RELATIONSHIP BETWEEN VBAK/VBAP AND V46R_HEAD TABLE

Hi,
can you please tell me that is there any relationship between VBAK and  V46R_HEAD TABLE or VBAP and V46R_HEAD TABLE table.
where V46R_HEAD TABLE is a structure and i want to display sme fields of vbak and some of V46R_HEAD  and some of VBAP.
I got the relation between VBAK and VBAP ie. the field VBELN. But i am not getting the relation with V46R_HEAD sturcture.
Please help me to solve this problem.

Hi,
the field vbeln is present in V46R_HEAD also.
Please check it!!  Please do a CTR+F and look for VBELN.
Regards.

Similar Messages

  • Reading VBAK, VBAP and VBFA table during a process

    Hi friends,
    I have an execution DUMP in a Z report, so I would be very thankful if you can give me your expert opinion.
    I have a Z report which collects some information into an internal table. After that, I need to go over each record and read VABK, VBAP and VBFA tables and compute some quantities. It is not possible to do this in another way because I need to get some information first.
    Of course, each table is being read in the corresponding sequence (1st VBAK, then VBAP and then VBFA and at the end LIPS table) using the key or part of it. The problem is that if the user wants to execute the report online, it will be finish in a dump at this routine.
    My question is if it is possible to skip the dump getting VBAK and VBAP tables in memory and instead of reading directly, read them from memory. Notice that if I do this I need to put almost the entire table into memory. So, do you think that I will earn time or it will be the same or worse?
    Thanks in advance & kind regards,
    MMP.

    Hi everybody!
    We applied the note but it doesn't help. We realized that we have a problem with records quantity, so the key user is going to analyze which other parameter could be helpful.
    Thank everybody very much!
    Kind regards.

  • What is the relationship between OPOR, OPDN and OIGE Table ?

    Dear Experts,
    We want to develop one report as per project wise Item Consumtion.
    We want data from Purchase Order, Goods Receipt PO and Issue for Production.
    The purpose of this report is to find out that what item should create PO
    and based on that PO what the GRN should be taken
    and based on that GRN this particular item should used for that project
    which mentioned in GRN at the time of Item selection.
    We develop an Query for that but this query are not as per standard process to get data.
    select
    OPOR.CardCode as VendorCode, OPOR.CardName as VendorName,
    POR1.ItemCode as POItemCode, POR1.Dscription as POItemDesc,
    OPOR.DocNum as PONo, OPOR.DocDate as PODate, OPOR.DocDueDate as PODueDate,
    POR1.Project, POR1.OpenQty as PendingQty, POR1.Quantity as POQty,
    PDN1.Quantity as GRNQty, IGE1.Quantity as IssueQty,
    ((POR1.PriceBefDi-(POR1.PriceBefDi*POR1.DiscPrcnt/100))*POR1.Quantity) as 'POPrice'
    from OPOR
    inner join POR1 on
    POR1.DocEntry=OPOR.DocEntry
    LEFT JOIN PDN1 ON
    POR1.DocEntry= PDN1.BaseEntry AND
    POR1.LineNum=PDN1.BaseLine
    Inner JOIN OPDN ON
    PDN1.DocEntry = OPDN.DocEntry
    Left join IGE1 on
    IGE1.ItemCode=PDN1.ItemCode and
    IGE1.Project=PDN1.Project
    WHERE 
    POR1.Project='{?Project}'
    Can anybody tell me that how i can create standard query as per SAP Standards.
    Thanks & Regards,
    Nishit Makadia

    Hi,
    Try this query for production order issued serial number.
    SELECT T0.[DocNum] as Prod#, T0.[CardCode] as CustCode,T0.[OriginNum] as SO#,T0.[Project] as JobNo, T0.[ItemCode], T1.[ItemCode], T1.[IssuedQty], T3.[IntrSerial],T0.[Comments] as Remark
    FROM OWOR T0  INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry left join  SRI1 T2 on  T2.[BsDocEntry] = t0.docentry and T1.[LineNum] = T2.[BsDocLine] inner join  OSRI T3 ON T2.SysSerial = T3.SysSerial and t3.itemcode = t2.itemcode
    WHERE T2.[BsDocType]  = '202' and  T0.[Project]  = [%0] and  T2.[BaseType] = '60' and T0.[Status] IN ('r','l')
    GROUP BY T0.[DocNum], T0.[ItemCode], T1.[ItemCode], T1.[IssuedQty], T3.[IntrSerial],T0.[Project],T0.[CardCode],T0.[OriginNum],T0.[Comments] order by T0.[DocNum]
    Thanks & Regards,
    Nagarajan

  • In which table we can find the relationship between Role id and Task id

    Hi Experts,
    In which table we can find the relationship between Role id and Task id in Cprojects.
    Thanks
    Subhaskar

    Hi Subhaskar,
    Apart from DPR_ENTITY_LINK , you can also get it from table DPR_PART.
    Please go through the below link
    http://wiki.sdn.sap.com/wiki/display/PLM/cProjectstablesin+SAP
    I hope this will help you.
    Regards,
    Rahul

  • Table name having relationship between Business area and Profit Center

    Hi guys,
    Can you tell me the table name showing the relationship between Business area and Profit Center in fb60  transaction.
    thnx
    hema

    HI.
    BSEE u2013GSBER  Business area.
    BSID-PRCTR Profit center
    Regards.
    jay

  • Relationship between Role id and Task id table name?

    Hi
    In which table we can find the relationship between Role id and Task id in saphcm
    Thanks a
    vibin

    Hi,
    HRP1001 --Infotype 1001 DB Table (Relationships)
    Regards,
    mohammed

  • Table relationship between Profit Center and G/L account.

    Hi,
    I have an issue related to wrong profit centers. We have a workflow that updating the profit center to a G/L account regarding the business of Reverse Logistic. In that business, we shift from a G/L account to another G/L account.
    Now I have to find the tables relationship between Profit center and G/L account, which contains the correct relationship between a profit center and a G/L account, so that I can profit centers related to the moved G/L account and the original G/L account.
    Thank you.
    Moderator: Please, search before posting

    Hi
    The Posted data can be seen in BSEG & GLPCA/FAGLFLEXA
    The default assignment of GL & PC can be seen in 3KEH / FAGL3KEH
    br, Ajay M

  • Sales Document from VBAK ,VBAP and VEDA

    Hi ,
    I need to fetch the Sales Document from VBAK and VBAP and VEDA with the contract sign date for sales document line item .
    Contract sign date is in selection screen as select options.
    Please let me know how to fetch the sales Document per line item from these 3 tables considering that A sales document could have many line items and each can have a different sign date.
    Thanks
    Sachin

    Hi,
    The link between all the tables VBAK, VBAP and VEDA is VBELN i.e sales document number.
    However, while fetching from VBAP and VEDA you would need to consider POSNR as well.
    As your ABAPer to code the logic using 'for all entries' method.
    Regards,
    Amit
    Edited by: Amit Iyer on Jun 23, 2011 12:28 PM

  • How to create the relationship between ESSBASE 11 and DM in OBIEE11

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok.
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the relationship between ESSBASE 11 and DM  in OBIEE 11G?

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • What is the difference between standard,sorted and hash table

    <b>can anyone say what is the difference between standard,sorted and hash tabl</b>

    Hi,
    Standard Tables:
    Standard tables have a linear index. You can access them using either the index or the key. If you use the key, the response time is in linear relationship to the number of table entries. The key of a standard table is always non-unique, and you may not include any specification for the uniqueness in the table definition.
    This table type is particularly appropriate if you want to address individual table entries using the index. This is the quickest way to access table entries. To fill a standard table, append lines using the (APPEND) statement. You should read, modify and delete lines by referring to the index (INDEX option with the relevant ABAP command). The response time for accessing a standard table is in linear relation to the number of table entries. If you need to use key access, standard tables are appropriate if you can fill and process the table in separate steps. For example, you can fill a standard table by appending records and then sort it. If you then use key access with the binary search option (BINARY), the response time is in logarithmic relation to
    the number of table entries.
    Sorted Tables:
    Sorted tables are always saved correctly sorted by key. They also have a linear key, and, like standard tables, you can access them using either the table index or the key. When you use the key, the response time is in logarithmic relationship to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique, or non-unique, and you must specify either UNIQUE or NON-UNIQUE in the table definition. Standard tables and sorted tables both belong to the generic group index tables.
    This table type is particularly suitable if you want the table to be sorted while you are still adding entries to it. You fill the table using the (INSERT) statement, according to the sort sequence defined in the table key. Table entries that do not fit are recognised before they are inserted. The response time for access using the key is in logarithmic relation to the number of
    table entries, since the system automatically uses a binary search. Sorted tables are appropriate for partially sequential processing in a LOOP, as long as the WHERE condition contains the beginning of the table key.
    Hashed Tables:
    Hashes tables have no internal linear index. You can only access hashed tables by specifying the key. The response time is constant, regardless of the number of table entries, since the search uses a hash algorithm. The key of a hashed table must be unique, and you must specify UNIQUE in the table definition.
    This table type is particularly suitable if you want mainly to use key access for table entries. You cannot access hashed tables using the index. When you use key access, the response time remains constant, regardless of the number of table entries. As with database tables, the key of a hashed table is always unique. Hashed tables are therefore a useful way of constructing and
    using internal tables that are similar to database tables.
    Regards,
    Ferry Lianto

  • What is the differences between Transparent,Pooled and Cluster tables?

    Hello all,
    What is Pool table?What is the differences between Transparent,Pooled and Cluster tables?
    Regards!
    Purna

    Transparent table:
    Tables can be defined independently of the database in the ABAP Dictionary. The fields of the table are defined together with their (database-independent) data types and lengths.
    A table definition in the ABAP Dictionary has the following components:
    Table fields: The field names and the data types of the fields contained in the table are defined here.
    Foreign keys: The foreign keys define the relationships between this table and other tables.
    Technical settings: The technical settings define how the table is created on the database.
    Indexes: Indexes can be defined for the table to speed up data selection from the table.
    There are three categories of database tables in the ABAP Dictionary.
    A physical table definition is created in the database for the table definition stored in the ABAP Dictionary for transparent tables when the table is activated. The table definition is translated from the ABAP Dictionary to a definition of the particular database.
    On the other hand, pooled tables and cluster tables are not created in the database. The data of these tables is stored in the corresponding table pool or table cluster. It is not necessary to create indexes and technical settings for pooled and cluster tables.
    Pooled table
    Pooled tables can be used to store control data (e.g. screen sequences, program parameters or temporary data). Several pooled tables can be combined to form a table pool. The table pool corresponds to a physical table on the database in which all the records of the allocated pooled tables are stored.
    Cluster table
    Cluster tables contain continuous text, for example, documentation. Several cluster tables can be combined to form a table cluster. Several logical lines of different tables are combined to form a physical record in this table type. This permits object-by-object storage or object-by-object access. In order to combine tables in clusters, at least parts of the keys must agree. Several cluster tables are stored in one corresponding table on the database.
    Regds,
    Manohar

  • Relationship between material type and industry sector

    Hi experts
    when using t-code mm01,there are two fields material type and industry setor in screen.Is there any relationship between material type and industry sector? I want to know if user be able to see the material type related to particular industry sector?
    thanks in advance!

    Hello
    There is no direct relationship between the material type and the industry sector.
    The industry sector is used only for field sttus maintenance (fields in display/optional/requierd entry) in transactions.
    We will assign seperate field reference groups to industry sectors and deopending on how we configure the field references, the fields will appear for the materials created for that industry sector.
    regards

  • Relationship between logical system and a client

    Hi,
    Our internal notes say that, in order to create a new client, I must do the following:
    1. Create a logical system using BD54. The client name must be SID + "CLNT" + number. In my case, this would be NSPCLNT100.
    2. Create a client using SCC4.
    Questions:
    1. What is the relationship between the client and the logical system?
    2. How does SAP know that client number 100 must be related to NSPCLNT100? I am not specifying this relationship anywhere.
    Thank you in advance for your help.
    Regards,
    Peter

    you assing logical system to a client from SCC4

  • Question the relationship between AR invoice and Outgoing payment

    Dear All,
    Does anyone the know the the relationship between AR invoice and Outgoing payment? because I would like to print the report in specific date range. For example, today is 02 July 2009. I want to print "AR invoice as at 31 Mar 2009", by using SQL. It seems like date back.
    From Samson

    Hi Samson,
                      Even i haven't done much r n d  bout this but what i came to know is that, there might be a scenario where you may want to make a payment to your customer. In this case we can use the Outgoing payment for the same. The system doesnt stop you from doin so. I have seen this in SAP B1 2005B, PL34.
    Regards,
    Joseph

Maybe you are looking for

  • Inspection Lot not generated, with MIGO 561

    Hello All, Please help me with this issue. WHen i do MIGO with 561, inspection lot is not generated. So there is a setting in spro, if we check that, inspection lot wont be generated. So now in my IDES, i tried to uncheck that box. When i save this s

  • Cannot install windows on bootcamp

    I have leopard os with bootcamp and a new windows xp sp2 disk. i cannot install windows on bootcamp. it says that i am missing a component. any tips?

  • RAM and or Memory Question

    Hello, I have a Mac Mini (2011), and I just purchase it Tuesday, brand new. I got the i5 Model, and it came with 2gb of RAM. I got Final Cut Pro X, knowing I would need more RAM, before I even ran the program. My question is I have the DDR3 1gb card'

  • Discoverer 10.1.2.1 Formatting is SLOW

    Hello, When I try to format or edit headings or data, it takes FOREVER for it to come back. Is their a fix for this. Any info would be greatly appreciated. We are running the appserver on a pair of 4 processor 3.2 GHZ Intel boxes with 12 GB of memory

  • InDesign 5 'quit unexpectedly' after deleting preferences & even reinstalling

    InDesign 5, after restarting my computer this morning, keeps crashing immediately when I try to open the software. I have no idea why because it worked fine before the restart. I tried deleting (all of them indicating from the forums) preferences: ~/