled alerts and notifications for my email account, twitter and FB as well in the system preferences...
    i tried many advices on the web like sign in and out from the iCloud account, or re-enable the notifications in the NC....but none has worked for me !!!
    any suggestions or tips, should i enable some hidden feautures?
    thanks

    even i am facing the same problem

  • Notifications are not being generated for any emails that have rules applied to them.

    Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

    In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
    that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria.  PLease check
    1) whether your rule has trun on alert supression
    2) Close the alert, craised by rule,  and do it again
    Roger

  • Email notifications are the only thing NOT working!!!

    Email notifications are the only thing NOT working!!! Everything is set up correctly. The form works and the person submitting gets a message, but I don't. I tried 3 different email addresses and still not working. Any real fix for this?

    Hello:
    Try resetting the PRAM.
    Barry

  • Email push notifications are not working.

    I'm running os 5.0.1 on a iPod Touch 4.  Push notifications are not working for email.
    The only way to check emails is to go into the email app and check for updates.
    I deleted my email accounts and reloaded them.
    I removed all active apps and restarted my iPod and still does not work.
    Fetch New Data is set to Push.
    I hear a lot of problems with this but is anything beiing done?
    Why would this all of a sudden stop working?

    Your welcome, nice it's working now

  • Workflow notification are not sending to employee

    gusy,
    on 11.5.10
    We have created New type in Special information which access by SSHR,In this page in sshr employee enter their information and send to manager for approval,while submiting system shoud be generated two notification one for requester and other for supervisor,but the requestor notification are not sending while supervisor is woking fine,so how can i rectify what the exact prolem with requestor notification,
    could you please adive..
    Thanks

    The workflow notification back to the requestor is just an FYI notification. When the Workflow Mailer emails a copy of the FYI notification it automatically closes the workflow notification.
    Could it be that this is happening? Try this:
    1) Login as the Requestor and access their Worklist
    2) Change the view to see 'Closed' Notifications
    3) Do you see the notification in the list of closed notifications?
    If so, try temporarily disabling the Workflow Mailer so that no email copies are sent and then repeat the SIT request. Does the requestor now see that notification in their 'Open' notifications?

  • Notifications are not sent to some users, even after the status is green.

    Hello
    There are some notifications sent to many(4 to 5 users and i am one of them) users from the SAP system. And i can see in the SCOT transaction that the notifications are sent successfully to all the users. Status is Green(transmitted). But,the issue is that, Some users are getting the notifications and some(Incliding myself) are not.
    The users who has mail id say for example  [email protected] are getting the notifications within no time but some usres who has maild id like [email protected] are not getting the notifications even after a day.
    There are two Nodes are active in the SCOT transaction, One is SMTP and other one is Dummy.
    In the address area of the Node SMTP, around 11 users mail ids are maintained, which includes both type mail ids xxxxxxx@xyz and
    [email protected]
    And the * (star) is maintained in the address area of the Node Dummy.
    Can you please give me some clue which can help me in resolving this issue.
    Thanks for your time.
    Chetan....

    Hello Balaji,
    Thanks for your inputs.
    As i informed that, there are two nodes active in the SCOT transaction. Address area of the NODE A is already set as '*'. So, it was not possible for me to set the start * value in the address area of the NODE B. I dont think its possible to maintain * in Both the NODES.
    In the Node A, we have maintained * and in the Node B we have maintained some users mail ids. Because, as this is Quality system we dont want everyone to get the notifications.
    Thanks for your inputs.

  • Email notification sound not playing

    I have 2 email accounts synced to my phone. One hotmail and one from my offices exchange server. I only get notification sounds from the hotmail account and not the other. I  need the notification to play for the outlook exchange account. I have notifications turned on and a sound selected. Why is it only playing for the hotmail account and not on the outlook exchange account? How can I fix this?

    Leave the one you have setup for your hotmail account alone since that one is already working for you. Go through the steps listed below for your outlook exchange account and see if these steps will work for you.  
    1.From the home screen, touch the applications tab (located in the lower-left).
    2.Touch Mail.
    3.Touch Menu.
    4.Touch More.
    5.Touch Settings.
    6.Touch Notification Settings.
    7.Touch Email notifications.
    Email notifications are enabled if a green check mark is present.
    8.
    Touch the desired notification.
    Notifications are enabled if a green check mark is present.
    Notification sound
    Notification vibrate

  • Mail notifications are not getting sent from a Calendar client

    Mail notifications are not getting sent from a Calendar client
    <p>
    On the client, after creating an event and electing to send a mail notification,
    the following error appears in a pop up box:
    "module:mailmsg.ctp,label 190, service error"
    Also, in the /users/unison/log/cws.log file on the Calendar Server, there is an
    error from the corresponding time that the client receives one:
    DEXOTEK ERRCODE Ox132B0 -> CWTCP_RemoteSecurityModified: RNC_SecurityModified
    -> Request 0x443 for NodeId 10002,
    status set to CANTSERVICE
    Solution:
    If this is only happening for one user, then check for the presence of a dbv.log
    file in the /users/unison/log directory. If present this implies db corruption
    and the /users/unison/bin/unidbfix tool should be run.
    Note: For details on "unidbfix", please read the man page and also the online
    Calendar Administrators Guide.

    I am having the exact same problem sending through a comcast smtp server to a mac.com email address:
    Reporting-MTA: dns; qmta11.emeryville.ca.mail.comcast.net
    so some problem they are having in emeryville today? I too am waiting for it to clear up.

  • Lines are not generated for holidays and sundays

    Hi
    creating a sale order shcedule lines are not generated for sunday for a particular plant .
    Schedule lines are generated for subsequent monday only.
    the plant calander  is also  correct
    with regards
    partha

    Hi
    I would really double check the factory calendar ans the  of the plant and sales organisation
    regards,
    Sidi

Maybe you are looking for

  • RETURN Clause in IF...ELSE Condition in PL/SQL Block

    Hi Could you please explain me the importance of a RETURN Clause in IF..ELSE Condition in PL/SQL Block with an example. Regards Nakul.V

  • Using photos from iphoto in adobe photoshop elements

    I'm new to the mac world. I do a lot of casual digital photography. I like to edit pictures and create things in photoshop elements. I'm trying to make sure I'm opening photos from the correct folder in the iphoto library. I think either using photos

  • MacBook Pro and Adobe CS5 graphics card upgrade

    I have a few questions that I can't seem to get answers to from Adobe. I have a MacBook Pro with OS X 10.5.8 with a 2.4GHz Intel Core 2 Duo, 4GB DDR2 SDRam, and GeForce 8600M GT graphics card. I currently have Adobe CS3 on it, but would like to upgra

  • Movement types--warehouse management

    WM movement type 561 not allowed for warehouse number ......this is the error  i am getting while trying to create material stock.....what is the solution for this error plsss assist thanking you Maddy

  • IWeb / DW question

    A friend of mine created a site in iWeb, which I am in the process of rebuilding in DW. We're under an extremely tight deadline and I'm concerned about one very specific point. I don't know much about iWeb, but when you click on one of his links, it