Related Content Field Mapping using "Page Field" mapping type

In PeopleBooks it refers to a Page Field mapping type whene mapping fields from the component to it's related content.
Is this a misprint in PeopleBooks, did this feature not make it into 8.50.09 or is this option only available under certain circumstances.
I'm trying to pass a non key field from level 0 to the rel content url.
Thanks to anyone who can shed some light on this.
Graham

Hi Jim
Thanks for the reply.
It appears that you can't select the "Page Field" mapping type unless you have the related content specified by PAGE ratehr than component.
PBOOKS states Page Field: use when you want to map the service parameter to any level 0 page field.
In the component buffer fields in level 0 could be any page. I was hoping to pass ANY level 0 field through to the Rel Content URL for any page in this component.
Kind regards
Graham

Similar Messages

Is it possible to do message mapping using different namespace message type

Hi all,
Is it possible to do message mapping using different namespaces message types
Example :
i am having message type MT_1 in namespace http://sap.com/abc
and second message type MT_2 in namespace http://partner.com/xyz
so MT_1 can be mapped with MT_2 or not having different namespace.
Thanks

Read through my reply in this thread for Defining Software component dependencies.
Though it explains this for Improted Archives, it also holds true for Message Types to be used in message mappings.
Re: Payload Extraction
Regards
Bhavesh

Problems when I copy a text from master page field to body page field

Hello
I am developing a electronic form and I have experimented a strange bebehavior.
When I try to copy a rawvalue of listbox field from master page to textbox field in body page, this works randomly.
I have this code in the validation of the master page field
--------------------begin code---------------------
if (this.rawValue != null && this.rawValue != "")
if (xfa.form.myform.mysubform.mytextfield.rawValue != this.rawvalue)
xfa.form.myform.mysubform.mytextfield.rawValue = this.rawValue;
--------------------end code---------------------
Somebody know what is wrong?
I am very confused.
Thanks a lot for your help.
Hosting Association
The low cost quality hosting
http://www.hostingassociation.biz

Extra code is one of the pitfalls of using WYSIWYG cutting and pasting,
and using styling in general.
So while it may be interesting to try to reduce the amount of code, there
probably won't be any direct approach without extra steps to get you what
you want with bare bones code that appears as you want it to or at least acceptable.
I guess you might have to take a screen image, clip the relevant portion, since
you can only attach an image file here not a text file.
Posting a screen shot
* http://kb.mozillazine.org/Posting_a_screenshot_on_the_forum#Windows

When I get a date field value using the Oracle thin (type 4) JDBC driver...

....in 'DD-MMM-YY' format from an Oracle 8i database and pass it in to the java.util.Date() constructor, I get a IllegalArgumentException. This error doesn't occur when I use the type 2 driver, so it is apparently a driver-specific thing. It happens on both Win32 and Linux.
Has anyone seen this before? Is there a newer version of the Oracle thin (i.e., type 4) driver than is listed here?
http://web77-02.us.oracle.com/software/tech/java/sqlj_jdbc/content.html
Thanks,
Tom
[email protected]

Yup, that original post didn't make much sense, did it? Let's try again.
I've got an EJB app that runs on WebLogic 6.0 (on Solaris in production, on Win2K for development) and accesses an Oracle 8i database. This app currently uses the Oracle type 2 JDBC drivers. All is well.
So I wanted to see how it would run on Linux. I've got a Redhat 7.1 box handy, so I installed the JDK and WL6.0 and slapped the ear file on there. Problem! Can't deploy because there are no Oracle drivers on this machine!
Makes sense. So I started looking around, and it seems installing Oracle on a RH 7.1 box involves patching glibc and other such nastiness. So let's just try the type 4 JDBC driver - no glibc patch, no shared object libraries, just good 'ol pure Java talking to Oracle on port 1521.
Once I had the URLs and whatnot set up, the app connected to the DB just fine, created the connection pool, read some data, etc. But when my app read a date from the DB and instantiates a new java.util.Date object, I got an IllegalArgumentException - i.e., the date can't be parsed.
"Hmm... that's odd", I thought, so back I went to my trusty Win2K machine, modified my configuration files to use the type 4 driver and - same error! So I switched back to the type 2 driver - and everything works fine, Dates and all. Hmmm.....
As you correctly state, that Date constructor is deprecated and I should use DateFormats and GregorianCalendars and whatnot instead.
But has anyone seen this weird behavior before - code that works fine on a type 2 driver starts throwing exceptions when used with a type 4 driver? Anyone have any solutions?
Thanks much,
Tom

How to uninstall/delete facebook and related content: Logged in using wrong account

Hi everyone. Before I had a chance, my wife logged into her facebook account using the facebook app on my Z10. Now all of her facebook contacts have been imported into my phone as well as all of her notifications appear in the Hub. I've tried:
1) logging out of facebook and logging back in, but my phone seem to be permanently connected to her account (I do not have the option of changing accounts)
2) Searching where these settings are stored on my phone to no avail
3) uninstalling the facebook app: but her messages still appear in the Hub
I want to:
1) Delete all contacts that were inported by facebook
2) Delete my wife's facebook settings on my phone.
Please help. This is more than just a bit annoying.

After 1 day, my wife's facebook account finally appeared until settings>accounts, where I was able to delete it. A few minutes later, my z10 started to cleaned up my contacts list for me. Strange.

Use Pages for template to commercial printer

I created a 20 page, 7x7", perfect bound book in Blurb.com which is primarily pictures with a small amount of text. It has generated a lot of interest since it is very specific to the area in which I live. A local business wants to stock it and claims it can sell "tons" which is appealing. The problem I have is getting the unit price down to a reasonable amount. Even buying in bulk from Blurb I am paying about $8 a unit. I'm exploring commercial printers and if the pricing seems reasonable I will need to transfer the book to a non-proprietary software. Pages is an obvious contender but I'm wondering if folks can share their experiences using Pages for this type of project. I have Photoshop Elements but that seems cumbersome.
Any comments are appreciated. Thanks.

To print your book commercially you will need to reproduce the color faithfully and with all bitmap elements at 300dpi.
Frankly that is difficult to do from Pages which is designed to print to a users' desktop printers and renders certain parts of the output at 72dpi when exported to pdf which is the usual format for commercial printers.
1. See if you can find a commercial printer who will accept a Pages file to run through their RIP directly
2. Always talk to your printer about what they require and what is achievable
3. Commercial offset works off a different price structure than digital printing. Much of the cost is up front and the greater the print run the more the price comes down. Find out how many books you'll have to print before you beat the $8 you have been quoted by blurb.
4. As compensation commercial offset, when done correctly, is markedly better quality than digital
5. Please please please don't use Photoshop Elements or Photoshop they are not DTP software and rendering all your vector objects and text as bitmaps is such a bad idea that of course everyone is doing it now
Peter

Mapping the CMP Fields with the Database Table using Websphere???

Hi,
How to Map the CMP Fields with the Database Table using Websphere
thru ejb.jar.xml???
Thanks,
JavaCrazyLover

Hi,
How to Map the CMP Fields with the Database Table using Websphere
thru ejb.jar.xml???
Thanks,
JavaCrazyLover

LSMW Recording.. Cannot see the fields when going to Field mapping step

Hi all,
I am going a test loading of data with the LSMW and I am doing with a recording. The transaction I have used is related to my company.
When I go to the field mappings step I dont see the field for the target structure with which I can map the source fields..
What may be the problem. Let me know.. If my question is solved, I will award appropirate points.
Thanks,
-Ken

Hi Consu,
Please see, when your recording is over.. it is displayed right?
The moment it is displayed, there on same screen either click on 'DEFAULT ALL " button on application toolbar or go to menu path edit--> default all.when u create recording u can click on this button but when it is assigned to your project , this option become disabled , so crate a new recording and follow above steps.
Best of luck
Thanks,
Billy

Metadata fields like Tags, page ID etc not available for a Content in Content Server info.

Hi,
Am trying to build a Webcenter Portal application with the help of a tutorial. This requires to upload files to Content Server and use these files to build the app. and to link the navigations for menu and sub-menus.
I have checked in the files manually into Webcenter Content but when checked for the Content Information, metadata fields like Tags, Page ID, Websites etc are not displayed.
These fields are necessary to relate to the Content Management Interoperability Services (CMIS) query used in application.
The tutorial link am referring to is : Connecting to and Managing Content Repositories - 11g Release 1 (11.1.1.6.0)
Content Management system server version is: 11gR1- 11.1.1.7.0
Please let me know if am missing something.
Thanks in advance!
Regards,
Nivedana

Thanks Naresh. It worked.
Can you please suggest few good links to gain more knowledge on UCM. I have tried a few, but not good enough.
Thanks,
Nivedana

Join 2 fields into one to map to destination field

Hi! Is it possible to join data in 2 fields into one to map to the destination field? I have image file name kept in one field and want to prefix with a URL which I hope to maintain in a manually added field. Alternatively, it will be great to be able to prefix the image filename with the URL to be mapped to the image destination field.
Any help is very much appreciated.
Thanks!
SF

Hi,
Yes it is possible to combine values from two fields to map a single field of MDM repository using Import Manager. This feature of Import manager is called as Field Partitioning.
You can do it by following below mentioned steps:
1. Open import manager and connect to source file.
2. Specify source and destination tables. expand Source Table under source Hierarchy in Import Manager. And click on first field to select it.
3. Now Go to "Partition Field/Value" tab. In the Source Partition sub Pane you will see your First Field under "partition by" (* because you select first field from source hierarchy).
4. From source Partition sub pane under "Available Fields" select the second field and click on "Add". This will bring second field also under "partitioned By".
5. Now select both Fields under "partition by" and right click and select "Combine" (*Combine option will be enabled only when more than 1 field is selected by "partition By"
6. Once you select Combine, it will combine values from both Fields. Again right click and select "Set combine delimiter" and specify the required value delimiter.
7. Now Go to "Map Field /Values" tab. You will see one more field (*starting with the name of your first field and ending with partition word. Map this field to the required destination field.
8. Follow other normal steps for data import and import data. after data import check data in data manager. you will get combined values from 2 source field in the MDM field.
Check Page no 203 of [import manager reference guide |http://help.sap.com/saphelp_nwmdm71/helpdata/en/4b/72b8e7a42301bae10000000a42189b/MDMImportManager71.pdf]for more details.
Please revert if you face any issue.
Regards,
Shiv
Edited by: Shiv Prashant Dixit on Mar 11, 2010 9:53 AM

How to Map the Unit field in case of DSO and INFOCUBE

Dear Experts,
I have a issue ,Please help me to solve this
I have DSO as provider ,
And, i have to map transformations btw the Datasource and DSO.
In generic Data source, i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
and normal Quantity fields like KWMNG,OAUME(quantity related),OAUWE (value related).
In DSO data fields as Key figure info objects like 0Quantity (which have 0Unit as unit of measure) and some other key figures which have there respective unit of measure in info object definition.
So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
(How it will be for both DSO and Info cube is there any difference?)
Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

Navasamol ,
If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
And i have seen the Quantity fields and there respective unit fields are mapped directly to key figure info object
in case of Info cube . Its working fine .
If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
why this difference btw DSO and Info cube can any one explain me in detail.
Expecting your valuable suggestions.
Thanks & Regards,
Anjunath Naidu
Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

Mapping - Checking 3 fields to change IDOC

Hello,
I am triggering a new IDOC whenever the source field1 changes as below.
field1 -> removecontext -> splitbyvalue [value change] -> collapsecontext -> IDOC
If i need to check for 2 more fields field2 & field3 and if any one of these 3 field changes trigger the creation of new IDOC field?
How do I map the other two fields to IDOC?
Thanks,
Hari

Hi,
Since we can not map the target IDOC when any of the field changes using nodefunctions , you can write UDF and check the same i.e if field1 changes or field2 changes or field3 changes then trigger new IDoc. This is one of the options that you can try...please try it once.
Regards
Priyanka

Mapping ECC PO fields to R/3 PO fields

Hi Experts,
I was trying map ECC Po fields to R/3 fields which are not mapping in standard way automatically. Like Tracking No and Good Recipient name.
I am using the BADI BBP_ECS_PO_OUT_BADI to map these fields.
However i am able to map and see those fields in the back end.
The same thing i was trying to do for the Text fields. Suppose, mapping vendor text to item text .these fields are not able to transfer through this BADI.
for this i am using the BADI BBP_PO_INBOUND_BADI in R/3 to map these fields . I am able to map and see those text fields in R/3 also. But wonder now i am not able to see Tracking No and Good Recipient name fields in R/3 .
Any pointer to solve this issue, really a help for me.
Thanks in Advance.

Hi Disha ,
Thank you so much for your reply ,
Actually i have implemted the BBP_ECS_PO_OUT_BADI this BADI only in SRM side .When i have implemeted i can see Tracking No and Goods recipient are mapping correctly in Back End . But the thing is only the text fields are not mapping the correctly. though code was correct .
So i have implemeted the BBP_PO_INBOUND_BADI BADI in the R/3 side , through this one i can able to map the text fiedls , where as this time Tracking No and Goods recipient are not mapping .Any pointers for this , will really help for me .
*See my code for BBP_ECS_PO_OUT_BADI*
*Vendor text at line item level of SRM PO should be passed to
*u2018Item Textu2019 at R/3 PO line item level.
LOOP AT it_item INTO WA_PO_ITEM.
    Read table IT_LONGTEXT into wa_LONGTEXT with key Guid = WA_PO_ITEM-guid
                                                     tDid = 'ITXT'.
    IF SY-SUBRC EQ 0.
      W_PO_ITEM_TEXT-PO_NUMBER = WA_PO_ITEM-BE_OBJECT_ID.
      W_PO_ITEM_TEXT-PO_ITEM = WA_PO_ITEM-NUMBER_INT+5(5).
      W_PO_ITEM_TEXT-TEXT_ID   = 'F01'.
      W_PO_ITEM_TEXT-TEXT_FORM = '*'.
      W_PO_ITEM_TEXT-TEXT_LINE = WA_LONGTEXT-TDLINE.
      APPEND W_PO_ITEM_TEXT TO CT_BAPI_POITEM_TEXT.
    ENDIF.
*Internal Note at line item level of SRM PO should be passed to
*u2018Info record noteu2019 at line item level of R/3 PO
    Read table IT_LONGTEXT into wa_LONGTEXT with key Guid = WA_PO_ITEM-guid
                                                       tDid = 'NOTE'.
    IF SY-SUBRC EQ 0.
      W_PO_ITEM_TEXT-PO_NUMBER = WA_PO_ITEM-BE_OBJECT_ID.
      W_PO_ITEM_TEXT-PO_ITEM = WA_PO_ITEM-NUMBER_INT+5(5).
      W_PO_ITEM_TEXT-TEXT_ID   = 'F06'.
      W_PO_ITEM_TEXT-TEXT_FORM = '*'.
      W_PO_ITEM_TEXT-TEXT_LINE = WA_LONGTEXT-TDLINE.
      APPEND W_PO_ITEM_TEXT TO CT_BAPI_POITEM_TEXT.
    ENDIF.
ENDLOOP.
*Vendor Text at PO header level should be passed onto R/3 PO header text field.
Read table IT_LONGTEXT into wa_LONGTEXT with key Guid = IS_HEADER-GUID
                                                   tDid = 'HTXT'.
IF SY-SUBRC EQ 0.
    WA_Header_text-PO_NUMBER = IS_HEADER-BE_OBJECT_ID.
   WA_Header_text-PO_ITEM = WA_PO_ITEM-NUMBER_INT+5(5).
   WA_Header_text-PO_ITEM+4(1) = '0'.
    WA_Header_text-TEXT_ID   = 'F02'.
    WA_Header_text-TEXT_FORM = '*'.
    WA_Header_text-TEXT_LINE = WA_LONGTEXT-TDLINE.
    APPEND WA_Header_text TO CT_BAPI_POHEADER_TEXT.
ENDIF.
*Map the Tracking No
LOOP AT it_item INTO WA_PO_ITEM.
    Read table CT_BAPI_POITEM into WA_BAPI_ITEMS with key PO_ITEM = WA_PO_ITEM-NUMBER_INT+5(5).
    WA_BAPI_ITEMS-TRACKINGNO = WA_PO_ITEM-BE_TRACKING_NO.
    MODIFY TABLE CT_BAPI_POITEM FROM WA_BAPI_ITEMS TRANSPORTING trackingno.
ENDLOOP.
*The user id of the Partner Function u2018Goods recipientu2019 is map to
*R/3 Goods Recipient field
LOOP AT it_item INTO WA_PO_ITEM.
    Read table IT_PARTNER into wa_partner with key P_GUID = WA_PO_ITEM-guid
                                                   PARTNER_FCT = v_grfun.
    IF SY-SUBRC EQ 0.
      SELECT SINGLE CHUSR
             FROM BUT000
             INTO v_grname
             WHERE PARTNER_GUID = WA_PARTNER-PARTNER_NO.
      Read table CT_BAPI_POACCOUNT into WA_POACCOUNT with key PO_ITEM = WA_PO_ITEM-NUMBER_INT+5(5).
      WA_POACCOUNT-GR_RCPT = V_GRNAME.
      MODIFY TABLE CT_BAPI_POACCOUNT FROM WA_POACCOUNT TRANSPORTING GR_RCPT.
    ENDIF.
ENDLOOP.
endmethod.
See my code BBP_PO_INBOUND_BADI
APPEND LINES OF bbp_potextheader TO bapi_potextheader.
APPEND LINES OF BBP_POTEXTITEM TO BAPI_POTEXTITEM.
Evem i tried to map these traking no and good recipient fields in the R/ 3 , I have this piece of code in the Back end , But couldnt work for me.
LOOP AT BBP_POITEM INTO WA_BBP_POITEM.
   Read table BAPI_POITEM into WA_BAPI_POITEM with key PO_ITEM =
          WA_BBP_POITEM-PO_ITEM.
   WA_BBP_POITEM-TRACKINGNO = WA_BBP_POITEM-TRACKINGNO.
MODIFY table BAPI_POITEM FROM WA_BAPI_POITEM TRANSPORTING trackingno
   Read table BBP_POACCOUNT into wa_BBP_POACCOUNT with key PO_ITEM =
           WA_BBP_POITEM-PO_ITEM.
   wa_BAPI_POACCOUNT-GR_RCPT = wa_BBP_POACCOUNT-GR_RCPT.
   MODIFY table BAPI_POACCOUNT FROM wa_BBP_POACCOUNT TRANSPORTING
GR_RCPT.
ENDLOOP.
Loop at BAPI_POITEM into wa_BAPI_POITEM.
   Read table BAPI_POITEMX into wa_BAPI_POITEMX with key PO_ITEM =
wa_BAPI_POITEM-PO_ITEM.
   wa_BAPI_POITEMX-TRACKINGNO = 'X'.
MODIFY table BAPI_POITEMX FROM wa_BAPI_POITEMX TRANSPORTING TRACKINGNO
Read table BAPI_POACCOUNTX into wa_BAPI_POACCOUNTX with key PO_ITEM =
wa_BAPI_POITEM-PO_ITEM.
   wa_BAPI_POACCOUNTX-GR_RCPT = 'X'.
   MODIFY table BAPI_POACCOUNTX FROM wa_BAPI_POACCOUNTX TRANSPORTING
GR_RCPT.
Endloop.

Need your assistance in mapping Structure and Field in DME Tree

Hello Friends - I need your help in "Mapping from structure field" in DME.
In the existing format tree, It is mapped Structure as "FPAYP" and Field name "BNAME" to populate Company Code name in the Payment file.
Now I am asked to change this to populate value either from OX02 or OX15.
When Company Code name was maintained, It was maintained in short and in the address tab, Full name is maintained.
Please let me know which Structue and Field I should assign to pull the value either from OX02 or OX15.
Thanks for your help.

Thanks a lot Henri/Lakshmi.
I have maintained mapping procedure Sturecture/field - FPAYHX/AUST1 to get the CoCd name in the file. In AUST1, Length of the CoCd is more than 18, and as per Bank format, It should be 18 characters in length.
User is not happy that complete CoCd name is not populated in the file. He has come up with an alternative and shortened the CoCd name that needs to be populated in the file and suggested us to get the value into the payment file. We should not replace CoCd name with the name he suggested in OX02/OX15,FBZP.
My doubt is that if there is any filed I can use to maintain the name he suggested and assign it in mapping procedure.
Thanks

How to map user-defined fields in XML communication on SRM site

Hi All!
We use the External sourcing scenario and we transfer requirements from ERP in SRM through XI (PurchaseRequestERPSourcingRequest_In)
We should transfer the user-defined fields, but we can not map it in SRM site.
We have enhanced enterprise service in XI, have realized BADI PUR_SE_PRERPSOURCINGRQCO_ASYN on ERP site.
I see the XML message with ours z-fields in tr. SXI_MONITOR (into SRM), but I can not find it in BBP_PDISC.
We try to use BADI BBP_SAPXML1_IN_BADI (there is no method for SC), and BADI /SAPSRM/BD_SOA_MAPPING (z-fields is empty)
Someone can tell how to map user-defined field for SC?
Thanks in advance
Evgeny Ilchenko

Hello, Julia
We have found solution our problem
We have enhanced standard service in a new enhancement name space and defined own enhancement elements in our namespaces. Then these enhancement elements refered to the SAP standard Enterprise Service.
But In our new interfaces were different XML namespaces
When we have correct an error we could use the next BADI
on ERP site: PUR_SE_PRERPSOURCINGRQCO_ASYN
on SRM site: /SAPSRM/BD_SOA_MAPPING
BR,
Evgeny

Related Content Field Mapping using "Page Field" mapping type

Similar Messages

Maybe you are looking for