Relaying not allowed but mappings seem fine

Hi,
we are running messaging server 5.2 on windows 2000 server. (actually we have 2 servers for 2 different domains, but configured exactly the same)
I have the following problem: on one of the 2 servers, i can't send mail to external mail servers (error is: 5.7.1 relaying not allowed).
However, the mappings file seems ok:
i connect from ip 172.21.3.217, and this is the internal_ip bit of the mappings file:
INTERNAL_IP
$(172.16.208.4/32) $Y
127.0.0.1 $Y
$(172.21.0.0/16) $Y
* $N
the problem arose when i tried to add another subnet. i added it, did a imsimta refresh, and from then on, it wouldn't work anymore.
since then, i also did a imsimta cnbuild, imsimta restart job_controller, even rebooted the machine. no go.
when i'm logged on to the server and i telnet to port 25 (localhost), it works ok.
any suggestions ? this is driving me crazy.
i can only send mail via outlook express with authentication enabled, but we have some tools that can't handle this authentication stuff, so these apps simply refuse to send mail.
another thing, this mail server also insists on connecting to the client on port 113 (auth) before granting access, the other mail server doesn't do this. so apparently there are differences between them, but i don't know where to look.
any ideas please please ?
Tom.
220 galaxy-fits.fitstc.net -- Server ESMTP (iPlanet Messaging Server 5.2 HotFix
1.09 (built Jan 7 2003))
mail from: [email protected]
250-2.5.0 No HELO/EHLO seen; continuing anyway, "port 1347"@BEBRW323.ccntc.atos.
be.
250 2.5.0 Address Ok.
rcpt to: [email protected]
550 5.7.1 Relaying not allowed: [email protected]

Is it possible you have "mustsalsserver" configured on your smtp channel? The default is maysaslserver which allows Athenticated SMTP and normal SMTP. If you have mustsasl... You must use Athenticated SMTP.

Similar Messages

Email was working fine. Now not working even though nothing changed. Deleted acct turned off iPad turned on and added account again. Can receive mail but not send. Sometimes says relay not allowed sometimes different message.

Email was working fine. Now not working even though nothing changed. Deleted acct turned off iPad turned on and added account again. Can receive mail but not send. Sometimes says relay not allowed sometimes different message.

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if you can then send emails

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no avail

Before doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

Address list error -- 5.7.1 Relaying not allowed

Hi,
We have setup the Java Messaging Server to send/recieve mails from a gateway. The inbound mail flow works perfectly but, the outbound mail flow has issues.
The outbound mails are not hitting the gateway. When checked the log for outbound mail, it displays the address list error - 5.7.1 Relaying not allowed for any domain i.e gmail.com, etc
version:
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS P1192FLPLN 5.9 Generic_118558-02 sun4u sparc SUNW,Sun-Fire
here is the log for reference...
=========================================================================
root@P1192FLPLN # /opt/SUNWmsgsr/sbin/imsimta test -rewrite -debug -source_channel=tcp_local [email protected] [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
17:09:37.43: Debug output enabled, system P1192FLPLN.extmail.xyz.com, process 3fbf.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:15:38
17:09:37.43: mmc_winit('tcp_local','[email protected]','') called.
17:09:37.43: Address reversal invoked on [email protected], force reverse URL 1, capture 1
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.43: Rewrite: "$*", position 0, hash table -
17:09:37.43:   Found: "$A$E$F$U%[email protected]"
17:09:37.43:   Rewrite failed, not forward.
17:09:37.43: Rewrite: "$*", position 1, hash table -
17:09:37.43:   Failed.
17:09:37.43: Rewrite: "$*", position 0, rewrite database -
17:09:37.43:   Failed
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.43: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.43:   Found: "$U%[email protected]"
17:09:37.43:   New mailbox: "abhishek.sen".
17:09:37.43:   New host: "extmail.xyz.com".
17:09:37.43:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   - found on channel l
17:09:37.43: Routelocal flag set; scanning for % and !
17:09:37.43:   Checking reverse URL cache for: [email protected]
17:09:37.43:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.48:   Resulting URL: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: mmc_open_url called to open ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
17:09:37.49:   URL with quotes stripped: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49:   LDAP URL identified
17:09:37.49: URL context #1 will be used
17:09:37.49:   Performing URL search on: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.53: mmc_read_url result: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53:   URL resolution returned: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: mmc_read_url result: [preferredlanguage] en
17:09:37.53:   URL resolution returned: [preferredlanguage] en
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced preferred language en
17:09:37.53: mmc_read_url result: [mailmsgmaxblocks] 700
17:09:37.53:   URL resolution returned: [mailmsgmaxblocks] 700
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced blocklimit 700
17:09:37.53: mmc_read_url result: [mail] [email protected]
17:09:37.53:   URL resolution returned: [mail] [email protected]
17:09:37.54:       Attribute index: 0
17:09:37.54:       LDAP URL produced address [email protected]
17:09:37.54:   No more results to return
17:09:37.54:     Override postmaster: [email protected]
17:09:37.54:     Preferred language en
17:09:37.54:     Content return block limit now 700
17:09:37.54:   Mapped return address: [email protected]
17:09:37.54:   from_access mapping check: ||MAIL|tcp_local|[email protected]|
17:09:37.54: Queue area size 73232902, temp area size 2067314
17:09:37.54:   18308225 blocks of effective free queue space available; setting disk limit accordingly.
17:09:37.54:   1033657 blocks of free temporary space available; setting disk limit accordingly.
17:09:37.54:       - passed.
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.54: Rewrite: "$*", position 0, hash table -
17:09:37.54:   Found: "$A$E$F$U%[email protected]"
17:09:37.54:   Rewrite failed, not forward.
17:09:37.54: Rewrite: "$*", position 1, hash table -
17:09:37.54:   Failed.
17:09:37.54: Rewrite: "$*", position 0, rewrite database -
17:09:37.54:   Failed
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.54: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.54:   Found: "$U%[email protected]"
17:09:37.54:   New mailbox: "abhishek.sen".
17:09:37.54:   New host: "extmail.xyz.com".
17:09:37.54:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   - found on channel l
17:09:37.56: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
17:09:37.56: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.56: Rewrite: "$*", position 0, hash table -
17:09:37.56:   Found: "$A$E$F$U%[email protected]"
17:09:37.57:   Rewrite failed, not envelope.
17:09:37.57: Rewrite: "$*", position 1, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "$*", position 0, rewrite database -
17:09:37.57:   Failed
17:09:37.57: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.57: Rewrite: "xyz.com", position 0, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.59:   Failed
17:09:37.59: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.59: Rewrite: "*.com", position 0, hash table -
17:09:37.59:   Failed
17:09:37.59: Rewrite: ".com", position 0, hash table -
17:09:37.59:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.59:   New mailbox: "bhanu.prasad".
17:09:37.59:   New host: "xyz.com".
17:09:37.59:   New route: "TCP-DAEMON".
17:09:37.59:   New channel system: "TCP-DAEMON".
17:09:37.59: Looking up host "TCP-DAEMON".
17:09:37.60:   - found on channel tcp_local
17:09:37.60: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.60: Rewrite: "$*", position 0, hash table -
17:09:37.60:   Found: "$A$E$F$U%[email protected]"
17:09:37.60:   Rewrite failed, not envelope.
17:09:37.60: Rewrite: "$*", position 1, hash table -
17:09:37.60:   Failed.
17:09:37.60: Rewrite: "$*", position 0, rewrite database -
17:09:37.60:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.61: Rewrite: "xyz.com", position 0, hash table -
17:09:37.61:   Failed.
17:09:37.61: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.61:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.61: Rewrite: "*.com", position 0, hash table -
17:09:37.61:   Failed
17:09:37.61: Rewrite: ".com", position 0, hash table -
17:09:37.63:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.63:   New mailbox: "bhanu.prasad".
17:09:37.63:   New host: "xyz.com".
17:09:37.63:   New route: "TCP-DAEMON".
17:09:37.63:   New channel system: "TCP-DAEMON".
17:09:37.63: Looking up host "TCP-DAEMON".
17:09:37.63:   - found on channel tcp_local
17:09:37.63:   Rewrite rules result: [email protected]
17:09:37.63:   Checking reverse URL cache for: [email protected]
17:09:37.63:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.65:   URL generation failed, status = 0
*** Debug output from rewriting a forward envelope address:
17:09:37.65: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.65: Rewrite: "$*", position 0, hash table -
17:09:37.65:   Found: "$A$E$F$U%[email protected]"
17:09:37.65:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.65:     old state = not checked.
17:09:37.65:     Domain check on xyz.com.
17:09:37.66:     Could not add domain result 0 to cache for xyz.com.
17:09:37.66:     new state = fail pending.
17:09:37.66:   Rewrite failed due to prechannel mismatch.
17:09:37.66: Rewrite: "$*", position 1, hash table -
17:09:37.66:   Failed.
17:09:37.66: Rewrite: "$*", position 0, rewrite database -
17:09:37.66:   Failed
17:09:37.66: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.66: Rewrite: "xyz.com", position 0, hash table -
17:09:37.66:   Failed.
17:09:37.67: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.67:   Failed
17:09:37.67: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.67: Rewrite: "*.com", position 0, hash table -
17:09:37.67:   Failed
17:09:37.67: Rewrite: ".com", position 0, hash table -
17:09:37.67:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.67:   New mailbox: "bhanu.prasad".
17:09:37.67:   New host: "xyz.com".
17:09:37.67:   New route: "TCP-DAEMON".
17:09:37.69:   New channel system: "TCP-DAEMON".
17:09:37.69: Looking up host "TCP-DAEMON".
17:09:37.69:   - found on channel tcp_local
address channel        = tcp_local
forward channel        = tcp_local
channel description    =
channel caption        =
channel user filter    =
dest channel filter    =
source channel filter =
channel flags #0       = BIDIRECTIONAL SINGLE_SYSTEM IMMNONURGENT NOSERVICEALL channel flags #1       = SMTP_CRLF MX IDENTNONENUMERIC DEFAULT
channel flags #2       = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3       = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4       = EIGHTNEGOTIATE HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5       = TRUNCATESMTPLONGLINES
channel flags #6       = LOCALUSER REPORTNOTARY
channel flags #7       = SWITCHCHANNEL REMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8       = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9       = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALNONE NOTURN
defaulthost            = extmail.xyz.com extmail.xyz.com
linelength             = 998
addrsperfile           = 99
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = tcp-daemon
channel queue 0 name   = SMTP_POOL
channel queue 1 name   = SMTP_POOL
channel queue 2 name   = SMTP_POOL
channel queue 3 name   = SMTP_POOL
channel after params    =
channel daemon name    = 10.8.51.126
channel user name      =
urgentnotices          = 1 2 4 7
normalnotices          = 1 2 4 7
nonurgentnotices       = 1 2 4 7
channel rightslist ids =
local behavior flags   = %x0
expandchannel          =
notificationchannel    =
dispositionchannel     =
tlsswitchchannel       =
backward channel       = tcp_local
unique identifier      = [email protected]
header forward address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
envelope rev address   = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
name                   =
mbox                   = bhanu.prasad
Extracted address action list:
    [email protected]
Extracted 733 address action list:
    [email protected]
Address list expansion:
*** Debug output from alias expansion:
17:09:37.76: Inner expand, level = 0, mailbox = [email protected]
17:09:37.76: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.76: Rewrite: "$*", position 0, hash table -
17:09:37.76:   Found: "$A$E$F$U%[email protected]"
17:09:37.76:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.76:     old state = not checked.
17:09:37.76:     Domain check on xyz.com.
17:09:37.77:     Could not add domain result 0 to cache for xyz.com.
17:09:37.77:     new state = fail pending.
17:09:37.77:   Rewrite failed due to prechannel mismatch.
17:09:37.77: Rewrite: "$*", position 1, hash table -
17:09:37.77:   Failed.
17:09:37.77: Rewrite: "$*", position 0, rewrite database -
17:09:37.77:   Failed
17:09:37.77: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.77: Rewrite: "xyz.com", position 0, hash table -
17:09:37.77:   Failed.
17:09:37.79: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.79:   Failed
17:09:37.79: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.79: Rewrite: "*.com", position 0, hash table -
17:09:37.79:   Failed
17:09:37.79: Rewrite: ".com", position 0, hash table -
17:09:37.79:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.79:   New mailbox: "bhanu.prasad".
17:09:37.79:   New host: "xyz.com".
17:09:37.79:   New route: "TCP-DAEMON".
17:09:37.80:   New channel system: "TCP-DAEMON".
17:09:37.80: Looking up host "TCP-DAEMON".
17:09:37.80:   - found on channel tcp_local
-13 expansion total.
*** Debug output from submitting an envelope address:
17:09:37.80: mmc_wadr(0x0017ae68,'[email protected]','[email protected]') called.
17:09:37.80: Copy estimate before address addition is 1
17:09:37.80:     Parsing address [email protected]
17:09:37.80: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.80: Rewrite: "$*", position 0, hash table -
17:09:37.81:   Found: "$A$E$F$U%[email protected]"
17:09:37.81:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.81:     old state = not checked.
17:09:37.81:     Domain check on xyz.com.
17:09:37.81:     Could not add domain result 0 to cache for xyz.com.
17:09:37.81:     new state = fail pending.
17:09:37.81:   Rewrite failed due to prechannel mismatch.
17:09:37.81: Rewrite: "$*", position 1, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "$*", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
xyz.com", literal = "", tag = ""
17:09:37.83: Rewrite: "xyz.com", position 0, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
.com", literal = "", tag = ""
17:09:37.83: Rewrite: "*.com", position 0, hash table -
17:09:37.84:   Failed
17:09:37.84: Rewrite: ".com", position 0, hash table -
17:09:37.84:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.84:   New mailbox: "bhanu.prasad".
17:09:37.84:   New host: "xyz.com".
17:09:37.84:   New route: "TCP-DAEMON".
17:09:37.84:   New channel system: "TCP-DAEMON".
17:09:37.84: Looking up host "TCP-DAEMON".
17:09:37.84:   - found on channel tcp_local
17:09:37.84:       - adding address [email protected] to headers.
17:09:37.86:       - orig_send_access mapping check: tcp_local|abhishek.sen@extm
ail.xyz.com|tcp_local|[email protected]
17:09:38.16:         - failed.
17:09:38.16: Good address count 0 defer count 0
17:09:38.16: Copy estimate after address addition is 1
17:09:38.16: mmc_waend(0x0017ae68) called.
17:09:38.16:   Copy estimate is 1
17:09:38.16:   Queue area size 73232902, temp area size 2067288
17:09:38.16:   36616451 blocks of effective free queue space available; setting
disk limit accordingly.
17:09:38.16:   1033644 blocks of free temporary space available; setting disk li
mit accordingly.
Expanded address:
[email protected]
Submitted address list:
Address list error -- 5.7.1 Relaying not allowed: [email protected]
Submitted notifications list:
=========================================================================Do we have to make any changes on other config files except the imta.cnf and mappings file for inbound and outbound..
thanks for any help
Edited by: prasad0_0 on Jul 8, 2008 4:58 AM

i have already setup the messaging server 6 months back.. followed the same procedure to route mails to a gateway..
made changes to the imta.cnf for outbound mail flow to the tcp_local and mappings file to accept inbound mail flow from the gateway. Its working perfectly on the older setup, but this now, have issues with new setup.
here is the imta.cnf file..
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
P1192FLPLN.extmail.xyz.com $U%[email protected]
extmail.xyz.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.extmail.xyz.com $U%$H.extmail.xyz.com@tcp_intranet-daemon
* $U%$&0.extmail.xyz.com
! reprocess
reprocess $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
reprocess.P1192FLPLN.extmail.xyz.com $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
! process
process $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
process.P1192FLPLN.extmail.xyz.com $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
! defragment
defragment $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
defragment.P1192FLPLN.extmail.xyz.com $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
! conversion
conversion $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
conversion.P1192FLPLN.extmail.xyz.com $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
bitbucket.P1192FLPLN.extmail.xyz.com $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 logging defaulthost extmail.xyz.com extmail.xyz.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7
P1192FLPLN.extmail.xyz.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck daemon 10.8.51.126
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp flagtransfer
!tcp_lmtpss-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold
hold-daemonand mappings file..
! MTA mappings file
! for access control and other table lookups
FROM_ACCESS
! Entries to block certain submissions normally would be inserted here,
! above the ntended-to-be-final entries that while permitting submission,
! merely disable any potential "vacation" effect.
! The following entries disable Sieve "vacation" action on lists sorts
! of addresses, as recommended by the Sieve "vacation" extension draft.
   *|SMTP*|*|*|MAILER-DAEMON@*|*    $!$Y
   *|SMTP*|*|*|LISTSERVE*@|*        $!$Y
   *|SMTP*|*|*|majordomo@*|*        $!$Y
   *|SMTP*|*|*|*-request@*|*        $!$Y
   *|SMTP*|*|*|*-owner@*|*          $!$Y
   *|SMTP*|*|*|owner-*@*|*          $!$Y
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(10.8.55.49/24) $Y
$(10.8.51.125) $Y
$(10.8.51.126) $Y
127.0.0.1 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
<IMTA_TABLE:mappings.localewe are able to receive mails from the gateway, but when using uwc to send the mail, the mail doesnt hit the gateway. trying a telnet from the messaging server to the gateway, works perfectly.
thanks in advance.

Cannot send e-mail ...restricted relaying not allowed

Hi, I installed and activated the mail programm according to the instruction by SWISSCOM. I can receive mail und I can send mail to [email protected] but if I send a mail to [email protected] I get a message: e-mail cannot be sent via server "smtpauth.bluewin.ch" .... restricted relaying not allowed! How can I sold this problem? Thanks. kingfilou

Who is the Systemadministrator?
It appears to be kingfilou!
Hmm, seems there directions differ...
Enter the number 587 into the "Outgoing server (SMTP):" field.
Click "OK" then "Close".
... set up to use SMTP authentication. You can now increase the security level, and transmit your e-mails via an SSL encrypted connection. The SSL (Secure Socket Layer) protocol makes the data stream "tap-proof".
You must make the following settings:
Incoming server (POP3): pop3s.bluewin.ch
Outgoing server (SMTP): smtpauths.bluewin.ch
... enter the number 465 into the "Outgoing server (SMTP):" field. Check the option "This server requires an encrypted connection (SSL)".
Type the number 995 into the "Incoming server (POP3):" field. Check the option "This server requires an encrypted connection (SSL)".
These directions are foe Outlook on a PC, but should be the same for you...
http://tinyurl.com/czsnys
Apple Mail for that ISP...
http://www.libellules.ch/support/creercompte_applemailen.php

Treo Pro Error Message 530 5.7.1 Relaying not allowed cannot send Email from pop acct

I just purchased the treo pro thru Sprint. I love the phone I just cant seem to figure out the proper settings for my outgoing POP Email acct. Every time I set up the settings properly and attempt to send an email I get an error message "530 5.7.1 Relaying not allowed". I get this message with the outgoing server set to smtp.sprintpcs.com and i receive this error message through an "undeliverable" Email in the same account I am attempting to send from. When I have the account set to my ISP's outgoing server mail.optonline.net it will only send email if I have my device set to WIFI mode..... Any ideas? Thanks.
-Jay-
Post relates to: Treo Pro T850 (Sprint)
This question was solved.
View Solution.

audiojay11 wrote:
P.s. I read in another posting where it advises to change the outgoing port # from 25 to 587. This sounds very familiar to me because when I recently set up my blackberry I believe cablevision advised me to do that exact modification. Now here is the million dollar question. How do you change the port #'s on the treo pro?
Try adding it to the server name, e.g.: smtp.provider.com:587

'550 5.1.1 relaying not allowed ...how to resolve?

Using Outllook 2013
can send ONE email Ok,, but as soon as I have CC or BCC I get this message
550 5.1.1 relaying not allowed
any ideas?
thanks

Hi,
Please confirm if the issue only happens when the message is CC or BCC to other users. Also confirm if the issue happens to all users or only specific users, internal users or external users.
Also check whether there is any transport rule in Exchange server.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

E-mail error message relaying not allowed

New MacBook Pro user on the roaqd for the first time. using different web connections and unable to send or recieve e-mail...keep getting message "relaying not allowed" Read other forum answers but no help for a dummy

This is probably an issue with whatever provider you are using on the road to connect to your email provider's server. If it is a hotel or such, try asking how (or if) you can use your own account. Otherwise, it may be a managed connection that allows only selected users to use it.
IOW, you will have to ask the administrator or equivalent for help.

An error occurred while sending mail. The mail server responded: Relaying not allowed.

Suddenly I am not able to send any email from my account, from pc or phone.
It gives error message "An error occurred while sending mail. The mail server responded: Relaying not allowed. Please check the message recipient --------and try again."
I have checked account setting and is correct. please help

This message, which comes from the server, usually means that you are using an smtp server provided for use with one particular account to send messages "from" other accounts. The fact that it also happens with your phone does indicate that it is external to Thunderbird.
How many different email accounts do you have? How many different providers are involved?

Adobe Acrobat 7: Can not insert pages, changing the document: Not Allowed, but Security Method set t

In Adobe 7, I need to add some pdf pages to the end of a document, but the insert pages (as well as all other items under Document> are greyed out.
On the document properties\ Security> the document restrictions summary says "Changing the Document: Not Allowed", but the Security Method in the drop down above is set to "No Security"
Thanks!

If there are form fields, then whoever added them probably used the forms menu, not the Acrobat form fields. Thus the PDF was converted to Designer and you are out of luck. The FORMS button found in various places in Acrobat 7 and latter takes you to Designer, not the Acrobat form tools. The latter are located in the tools menu.

Relaying not allowed

Gentlemen,
when a user attempts to have his message relayed thru the MS, that message arrives at tcp_local and is rejected, without any warning being sent to the user.
Is it possible to have the "5.7.1 Relaying not allowed " message returned to the user? How?
TIA
Ivo Ramos

I'm VERY sure that the error message was provided to the smtp client that was connected to the server.
If that client didn't inform the user, that's not truly our problem.

JavaMail : relaying not allowed : Help needed

I have developed an E-mail client application using the JavaMail API.
Whenever i tries to send mails using any SMTP server, i got the error
message "relaying not allowed Invalid address". I have tried even with
authentication also, with more than 5 different SMTP servers. Please help me solve the problem or suggest me few more SMTP service providing sites that i can use to send messages.
Thanks

Obviously you have an ISP since you have an Internet connection--where do you send your mail? Whichever smtp server you are using for your PC mail application, you should use for your mail program.
Of course, if you are trying to write some kind of spam bot, you are pretty much screwed. You'll have to get your own mail server. People generally won't relay mail.

Relaying not allowed (+ solution)

I've been using Mail to send emails via my ISP's smtp server without any problems for months, then suddenly today it won't let me send anything and gives me the error message: "relaying not allowed" and something about requiring "SMTP AUTH". Anyone else had this?
The good news is that it's easy to solve: in Mail, go to Preferences, chose the Account Information preferences, and click on "Server Settings...". In the new window, select "Password" as the Authentication method, then fill in the username and password you use with your ISP.
So clearly my ISP has started requiring password authentication to send messages as well as to receive them. It would have been nice if they'd sent me a message to let me know!
iMac G5 Rev A Mac OS X (10.3.9) MacBook 2.0GHz Mac OS X (10.4.6)

I can mark this question as answered because I answered it in the question!

HT1937 My Iphone 3GS has just restored and I completed the things on the Iphone and then it says no sim card activated and I tried everything it said if it does not work, but nothing seems to work.

My Iphone 3GS has just restored and I completed the things on the Iphone and then it says no sim card activated and I tried everything it said if it does not work, but nothing seems to work?

All iPhones require a SIM for activation.
Insert a SIM in the iPhone.

Can not send emails says relaying not allowed

I am trying to access my mail account on my I pad. I have put all the settings in and outgoing smtp but when I send it goes straight to outbox saying it does not allow relaying. What have I done wrong?

Hi KP
Sorry, not compoletely iPad friendly, but have had the original iPad for some time, but am constantly getting the issue around relaying. Have tried the optional email account name and pw in the SMTP server, but alas the Orange pop account seemed to have scuppered me to date! Any help / suggestions most appreciated, cheers.

Relaying not allowed but mappings seem fine

Similar Messages

Maybe you are looking for