Release strategy of contract disappeared after using of  MEMASSCONTRACT

Hi  All,
May be some one can help me?
I have next problem it tr. MEMASSCONTRACT(ECC6)
Release strategy of contract disappeared after using of tr. MEMASSCONTRACT. I know why it happened, but I don't know how to correct it. Some time ago IN ECC5 we added a field to a table EKKO and used this field as one of characteristics in the release strategy of contracts. In order to transfer value of this field to field CEKKO-USRC1 we used User Exit EXIT_SAPLEBND_002. This User Exit is suitable only for online transactions (ME31K, ME32K). How can I feel field CEKKO-USRC1 in transaction MEMASSCONTRACT?
Regards, Liza

Thank you. Probably I didn't explain my problem clearly. It's section of code from User Exit EXIT_SAPLEBND_002:
ATA: reference(20) TYPE c VALUE '(SAPMM06E)EKKO'.
DATA: it_ekko TYPE ekko.
FIELD-SYMBOLS: <ymm_icl> TYPE ANY.
e_cekko = i_cekko.
*THE "ICL Contract" FIELD IS ONLY RELEVENT IN THESE TRANSACTIONS
IF sy-tcode EQ 'ME31K' OR sy-tcode EQ 'ME32K'
OR sy-tcode EQ 'ME33K' .
  ASSIGN (reference) TO <ymm_icl>.
  it_ekko = <ymm_icl>.
  e_cekko-usrc1 = it_ekko-ymm_icl.
ENDIF.
Program SAPMM06E can only be reffered while using online transactions. Mass transactions does not use these program and it is completely class based. So,  may be someone know how can i do the same , but for tr. MASS in ECC6.

Similar Messages

  • Purchase Order not subject to release strategy for contract rel. strategy

    Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
    So I have checked this release strategy with this codes:
    CL24N ok,
    CT04 ok,
    CL30N ok,
    CL20N ok,
    Release simulation in release strategy works,
    Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
    Thank you for your help in advance.

    I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
    I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
    Also compare your release strategy settings with many existing documents in SCN.
    Check your Classification should be like that.
    You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract.

  • Configure Release Strategy for Contract

    Hi All,
    I want to Configure Release Strategy for Contract.
    I have configured Release Strategy  for PO. Is the process for both is similar?
    What should the table & field name should we use for configuring Release Strategy for Contract.
    Pls. guide.
    Regards,

    Thanks Neeraj for the reply.
    For PO, I have used Table CEBAN, Field BSART, GNETW.
    Could you pls. suggest what fields should we use.
    Also tell me what would be process of releasing the contract using ME35K, as the Screen seems to be different from ME29N.
    Regards,

  • Why do the rulers (cmd R) disappear after using Print (cmd P) ?

    Why do the rulers (cmd R) disappear after using Print (cmd P) ?

    If you are referring to Pages v5.2.2 on Mavericks, or v5.5.1 on Yosemite — the rulers do not disappear in the Pages document when using the Print (cmd+P) keyboard shortcut. The document horizontal rules are temporarily obscurred by the drop down print dialog sheet.
    I observe no evidence of disappearing rules unless they are forced via the cmd+R keyboard shortcut.

  • Music disappeared after using Syncios

    Some tracks in the default Music app disappeared after using Syncios (http://www.syncios.com/) with my iPhone.
    What I did:
    I opened Syncios 4.1.1 with the iPhone 5 connected. Per the recommendation, I did not use iTunes at the same time.
    Details:
    Syncios 4.1.1
    iPhone 5
    iOS 8.0.2
    Windows 7
    Could someone please advise on how to recover the disappeared tracks and how to prevent this issue in the future?
    I've also contacted Syncios support but in the meantime am wondering if anyone here can help.
    Thanks!

    I also wanted to note that the tracks that disappeared appear to have been downloaded from the cloud. So I can re-download those tracks, but if anyone knows how to prevent this issue in the future, your input would be much appreciated.

  • Release Strategy for Contract is not getting picked whereas it is ok for PO

    Dear Experts,
    I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
    I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
    Kindly resolve the issue.
    Satish

    S0004830404 wrote:
    Dear Experts,
    >
    > I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
    > I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
    >
    > Kindly resolve the issue.
    >
    > Satish
    hi,
    use create other characteristic for value CEKKO-GNETW in this use the mk , wk values in value field and assign this characteristic to your class and save.
    Thanking you

  • Release Strategy for contracts.

    Hi gurus,
    Good day,.
    Please help on this.
    We have a release strat for Contract. It is working fine when a contract is created, but when several changes were made on the Quantity, release srtat are not being triggered.
    Example.
    Contact created with qty 1000 --> release status is blocked. Then release it in ME35.
    After releasing, quantity was updated to 1200--> release status is blocked. Then release it in ME35.
    After releasing, quantity was updated to 1100--> release strategy was not triggered. Status was released.
    what is the standard functionality for this? Should the decrease in quantity will trigger release strategy or not?
    Thank you.

    Dear Acel,
    The example you given was working just fine and correct.
    a)Contact created with qty 1000 --> release status is blocked. Then release it in ME35.
    b)After releasing, quantity was updated to 1200--> release status is blocked. Then release it in ME35.
    c)After releasing, quantity was updated to 1100--> release strategy was not triggered. Status was released.
    -> The release strategy will only be reset if the total net value for the contract was higher the previous
    value but not lower.
    As your example, quantity was updated to 1200, then it will reset when changing from 1000
    to 1200. However when it was decrease to 1100, then it will not reset anymore as you had
    release it for a quantity of 1200, then the total net value should higher than the current qty = 1100.
    In system, it always assume if you had approved for the total value of the higher 1 before, then
    it should be fine for the lower total net value for your management and therefore not need to re-approve
    again for redundancy job. This was very logic in common business scenario in many companies.
    However, like in your example , if you had define a different release strategy for a value that met the
    the 1100 quantity, it will redermine the different release strategy. For example:
    USD 1 for every quantity = 1
    Then your contract will be USD 1000 for quantity = 1000, USD 1100 for quantity = 1100 and
    USD 1200 for quantity = 1200.
    Release strategy A for 1000 , characteristics from USD 1000- lower than 1100
    Release strategy B for 1100 , characteristics from USD 1100- lower than 1200
    Release strategy C for 1200 , characteristics from USD 1200 onwards
    Then if you change the quantity from 1200 to 1100, it will redetermine the release
    strategy B which means from Release strategy C to Release strategy B. If you
    only had Release strategy C that had a characteristics from 1000-1200, then
    it will keep the Release strategy C as released and it won't be reset unless
    if you had change it and the condition of the total net value was higher than any value
    before.
    Hope this will explain the logic.
    Ian Wong

  • Release strategy does not reset after PO change - tried changeability 4 & 6

    Hi,
    After my PO is released, I change the item quantity/price such that the net PO value (increased) is changed MORE than the tolerance % set in the changeability.  I expect that the PO release should be reset but it does not.
    However if my PO value is changed (increase) such that my PO value is now in a different "release bracket/range" -- as it falls into a different release strategy, then the release is reset.
    Could anyone advise me what is wrong?  I tried everything - i tried changeability = 4 and 6. i deleted the whole release class, release strategies and recreated -- nothing.
    According to OSS note 493900 below, it should reset when the tolerance % is breached.
    I'm on SAP 4.7.
    Anyone could advise?
    thanks!
         3.  Question :
         Why is the release strategy not reset ?
         Answer :
         A reset of the release strategy only takes place if
                -  the changeability of the release indicator is set to '4' in
                   case of a purchase requisition and '4' or '6' in case of
                   another purchasing document (purchase order, request for
                   quotation, contract, scheduling agreement),
                -  the document is still subject to the previous release
                   strategy,
                -  the new TOTAL NET ORDER VALUE is higher than the old one.
         The total net order value is linked to CEKKO-GNETW for a purchase order,
         CEBAN-GSWRT for a purchase requisition item-wise release and CEBAN-GFWRT
         for a purchase requisition overall release.
         If you have maintained a Tolerance for value changes during release
         (V_161S-TLFAE), the release strategy is reset when the value of the
         document is higher than the percentage you have specified and if the
         document is still subject to the previous release strategy.

    Hi,
    Thanks.
    The release strategies are able to be determined correctly when the PO is created so I guess that means its all setup correctly?
    The issue is only with PO change - how to cause the reset when the PO value increases by more than the tolerance %.
    cheers.

  • Release Strategy for Contract

    Hello Experts
        I am using release starategy for contract and using communication structure CEKKO in characteristics. I want to use other parameter such as material master number (MATNR) for characteristics. I see that CEKKO has component .INCLUDE (Communication Structure: PO release for User Exit). Does any one know how to use it in characteristics and if I use it can I design release strategy for particular materials?
    Thanks
    Ankit

    this has been discussed multiple times on this forum - "Release strategy at item level for purchasing docs - PO/SA/Contract" not possible...
    refer below threads
    Why release strategies for PO at header level only
    PO Release Strategy
    Release strategy - item level
    yogesh

  • Re-set release strategy of rejected PO,after doing respective changes to po

    Hi friends,
    I have created release strategy for Purchase order with release indicator 6 (Changeable, new rel. if new strat. or value change/outputted), and with 3 release codes (3 approvers)..
    Now in this case, After Rejection of a approver (creator of po will get an mail telling that its rejected). After rejection, the creator has did required changes and save the PO.
    However the release strategy is not reset...So i want to know how to reset the release strategy in this case..
    Where as in case after the approval, if creator do any changes in purchase order then release strategy is resets...  
    Here PO printout is possible only after the final approval...
    Pls give some inputs in fixing this issue..
    Thanks in advance....
    Regards
    Shashidhar...

    Hi
    What are the characteristics of your strategy?
    Try to change one of them save and then rechange it to the original
    eg.
    If the strategy depends for example on the Purchasing Group (PG)
    i mean according to different PG's different strategies working
    then with ME22N change the PG save and rechange it again to the original.
    or
    for example If the strategy depends on Materail Groups (MG)
    then do the change with MG
    With ME22N change the MG save and rechange it again to the original.
    I guess this will trigger the strategy again.
    Hope it helps
    Best Regards

  • Release Strategy in Contract

    Hello Guru
    I have Created a Contract and when ever i want to change the Contract my release Strategy has to be re triggered and my version management is Active.
    I tried to change the Value in Contract and when i do change the Value and if i ticked the Version on the Header of the Contract then my new release Strategy has to be re triggered but its not happening. when i checked the tick box in version in Contract it is saving but when i come out of the Contract it is showing unticked again.
    I am unable to re trigger the Contract and if i tick the Version in the header of the Contract when i close it untick the verison it is not saving, how can i do this, please let me know
    Sreedhar

    Release strategy will trigger again when the version will be completed.
    You have to tick the flag as version complete for contract, only the release strategy will be reset.
    Be sure you release indicator has the Changeable as 6.
    Then make the version complete for release strategy as below :
    Once you will click the version complete flag, then version complete tick will also displayed.
    Have a look into the similar discussion Re: Release changeable indicator 6 not working

  • JPopupMenu won't disappear after using it!

    I'm using a JPopupMenu on a JTable. When I rightclick on a line in my table, I display a dialogbox to make some selections which you can close by clicking an OK button. The problem is, that when I close the dialog box the JPopupMenu won't go away. More exact: Parts of it persist on the screen, but it is more like a background image, since it then is no longer functional (menu items are not highlighted etc.). Does anybody know a workaround to this problem why the pop up menu doesn't go away after using it?

    Have you tried firepopupMenuCacelled() ??
    This is a method of JPopupmenu that notifies listeners that it hacs been cancelled.... ??
    Or maybe a mouse removed listener event to close the JPopupMenu... ??

  • Inverse Kinematics - stroke disappears after using Bone Tool...

    Hi,
    I'm trying to use Inverse Kinematics on a shape. I'm using a shape and when I use Bone Tool on one of the arms which is a shape, the stroke on it disappears on some machines while it doesn't on the others... (they're all iMac's).
    I'm using the same Flash version on iMac's and the same file.
    Here's the screenshot:

    Positive. In fact, I decided to transform it before applying the bone tool this time and....same result. After applying the bone tool, any time I try to manipulate it, the bulk of it vanishes, but the bone tool joints remain.

  • HD icon disappeared after using Front Row

    I'm using my wife's laptop, and for the first time (I'm guessing) we launched Front Row. I exited the program almost immediately, and found the the internal drive icon is missing from the Finder (including the sidebar)
    I have tried using
    SetFile -a V /
    SetFile -a V /Volumes/Macintosh\ HD
    I've tried deleting Finder prefs, although the problem occurs in all accounts. (including root)
    I logged out, and back in after every attempt.
    The only way I can view the icon is by setting Finder to view all invisible files.
    This is on a MBP 2.4ghz, 10.5.1

    Thank you, I think there was a combination of issues for me.
    The first was a strange error when I was trying SetFile as an administrator, I got a -5000 error, and a -43.
    Even when I had enableb the root user account, and was su, I guess I was using the 'V', not v. The man page documentation, and the --help for SetFile wasn't very helpful.
    Now, for why it may have become invisible. I did do one other thing to the drive, but it certainly didn't cause it to disappear right away.
    I removed some Spotlight comments that seemed like garbage to me, it was a series of numbers, such as: XXXX-XXXX
    That may have been what started my problem, not Front Row.
    Excellent page on invisible files, btw! Thanks!!

  • Emails disappearing after use of Tablet

    Occasionally when using just my laptop emails do not appear in Outlook 2007 even though I subsequently find them in webmail. This only seems to have become a problem in the last year or so. That's a bad enough problem. (My email is set up as POP3).
    However, I also find that if I read my emails first on my Samsung Galaxy Tab 2 10.1 some do not subsequently appear in Outlook. I have my email on the tablet set to NOT sync (because I only use it occasionally and do not want loads of emails pouring in when I do turn it on) and to retain emails on the server. 
    The problem has just become very bad with about half of 30 emails not arriving in Outlook after 3 days use of the tablet. Indeed half of the missing emails were not even in my InBox on webmail but were in Deleted, even though I hadn't even deleted them on the tablet.
    What is going on and how do I solve it?

    Thurza wrote:
    Thanks. It is never easy with intermittent use, I know. Could you explain the logic behind your suggestion?
    If you change your password and only update Outlook then only Outlook will be able to download your emails.  If your problem disappears then it shows that some other device has been accessing your emails but is no longer doing so because of the change in password. 
    Depending on the results you get we can take it further from there as otherwise we have a lot of What Ifs .

Maybe you are looking for

  • Issuw with dunning

    Hi All, I have an issue with dunning.  The said customer has a base line date / due date as 24.11.2008 and in the dunning procedure the first level states to dun 21 days prior ( ie 21- ), so the date on which the first letter to get generated is 03.1

  • Mac Mini, no video after 10.5.7 upgrade

    I installed the 10.5.7 upgrade after reboot, had no video. I reset the smc and pmu then I got no power light and the fans raced. Reset pmu again and mini booted to grey screen with spinning indicator, then after a min or two the mac would just shut d

  • Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)

    I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS) upon Import. Can anyone shed some light f

  • Will USA VPN Work for Skype Number while in Playa ...

    We just moved to Playa del Carmen and unfortuntely there is no area code for this part of the country. We do have a VPN that runs out of California. Since this the case could we use a California area code for our skype number and people will be able

  • How to download photos from Galaxy 2 Jellybean to MacBook Pro OS 10.8.4 iPhoto?

    Photos on Galaxy 2 Jellybean can be downloaded via USB cable & Kies app to MacBook Pro Photo file, but not iPhoto.  How to download photos from Galaxy 2 directly into iPhoto?